Restoring TWRP backup resulted in QCom Crash dump screen - OnePlus 6 Questions & Answers

I had some problems regarding google not syncing contacts and wanted to restore my TWRP backup I made yesterday. I have been on Official Pie with magisk. I simply restored my backup and now the phone immediatly crashes to the qualcom crash dump screen. I still have access to custom Recovery though, using latest blue_spark. Why did this happen and how can I fix it? Did I restore something wrong? I used the original settings. Is it the weird partitioning which is causing this?

So I had this happen to me a couple of times last weekend when attempting to upgrade to Pie. On a couple of occasions I couldn't get past the Dump screen, no matter what I did - just used the MSMTool to restore my phone to factory. However, in one instance, I could boot into recovery. Unfortunately, this happened to me so many times last weekend, I forget how I solved it when I could boot into TWRP. I may have just flashed the OnePlus Pie 9.0 zip again. I assume your backup was also Pie?

azsl1326 said:
So I had this happen to me a couple of times last weekend when attempting to upgrade to Pie. On a couple of occasions I couldn't get past the Dump screen, no matter what I did - just used the MSMTool to restore my phone to factory. However, in one instance, I could boot into recovery. Unfortunately, this happened to me so many times last weekend, I forget how I solved it when I could boot into TWRP. I may have just flashed the OnePlus Pie 9.0 zip again. I assume your backup was also Pie?
Click to expand...
Click to collapse
Yeah, I'm in a similar situation. I was just able to boot into TWRP several times back and forth, wiped everything and installed clean Pie.zip. Now I get a screen saying device is corrupt press power button. If I press the power button twice, it boots into the rom just fine. So the phone works and all, to bad you can't restore backups anymore though. Now I just need to remove this darn corrupt screen, its super annoying.

baxtex said:
Yeah, I'm in a similar situation. I was just able to boot into TWRP, wiped everything and installed clean Pie.zip. Now I get a screen saying device is corrupt press power button. If I press the power button twice, it boots into the rom just fine. So the phone works and all, to bad you can't restore backups anymore though. Now I just need to remove this darn corrupt screen, its super annoying.
Edit:
Reflashed TWRP and the corrupt screen disappeared. Now all is well again. Now where did I put that titanium backup...
Click to expand...
Click to collapse
I had that happen too. It was an absolute mess and I wasted my Sunday fixing it. I think the only way to get rid of that message is to use the MSMTool. I believe I read that in one of the posts on the Pie thread.
EDIT: Just read your Edit - that's good news. Wished I would have tried that.

azsl1326 said:
I had that happen today. It was an absolute mess and I wasted my Sunday fixing it. I think the only way to get rid of that message is to use the MSMTool. I believe I read that in one of the posts on the Pie thread.
Click to expand...
Click to collapse
Darn it... I'l think I'l pass for now. I briefly looked at the unbrick guide thread but there wasn't any clear instructions on how to do it.
Funny thing, this is the first timeI had so much problems with flashing stuff on, and here I thought it would be easy, that this was a "developer friendly" phone. :S
Edit: I was mistaken, probably only fixed it temporarly when I flashed new recovery.

baxtex said:
Darn it... I'l think I'l pass for now. I briefly looked at the unbrick guide thread but there wasn't any clear instructions on how to do it.
Funny thing, this is the first timeI had so much problems with flashing stuff on, and here I thought it would be easy, that this was a "developer friendly" phone. :S
Click to expand...
Click to collapse
Yea, the whole a/b partition messed up developer friendly....at least initially. I have spent more time fixing flashes gone bad than I have for all of my other android phones combined. It seems to have settled down now though. Although, I haven't tried any other ROMs outside of OOS. On my prior phones, I would have no problem switching between them often.
The MSMTool isn't that hard. The instructions look intimidating. However, here's what I did when I got the Qualcomm dump screen.
- Open MSM Tool
- Open Device Manager and looked for Ports and the phone.
- Held down Power + Volume Up on the phone
- Waited for the Port (for the phone) to change under the Ports tab in Device Manager
- MSMTool should start downloading. Just let it finish and then you should be good to go

azsl1326 said:
Yea, the whole a/b partition messed up developer friendly....at least initially. I have spent more time fixing flashes gone bad than I have for all of my other android phones combined. It seems to have settled down now though. Although, I haven't tried any other ROMs outside of OOS. On my prior phones, I would have no problem switching between them often.
The MSMTool isn't that hard. The instructions look intimidating. However, here's what I did when I got the Qualcomm dump screen.
- Open MSM Tool
- Open Device Manager and looked for Ports.
- Held down Power + Volume Up on the phone
- Waited for the Port (for the phone) to change under the Ports tab in Device Manager
- MSMTool should start downloading. Just let it finish and then you should be good to go
Click to expand...
Click to collapse
I agree.
Oh really? Because there were links to all shady chinese files all over the place. I'm refering to this thread:
https://forum.xda-developers.com/oneplus-6/how-to/guide-mega-unbrick-guide-hard-bricked-t3796051
Thanks a lot for your help!

baxtex said:
I agree.
Oh really? Because there were links to all shady chinese files all over the place. I'm refering to this thread:
https://forum.xda-developers.com/oneplus-6/how-to/guide-mega-unbrick-guide-hard-bricked-t3796051
Thanks a lot for your help!
Click to expand...
Click to collapse
Yea, I saw that thread too. I just download the tool, MsmDownloadToolV4.0InternationalVersionOxygenOS5.1 .5.rar and ran it. Didn't need anything else and everything fell into place.

azsl1326 said:
Yea, I saw that thread too. I just download the tool, MsmDownloadToolV4.0InternationalVersionOxygenOS5.1 .5.rar and ran it. Didn't need anything else and everything fell into place.
Click to expand...
Click to collapse
Again, thanks a million! Will try it next time I mess up this phone. (soon probably)

Related

[Q] Strange bootloop issues

Kinda new to this so forgive me if i miss something somewhere and if i need to give more information somewhere just let me know.
With that out of the way I'd like to start with the fact that this is my first rooted device. Currently on C-spire (cellular south) if that matters.
A few days ago before the phone was rooted or even unlocked i went to make a phone call and the screen blacked out and a few seconds later went into a reboot loop where it would get to the Motorola Logo for about 6 seconds or so then shut off and try again ad nauseam until the battery died. After letting the battery die and connecting it to the charger it continued the loop so after a quick gogle search I began fiddling with buttons and realized i could boot into fastboot and recovery modes. I decided i might as well root since it couldnt get a whole lot worse and after a quick look around the forums and a trip to motorola to unlock my phone i was able to flash TWRP recovery, after which i accidentaly wiped the os, managed to find any number of replacement roms none of which solved the boot issue. I eventually found the stock Sprint roms which allowed the phone to boot and work for the most part, but it wont send media messages and has trouble picking up 4g service. I am also forced into using the sprint updater among other things which include having sprint plastered everywhere I have tried flashing several custom roms (pacman, paranoidandroid, and cyanogen) all of which get hung up booting just like the phone did before but the sprint stock rom will reload and work just as before. I'm not sure what would be causing this or if there is a way to fix it and i apologize for the wall of text. If any more info is needed let me know and ill provide ot to the best of my knowledge. Thanks in advance :fingers-crossed:
So all ROM's fail to boot?
Are you doing a factory reset in TWRP before you boot?
Are you flashing gapps? Although that shouldn't cause the phone to fail at booting...
Correct. All roms except the stock sprint rom fail to boot.
Now that i have everything backed up on my external sd I've tried factory reset using twrp as well as wiping everything prior to flashing a ROM as well as after but
Before booting. And the many combinations thereof
And yes i am flashing gapps.
You don't get any errors when it flashes?
Did you check the md5sums?
I flash around a lot, and just got another Q - latest ROM's are not a problem here.
arrrghhh said:
You don't get any errors when it flashes?
Did you check the md5sums?
I flash around a lot, and just got another Q - latest ROM's are not a problem here.
Click to expand...
Click to collapse
I haven't gotten any errors while flashing. Not quite sure how to check the the md5 sums though
AMerexican said:
I haven't gotten any errors while flashing. Not quite sure how to check the the md5 sums though
Click to expand...
Click to collapse
Every ROM should include a md5sum with it. If you're on Windoze, use a program like WinMD5 - check the md5sum locally, and compare it to what is on the server. If they match, the download is probably good.
So after checking the pacman rom matched up (it's the most recent one I've tried), the cyanogen didnt
but i recently redownloaded it and its better now (haven't tried flashing yet), and I can't seem to find the MD5sum for
the paranoid android rom on here.
Anything else i should try?
AMerexican said:
So after checking the pacman rom matched up (it's the most recent one I've tried), the cyanogen didnt
but i recently redownloaded it and its better now (haven't tried flashing yet), and I can't seem to find the MD5sum for
the paranoid android rom on here.
Anything else i should try?
Click to expand...
Click to collapse
The PA build I think is "blind", I don't know if anyone has tried it - additionally, the individual who built it does not own this device... So it's double blind? Haha
The CyanogenMod ROM's, however, are official and work great - many others have confirmed this.
If you had a bad download, that would explain it.
arrrghhh said:
The PA build I think is "blind", I don't know if anyone has tried it - additionally, the individual who built it does not own this device... So it's double blind? Haha
The CyanogenMod ROM's, however, are official and work great - many others have confirmed this.
If you had a bad download, that would explain it.
Click to expand...
Click to collapse
I tried flashing the good download this morning, it hung up just like the others.
I get the bootloader unlocked screen then it'll show the cyanogen logo for roughly 24 seconds the first time before hanging up,
after which it reboots to the bootloader unlocked screen, but when it gets to the cyanogen logo each time gets subsequently shorter between hangups...
Any ideas?
AMerexican said:
I tried flashing the good download this morning, it hung up just like the others.
I get the bootloader unlocked screen then it'll show the cyanogen logo for roughly 24 seconds the first time before hanging up,
after which it reboots to the bootloader unlocked screen, but when it gets to the cyanogen logo each time gets subsequently shorter between hangups...
Any ideas?
Click to expand...
Click to collapse
I suppose some sort of hardware issue. Like I said, I've flashed most of the newest ROM's here for the Q - all work fine. Hell, some I even ported myself...
I'm kind of at a loss. Can you get adb? Not even sure what to check for next... if you are wiping properly in recovery, that should be sufficient.
Hm, I guess that brings up a good point. Have you tried wiping system, flashing, doing a factory reset, then booting? Most, if not all of the ROM's should wipe /system before flashing... So it probably won't do anything different.
AMerexican said:
I tried flashing the good download this morning, it hung up just like the others.
I get the bootloader unlocked screen then it'll show the cyanogen logo for roughly 24 seconds the first time before hanging up,
after which it reboots to the bootloader unlocked screen, but when it gets to the cyanogen logo each time gets subsequently shorter between hangups...
Any ideas?
Click to expand...
Click to collapse
After the crash during CM bootanimation, boot to recovery and
Code:
adb pull /data/dontpanic/apanic_console
apanic_console should contain the log of the kernel panic, post it here.
kabaldan said:
After the crash during CM bootanimation, boot to recovery and
Code:
adb pull /data/dontpanic/apanic_console
apanic_console should contain the log of the kernel panic, post it here.
Click to expand...
Click to collapse
For my own personal edification, /proc/last_kmsg would work in this instance as well?
Just curious why you went for the apanic_console instead
arrrghhh said:
For my own personal edification, /proc/last_kmsg would work in this instance as well?
Just curious why you went for the apanic_console instead
Click to expand...
Click to collapse
Yes, /proc/last_kmsg would work as well.
Though there's a scenario were it wouldn't be the same - if the user would miss the right time to hold 'volume up' (to get to the recovery after crash) and pressed "power+volume down" to force reboot and try to enter recovery again. In such case, /proc/last_kmsg would not contain the panic from previous boot, the panic would be only in /data/dontpanic/apanic_console.
/proc/last_kmsg - log from the last boot
/data/dontpanic/apanic_console - log from the last crashed boot
kabaldan said:
Yes, /proc/last_kmsg would work as well.
Though there's a scenario were it wouldn't be the same - if the user would miss the right time to hold 'volume up' (to get to the recovery after crash) and pressed "power+volume down" to force reboot and try to enter recovery again. In such case, /proc/last_kmsg would not contain the panic from previous boot, the panic would be only in /data/dontpanic/apanic_console.
/proc/last_kmsg - log from the last boot
/data/dontpanic/apanic_console - log from the last crashed boot
Click to expand...
Click to collapse
Ah, that makes sense - I was not aware of this apanic_console
Thank you!
arrrghhh said:
Ah, that makes sense - I was not aware of this apanic_console
Thank you!
Click to expand...
Click to collapse
I'm getting an error from the forums saying the text is too long. any way around that? or do i need to divide into multiple posts?
AMerexican said:
I'm getting an error from the forums saying the text is too long. any way around that? or do i need to divide into multiple posts?
Click to expand...
Click to collapse
Pastebin.com, hastebin.com, pastebin.ca, heck even put the file in .txt format and attach to this post, upload it dropbox...
Thanks!
arrrghhh said:
Pastebin.com, hastebin.com, pastebin.ca, heck even put the file in .txt format and attach to this post, upload it dropbox...
Thanks!
Click to expand...
Click to collapse
Thanks wasnt sure of the forums rules as far as that was concerned
http://pastebin.com/QFq1naK0
Any ideas?
Or anything else i need to do?

[Help!] XT926 Mega Bricked

Everything is screwed for me. I can't even RSD back to stock. I can access TWRP, but can't wipe System or Data. Fastboot is just there and won't actually push anything. I already have a Moto X now, and I was talking about this issue about a week ago on the Android Development subcat, but I thought I would give it one last go on here to see if I can at least make it a backup.
kungpowchicken said:
Everything is screwed for me. I can't even RSD back to stock. I can access TWRP, but can't wipe System or Data. Fastboot is just there and won't actually push anything. I already have a Moto X now, and I was talking about this issue about a week ago on the Android Development subcat, but I thought I would give it one last go on here to see if I can at least make it a backup.
Click to expand...
Click to collapse
Maybe if you could give some more detail about what exactly you can and can't get the phone to do, what screens can be accessed, and what you did that lead to this condition, we could offer some advice.
Also, no offence to the devs, but twrp is the devil lol. Most issues I have had in the past have led back to it in one way or another, so I never use it. (Just my opinion)
Tappin G2 Style
I can get to the Fastboot screen, I can access TWRP, and I can get the phone to bootloop at the boot animation screen.
I can't push anything through ADB or Fastboot, I cannot mount data or system in TWRP or otherwise. RSD comes back failed every time with every single stock build I use.
Literally two weeks ago, I was in bed, watching TV, with the phone charging. I unlock it to see if I had any notifications, and it kept saying that Nova launcher FC'd. So logically, I rebooted my phone and that's when it started boot looping.
I did nothing to the phone for a couple of hours, it was on the official CM 10.2 11/9 build. I had that ROM running fine for at least 24 hours before it went FUBAR.
kungpowchicken said:
Everything is screwed for me. I can't even RSD back to stock. I can access TWRP, but can't wipe System or Data. Fastboot is just there and won't actually push anything. I already have a Moto X now, and I was talking about this issue about a week ago on the Android Development subcat, but I thought I would give it one last go on here to see if I can at least make it a backup.
Click to expand...
Click to collapse
Is it this problem?: http://forum.xda-developers.com/showpost.php?p=47558893&postcount=47
If so use this solution: http://forum.xda-developers.com/showpost.php?p=47716278&postcount=57
scoobaspeaz said:
Is it this problem?: http://forum.xda-developers.com/showpost.php?p=47558893&postcount=47
If so use this solution: http://forum.xda-developers.com/showpost.php?p=47716278&postcount=57
Click to expand...
Click to collapse
Nope, my status us unlocked: 3. But when I get home, I'll try the mfastboot instead if fastboot.
kungpowchicken said:
I can get to the Fastboot screen, I can access TWRP, and I can get the phone to bootloop at the boot animation screen.
I can't push anything through ADB or Fastboot, I cannot mount data or system in TWRP or otherwise. RSD comes back failed every time with every single stock build I use.
Literally two weeks ago, I was in bed, watching TV, with the phone charging. I unlock it to see if I had any notifications, and it kept saying that Nova launcher FC'd. So logically, I rebooted my phone and that's when it started boot looping.
I did nothing to the phone for a couple of hours, it was on the official CM 10.2 11/9 build. I had that ROM running fine for at least 24 hours before it went FUBAR.
Click to expand...
Click to collapse
i made a modified utility to fix the partition error but need someone to test it please. it should do the process previously suggested automatically through the script.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
bweN diorD said:
i made a modified utility to fix the partition error but need someone to test it please. it should do the process previously suggested automatically through the script.
http://www.mediafire.com/download/987490ykl14j4t8/DROID_RAZR_HD_Utility_1.3.gpt_fix.rar
thanks
Click to expand...
Click to collapse
Testing now.
UPDATE: Still no go.
kungpowchicken said:
Testing now.
UPDATE: Still no go.
Click to expand...
Click to collapse
Well that sux.
Your problem is different than what I made this for but I was hoping it would work for you.
What did it do, fail all the way through?
When I tested it on my phone it reported flashing the partitions ok. There was actually extra text displayed while it was doing it that I didn't put into the script, that's how I knew it was working.
Tappin G2 Style
Failed all the way.
kungpowchicken said:
Failed all the way.
Click to expand...
Click to collapse
im running out of suggestions
if you havent tried to put stock recovery back on yet, how about we try that and see what happens.
if you dont know how to do it through adb, just grab the 1.34 utility from the dev forum, it will push it through fastboot.
something is obviously wrong with twrp, maybe we can fix that first.
I tried flashing even the stock Recovery manually and through the 1.34 utility. Always comes up failed. :sad:
Did you try the manual steps that I posted in my links?
i hope that works, but im doubtful.
the utility essentially flashes exactly as you would manually.
he doesnt have a partition issue, im guessing something is wack with the permissions.
if twrp somehow screwed up the permissions to read only, i believe even the partition file cant overwrite it. i could be wrong.
So I think it has something to do with the Permissions of one or more of the partitions. I just noticed it keeps saying Permissions Denied when I try to fastboot or mfastboot.
kungpowchicken said:
So I think it has something to do with the Permissions of one or more of the partitions. I just noticed it keeps saying Permissions Denied when I try to fastboot or mfastboot.
Click to expand...
Click to collapse
Are you sure you have the snapdragon fastboot? Can't hurt to reinstall it.
Sent from my MB886 using Tapatalk
Also have you tried flashing it manually? (fastboot flash system system.img, etc.)
penser said:
Are you sure you have the snapdragon fastboot? Can't hurt to reinstall it.
Sent from my MB886 using Tapatalk
Also have you tried flashing it manually? (fastboot flash system system.img, etc.)
Click to expand...
Click to collapse
he defiantly has the right fastboot, its in the utility that has been downloaded thousands of times.
if its write protected some how, its not going to flash no matter how you try it.
what i was wondering is if recovery can fix permissions that deep, not sure he said he tried that.
What do you mean with recovery?
kungpowchicken said:
What do you mean with recovery?
Click to expand...
Click to collapse
go into twrp, advanced (i think thats the right section) and look for a line that says "fix permissions" and do it.
Keeps saying it can't mount anything.
kungpowchicken said:
Keeps saying it can't mount anything.
Click to expand...
Click to collapse
thats what i figured would happen

[Q] Did my M8 self-destruct?

Yesterday afternoon at work, I rebooted by m8 (Verizon) and didn't realize there was a problem because I put it back in my pocket before it was fully booted. Next time I looked at it, I had no signal and digging deeper, I saw that the baseband is "Unknown" in settings and the IMEI is "U nkn own". I've tried the RUUs for 4.4.3 and 4.4.4 and can't get the phone to see the IMEI and baseband while booted but both show up fine in hboot/fastboot as shown in the attached pics in the next post. I was running the Viper rom when this happened.
Settings and command prompt pics showing problem
bb1981 said:
Yesterday afternoon at work, I rebooted by m8 (Verizon) and didn't realize there was a problem because I put it back in my pocket before it was fully booted. Next time I looked at it, I had no signal and digging deeper, I saw that the baseband is "Unknown" in settings and the IMEI is "U nkn own". I've tried the RUUs for 4.4.3 and 4.4.4 and can't get the phone to see the IMEI and baseband while booted but both show up fine in hboot/fastboot as shown in the attached pics in the next post. I was running the Viper rom when this happened.
Click to expand...
Click to collapse
bb1981 said:
Settings and command prompt pics showing problem
Click to expand...
Click to collapse
Do you always run it in airplane mode?
?
I didn't even realize that when I took the pics but without putting it into airplane mode, it would sit at the htc logo indefinitely until a few minutes pass and it reboots only to get stuck in that cycle unless I jump in and power off. I did forget to mention the reboots after a few minutes in the OP also in case that changes what the issue could be. This was coming off the 4.4.3 RUU and I had the same issue with 4.4.4 and also Sinless 3.5.5(?). It worked great before and I'm just hoping it isn't hardware failure.
bb1981 said:
I didn't even realize that when I took the pics but without putting it into airplane mode, it would sit at the htc logo indefinitely until a few minutes pass and it reboots only to get stuck in that cycle unless I jump in and power off. I did forget to mention the reboots after a few minutes in the OP also in case that changes what the issue could be. This was coming off the 4.4.3 RUU and I had the same issue with 4.4.4 and also Sinless 3.5.5(?). It worked great before and I'm just hoping it isn't hardware failure.
Click to expand...
Click to collapse
Which method did you use for the RUU? Exe or sd?
Initially, I used the exe version but when it have the version number it was going to upgrade to, it was unreadable. Going back to 4.4.3, I flashed the firmware through fastboot then ran the ruu off the sd card. That's also why the sd card is ejected in the first pic so I could get past hboot to make sure it completely powers off.
bb1981 said:
Initially, I used the exe version but when it have the version number it was going to upgrade to, it was unreadable. Going back to 4.4.3, I flashed the firmware through fastboot then ran the ruu off the sd card. That's also why the sd card is ejected in the first pic so I could get past hboot to make sure it completely powers off.
Click to expand...
Click to collapse
Did you try a factory reset from stock recovery/hboot yet?
I'll try that next. I just tried it but it seems like I don't have a recovery installed. Instead of saying recovery booting, it just bootloops.
just tried flashing stock recovery and got stuck in a bootloop again. Running the exe again to try 4.4.4 and still get the same unreadable upgrade version. The version that it's coming from has been right all the time, but the version it's going to I'm guessing should be 3.xxxxx instead of like the screenshot attached.
bb1981 said:
just tried flashing stock recovery and got stuck in a bootloop again. Running the exe again to try 4.4.4 and still get the same unreadable upgrade version. The version that it's coming from has been right all the time, but the version it's going to I'm guessing should be 3.xxxxx instead of like the screenshot attached.
Click to expand...
Click to collapse
That's fine man. It's not an encrypted rom so it doesn't read the plain text file correctly. It will flash what it's supposed to.
dottat said:
That's fine man. It's not an encrypted rom so it doesn't read the plain text file correctly. It will flash what it's supposed to.
Click to expand...
Click to collapse
That's a relief to see that. After I ran it I wasn't sure because it gets stuck on the setup splash screen (thinking it was something not reading correctly on my end and even tried running a second time right away) and I can't get past it at all without airplane mode. I'll have to keep working on it later and see what happens. Thank you for the replies and help, especially with the RUU files and hopefully I can get it figured out. :fingers-crossed::highfive:
bb1981 said:
That's a relief to see that. After I ran it I wasn't sure because it gets stuck on the setup splash screen (thinking it was something not reading correctly on my end and even tried running a second time right away) and I can't get past it at all without airplane mode. I'll have to keep working on it later and see what happens. Thank you for the replies and help, especially with the RUU files and hopefully I can get it figured out. :fingers-crossed::highfive:
Click to expand...
Click to collapse
Did you try flashing the newest twrp 2.8.0.3 recovery ?
Fyi 4.4.4 roms can take up to 20 mins to get to the initial set up screen you might want to hang in there.
Roefastford said:
Did you try flashing the newest twrp 2.8.0.3 recovery ?
Click to expand...
Click to collapse
Twrp does work although I haven't tried it this time just to see if I could try a factory reset to maybe get back my lost baseband and IMEI.
smeejaytee said:
Fyi 4.4.4 roms can take up to 20 mins to get to the initial set up screen you might want to hang in there.
Click to expand...
Click to collapse
I wish I could. The phone once booted will reboot itself after a few minutes.
Oh ok sorry that didn't help.
smeejaytee said:
Oh ok sorry that didn't help.
Click to expand...
Click to collapse
I apologize if the last reply was short and possibly coming across snippy...I was at work and didn't have longer to reply...I think I may have made some very sight progress but the phone still knows nothing about itself once booted. I flashed twrp then wiped system, data, cache and dalvik then proceeded to flash unsense 6 and the 4.4.4 insecure kernel which is recommended by the developer for this rom. It booted fine and on the just a sec screen (right after the language selection on aosp/gpe), I did the four corner tap to bypass setup, enabled dev options, then had it connected to my laptop collecting a logcat for when it rebooted to see if it could show someone who knows far more about android than I do what could be causing trouble. The only problem this time is it never did. Almost like taking a car into the mechanic and somehow it knows and doesn't misbehave.... In fact, I feel asleep for a short time and when I woke up again, the command prompt never changed indicating that it ran the whole time without a reboot. At that time, I powered off and called it a night. Is it possible for a partition to become corrupted causing this?
bb1981 said:
I apologize if the last reply was short and possibly coming across snippy...I was at work and didn't have longer to reply...I think I may have made some very sight progress but the phone still knows nothing about itself once booted. I flashed twrp then wiped system, data, cache and dalvik then proceeded to flash unsense 6 and the 4.4.4 insecure kernel which is recommended by the developer for this rom. It booted fine and on the just a sec screen (right after the language selection on aosp/gpe), I did the four corner tap to bypass setup, enabled dev options, then had it connected to my laptop collecting a logcat for when it rebooted to see if it could show someone who knows far more about android than I do what could be causing trouble. The only problem this time is it never did. Almost like taking a car into the mechanic and somehow it knows and doesn't misbehave.... In fact, I feel asleep for a short time and when I woke up again, the command prompt never changed indicating that it ran the whole time without a reboot. At that time, I powered off and called it a night. Is it possible for a partition to become corrupted causing this?
Click to expand...
Click to collapse
Partitions can get corrupted but as far as I'm aware the only way to fix it is with soff I'm not positive because there is an option in twrp to repair partitions also you may be able to use that without soff.
_)(_(45466_!!$$%[¥|[]®]«¥°]<<° xda app...why do I not have permission to post? [/rant]
I picked up a replacement gunmetal gray m8 on swappa and am considering putting the red one up on the boneyard there to give someone a chance to poke around with it. I was wondering if a partition that twrp doesn't have in the repair section like the one for radio/modem for instance could get damaged. The RUU should take care off any problems like that though so I'm officially stumped and haven't really had any extra time to do any troubleshooting.
bb1981 said:
_)(_(45466_!!$$%[¥|[]®]«¥°]
Weird quotes too...the app doesn't like you lol. If you are replacing it can you send me the broken one so I can better try to support this device?
Edit...I know you probably will get pm requests for that too. I'm all about unbricking HTC phones and I'm sure there's enough people around here to back that up between my ruu support and all.
Click to expand...
Click to collapse
dottat said:
bb1981 said:
_)(_(45466_!!$$%[¥|[]®]«¥°]
Weird quotes too...the app doesn't like you lol. If you are replacing it can you send me the broken one so I can better try to support this device?
Edit...I know you probably will get pm requests for that too. I'm all about unbricking HTC phones and I'm sure there's enough people around here to back that up between my ruu support and all.
Click to expand...
Click to collapse
I finally got wise and did a copy and paste after something like 5 times saying I didn't have permission lol....that sounds like a great idea. More (and better) support and understanding is always good.
Click to expand...
Click to collapse

Defective ONnePlus 7 ? Help me out pls

Ok so i will try to go straight to the point.
I got OnePlus 7 that i bought from Aliexpress (8gb and 256gb) the thing is that im almost 90% sure this phone is defective.
You can use teh phone correctly for about 2 days then all of a sudden it will freeze completely and then you CANT do absolutely anything else, not even turn it off by holding power button ..
So i just left it there until it ran out of battery.
Then i charge while inside the fastboot and when i try to boot it is in a boot loop , doesnt even go into the boot animation
and to make things even more interesting i tried to wipe data guess what? The phone screen suddendly started blinking until again it ran out of battery. (you could see for a split of a second every time the screen blinks the progress bar of the wipe but it never moved from initial point).
So yea at this point is pretty obvious that something is wrong so i bought a Mi9T Pro meanwhile but i dont want this phone to go to waste.
Anyone out there has a clue of what could be? I wanna attempt to fix it myself if possible.
Aliexpress just gave a bit of the money back and the company Hongkong Goldway didnt give a f and they even go as far as to pretend they don't know what i'm saying ( the language barrier when it beneficial for them ).
This was gonna be a short explanation but i guess it was neccesary to be this long to explain correctly whats going on.
BTW: the only way yo make the phone work again for 2 days mayebe 3 is by using the MSM tool , any other method doesnt work.
also when it was working i filled the whole 256gb to kinda check the internal memory for corruption but it actually filled up without any problem so idk .
The problem isn't the phone, the problem is you. Clearly you stuffed the phone up yourself by trying to mod/root it and now you have ruined it further by flashing incorrect images to the device.
You shouldn't be coming to XDA when the fault is entirely on you, I've seen it all before.
@PriPhaze is your device stock(bootloader locked) or modified in any way?
aaycce said:
The problem isn't the phone, the problem is you. Clearly you stuffed the phone up yourself by trying to mod/root it and now you have ruined it further by flashing incorrect images to the device.
You shouldn't be coming to XDA when the fault is entirely on you, I've seen it all before.
Click to expand...
Click to collapse
Really? Lol it's that the best you could say? Trying to sound smart eh ? lmao
Clearly you don't know what you saying so you are not the person I'm looking for but "thanks" for such "helpful" respond.
strongst said:
@PriPhaze is your device stock(bootloader locked) or modified in any way?
Click to expand...
Click to collapse
Hi, the device is unlocked right now. I didn't install any other ROM other than OOS.
PriPhaze said:
Really? Lol it's that the best you could say? Trying to sound smart eh ? lmao
Clearly you don't know what you saying so you are not the person I'm looking for but "thanks" for such "helpful" respond.
Hi, the device is unlocked right now. I didn't install any other ROM other than OOS.
Click to expand...
Click to collapse
Thank you for the reply. Is the bootloader just unlocked or do you have installed anything like twrp, magisk or others?
Which version of OxygenOS do you have?
strongst said:
Thank you for the reply. Is the bootloader just unlocked or do you have installed anything like twrp, magisk or others?
Which version of OxygenOS do you have?
Click to expand...
Click to collapse
Thanks to you
Ahh yes twrp was installed but now it's inaccessible .
After the phone freezed I can no longer use twrp.
Also yes magisk was installed to restore my apps using swift backup.
OOS version is the last one available.
PriPhaze said:
Thanks to you
Ahh yes twrp was installed but now it's inaccessible .
After the phone freezed I can no longer use twrp.
Also yes magisk was installed to restore my apps using swift backup.
OOS version is the last one available.
Click to expand...
Click to collapse
It might be a good idea to use unbrick tool and clean flash the stock OxygenOS, recovery and remove root to see if it behaves better.
strongst said:
It might be a good idea to use unbrick tool and clean flash the stock OxygenOS, recovery and remove root to see if it behaves better.
Click to expand...
Click to collapse
I did, same behaivor ; in 2 days more less it will freeze and reboot and then system will be gone.
And so i need to use MSM tool again to get it back running. The only thing i have not tried is to use a custom ROM insetad of OOS
PriPhaze said:
I did, same behaivor ; in 2 days more less it will freeze and reboot and then system will be gone.
And so i need to use MSM tool again to get it back running. The only thing i have not tried is to use a custom ROM insetad of OOS
Click to expand...
Click to collapse
Maybe I did not understand correctly: Did you tried the stock rom without unlocking the bootloader and magisk? Or did you immediately unlock and install magisk immediately and then test?
The stock rom is stable and should work, otherwise a hardware issue can be the problem why you have those issues.
strongst said:
Maybe I did not understand correctly: Did you tried the stock rom without unlocking the bootloader and magisk? Or did you immediately unlock and install magisk immediately and then test?
The stock rom is stable and should work, otherwise a hardware issue can be the problem why you have those issues.
Click to expand...
Click to collapse
Yea tried with locked bootloader and then unlocked .
So yea maybe i wasn't clear enough but what i meant with the first post is that im 90% sure that here is a hardware issue but i dont really know what could be and there is not repair service in my country.
Thats why the only option i have left is to figure out what is wrong and change that part.
Iwas hoping someone could guide me to figure out which part i need to change.
PriPhaze said:
Yea tried with locked bootloader and then unlocked .
So yea maybe i wasn't clear enough but what i meant with the first post is that im 90% sure that here is a hardware issue but i dont really know what could be and there is not repair service in my country.
Thats why the only option i have left is to figure out what is wrong and change that part.
Iwas hoping someone could guide me to figure out which part i need to change.
Click to expand...
Click to collapse
Hmm, I can't tell you which part to exchange cause it can be the processor, flash for example which you cannot exchange. Battery might be an option, but that's not really the culprit imo...
strongst said:
Hmm, I can't tell you which part to exchange cause it can be the processor, flash for example which you cannot exchange. Battery might be an option, but that's not really the culprit imo...
Click to expand...
Click to collapse
Well in any case the cpu and internal memory are in the same board no? so that probably means i would need to change the whole board wich is 250US
PriPhaze said:
Well in any case the cpu and internal memory are in the same board no? so that probably means i would need to change the whole board wich is 250US
Click to expand...
Click to collapse
Yes, everything is on board. It's the worst case for, sadly...
Or you buy a device with broken screen and exchange the board /display. Depends how much you have to spent for this at all.
PriPhaze said:
Ok so i will try to go straight to the point.
I got OnePlus 7 that i bought from Aliexpress (8gb and 256gb) the thing is that im almost 90% sure this phone is defective.
You can use teh phone correctly for about 2 days then all of a sudden it will freeze completely and then you CANT do absolutely anything else, not even turn it off by holding power button ..
So i just left it there until it ran out of battery.
Then i charge while inside the fastboot and when i try to boot it is in a boot loop , doesnt even go into the boot animation
and to make things even more interesting i tried to wipe data guess what? The phone screen suddendly started blinking until again it ran out of battery. (you could see for a split of a second every time the screen blinks the progress bar of the wipe but it never moved from initial point).
So yea at this point is pretty obvious that something is wrong so i bought a Mi9T Pro meanwhile but i dont want this phone to go to waste.
Anyone out there has a clue of what could be? I wanna attempt to fix it myself if possible.
Aliexpress just gave a bit of the money back and the company Hongkong Goldway didnt give a f and they even go as far as to pretend they don't know what i'm saying ( the language barrier when it beneficial for them ).
This was gonna be a short explanation but i guess it was neccesary to be this long to explain correctly whats going on.
BTW: the only way yo make the phone work again for 2 days mayebe 3 is by using the MSM tool , any other method doesnt work.
also when it was working i filled the whole 256gb to kinda check the internal memory for corruption but it actually filled up without any problem so idk .
Click to expand...
Click to collapse
Ah yes, the common misconception that power shuts it off. Nope, not this phone. You have to hold power and volume up together to power off the phone when it crashes. Make sure you're using the latest platform tools (adb/fasboot) to unlock your phone. Make sure oem unlocking is enabled in developer settings after you've unlocked, having it disabled for some reason does screwy things. Mine was disabled once when I downgraded to Android 9 using the all in one tool available on xda, I thought I bricked the phone because it wouldn't boot after a reboot. Flash the latest oos twice through the system local upgrade feature, this will put the current oos on all partitions. Use the correct twrp, the unified versions found on xda 3.3.1-75 and 3.3.1-76 work well for me. The installer zip for those can be used in magisk to flash twrp after an OTA update before reboot. So, local upgrade 100% -> magisk modules "+" twrp 3.3.1-75 unified installer zip -> reboot to recovery -> flash magisk 20.3 at least (20.4 is available now). Do this twice so that everything is the same version on all the partitions. Lastly restore apps with swift backup without data, I know it's not ideal but may be necessary because some app's data may be corrupt and causing this. Good luck. Of course at any time you have it running you can reboot in safe mode (touch and hold restart until the dialogue pops up) and see how long you can use it without any third party apps to confirm that it is an app you installed.
Man I had the exact same problem as you and I got it fixed this morning after nights of fastboot commands trial and error found this thread forum.xda-developers.com/oneplus-7/how-to/rom-stock-fastboot-roms-oneplus-7-t3937478
Tried a few times before it worked but saved my phone all I had was fastboot mode and no recovery make sure to manually flash all fastboot commands you will then get stock recovery back wipe using all 3 options go 1st 2nd 3rd and then 1st wipe again after reboot phone might hang just force reboot and fixed
I really appreciate all the replies really but hmm im guessing there's a misunderstanding on what im saying.
I do know how to flash and recover one plus devices using MSM tool if neccesary, also to flash the fastboot rom .
The thing here is that everytime i recover the phone and all seems stable and working good , after a2 days more less it will random freeze of death and you cant even reboot holding power button NOTHING! is completely freezed.
So yea, thats pretty much it, i have tried already all that you said so far :c.

Need some help, booting to black screen

So i restored my phone. Via MSM. Updated. To lastest 11.0.9.9 international.
Unlock bootloader. Installed twrp. Restored data only, clear cache l. And phone will only boot to blank screen. I can access adb so is booted, but won't show lock screen or anything. Get power menu when i hold the power button. Can reboot to recovery fine. Any ideas what's going on?
Oh and trying to boot the other partition b gets me to Qualcomm dump. Just get back yo recovery and switch back to a and back to black screen.
nujackk said:
So i restored my phone. Via MSM. Updated. To lastest 11.0.9.9 international.
Unlock bootloader. Installed twrp. Restored data only, clear cache l. And phone will only boot to blank screen. I can access adb so is booted, but won't show lock screen or anything. Get power menu when i hold the power button. Can reboot to recovery fine. Any ideas what's going on?
Oh and trying to boot the other partition b gets me to Qualcomm dump. Just get back yo recovery and switch back to a and back to black screen.
Click to expand...
Click to collapse
Did you follow the instructions in https://forum.xda-developers.com/t/...covery-project-8t-kebab.4302449/post-85292199 ?
In particular, had you removed password before you took the backup?
BillGoss said:
Did you follow the instructions in https://forum.xda-developers.com/t/...covery-project-8t-kebab.4302449/post-85292199 ?
In particular, had you removed password before you took the backup?
Click to expand...
Click to collapse
Funny how i minds block things. Never saw the notes. It looked like what i have been doing in the past.
So haw many is a few restarts? How many is too many and time to give up?
And now that i think about it can't be sure if i removed my pin. (Did the backup few days ago and my memory bis crap lately )
nujackk said:
Funny how i minds block things. Never saw the notes. It looked like what i have been doing in the past.
So haw many is a few restarts? How many is too many and time to give up?
And now that i think about it can't be sure if i removed my pin. (Did the backup few days ago and my memory bis crap lately )
Click to expand...
Click to collapse
If it's going to work, I've never needed more than 3.
BillGoss said:
If it's going to work, I've never needed more than 3.
Click to expand...
Click to collapse
Ok.. I'm on 6 at this point. Think I'll just give up and start from scratch. Think maybe i did forgot to remove the pin before backing up. But it seems like it's accessing files. Has my custom bootscreen.
nujackk said:
Ok.. I'm on 6 at this point. Think I'll just give up and start from scratch. Think maybe i did forgot to remove the pin before backing up. But it seems like it's accessing files. Has my custom bootscreen.
Click to expand...
Click to collapse
That's why that post is there: backup and restore of data is not straightforward on this device.
BillGoss said:
That's why that post is there: backup and restore of data is not straightforward on this device.
Click to expand...
Click to collapse
Yeah unfortunate it keeps getting harder to get want we want from our devices.
I agree. Seamless updates is great ... provided you never change things.
Appreciate your help Bill. I've found several of you other post to be helpful as well.

Categories

Resources