A few months ago, I had my Honor 8 "repaired" due to a broken USB-C port cussed by my GF falling asleep with it in her hand.
After performing a factory reset on the phone, it somehow removed all Huawei useful configuration based software as well as any side apps preloaded on the phone when new.
Trying to use the phone from a fresh factory reset, the phone is missing the provisioning message it uses to query the setup info from the phone service provider, the keyboard so all setup had to be done with voice, all Huawei apps, including apps to check phone health, Huawei ID information and it won't allow the phone to be updated at all.
BTW, after the factory reset, the OS had absolutely none of the previous updates that were installed before.
When the phone was "repaired", the place that worked on it decided to just replace the board the USB connector was on instead of what I had asked, which was for them to replace just the USB connector. According to them, it was just easier to replace the board.
The next day after I got my phone back and realized this problem, the company, which had been there for years, had shut down. Doors were closed, lights were off, and a sign in the window stating they were closed for business.
Basically, I just need to know if this is a problem that can be fixed with a firmware flash, or is this thing now just a pretty glass paperweight? If it can be fixed, can someone provide me with a link to where to find the firmware for the model FRD-L14? I had checked the Huawei site and they only have firmware for the L04 model, and the Russian firmware finder site seems to have broken links to all relevant firmware files for my phone.
Any help is appreciated.
Related
So after performing a factory reset on the device it booted normally the 1st time and asked me for my PIN (??). It accepted my usual PIN (!) and took me to a clean slate (all Play Store apps gone) BUT the wallpaper was still the same, my username was still there and the other user profile was also still there. What was missing was a keyboard so there was nothing I could do with the device.
OK no problem, lets perform another factory reset. So once again I hold volume up & the power button, select reset to factory settings, reboot... and this time it boots to a black screen with only the android navigation bar at the bottom and the words emergency mode on the bottom left.
Any ideas on what to do now, short of sending it back to the store?
This is a brand new unit, running EMUI 5 from the box, bought from an authorised dealer. It was not rooted or tampered with in any way or form.
I've seen those symptoms and I had to perform an erecovery. If you have the Chinese version you can do that if you have the international version I think erecovery isn't working just yet.
Sent from my MHA-L29 using XDA-Developers mobile app
I have a MHA-L29 bought in Europe. I assume erecovery is the mode enabled by pushing volume up, volume down & power button at the same time? At that point I would need the full OS in a microSD inside the device, correct? Apologies, I'm not well versed in Android...
Huawei's website offers very little help . All one can find is a link to the 'quick start manual', a link to EMUI's source code (Mate 9 is absent), a mobile wifi inspection tool, and HiSuite. I'm assuming HiSuite is of no help in this case?
Have I run out of options here? Is my next step returning the device to the shop?
Governa said:
I have a MHA-L29 bought in Europe. I assume erecovery is the mode enabled by pushing volume up, volume down & power button at the same time? At that point I would need the full OS in a microSD inside the device, correct? Apologies, I'm not well versed in Android...
Huawei's website offers very little help . All one can find is a link to the 'quick start manual', a link to EMUI's source code (Mate 9 is absent), a mobile wifi inspection tool, and HiSuite. I'm assuming HiSuite is of no help in this case?
Have I run out of options here? Is my next step returning the device to the shop?
Click to expand...
Click to collapse
The easiest choice for you is returning the device to the shop, but it can definitely be fixed.
Huawei made some very stupid decisions with the Mate 9. You cannot flash firmware from SD card anymore. You have to use eRecovery (boot the phone plugged into a computer holding the volume up key) to recover. However, this eRecovery has not launched for the european model, so you can't restore.
I might be able to help you using my DNS server because I have reverse-engineered a lot of how the Mate 9 works, but I don't have a European model to test with. If it's easy for you to return it to the store, that's probably the best option.
I've contact Huawei support and they'll be picking up the device by courier. They expect to have it returned in 5 days max. I did test the eRecovery mode that you've described and indeed it fails to gather the needed files ("Getting package info failed").
I appreciate you input, what would your method involve? I've seen firmware (B122) floating around the web, how are people flashing it if the SD card method isn't working for this unit? Having said that I wouldn't personally attempt anything that could possibly void the warranty.
Governa said:
So after performing a factory reset on the device it booted normally the 1st time and asked me for my PIN (??). It accepted my usual PIN (!) and took me to a clean slate (all Play Store apps gone) BUT the wallpaper was still the same, my username was still there and the other user profile was also still there. What was missing was a keyboard so there was nothing I could do with the device.
OK no problem, lets perform another factory reset. So once again I hold volume up & the power button, select reset to factory settings, reboot... and this time it boots to a black screen with only the android navigation bar at the bottom and the words emergency mode on the bottom left.
Any ideas on what to do now, short of sending it back to the store?
This is a brand new unit, running EMUI 5 from the box, bought from an authorised dealer. It was not rooted or tampered with in any way or form.
Click to expand...
Click to collapse
when you make a factory reset in recovery on first boot you see lost the google service and also the keyboard (i know well i have done it two time in 4 days cause bootloop) how got the google service back? simply download from apkmirror a google keyboard (you need it for next step) and install it then go to settings/advanced settings and make a factory reset(need a pin in my case that why have installed a keyboard) when the device boot again you have the google service again
I see, thank you. I'll keep that in mind next time I reset the device. :good:
I then ask, if I do reset the device to factory settings and it craps out again, how would one know if eRecovery is able to recover European models? As of 3 days ago this option would throw a 'Getting package info failed' error. Short of trying it myself when I get my device back, has anything changed in the meanwhile? Is eRecovery working now?
hi mate, I only know what I've tried: eRecovery delete google service, eRecovery not erase password.factory reset from settings does reappear google services .... likely these problems are software bugs or are linked to nougat that has different partitions than to the past....sorry for now thats it
Inviato dal mio MHA-L29 utilizzando Tapatalk
So I just got my phone back from the service center and the first impressions were not good. Before returning the phone they called me to ask for my Google username and password (!!) to make sure the device was successfully recovered. I obviously refused and just told them to kindly return the device and I would test it myself.
Well the package arrived today and is missing the SIM ejector and the IMEI back sticker. Not only that but it now refuses to install the Amazon Shopping app and Google PhotoScan app because "this app is incompatible with your device". How can this be if I had these two apps installed before??
I also noticed that the device claims to be an "Orange MHA-L29"... have these guys just flashed it with a firmware meant for Mate 9s sold through Orange?
Governa said:
So I just got my phone back from the service center and the first impressions were not good. Before returning the phone they called me to ask for my Google username and password (!!) to make sure the device was successfully recovered. I obviously refused and just told them to kindly return the device and I would test it myself.
Well the package arrived today and is missing the SIM ejector and the IMEI back sticker. Not only that but it now refuses to install the Amazon Shopping app and Google PhotoScan app because "this app is incompatible with your device". How can this be if I had these two apps installed before??
I also noticed that the device claims to be an "Orange MHA-L29"... have these guys just flashed it with a firmware meant for Mate 9s sold through Orange?
Click to expand...
Click to collapse
mmmm too bad mate,your M9 is no brand? Orange is a carrier ....my opinion is ask why this change and ask for phone replacement
Yep, unbranded bought from an authorised dealer.
I am now going to escalate it and try to have this unit rejected and exchanged for a brand new one. I sure hope they don't propose replacing it with a refurbished unit, after all we're talking about a €700 device here and it has spent more time in the service center than in my hands. Very frustrating.
And this whole "no way to use eRecovery yet" and "no way to flash it from MicroSD" is just the last nail in the coffin... I mean what were they thinking? Even Apple devices allow me pick up the corresponding firmware and flash it at home from day 0. I hear the P9 Plus is less restrictive, maybe I should have gone for one of those instead?
I've got a real lemon here... let's see how they handle my case, I'll keep you all updated.
I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?
I had the same problem and from my understanding all the methods are blocked now I'm trying to find out if theres a way that i just havent figured out yet i've book marked your question and will keep checking back to see if you have had any help
I know it is a tricky subject as I could be in possession of a stolen phone in which case I am rightly being locked out of it but I have the receipt to prove I have purchased it which I am willing to show to anybody who might know a way around it.
Have you tried putting it in download mode then using emergency recovery on Smart Switch?
Yes tried that earlier. Smart Switch doesn't recognise it. Just stays on the screen telling me to connect the phone even though I already have. When I plug the phone into the laptop it says the USB device (my phone) has malfunctioned and Windows doesn't recognise it. I have tried ODIN and that doesn't recognise the phone either as it isn't being given a COM number by Windows. Guess I will have to take it back to the Samsung Support Centre as I paid them to get the phone working and he said the price quoted was to get it fully working. If the USB isn't working then they can repair it!
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Ditto as him
Proof of ownership, otherwise identical to dec update. whatever you think, need the help..thanks
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse
I've just unlocked a S5 Neo.
I flashed the very first firmware version (5.1.1)
FRP lock still there BUT I could now use the side sync hack or samsung unlock APK on OTG cable.
Then flashed the latest 6.0.1 version
Did you manage to unlock it?
I have the same problem
Any good current methods for this
uninstall all drivers related and kies. Then install kies and needed drivers. See if you can connect via download mode now.
godders3906 said:
I purchased a Samsung Galaxy S7 Edge from a guy off ebay with smashed the screen for a cheap price and recently took it to my local Official Samsung repair shop who repaired it for a reasonable price. I turned the phone on and it had all of the other guys personal stuff on the phone and he had a screen lock on there that I didn't know how to unlock so I did a factory reset in recovery without realising about FRP. When the phone rebooted I get the google screen asking me for the original google account credentials. I have tried contacting him and getting no joy. I have tried all of the methods in youtube but as the phone has the December 2016 security update none of them seem to work. When I plug the phone into my PC windows just says the USB device has malfunctioned and does not connect. I have installed the full Samsung USB drivers but the PC still doesn't recognise it. Could the fact it is not recognised be due to the google frp or could it be to do with the fact the phone could still be damaged from when it was dropped. Im not fussed about the USB port in normal use but it appears the only method to bypass the FRP is via the USB and using one of those methods. Can anyone help please?
Click to expand...
Click to collapse
Try this OP.
I Found A Way To Remove FRP that dosen't trip any trips
thundastruck said:
Try this OP.
Click to expand...
Click to collapse
Have a look at my post here... How To Reset FRP (Nearly All Fones From Android 6.x.x to 7.x.x, No Trips, Flash counter inciment, Knox, Still Mode = Official, Warenty 0 (0x0000) (Still working 16 June 2017)
You see, im not all that good with programming APK files, Dalvik VM, Obex,ect, but Linux I'm your man so i figured where is the email/pass info held and is there a switch to keep it on off, ends up one of the easiest hacks i've ever done, no complicates hashed/salted double coded switch, or hard wired switch,
just a very small partition that when or if you have any google account info stored in it you get locked out till you enter the exact same info, so i just dd,d the partition after taking a backup of course lol (; then when the fone booted to download mode i noted FRP=OFF so i flashed the stock bootloader to let the fone boot all the way to video mode and YES!!! it thought it was a new fone never been used before then i check the switches/trips KNOX , device status = official, to test i just made a new google account on the spot on the phone filled all the [email protected] in then voila its working, calls, all menu items ok, official all knox fine, just the way it was when i first got it, except obviously I've upgraded to v7, hopefully this works for you, please dont use or talk about illegall activity with this, or using it for profit, it's agift I gave you's for free so i want it to stay that way, all i want is a thanks, and a beer, lol, no but seriously, when the guy that invented the hammer to ease the effort of pussing nails into wood with you hands, never got hassle about murders with them, tha fact the could be used to rob banks, rob people, damage things, smash up shops, etc so... think about it, all i done was make a tool to help people too. theres litteraly millions of exploits, including android based ones out there just now check, https://www.exploit-db.com/ , OWASP_Vulnerable_Web_Applications_Directory_Project , http://www.exploit-db.com/ , http://www.blackploit.com/ , packetstorm cve etc etc. #
This is a tool to help people how when they first got there fone, and just filled in any old stuff to get into the fun part of the fone. ie "you cannot use [email protected],com as it already in use how about [email protected],com then the password, use one lower case, one higher case, one number , one symbol, more than 12 letters but less than 20, don't use anything you talk about, your name dob etc etc etc , so most people just pick the random one google pumps out and tries random passwords till one goes through, "I've seen this done a few times with my own eyes and had to stop them and explain and this was b4 FRP" Also if you change one letter in your google password, Factory reset your fone, your locked out if the fone never got the change in time, try it, Anyways if people use this for illegal purposes its there evilness there using not mine, there just using my tool as well as the thousand of others in the arsonry, even the OS check out "kali linux OS", "Parrot OS" "Blackbuntu OS"," BlackArch Linux" Also say you code a program to check hashes at a faster rate to speed up logins etc, a hacker will use it to check stolen passwd lists faster, if a faster CPU is made, the first thing a hacker thinks of is how many words/letters it can do a second so they can bruteforce the wifi key of the local bank, hospital etc.... so?
tried EVERYTHING ....
I have the USCellular G935R4 .... S#iiiit , like I've even gotten to the actual HOMESCREEN , but no matter what I do it wont do it.. i can access just about any app and the settings accurately every single time within seconds-mins, even tried flashing it, even had FULL access and control over it using sidesync, and i tried rooting it from oneclickroot on pc but thennnn knox trips and won't let me enable developer options.... And got the error with "sign in using email and password" on quick shortcut maker , PLUS tried everything to fix the error by reinstalling google account manager , etc ...
But NOTHING ...
If ANYONE has any idea how to successfully do get into it , Pplleasee let me know!
???
Seriously ,
I swear , I'll even pay someone ...
Try flashing the phone to the latest MM via odin and try bypassing. I tried it on my G** da** S6 with may 2017 patch. Dowgraded into latest MM and tried different bypass and it worked.
any help in 2020
ash 202 said:
Hey need help? Contact me on WhatsApp @ +918848180955 I'll help u out
Click to expand...
Click to collapse
cany help in 2020 S7 Att frp removal PLEASE
Hi all, after being screwed over by The Android Doctor, a remote network unlocking site (they messed with my IMEI leaving me unable to make/receive calls/texts or use mobile data), and pulling my hair out, trying how to get round their malicious behaviour without having to spend out more money, I stunbled across another thread on this web site with one out of many solutions. (This may well be the most full proof though). The original post referred to a Galaxy S3 and was posted by Nev of Innsbruck, Austria on 4 November 2015.
Well my problem referred to a Galaxy S5, but as Nev rightly said if you download and fire up Samsung Kies, head for tools and select firmware upgrade and initialisation before connecting your phone, Kies will ask for your model number and serial number and then download all the various files it needs to reset your phone to original factory conditions but with the latest firmware for that particular model/serial number. From there on it's just a question of following the on-screen prompts, and stand back in amazement when normality is restored once again. Initially I thought this would undo the network unlock I paid for, but nope my phone is still unlocked, but fully usuable once again. This will obviously not work for a black listed IMEI phone. I have started this new thread in the hope of getting this answer out there, as finding a actual solution that worked, was like looking for a needle in a hay stack...
Hello,
I wanted to share what I had to do in order to fix my phone after it took the July 27 OTA update. The update somehow corrupted my display and the white portions of the display were now pink and red. A google search has info and pics on this display problem so I won't elaborate on it. The first thing I tried was power cycling the phone, the red and pink remained. The next thing I tried was factory reset the device, that didn't work either. I simply wanted to revert back to the previous firmware and hopefully that would fix it. I liked the new firmware features, but that pink screen had to go! I foolishly flashed the US unlocked firmware (XAA) from SamMobile site with Odin. The pink screen probem was fixed but this definately was not the firmware that came on this phone. Gear VR didn't work, Samsung pay was borked, and there were all types of problems with the software.
At this point I called Samsung Tech Support. The guy was really nice and after a bit of explaining he offered to have the phone flashed at no cost to me. However I would have to send the phone in to be repaired and I would be without my device for a week at least, maybe 2 weeks. I thanked him and hung up. Why couldn't he simply make the firmware available to me so I could fix this without having to send it in and be without my phone for over a week. Not really a acceptable solution. I went online and did some reading. That's when I found the fix!
To anyone who is having problems and would simply like to get back to original factory firmware Samsung has a program called " Smart Switch ". It's available as a App for your phone or as a PC software program. The phone app helps sync devices, but the PC program can do much more. I'm not going to go over in detail how to use the software because a google search has videos and tutorials on how to use it. For me I was able to enter my phone model and serial number and Smart Switch went and downloaded the "correct factory firmware" and installed it to my phone. Now I have the latest firmware (7/27) full factory install and the pink / red display problem is gone. So what I'm getting at is if you are having problems after taking the OTA update like I did, you can try using Smart Switch and install the complete factory firmware from scratch to your device. Make sure to follow instruction on how to use the program, I had to put the phone into download mode for it to work for me. Also be sure you understand about "Google lock" before flashing your phone. This program claims it can un-brick a Samsung phone, and will also over-write a rooted phone to get it back to stock. I'm sure Smart Switch has been discussed before, but for a new Samsung user (like myself) it sure got me out of a bind!
Hello everyone. I’ve got a hizpo stereo that a friend of mine give me a few weeks back. The numbers on the side of the radio is ADY17009. It’s running Android 7.1.2. The problem I’m having with it is the screen is inverted. I’ve tried the reset button tried erasing everything no luck. I tried accessing developer mode pressing build number 7 times and it didn’t let me access it. Anyone know where I can get a copy of the stock firmware and operating system on this thing or can I upgrade it to the latest and hopefully it will fix the issue. I can’t sign up on hizpo website. Every time I try to I get a connection timed out error. I had posted in the general forum so please delete that. That’s what I get for not reading lol.
robert6983 said:
Hello everyone. I’ve got a hizpo stereo that a friend of mine give me a few weeks back. The numbers on the side of the radio is ADY17009. It’s running Android 7.1.2. The problem I’m having with it is the screen is inverted. I’ve tried the reset button tried erasing everything no luck. I tried accessing developer mode pressing build number 7 times and it didn’t let me access it. Anyone know where I can get a copy of the stock firmware and operating system on this thing or can I upgrade it to the latest and hopefully it will fix the issue. I can’t sign up on hizpo website. Every time I try to I get a connection timed out error. I had posted in the general forum so please delete that. That’s what I get for not reading lol.
Click to expand...
Click to collapse
This is usually a symptom of a loose connection in the hardware(believe it or not, a good shake, tap or bump this way or that way has been known to solve this) or a symptom of the sensor needing to be recalibrated(also solved by shaking/bumping or even lightly dropping on a soft surface from about 12 inches, but doing it while the device is powered off)
Or, if the device still functions correctly, there are apps that can recalibrate the sensors for you.
As for finding the stock firmware...
If a Google search for:
"Return to stock (your model number)"
Is not finding anything, then it probably isn't available. These cheap, off brand devices usually do not get any software support of any kind from the manufacturers, they do not release the stock source or the stock firmware to the public.
If it came down to really needing to flash the device, you'd have to look for a firmware from a device that uses the exact same hardware as the device you own. That can be very difficult, it requires opening the device to look at the numbers on the hardware components, then using those to compare to other devices. If one of those devices is the same as yours and has a firmware available, you can use it.
Sent from my LGL84VL using Tapatalk