Sprint Edge with stock lollipop. I tried to root using odin, not sure what happened. Im an idiot, Im leaving for work in 3 hours i cant get my phone going again. When i try and use Kies it asks for a code which i dont have. Can someone give me the correct CF-Auto-Root file??? PLZ help im lost in a sea of information!
Do one thing flash twrp recovery and then u will be able to boot normally..for rooting install su.zip using twrp recovery
Do you have the stock firmware? Get it and Odin to get you going again.
can anyone help me downgrade my note edge n915p from lollipop to kitkat, i tried flashing thru odin but it failed showing error, i want to unlock downgrading the firmware to kitkat...
so it looks like the only place i can find the stock firmware is SAMMOBILE?
Ok i got it! I flashed recovery as advised
All good?
I flashed 5.1.1 using via odin 3.10 (no errors etc.) now my phone stuck at Powered by Android screen. I tried to reflash the firmware many times but still the same thing.
Before flashing 5.1.1 my phone was running Looper firmware. I did modify the build.prop (ro.securitystorage = false). Does this cause the issue?
When i get into recovery mode i see this yellow text
"dm-verity verification failed...
Need to check DRK first..."
Please help me to revive this phone. Thank you
I think the 5.1.1 update is just for T Mobile SM-G920T. Try flashing 5.0.2 for 920F if your device is international.
i posted it in a wrong forum. My phone is SM-G920T
Are you flashing the whole firmware/modem/bootloader and all the other things from the official tar file or using a modified tar file in order to be able to downgrade?
have to tried to flash back to stock 5.0.2???
aloric said:
I flashed 5.1.1 using via odin 3.10 (no errors etc.) now my phone stuck at Powered by Android screen. I tried to reflash the firmware many times but still the same thing.
Before flashing 5.1.1 my phone was running Looper firmware. I did modify the build.prop (ro.securitystorage = false). Does this cause the issue?
When i get into recovery mode i see this yellow text
"dm-verity verification failed...
Need to check DRK first..."
Please help me to revive this phone. Thank you
Click to expand...
Click to collapse
brother I have the same problem with a G925T as I found some solution for that and I tried to go down to 5.0.2 but I get error odin
Try to flash with s6 unikernel v2 003 for 5.1.1 only. That worked for me on mine. Link here. http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
same problem but in a s6edge SM-G925T, any solutions?
george1796 said:
same problem but in a s6edge SM-G925T, any solutions?
Click to expand...
Click to collapse
flash bl and ap only phones will boot
Help Please
atinder said:
flash bl and ap only phones will boot
Click to expand...
Click to collapse
Hey there. My devices (G920A) was showing IMEI null and Baseband Unknown. It was already G920AUCU3BOI2. I flashed it using this firmware => http://forum.xda-developers.com/att-galaxy-s6/general/stock-odin-tar-files-g920aucu3boi2-t3213306 (Which is the same Firmware as the previous I believe.) Odin had no errors, and the phone rebooted. But it couldnt pass the Samsung logo (waited for 20 min, nothing) Factory reseted it with no luck. Flashed only BL and AP with odin - still no luck. How can I solve this PITA problem? Thank u in advance.
atinder said:
flash bl and ap only phones will boot
Click to expand...
Click to collapse
ok silly question how do I get the AP and BL files for my phone?
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
now the problem is that the bootloader is another version from the rom, i cannot see any version of modem, the imei and the product code are blank... i checked them with the phone info app.. now i am downloading the rom with the baseband that shows me the phone info that i have... i also noticed that if i flash a rom which is one file or a rom that is full (bootloader,ap,modem,csc) i am getting error at cm.bin which is on bootloader.. that's why i can install a full rom but without the bootloader file...
Anyone????
i am always getting error at the cm.bin on odin...
i solved my problem by flashing the full stock rom according to the bootloader which was stucked in my phone
domigr said:
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
Click to expand...
Click to collapse
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
TimeOFTimeless said:
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
Click to expand...
Click to collapse
I have the same problem
Everyone can help us ?
when i'm flash with odin "sw rev check fail device 4 binary 3" smart swich software also not supported my device. plzzz help me.......
my problme is solved
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
"IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
mustafa_thora said:
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
I cannot boot into recover after this and it's stuck at the s6 logo
help
can someone help me i have galaxy s6 (sm-g920f) i want to back to stock and i just tried tried to install stock firmware 6.0.1 via odin with and without pit and i get this error sw rew check device 4 binary 3 but after i reboot it i have a message an error as occured while updating the device software can someone help me please
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
smartsecure said:
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
Click to expand...
Click to collapse
HOW DID YOU FLASH IT CAN YOU PLEASE ELABORATE. I have G920P running 6.0.1 and having the same issue while flashing 5.1.1
Cannot downgrade from 6.0.1 to 5.1.1.
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
You can't downgrade the bootloader version. And since the bootloader it's changed at almost every update, you will only be able to install the latest software version for your country.
If all fails, try emergency software recovery from SmartSwitch
palogada said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
Click to expand...
Click to collapse
Hi you listed a number of files there, where did you get them as they are not available on the search on these forums, I have the same problem and have managed to get this far from The Binary 1 error so making progress, I now just want to flash the lot so could do with some help on where the the files are.
I used the XEF OCT G920FXXS4DPJ2 Modem+Bootloader which i found on here which has given me a working ish Android phone, the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Thanks in advance for your help
cardigan101 said:
the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=60411933&postcount=5
check your odin mode bro
DroidTim said:
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
Click to expand...
Click to collapse
i think your phone is p series and you flash wrong rom.pls check odin mode.almost of f series is modified.
I flashed my stock firmware and my phones telling me to install DRK i would like to know how to do this my phone model is the Canadian variant(G920W8)
And the firmware version was for marshmellow
bro, do you flashed latest 6.0.1 if not try flashed latest version and after that make factory reset and wipe cash. also if flashed 1 file firmware not work with you so you have to flash 4 file firmware of your device.. you can use samfirm tprograme to find your 4 file firmware. and every thing will be fine
Hello guys..
I AM IN DESPERATE NEED OF YOUR HELP!!!!
Recently i treid to root my device original build number was XXU5ATI1 which was a failure... as the files which I flashed from a youtube video led to odin failure and bootloop.
Also when I tried to flash the Indian Stock rom files from SW website.. I was getting a Write Write partition error in odin.
Then my phone ended up in system binary..
However I managed to download the software with build number XXU5CUH2 which is from ireland.
I TREID TO flash TWRP as well but i was gettinga message saying "only system binaries are allowed to add recovery" or something like that.
Now My problem is
Phone is Glitchy as hell
Cant use VOLTE and I desperately need it with Jio sim
PLEASE redirect me to Samsung A750FNXXU5ATI1 build number stock file.. or help me to get VOLTE Back
PS_ I dont have TWRP installed.
Attached is my current stock version information...