Hi everyone my story goes like this...
im currently on axism rom which is lollipop 5.0.2 and i wanted to go to 'xtrestolite deo-dexed rom' which is lollipop 5.1.1 and noticed i needed to flash bootloader and modem for 5.1.1 so i did this using odin and now it will not boot i now realise that it says this will not work with a stock kernel which im geussing the axism rom has so how do i get myself out of this mess any help asap would be greatly appreciated
JamieBlues said:
Hi everyone my story goes like this...
im currently on axism rom which is lollipop 5.0.2 and i wanted to go to 'xtrestolite deo-dexed rom' which is lollipop 5.1.1 and noticed i needed to flash bootloader and modem for 5.1.1 so i did this using odin and now it will not boot i now realise that it says this will not work with a stock kernel which im geussing the axism rom has so how do i get myself out of this mess any help asap would be greatly appreciated
Click to expand...
Click to collapse
Have you tried just flashing the stock ROM? May not be axism but could at least get you out of the situation for now
im just hunting for a stock rom now that i can flash using odin
also do i just load the stock rom i download through the 'AP' button in odin
JamieBlues said:
im just hunting for a stock rom now that i can flash using odin
also do i just load the stock rom i download through the 'AP' button in odin
Click to expand...
Click to collapse
Yup, thats it I got my ROM from here when my phone wouldn't boot >> http://forum.youmobile.org/downloads/?cat=42
Thanks! im downloading one from sam mobile so i will let you know how it goes in an hour
and when i unzip the download will i get a .tar file from it?
JamieBlues said:
Thanks! im downloading one from sam mobile so i will let you know how it goes in an hour
and when i unzip the download will i get a .tar file from it?
Click to expand...
Click to collapse
Yup either a .tar or .md5 as far as I remember, then just mount on AP and hit start
i extracted it to get the md5 file but it has failed in odin i dont know what to do now someone help please
Right im stuck now so heres exactly what i have done
i was on a 5.0.2 custom rom and wanted to go to a 5.1.1 rom (xtrestolite) so i went and flashed the bootloader and modem for 5.1.1 and it was just stuck on the first boot screen i then noticed it said somewhere that this will happen if i had a stock kernel i have tried to flash stock 5.0.2 firmware through odin but it fails so im asking if im doing anything wrong or what to try next
thanks alot in advance, Jay
JamieBlues said:
Right im stuck now so heres exactly what i have done
i was on a 5.0.2 custom rom and wanted to go to a 5.1.1 rom (xtrestolite) so i went and flashed the bootloader and modem for 5.1.1 and it was just stuck on the first boot screen i then noticed it said somewhere that this will happen if i had a stock kernel i have tried to flash stock 5.0.2 firmware through odin but it fails so im asking if im doing anything wrong or what to try next
thanks alot in advance, Jay
Click to expand...
Click to collapse
The stock rom that you tried to flash just previously there, was that 5.0.2 or 5.1.1?
I got the Galaxy S6 yesterday and coming from Nexus 5, I wanted to remove the existing bloatware by flashing the XtrestoLite Deodexed ROM. This one here: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/rom-xtrestolite-deodexed-mod-edition-1-3-t3119968
I'm haven't had much experience in rooting and it's my first time flashing a custom ROM. The phone was running on Android 5.1.1.
Apparently I failed. I started with CF-Root but I wasn't sure if it was done correctly. This was followed by TWRP 2.8.7.1 . Then I tried booting up the phone and the boot logo just loops. I tried to wipe the cache as well as the Delvik-cache through TWRP but it's still the same. Then I tried to flash the stock ROM that I found online but I got the error "Nand Write Start" followed by "Fail". I seem to have tried everything and now I just want to get the phone to work again. It shouldn't be so hard.
Someone help me please :crying:
Have you tried to flash the stock rom via Smart Switch software? There's an option in the top of the window where it says "More" called Emergency Recovery. When my S6 bricked nothing but that did the trick, you should give it a try.
Gallitho said:
Have you tried to flash the stock rom via Smart Switch software? There's an option in the top of the window where it says "More" called Emergency Recovery. When my S6 bricked nothing but that did the trick, you should give it a try.
Click to expand...
Click to collapse
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Edit: I managed to do it through initialization. I'll update when it's done.
Edit 2: It worked! Thanks so much!
ztmj96 said:
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Click to expand...
Click to collapse
Your PC is recognizing your phone? If not maybe you shall update your drivers first. My S6 is the same model number as yours and it does appears in the Emergency Recovery list.
Another solution could be trying to flash using another version of Odin; I saw a similar problem on another forum and it was solved using Odin 3.10 to reflash the stock firmware.
Also remember that you can't downgrade your firmware once that you are on 5.1.1, no 5.02 or so allowed.
ztmj96 said:
How did you do it? I've installed the Smart Switch software but the device doesn't appear under the list in emergency software recovery, so I can't proceed.
Click to expand...
Click to collapse
By the sounds of it you're able to boot into twrp? If so then simply boot into twrp, connect to your computer and copy a flashable rom to your phone and install it using twrp instead of odin
1qazwsx4 said:
By the sounds of it you're able to boot into twrp? If so then simply boot into twrp, connect to your computer and copy a flashable rom to your phone and install it using twrp instead of odin
Click to expand...
Click to collapse
How could I transfer the flashable ROM to the phone when I can't have it boot up to connect to my computer?
Gallitho said:
Your PC is recognizing your phone? If not maybe you shall update your drivers first. My S6 is the same model number as yours and it does appears in the Emergency Recovery list.
Another solution could be trying to flash using another version of Odin; I saw a similar problem on another forum and it was solved using Odin 3.10 to reflash the stock firmware.
Also remember that you can't downgrade your firmware once that you are on 5.1.1, no 5.02 or so allowed.
Click to expand...
Click to collapse
Since you're using the same model as mine, what are you running on your S6 right now? Are you able to root and flash a custom ROM like XtrestroLite onto Android 5.1.1?
Can you guys help me check if this post has the correct steps or is it missing anything like bootloader and root?
reddit.com/r/GalaxyS6/comments/39wwf6/should_i_install_xtrestolite_rom/cs7b7yq
ztmj96 said:
Since you're using the same model as mine, what are you running on your S6 right now? Are you able to root and flash a custom ROM like XtrestroLite onto Android 5.1.1?
Click to expand...
Click to collapse
Actually yeah. Earlier tonight I flashed XtreStoLite over stock 5.1.1, but I must confess it wasn't as easy as I thought, mainly because I didn't followed the steps in the right way and I ended up having to root my phone through installing UniKernel, which is pre-rooted and that did the trick for me, because I got stuck in the Samsung logo right after I tried to flash with CF-AutoRoot, needless to say I obviously couldn't root with that method and had to reflash stock 5.1.1 firmware to unbrick my phone, install UniKernel, and after that I was able to enter my phone config, uncheck the reactivation block under Find My Mobile settings (which was the reason for me to get stuck at the S-logo) and then flash through Odin XtreStoLite deodexed and Xposed FW too, so I can tell you for sure that SM-G920I can run XSL like a charm.
Gallitho said:
Actually yeah. Earlier tonight I flashed XtreStoLite over stock 5.1.1, but I must confess it wasn't as easy as I thought, mainly because I didn't followed the steps in the right way and I ended up having to root my phone through installing UniKernel, which is pre-rooted and that did the trick for me, because I got stuck in the Samsung logo right after I tried to flash with CF-AutoRoot, needless to say I obviously couldn't root with that method and had to reflash stock 5.1.1 firmware to unbrick my phone, install UniKernel, and after that I was able to enter my phone config, uncheck the reactivation block under Find My Mobile settings (which was the reason for me to get stuck at the S-logo) and then flash through Odin XtreStoLite deodexed and Xposed FW too, so I can tell you for sure that SM-G920I can run XSL like a charm.
Click to expand...
Click to collapse
1. So what is the correct order?
2. Did you have to manually unlock bootloader?
3. And is it a must to install uniKernel in order to root the device?
I have no idea how to proceed now.
This requires a lot more effort than I thought :fingers-crossed:
1. The correct order apparently WAS to flash 5.1.1 bootloader and modem over 5.0.2, then root, then TWRP, then flash XtreStoLite, or at least that was what I understood from Edgar's guide (as you can tell, I hurried myself too much and was to excited to flash XLS, so I didn't read properly).
Since I (and I think you did too) installed stock 5.1.1 first, there was no way to autoroot nor ping-pong root the device, that was the reason I got stuck in the Samsung logo screen after trying to autoroot, so I had to reflash stock 5.1.1 to regain access to the device settings/Find My Mobile as I explained before, after that I flashed UniKernel and that did the trick, no other steps were required to achieve root access beyond this point.
2. I didn't had to, but your carrier may have locked yours. My device is a SM-G920I (as yours) from Telcel carrier, so I can tell for sure.
3. There are several others way to root devices running over 5.0.2, but according to my personal research there aren't much options on 5.1.1 other than flash a pre-rooted kernel, but UniKernel isn't the only pre-rooted kernel, so you can choose whichever you like the most.
If I were you the first thing I'd try, as I said earlier, would be to switch to another Odin version or another firmware (as long as it is 5.1.1) and if that don't do the trick, then I'd update drivers and try via Smart Switch again.
Gallitho said:
1. The correct order apparently WAS to flash 5.1.1 bootloader and modem over 5.0.2, then root, then TWRP, then flash XtreStoLite, or at least that was what I understood from Edgar's guide (as you can tell, I hurried myself too much and was to excited to flash XLS, so I didn't read properly).
Since I (and I think you did too) installed stock 5.1.1 first, there was no way to autoroot nor ping-pong root the device, that was the reason I got stuck in the Samsung logo screen after trying to autoroot, so I had to reflash stock 5.1.1 to regain access to the device settings/Find My Mobile as I explained before, after that I flashed UniKernel and that did the trick, no other steps were required to achieve root access beyond this point.
2. I didn't had to, but your carrier may have locked yours. My device is a SM-G920I (as yours) from Telcel carrier, so I can tell for sure.
3. There are several others way to root devices running over 5.0.2, but according to my personal research there aren't much options on 5.1.1 other than flash a pre-rooted kernel, but UniKernel isn't the only pre-rooted kernel, so you can choose whichever you like the most.
If I were you the first thing I'd try, as I said earlier, would be to switch to another Odin version or another firmware (as long as it is 5.1.1) and if that don't do the trick, then I'd update drivers and try via Smart Switch again.
Click to expand...
Click to collapse
What did you use to root? May I ask for the link? I just tried flashing CF AutoRoot and now I think it's bricked again. (RECOVERY IS NOT SEANDROID ENFORCING) I'm thinking it might be due to incompatibility because I got it from here (https://autoroot.chainfire.eu/#odin) and the Android version states 5.0.2.
ztmj96 said:
What did you use to root? May I ask for the link? I just tried flashing CF AutoRoot and now I think it's bricked again. (RECOVERY IS NOT SEANDROID ENFORCING) I'm thinking it might be due to incompatibility because I got it from here (https://autoroot.chainfire.eu/#odin) and the Android version states 5.0.2.
Click to expand...
Click to collapse
Yep, that was the exact moment where mine got stuck too, as I stated before at that time I had to reflash stock firmware. The trouble is caused by CF-Autoroot, it won't work at all when you're on 5.1.1 (at least with SM-G920I) and if you try to root using this method, you'll get stuck with the message "RECOVERY IS NOT SEANDROID ENFORCING". You'll have to reflash to stock too, I'm affraid...
Flash UniKernel via Odin once you're on 5.1.1 stock again and see the magic happen. Once you have root access, gained by this kernel, you can install TWRP and flash XtreStoLite or any other rom you may want. Here is the direct link to the post: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Hope you get lucky.
Gallitho said:
Yep, that was the exact moment where mine got stuck too, as I stated before at that time I had to reflash stock firmware. The trouble is caused by CF-Autoroot, it won't work at all when you're on 5.1.1 (at least with SM-G920I) and if you try to root using this method, you'll get stuck with the message "RECOVERY IS NOT SEANDROID ENFORCING". You'll have to reflash to stock too, I'm affraid...
Flash UniKernel via Odin once you're on 5.1.1 stock again and see the magic happen. Once you have root access, gained by this kernel, you can install TWRP and flash XtreStoLite or any other rom you may want. Here is the direct link to the post: http://forum.xda-developers.com/galaxy-s6/samsung-galaxy-s-6--s-6-edge-unified-development/kernel-stockmod-kernel-t3100395
Hope you get lucky.
Click to expand...
Click to collapse
I just did that before you suggested it and it worked! I was so elated! I love you bro (no homo). Our situations are identical. Now I have XtrestroLite running on the S6! Thank you so much!
Simply put:
1. Update bootloader and modem
2. Install TWRP without root via Odin
3. Install UniKernel via TWRP
4. Install ROMs!
ztmj96 said:
I just did that before you suggested it and it worked! I was so elated! I love you bro (no homo). Our situations are identical. Now I have XtrestroLite running on the S6! Thank you so much!
Simply put:
1. Update bootloader and modem
2. Install TWRP without root via Odin
3. Install UniKernel via TWRP
4. Install ROMs!
Click to expand...
Click to collapse
Glad to read that, dude!
Yep, our situations are identical and also happened at the same time haha.
Now's time to enjoy! :good:
Hello,
I rooted my s5 way back when it first came out but I haven't upgraded the firmware at all. From what I remember I had trouble installing a custom recovery so the phone is only rooted. I would like to bring it up to the most current version of android. What's the easiest way to do that? I'm on baseband version G900PVPUIAND2.
Thanks in advance.
Edit: I found this https://forum.xda-developers.com/showthread.php?t=2742994 which had a link to the stock factory image but sammobile doesn't seem to be hosting it anymore. Is there another reliable place that I can get it? Or would just doing a factory reset of my phone make it so I can start taking OTA's again?
The latest stock firmware for G900V is Marshmallow QC1. You can download it here and use ODIN to flash it:
https://www.androidfilehost.com/?fid=457095661767155677
If you want to root it you can use CF-Autoroot in ODIN. This will trip Knox if not already tripped (but probably doesn't matter on an older phone like this).
https://download.chainfire.eu/408/CF-Root/CF-Auto-Root/CF-Auto-Root-kltespr-kltespr-smg900p.zip
If you want to install TWRP you can use ODIN again:
https://twrp.me/devices/samsunggalaxys5qualcomm.html
Good luck.
Hi forum,
first of all,
I am a new member here and my name is harry.
I am a newbie regarding flashing and so on.
Anyway my problem
I could root a SM t-585 with the nougart os (7.0)
Everything worked fine until I tried to flash the TWRP recovery
with the TWRP App via Nougart os!
Result:
Hanging at the first screen...Introduction .. Samsung 10.1... bla,bla...
I opend the device and removed the battery connection..!
I still can manage odin, I can flash the boot section but I cannot flash any recovery!
Odin waits and says ....Get pit for mapping...!
What does this mean?
May I throw my Tab into trash?
Sorry for my terrible English
Greetings from Germany
Harry
This is forum for NOTE 10.1 NOT for TAB you are posting in the wrong forum .
Does this mean you have flashed stuff for Note on TAB ??
I could root a SM t-585 with the nougart os (7.0)>>
>>You do not root with an OS .
Everything worked fine until I tried to flash the TWRP recovery
>> Flash TWRP tar through Odin .
I still can manage odin, I can flash the boot section but I cannot flash any recovery!
>> I really dont understand are you flashing a bootloader ??
Suggest you flash your stock rom via Odin first .
THX for your quick response..
Ohh no... ..my fault, you are right wrong forum and
yes I rooted via odin!
( I guess it was to late yesterday..)
I was simply trying to say that odin is still working
and I only could flash the bootloader stuff.
Flashing of recovery firmware doesn't work anymore.
You are quite right with your suggestion, but where can
I get the stock rom from? This is my major problem!!
I appreciate your patience.
regards
You need to ask in your phones forum.
Probably sammobile or updato.com
Sent from my SM-N930F using XDA-Developers Legacy app
I guess I can throw my Tab into trash!
I've got all the firmware's for flashing from your
suggested site for my TAB A6 10.1 LTE
but
my flashing stops all the time with the message
Get pit for mapping!!
How knows this message?
Thx again
You need to ask in your phones forum.
PIT partition information table is damaged .
Find pit file and flash through Odin .
You need to ask in your phones forum.