My htc u11 is just relock, then when it back factory reset ask me for password, but they touchpal force close
I can't enter password
I can't enter twrp because relock
I was trying to flash ruu over download mode but always said FAIL19 RU_MAIN_VER_FAIL os-version in android-info missing or i
My HTC U11 is 2PZC10
CID is HTC__39
zeropop2018 said:
My htc u11 is just relock, then when it back factory reset ask me for password, but they touchpal force close
I can't enter password
I can't enter twrp because relock
I was trying to flash ruu over download mode but always said FAIL19 RU_MAIN_VER_FAIL os-version in android-info missing or i
My HTC U11 is 2PZC10
CID is HTC__39
Click to expand...
Click to collapse
I also S-ON
I try flash ruu all version i can, but return error:
19_RU_MAIN_VER_FAIL
Please help
are you try with fastboot commands using windows prompt?
all ruu for htc u11 ------>https://docs.google.com/spreadsheets/d/15JL3tRWDSVOUKo_revEYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit#gid=0
Yes, i try
fastboot rebootRUU
then
htc_fastboot flash zip "firmware_xxx.zip"
it always give me error:
htc_fastboot v3.0.9.2 (2015-05-29)
target rom version: 2.47.1405.2
found large-zip header, file count: 23
processing file 1/23...
sending 'zip' (391927 KB)...
OKAY [ 15.204s]
writing 'zip'...
(bootloader) HOSD CL#1002308
(bootloader) ERR Model ID not matched
(bootloader) ERR [SD_UPDATE_ERR] MODEL ID NOT ALLOWED
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 10
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 10
(bootloader) [email protected]
FAILED (remote: 10 RU_MODELID_FAIL modelid in android-info mismatched )
finished. total time: 23.238s
htc_fastboot finished. total time: 28.075s
I don't know what to do know, anyway my firmware version is: 2.33.710.9
fabrizio b92 said:
are you try with fastboot commands using windows prompt?
all ruu for htc u11 ------>https://docs.google.com/spreadsheets/d/15JL3tRWDSVOUKo_revEYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit#gid=0
Click to expand...
Click to collapse
Which version is right ?
zeropop2018 said:
Which version is right ?
Click to expand...
Click to collapse
where do you live? single or dual sim? is it brand or is it free sim?
can you reboot in fastboot mode? here you can find all information
for example my phone codename is ocndugl = DUGL DUAL SIM EMEA
this is my htc u11 fastboot----- >https://drive.google.com/file/d/19g5JiOs72VV_GKjh9f7b51B6cUN0TtKW/view?usp=sharing
Or if you can reinstall twrp recovery, you can bypass pin screen
Follow this instruction ------> https://forums.oneplus.com/threads/fix-wrong-pin-pattern-when-restoring-twrp-nandroid-backup.452384/
fabrizio b92 said:
where do you live? single or dual sim? is it brand or is it free sim?
can you reboot in fastboot mode? here you can find all information
for example my phone codename is ocndugl = DUGL DUAL SIM EMEA
this is my htc u11 fastboot----- >https://drive.google.com/file/d/19g5JiOs72VV_GKjh9f7b51B6cUN0TtKW/view?usp=sharing
Or if you can reinstall twrp recovery, you can bypass pin screen
Follow this instruction ------> https://forums.oneplus.com/threads/fix-wrong-pin-pattern-when-restoring-twrp-nandroid-backup.452384/
Click to expand...
Click to collapse
I live in Viet Nam. Single. Freesim i think so.
I can reboot in fastboot mode, but i cannot flash RUU, because all error.
My fastboot mode the same as you without RELOCKED, because i relocked it.
That's why i can't find way to reinstall twrp recovery.
Can somebody help ?
Is it brick and never go back ?
zeropop2018 said:
Can somebody help ?
Is it brick and never go back ?
Click to expand...
Click to collapse
Try to unlock bootloader and install twrp recovery to unbrick your phone for now
fabrizio b92 said:
Try to unlock bootloader and install twrp recovery to unbrick your phone for now
Click to expand...
Click to collapse
How to unlock if i can't go to usb debug ?
To sum it up, he
1. somehow tinkered with his phone when unlocked
2. relocked bootloader before restoring a stock pristine system
3. is now soft bricked cause he needs to RUU which isn't available as of yet, and we don't know if it'll get leaked
4. he can't boot to OS to re-unlock, S-OFF to downgrade, due to the above mentioned problems.
We're out of options here for the time being. Only one who might currently be able to restore the device might be HTC Support. But that may cost him, as they'll see that the device has been tinkered with.
Sent from my HTC U12+ using XDA Labs
zeropop2018 said:
How to unlock if i can't go to usb debug ?
Click to expand...
Click to collapse
If you have saved the unlock token from the first time you unlocked the phone, you can use this token again!
Simply flash unlock_code.bin with the command:
fastboot flash unlocktoken Unlock_code.bin
scotty2000 said:
If you have saved the unlock token from the first time you unlocked the phone, you can use this token again!
Simply flash unlock_code.bin with the command:
fastboot flash unlocktoken Unlock_code.bin
Click to expand...
Click to collapse
I'm not the one who unlock it so i can't find it ....
Why it so hard
like a genius got too far into the tinkering and have done same. S-On so cannot change CID and re-locked so wont let me get into TWRP. Still have unlock bin but no joy as when I flashed custom it would have reset oem unlock to off so i get following:
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
Obviously can't get back into Android to enable said unlock so seemingly out of options unless there is a way to flip that byte.
---------- Post added at 03:26 PM ---------- Previous post was at 03:23 PM ----------
ngodber said:
like a genius got too far into the tinkering and have done same. S-On so cannot change CID and re-locked so wont let me get into TWRP. Still have unlock bin but no joy as when I flashed custom it would have reset oem unlock to off so i get following:
(bootloader) flash unlocktoken
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
Obviously can't get back into Android to enable said unlock so seemingly out of options unless there is a way to flip that byte.
Click to expand...
Click to collapse
Also device is Telstra and there is apparently not a single Telstra (Australia) RUU for U11 on face of earth.
---------- Post added at 03:54 PM ---------- Previous post was at 03:26 PM ----------
I do have a second Telstra U11 device around the house. Is there a way to image from that device to this one?
The problem is obvious. It's a Chinese phone. The firmware currently loaded is Chinese and you're trying to flash a Taiwanese firmware on a multi region cid.
My guess is that the phone has been messed with.
If flashing the same version firmware as what is on it now (2.47.1405.2) fails you will need to get the mid to check it matches the cid for region. If not you have problems ahead.
shivadow said:
The problem is obvious. It's a Chinese phone. The firmware currently loaded is Chinese and you're trying to flash a Taiwanese firmware on a multi region cid.
My guess is that the phone has been messed with.
If flashing the same version firmware as what is on it now (2.47.1405.2) fails you will need to get the mid to check it matches the cid for region. If not you have problems ahead.
Click to expand...
Click to collapse
Thank God i fixed my phone, i gave it to a friend and he had tool to s-off ...
Thank God
zeropop2018 said:
Thank God i fixed my phone, i gave it to a friend and he had tool to s-off ...
Thank God
Click to expand...
Click to collapse
So do you know what "tool" he had that fixed your phone?
Sent from my coconut frond hut using Tapatalk
mauiblue said:
So do you know what "tool" he had that fixed your phone?
Sent from my coconut frond hut using Tapatalk
Click to expand...
Click to collapse
He said that tool use to connect to china server
zeropop2018 said:
Thank God i fixed my phone, i gave it to a friend and he had tool to s-off ...
Thank God
Click to expand...
Click to collapse
Can I ask what that tool was? And where did he get it? . Also when he went s- off what did he do to fix it? Just curious as I have been following this thread . Thanks
Cool. Maybe I could could have connected to this "tool" and fixed my U11 [emoji20][emoji22]. I also "relocked" my phone and couldn't find figure out how to fix it. I had to send my phone to the HTC repair shop a couple weeks ago. Still waiting for a positive response from them.
Sent from my coconut frond hut using Tapatalk
Related
Delete it pls
are your sure bootloader it is not already unlocked?
because you said that you took it without rom
by the way where did you get stuck from htcdev site?
have you installed the prerequisites from htcdev?
did you put token correctly in the token field in order to receive unlock token.bin
also i think there is no ruu with ics firmware thats suits to your cid(i am not sure for that)
rzr86 said:
are your sure bootloader it is not already unlocked?
because you said that you took it without rom
by the way where did you get stuck from htcdev site?
have you installed the prerequisites from htcdev?
did you put token correctly in the token field in order to receive unlock token.bin
also i think there is no ruu with ics firmware thats suits to your cid(i am not sure for that)
Click to expand...
Click to collapse
I get it like this ...and yes i has made HTCdev unlock before and know how to make it...just not get to final step 13..phone restart and not see HTC menu where select YES and right now in top of bootloader say: "LOCKED" ... i not know what is do past person that own this phone... so i search option to fix this problem but not found it yet
blade_h said:
I get it like this ...and yes i has made HTCdev unlock before and know how to make it...just not get to final step 13..phone restart and not see HTC menu where select YES and right now in top of bootloader say: "LOCKED" ... i not know what is do past person that own this phone... so i search option to fix this problem but not found it yet
Click to expand...
Click to collapse
your situation is difficult and with S-ON you can't do much things
did you try to repeat the unlock method?
also try different ruu
i could suggest you to use S-OFF method but unfortunately your device it is not in working condition
Ya i try it again and try every RUU that i found for my phone but as i say tell me that "Main version is older"this message pop up after bootloader load "PG58IMG.zip" ...so i need to found some more new version and i think that will help...but i try all day and with no results :X...so for that i need help and options.. Thanks
..also when i try to get to
Code:
sudo fastboot oem rebootRUU
i get this on terminal
Code:
[email protected]:~$ sudo fastboot oem rebootRUU
...
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 3
(bootloader) [SD_HW_ERR] read data fail in CMD18
(bootloader) [SD_HW_ERR] SD: Read data fail..
(bootloader) [ERR] partition_read_emmc(732): error 2
(bootloader) Start Verify: 3
(bootloader) erase sector 130560 ~ 131071 (512)
(bootloader) emmc_erase(1852): sd_write_sector failed!
OKAY [ 0.084s]
finished. total time: 0.084s
and phone just reboot to bootloader
..Also i try this http://forum.xda-developers.com/showthread.php?t=1522351 but not found my phone because when is power off and i plug to USB phone automaticle power on to bootloader :X
Also try to brick my phone to stage where not start up and show QHSUSB_DLOAD like in treed but nothing happen ..phone only shut down...
Also i get last RUU-Pyramid-ICS-hTC-Europe-3.33.401.6-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-266171-signed.exe
extract rom.zip add my CID and remade zip fail ..rename it to PG58IMG.zip and put it to SD card...bootloader load 2 time right bar and after that i not see text where i say yes to install it :X
blade_h said:
Also i get last RUU-Pyramid-ICS-hTC-Europe-3.33.401.6-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-266171-signed.exe
extract rom.zip add my CID and remade zip fail ..rename it to PG58IMG.zip and put it to SD card...bootloader load 2 time right bar and after that i not see text where i say yes to install it :X
Click to expand...
Click to collapse
try it in this way
http://forum.xda-developers.com/showthread.php?t=1672425 (step 4.4.2)
rzr86 said:
try it in this way
http://forum.xda-developers.com/showthread.php?t=1672425 (step 4.4.2)
Click to expand...
Click to collapse
i know this tread and try it ..
Code:
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 0.040s
blade_h said:
i know this tread and try it ..
Code:
erasing 'cache'...
FAILED (remote: erasing error!)
finished. total time: 0.040s
Click to expand...
Click to collapse
something is wrong with your emmc i think
the only option i can give you is to use JTAG
rzr86 said:
something is wrong with your emmc i think
the only option i can give you is to use JTAG
Click to expand...
Click to collapse
Ya the last option is that...i search for RUU O2 UK with bootloader 1.27 that will fit my current(because i know that down upgrade is not allow) and think to try fastboot flash zip PG58IMG.zip comand because i think that this will work .....but i can`t found anywhere RUU ..can you say me some good sours... i check may be all that i found in xda
Thanks
blade_h said:
Ya the last option is that...i search for RUU O2 UK with bootloader 1.27 that will fit my current(because i know that down upgrade is not allow) and think to try fastboot flash zip PG58IMG.zip comand because i think that this will work .....but i can`t found anywhere RUU ..can you say me some good sours... i check may be all that i found in xda
Thanks
Click to expand...
Click to collapse
http://www.androidfiles.org/ruu/?developer=Pyramid
http://www.shipped-roms.com/index.php?category=android&model=Pyramid
http://www.tsar3000.com/Joomla/inde...riginal-roms&catid=65:htc-downloads&Itemid=98
i was searching an RUU O2 UK with ics firmware too but i couldn't find one nowhere
the only i have found was with gb firmware
edit:check this too
http://www.htcdev.com/devcenter/downloads/P400
the third one from the end.but it is only the update
rzr86 said:
http://www.androidfiles.org/ruu/?developer=Pyramid
http://www.shipped-roms.com/index.php?category=android&model=Pyramid
http://www.tsar3000.com/Joomla/inde...riginal-roms&catid=65:htc-downloads&Itemid=98
i was searching an RUU O2 UK with ics firmware too but i couldn't find one nowhere
the only i have found was with gb firmware
edit:check this too
http://www.htcdev.com/devcenter/downloads/P400
the third one from the end.but it is only the update
Click to expand...
Click to collapse
Ya i found this links before but also i not know how to use update fail from HTCdev...also i see that have ICS but for EUROPE version...i think that last owner of my phone fail on update and for that phone now is on this situation :X
Is possible to put on original GB 1.27 hboot and sign zip file so to by pass bootloader check and allow installation( to not say "Main version is old!") ?
blade_h said:
Ya i found this links before but also i not know how to use update fail from HTCdev...also i see that have ICS but for EUROPE version...i think that last owner of my phone fail on update and for that phone now is on this situation :X
Is possible to put on original GB 1.27 hboot and sign zip file so to by pass bootloader check and allow installation( to not say "Main version is old!") ?
Click to expand...
Click to collapse
i really don't know mate but i think it is impossible that thing
because we are talking about 2 different firmwares and 2 different hboot versions
original GB>1.17-1.18 hboot version
original ICS>1.27-1.29 hboot version
plus you are S-ON
I check IMAGE CRC on bootloader and everywhere show 0x0 ...i think that this is big problem :X ....what exact mean ? I try to everything without success :crying:
I see only opportunity now on JTAG but after invests 30$ for him if not start will be very stupid :X
blade_h said:
I check IMAGE CRC on bootloader and everywhere show 0x0 ...i think that this is big problem :X ....what exact mean ? I try to everything without success :crying:
I see only opportunity now on JTAG but after invests 30$ for him if not start will be very stupid :X
Click to expand...
Click to collapse
really don't know what is that X
i am out of ideas
only jtag is left
Hello, after looking into my problem all night (it is 4 a.m. now) I still cannot get my One X out of its issue.
Background to this story:
Bought this phone from a friend who had TWRP2 as the recovery, unlocked, s-on, supercid. I wanted to upgrade to a newer ROM, specifically Carbon on Jellybean 4.2.2, and I needed to update hboot to accept the newer ROM. Follow the procedures of multiple threads and they all lead me down the same path of re-locking your bootloader and let the install do the rest. However, the installer has failed multiple times (error codes 140 and 158) and I am now stuck and have no idea where to go next.
The current status of the One X is not to great. It now has a relocked bootloader, HBOOT version of 2.14.0000, A broken recovery, what seems to be a mismatched baseband, Stuck at FASTBOOT USB, no ADB, will not boot into a ROM, RUU will not complete its job (fails at sending ROM), and I am all out energy and grammar.
*Trying to re-unlock the bootloader via HTCdev will NOT unlock it.
I am stuck, (yea I am a noob). If you need anymore info, just ask.
I'm not entirely sure, but I think you should try and flash the stock recovery and then RUU. I couldn't find the stock recovery in RedPoint's compilation roll-up thread, but I found it on a youtube video when I searched "att one x stock recovery". After you get the stock recovery installed I believe you should be able to then RUU.
Flashing the stock recovery only really applies when you're trying to take an OTA, it isn't required for an RUU.
Sent from my Evita
whoooops just kidding then. might worth a shot to give it a try though? I was just tossing out ideas.
brotherross said:
I'm not entirely sure, but I think you should try and flash the stock recovery and then RUU. I couldn't find the stock recovery in RedPoint's compilation roll-up thread, but I found it on a youtube video when I searched "att one x stock recovery". After you get the stock recovery installed I believe you should be able to then RUU.
Click to expand...
Click to collapse
I am not exactly sure how to do that.
I honestly don't think that's going to help you anyway.
Sent from my Evita
timmaaa said:
I honestly don't think that's going to help you anyway.
Sent from my Evita
Click to expand...
Click to collapse
Alright, gonna need to fix it later. (Recovery still broken, I assume because of the failed RUU)
Which RUU are you trying to run?
Is this the AT&T version of the One X?
Be aware that running any Jellybean RUU (3.18, 3.17) with S-on and SuperCID will brick the phone. So if you were trying to run a JB RUU, it might actually be a good thing it didn't install.
If you were trying to run an older RUU (2.20, etc.) then it will fail since the hboot version is older (hboot 2.14 goes with 3.1x).
Do you still have a TWRP nandroid available (if not, whey the heck not?!?!). Have you tried to flash TWRP again using fastboot? If that works you can try to get your nandroid restored. With S-on, be aware that you will need to flash the boot.img for that ROM separately using fastboot.
---------- Post added at 09:21 AM ---------- Previous post was at 09:20 AM ----------
brotherross said:
After you get the stock recovery installed I believe you should be able to then RUU.
Click to expand...
Click to collapse
As already pointed out by timmaaa, this is incorrect. RUU installs stock recovery on its own, and stock recovery is therefore not needed for an RUU (only an OTA).
redpoint73 said:
Which RUU are you trying to run?
Is this the AT&T version of the One X?
Be aware that running any Jellybean RUU (3.18, 3.17) with S-on and SuperCID will brick the phone. So if you were trying to run a JB RUU, it might actually be a good thing it didn't install.
If you were trying to run an older RUU (2.20, etc.) then it will fail since the hboot version is older (hboot 2.14 goes with 3.1x).
Do you still have a TWRP nandroid available (if not, whey the heck not?!?!). Have you tried to flash TWRP again using fastboot? If that works you can try to get your nandroid restored. With S-on, be aware that you will need to flash the boot.img for that ROM separately using fastboot.
---------- Post added at 09:21 AM ---------- Previous post was at 09:20 AM ----------
As already pointed out by timmaaa, this is incorrect. RUU installs stock recovery on its own, and stock recovery is therefore not needed for an RUU (only an OTA).
Click to expand...
Click to collapse
Yes, this is the AT&T version.
I was trying to do an RUU with RUU_Evita_UL_Cingular_US-1.73.502.2_2FE6772699D8596307CC997452BB8D25.
Anytype of backup was made on the phone with TWRP, if TWRP still exists on the phone, it should be there.
I have not tried flashing TWRP back. I can try that next, can you point me in the right direction? Which version of TWRP do you recommend? (I am a noob)
"With S-on, be aware that you will need to flash the boot.img for that ROM separately using fastboot." I am not aware of this, (again, noob) do I just extract the boot.img from the zip and use 'fastboot flash boot boot.img' ?
It looks like the problem is that you're trying to run an RUU that is older than your current firmware version. So, you would need to use a later RUU. But, like Redpoint said, if you are s-on and SuperCID this will brick your device. Maybe what you should try first is flashing TWRP recovery again and seeing if you can restore a backup or even just flash another ROM.
Download TWRP 2.6 from here. Put the file in your fastboot folder. Connect phone in fastboot mode, open command prompt from within fastboot folder, issue the following commands:
Code:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
Code:
fastboot erase cache
Code:
fastboot reboot-bootloader
Now you can enter recovery on your phone and see if you can restore a backup. You are s-on so you will need to flash the boot.img from the ROM that's backed up after restoring it. If you didn't backup the boot partition you might be out of luck.
If this is the case, download a ROM (and gapps if it's an aosp ROM), extract the boot.img from the ROM zip and place it in your fastboot folder on your PC, copy the ROM zip (and gapps if applicable) to your phone, flash ROM zip (and gapps if applicable) in TWRP, reboot to bootloader, connect to pc, give this command:
Code:
fastboot flash boot boot.img
Reboot your phone and hopefully it will boot.
Sent from my Evita
timmaaa said:
It looks like the problem is that you're trying to run an RUU that is older than your current firmware version. So, you would need to use a later RUU. But, like Redpoint said, if you are s-on and SuperCID this will brick your device. Maybe what you should try first is flashing TWRP recovery again and seeing if you can restore a backup or even just flash another ROM.
Download TWRP 2.6 from . Put the file in your fastboot folder. Connect phone in fastboot mode, open command prompt from within fastboot folder, issue the following commands:
Code:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
Code:
fastboot erase cache
Code:
fastboot reboot-bootloader
Now you can enter recovery on your phone and see if you can restore a backup. You are s-on so you will need to flash the boot.img from the ROM that's backed up after restoring it. If you didn't backup the boot partition you might be out of luck.
If this is the case, download a ROM (and gapps if it's an aosp ROM), extract the boot.img from the ROM zip and place it in your fastboot folder on your PC, copy the ROM zip (and gapps if applicable) to your phone, flash ROM zip (and gapps if applicable) in TWRP, reboot to bootloader, connect to pc, give this command:
Code:
fastboot flash boot boot.img
Reboot your phone and hopefully it will boot.
Sent from my Evita
Click to expand...
Click to collapse
I may need to reiterate, that my bootloader is still locked.
MDAWG25 said:
Yes, this is the AT&T version.
I was trying to do an RUU with RUU_Evita_UL_Cingular_US-1.73.502.2_2FE6772699D8596307CC997452BB8D25.
Click to expand...
Click to collapse
This is why you are getting errors 140 and 158. As timmaaa mentioned, you can't run an older RUU than the hboot that is already on your phone. The RUU you stated is very old, the 1.73 firmware with 1.09 hboot that came out at the phone's release. You are on hboot 2.14, so once the RUU sees that your hboot version is greater than that of the RUU (1.09), it fails.
Thye 3.18 RUU (which comes with hboot 2.14) would be what you want. BUT as already mentioned, you should not run this with S-on and SuperCID, as there is a bug with the Jellybean RUUs where this combo will brick the phone (not fixable without JTAG or new motherboard).
Follow timmaaa's steps in the previous post.
---------- Post added at 10:40 AM ---------- Previous post was at 10:37 AM ----------
MDAWG25 said:
I may need to reiterate, that my bootloader is still locked.
Click to expand...
Click to collapse
You might be in a catch-22 here then. As you know, you can't install custom recovery with a relocked bootloader (and S-on). You can keep trying to unlock it, but I'm not sure if that can be done if the phone can't boot.
MDAWG25 said:
I may need to reiterate, that my bootloader is still locked.
Click to expand...
Click to collapse
Sorry, I missed that. As Redpoint said above, you might be in a catch 22 situation here unfortunately.
Sent from my Evita
Yeah, normally RUU would be the answer. But the RUU bricking bug mentioned is stopping you from going that route.
Keep trying to unlock the bootloader. If you were able to relock in the current condition, maybe you can unlock. Unlocking is quirky and will fail, then will succeed after multiple attempts. So just the fact it hasn't worked yet, doesn't necessarily mean it won't.
redpoint73 said:
Yeah, normally RUU would be the answer. But the RUU bricking bug mentioned is stopping you from going that route.
Keep trying to unlock the bootloader. If you were able to relock in the current condition, maybe you can unlock. Unlocking is quirky and will fail, then will succeed after multiple attempts. So just the fact it hasn't worked yet, doesn't necessarily mean it won't.
Click to expand...
Click to collapse
I am currently not home to interface with the device physically (RDP). I should be returning around 4PM EST.
The superCID was written by the previous owner. Writing a generic CID (like HTC_001) is not an option with s-on, is it?
*Are there any RUUs that won't brick when flashing?
<Sorry for the double post but this post is different then my last>
Interesting thing, I can still write the recovery image even though fastboot claims it is 'relocked'. Here is the command line output.
sending 'recovery' (8028 KB)...
OKAY [ 0.993s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.720s
The signature checking failed, but it still accepted the image. Not sure if this means anything.
You could try hex editing your CID back to its original CID, but it must be the original CID to match the CID that the RUU is looking for, not just any CID. In order for this to work your would need to have adb fully working though. Please note the method I linked to above is to gain SuperCID, but the principle is the same, you just want to change 11111111 back to CWS__001 for an at&t phone.
The only RUUs that won't brick are the lower ones, which you can't run because you're s-on.
Sent from my Evita
---------- Post added at 01:26 AM ---------- Previous post was at 01:25 AM ----------
MDAWG25 said:
Interesting thing, I can still write the recovery image even though fastboot claims it is 'relocked'. Here is the command line output.
sending 'recovery' (8028 KB)...
OKAY [ 0.993s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.720s
The signature checking failed, but it still accepted the image. Not sure if this means anything.
Click to expand...
Click to collapse
Can you actually enter recovery? The failed message tells me that it hasn't worked.
Sent from my Evita
timmaaa said:
You could try hex editing your CID back to its original CID, but it must be the original CID to match the CID that the RUU is looking for, not just any CID. In order for this to work your would need to have adb fully working though. Please note the method I linked to above is to gain SuperCID, but the principle is the same, you just want to change 11111111 back to CWS__001 for an at&t phone.
The only RUUs that won't brick are the lower ones, which you can't run because you're s-on.
Sent from my Evita
---------- Post added at 01:26 AM ---------- Previous post was at 01:25 AM ----------
Can you actually enter recovery? The failed message tells me that it hasn't worked.
Sent from my Evita
Click to expand...
Click to collapse
Fastboot claims it wrote the recovery image, it just failed the signature check, unless it reverted, should it still be there?
I am not home to try it. I am RDPing to my computer at home, which the phone is connected to. I should be home at 4PM EST (4 hours from now).
Here is a 'getvar all'
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.14.0000
(bootloader) version-baseband: 0.17.32.09.12
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.18.502.6
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT246*********** (omitted for privacy)
(bootloader) imei: 359****************** (omitted for privacy)
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4177mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-97c9a06e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
See anything out of the usual?
Being able to unlock the bootloader will solve all my issues, I should be able to try again when I get home.
It looks to me like it failed while writing, but I may be wrong. The info you just posted looks to be ok. I'd continue to try unlocking the bootloader.
Sent from my Evita
timmaaa said:
It looks to me like it failed while writing, but I may be wrong. The info you just posted looks to be ok. I'd continue to try unlocking the bootloader.
Sent from my Evita
Click to expand...
Click to collapse
I won't post again until 4pm est, as I do not have full access to the device.
Thank you for your help, I really do appreciate it.
EDIT:
SOLVED.
I found a copy of 2.16.401.3
https://mega.nz/#!BhtEgIiA!fsPkbqsG7fUVNVqgaWiPFxSH4lRVxeOjkcNbRO9bDb8
Hi everyone,
Screwed up my HIAEUHL last night trying to manually update using the Europe Nougat OTA (216.401.3) . Short story: renamed OTA to 2PQ9IMG.zip and flashed that in download mode. Stupid, I know. Consequently,I don't have an OS, and my OS version is 216.401.3. My last backups were of 156.401.70, and I can't simply downgrade because I did not, and cannot have/get S-OFF.
If anyone with a HIAEUHL RUU or .zip I can use to try install Nougat could send me a link, I would greatly appreciate it.
Any advise would also be appreciated.
you have OTA EU update?
amirinda said:
you have OTA EU update?
Click to expand...
Click to collapse
Yes, i do. I downloaded it on my device and copied it from the com.htc.updater folder. file size 0.99gb.
It looks like so:
OTA_HIA_AERO_UHL_N70_SENSE80GP_MR_HTC_Europe_2.16.401.3-1.56.401.81_release_492810evbpgcnz8yyo2zj8
Where you come from and whats youre CID?
I'm nothing yet...
so flash now: https://androidfilehost.com/?fid=817550096634743253
maikwars said:
Where you come from and whats youre CID?
Click to expand...
Click to collapse
I'm in Zimbabwe, but it was gifted from Dubai. The CID says HTC_J0015.
aha's not EU cid
Edit: sorry EU cid:
HTC Europe
modelid: 2PQ910000
cidnum: HTC__001
cidnum: HTC__034
cidnum: HTC__J15
cidnum: HTC__M27
cidnum: HTC__A07
cidnum: HTC__002
cidnum: HTC__016
It should work
zimbolimbo said:
Yes, i do. I downloaded it on my device and copied it from the com.htc.updater folder. file size 0.99gb.
It looks like so:
OTA_HIA_AERO_UHL_N70_SENSE80GP_MR_HTC_Europe_2.16.401.3-1.56.401.81_release_492810evbpgcnz8yyo2zj8
Click to expand...
Click to collapse
Would you please share the ota?
Thanks
scotty2000 said:
Would you please share the ota?
Thanks
Click to expand...
Click to collapse
I'd like to, but my internet upload speed is quite crappy. I'd need my phones connection to upload it.
zimbolimbo said:
I'd like to, but my internet upload speed is quite crappy. I'd need my phones connection to upload it.
Click to expand...
Click to collapse
Try this: try to get a 1.56 OTA, then open it and copy the firmware.zip to your desktop. Then shift+right click on your desktop and select new command window here.
From that command window do these commands:
"Fastboot oem rebootRUU"
"Fastboot flash zip firmware.zip"
Now you should be able to downgrade via flashing the 1.56 RUU of any kind, as long as it starts with 1.56
The_scam said:
Try this: try to get a 1.56 OTA, then open it and copy the firmware.zip to your desktop. Then shift+right click on your desktop and select new command window here.
From that command window do these commands:
"Fastboot oem rebootRUU"
"Fastboot flash zip firmware.zip"
Now you should be able to downgrade via flashing the 1.56 RUU of any kind, as long as it starts with 1.56
Click to expand...
Click to collapse
Thank yo for the reply. I tried your suggestion, but I got errors:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files\Minimal ADB and Fastboot>fastboot flash zip firmware.zip
target reported max download size of 751200000 bytes
sending 'zip' (65423 KB)...
OKAY [ 3.951s]
writing 'zip'...
(bootloader) HOSD CL#853511
(bootloader) ERR [SD_UPDATE_ERR] Main version NOT ALLOWED
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 19
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 19
(bootloader) [email protected]
FAILED (remote: 19 RU_MAIN_VER_FAIL os-version in android-info missing or i) finished. total time: 7.221s
C:\Program Files\Minimal ADB and Fastboot>
Would it be failing because I'm S-ON & Unlocked?
(I tried relocking, that failed too)
zimbolimbo said:
Thank yo for the reply. I tried your suggestion, but I got errors:
Would it be failing because I'm S-ON & Unlocked?
(I tried relocking, that failed too)
Click to expand...
Click to collapse
It probably is because you are s-on
The only thing you can really do now, is to download the RUU, and run it form your PC. Or if you have a microsd card, you could run that from download mode.
Also, there is TWRP for nougat, try using that! You could get CyanogenMod as a temporary fix. Too bad you can only s-off from stock.
download: https://androidfilehost.com/?fid=817550096634743253
copy as 2PQ9IMG to sd card
boot to download mode
flash with volume yes
should go with s-on, bootloader unlocked / relocked
The_scam said:
It probably is because you are s-on
Click to expand...
Click to collapse
I thought as much
The only thing you can really do now, is to download the RUU, and run it form your PC. Or if you have a microsd card, you could run that from download mode.
Click to expand...
Click to collapse
My thoughts exactly. Any idea where I can look for it? HTC Europe doesn't seem to publish ROMS the same way HTC USA does... (I wonder why)
Also, there is TWRP for nougat, try using that! You could get CyanogenMod as a temporary fix. Too bad you can only s-off from stock.
Click to expand...
Click to collapse
I have put TWRP on, and tried CM13, CM14.1 and even SenseO. TWRP tells me the installs are successful but rebooting doesnt yield a result, sometimes it was rebootig to bootloader, sometimes it was stuck in a bootloop. I will try CM14.1 again.
FYI, the download mode on my phone looks like this:
Code:
hTC download mode
*** UNLOCKED ***
htc_hiaeuhl PVT S-ON
LK-1.0.0.0000
RADIO-UNKNOWN
OpenDSP-UNKNOWN
OS-2.16.401.3
Dec 26 2016, 22:06:28 (853511)
amirinda said:
download: https://androidfilehost.com/?fid=817550096634743253
copy as 2PQ9IMG to sd card
boot to download mode
flash with volume yes
should go with s-on, bootloader unlocked / relocked
Click to expand...
Click to collapse
I have tried 156.401.70 to no avail, I doubt I'll have much luck with 156.401.81. The issue to me seems to be that my firmware updated to Nougat, hence OS version is now 2.16.401.3, and I can't downgrade because I was not S-OFF.
Any clue where I can try look for a HIAEUHL Nougat RUU?
Nougat RUU EU just not yet
zimbolimbo said:
I thought as much
My thoughts exactly. Any idea where I can look for it? HTC Europe doesn't seem to publish ROMS the same way HTC USA does... (I wonder why)
I have put TWRP on, and tried CM13, CM14.1 and even SenseO. TWRP tells me the installs are successful but rebooting doesnt yield a result, sometimes it was rebootig to bootloader, sometimes it was stuck in a bootloop. I will try CM14.1 again.
FYI, the download mode on my phone looks like this:
Click to expand...
Click to collapse
Are you wiping the system, data and internal storage before flashing cm14/13? Sometime they take up to 7 or so mins in initial boot
---------- Post added at 01:50 PM ---------- Previous post was at 01:49 PM ----------
zimbolimbo said:
I have tried 156.401.70 to no avail, I doubt I'll have much luck with 156.401.81. The issue to me seems to be that my firmware updated to Nougat, hence OS version is now 2.16.401.3, and I can't downgrade because I was not S-OFF.
Any clue where I can try look for a HIAEUHL Nougat RUU?
Click to expand...
Click to collapse
Yes, but sadly you may have to purchase a licence to ir-file.com just make sure it has your RUU.
The_scam said:
Are you wiping the system, data and internal storage before flashing cm14/13? Sometime they take up to 7 or so mins in initial boot
---------- Post added at 01:50 PM ---------- Previous post was at 01:49 PM ----------
Click to expand...
Click to collapse
I have wiped/factory reset etc. and still cm13/14.1 are not taking. Rebooting at the end of the installation keeps going to bootloader.
Yes, but sadly you may have to purchase a licence to ir-file.com just make sure it has your RUU.
Click to expand...
Click to collapse
I'll follow this up, thanks.
Check CID of your phone and find RUU for your Ultra in here: Androidfilehost
Source: http://forum.gsmdevelopers.com
Thanks @zohrann for sharing.
Fixed link
HTC U Ultra Dual Sim
My HTC is bricked and I can not access RUUmode, it is S-on and locked. There is no way to recover by fastboot? I tried but it leaves the message that is not possible in S-on. Thanks everyone for tries help me.
marcosviniciusf17 said:
My HTC is bricked and I can not access RUUmode, it is S-on and locked. There is no way to recover by fastboot? I tried but it leaves the message that is not possible in S-on. Thanks everyone for tries help me.
Click to expand...
Click to collapse
You need unlock your bootloader and use HTC Version Tool to downgrade to Nougat
Thanks @minhnewpro
At last we have now one place for the RUU.
I did notice a new Oreo RUU in Chinese forums but I think it's for a single SIM
ForceField said:
Thanks @minhnewpro
At last we have now one place for the RUU.
I did notice a new Oreo RUU in Chinese forums but I think it's for a single SIM
Click to expand...
Click to collapse
I saw it, i will wait for more Oreo RUU from other region.
HTC U Ultra Dual Sim
minhnewpro said:
You need unlock your bootloader and use HTC Version Tool to downgrade to Nougat
Click to expand...
Click to collapse
Thanks for answering! Yes, I tried this, however I can't get the code to paste into the htcdev site. Error message, incorrect command or unknown command appears. I have already researched several tutorials to confirm the command and I can't. Any tipos?
marcosviniciusf17 said:
Thanks for answering! Yes, I tried this, however I can't get the code to paste into the htcdev site. Error message, incorrect command or unknown command appears. I have already researched several tutorials to confirm the command and I can't. Any tipos?
Click to expand...
Click to collapse
Check your HTC driver, my driver version is HTC-Mobile-Driver-v4.17.0.001. Make sure PC reconized your phone and you have folder contain adb stuff.
Hey thanx for the collection, wanted to use it, but how do I fix the error "RU_MAIN_VER_FAIL os-version in android-info missing or i"? I have CID 034 so I used the CID_001_034 RUU.
TheGreatB said:
Hey thanx for the collection, wanted to use it, but how do I fix the error "RU_MAIN_VER_FAIL os-version in android-info missing or i"? I have CID 034 so I used the CID_001_034 RUU.
Click to expand...
Click to collapse
Make sure you download RUU for right version. Enter right version RUU Nougat on HTC Version Tool
etc: Dual Sim (DUGL) or Single Sim (UHL)
How to unlock bootloader if S ON, and can not access your phone (phone brick)?
banlc said:
How to unlock bootloader if S ON, and can not access your phone (phone brick)?
Click to expand...
Click to collapse
Anyone help me, please!, @minhnewpro giúp mình với.
@minhnewpro I tried, unlock the bootloader but it does not give results. I already checked the adb / fastboot package, drivers, but nothing solves it.
---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------
banlc said:
How to unlock bootloader if S ON, and can not access your phone (phone brick)?
Click to expand...
Click to collapse
I have the same problem
marcosviniciusf17 said:
@minhnewpro I tried, unlock the bootloader but it does not give results. I already checked the adb / fastboot package, drivers, but nothing solves it.
---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------
I have the same problem
Click to expand...
Click to collapse
Try reflash RUU if you are using android 7. Or reflash OTA file if you are using android 8.
Big Question
I install an RUU Rom but inow i have no IMEI and No Baseband Radio. how can i solve this?. Please.
adfy said:
I install an RUU Rom but inow i have no IMEI and No Baseband Radio. how can i solve this?. Please.
Click to expand...
Click to collapse
I'm running into this same issue. I can't boot into my phone. Phone keeps rebooting on my splash screen. I can go into only fastboot screen. When I try and select either Boot to Download or Boot to Recovery mode it gots to the htc screen and then reboots and goes to the splash screen thus continuously rebooting. I have an unlocked AT&T US HTC U Ultra. When i run the below getvar I don't get any sim data.
Code:
fastboot getvar all
(bootloader) version:0.5
(bootloader) ramdump-mode:false
(bootloader) variant:Surf eMMC
(bootloader) boot-mode:FASTBOOT
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0xe000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0xdbf000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0xdc000000
(bootloader) serialno:FA72R1703082
all:
Finished. Total time: 0.390s
I tried flashing with 2PZFIMG_OCEAN_NOTE_UHL_N70_SENSE80GP_NA_Gen_Unlock_1.64.617.3_Radio_1.0.U010051c\@70809_58.34_release_509387_signed_.......AJA.zip from gsmdevelopers, but I was unsucessfull. What I did for this was to run the following
Code:
fastboot reboot recovery
fastboot flash recovery 2PZFIMG_OCEAN_NOTE_UHL_N70_SENSE80GP_NA_Gen_Unlock_1.64.617.3_Radio_1.0.U010051c\@70809_58.34_release_509387_signed_.......AJA.zip
fastboot flash recovery 2PZFIMG_OCEAN_NOTE_UHL_N70_SENSE80GP_NA_Gen_Unlock_1.64.617.3_Radio_1.0.U010051c\@70809_58.34_release_509387_signed_.......AJA.zip
Invalid sparse file format at header magic
error: write_sparse_skip_chunk: don't care size 1297259318 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 760392502 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 223525686 is not a multiple of the block size 4096
fastboot: core/libsparse/sparse.cpp:131: int write_all_blocks(struct sparse_file *, struct output_file *): Assertion `pad >= 0' failed.
Aborted (core dumped)
Unsuccessful. Not sure what else to do.
your device is corrupted and cannot be trusted and will not boot
i can't recover anything
i try to recover twrp.img
same error message
and i try install ruu stock img
same problem
and lineage-18.1
fastboot oem unlock
same error
and i try htcdev website unlock
and Unlock_code.bin
nothing
HTC One (M9) - Прошивки - 4PDA
HTC One (M9) - Прошивки
4pda.to
Use Google Translator.
Thank you I have done all the steps Note that I applied it before posting but unfortunately The problem is still there
C:\WINDOWS\system32>fastboot oem get_identifier_token
...
(bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp
(bootloader) [KillSwitch] Last Byte is 0X00, disable unlock
(bootloader) [KillSwitch] oem unlock Turn Off!
OKAY [ 0.016s]
finished. total time: 0.016s
i do not have a rom installed currently and cannot get a RUU to flash completely
i do not have any recovery
can i install TWRP bootloader lock???
if i can how???
or any recovery app
hhhani said:
oem unlock Turn Off!
Click to expand...
Click to collapse
hhhani said:
do not have a rom installed
Click to expand...
Click to collapse
In this case you need ruu 3.32.841.4 only!
I have downloaded more than 10 ROMs and so far none of them work I never found this ROM and I searched a lot
hhhani said:
I have downloaded more than 10 ROMs and so far none of them work I never found this ROM and I searched a lot
Click to expand...
Click to collapse
Golv said:
ruu 3.32.841.4 only!
Click to expand...
Click to collapse
thank you very much
Thank you for your interest
But where can I find this rom?
I hope to get help from members
My device is now useless
hhhani said:
thank you very much
Thank you for your interest
But where can I find this rom?
I hope to get help from members
My device is now useless
Click to expand...
Click to collapse
I haven't seen this particular RUU on net. Try to find a person with XTC 2 Clip in your city (you can Unlock Bootloader with clip and Downgrade from Pie to Oreo with Oreo RUU - 2PZCIMG_OCEAN_UHL_O80_SENSE90GP_HTC_MR_Telstra_WWE_2.33.841.13_Radio_8998-002772TOV-1712061121_release_532564_combined_signed_2_4.zip ).
I found someone who owns XTC 2 clip
Unfortunately, it did not work, and the problem with the device was not solved
I hope to find the ROM you mentioned to me.