Hi!
I cant boot my honor 8 FRD-L09 into anything but fastboot. I started with flashing twrp from fastboot and it wouldnt boot into it i could only boot into android or erecovery. Then I flashed twrp into recovery and recovery2 and now i cant even go to erecovery and android wont boot either. What can I do?
which version of android are u on ?
Melkerem said:
Hi!
I cant boot my honor 8 FRD-L09 into anything but fastboot. I started with flashing twrp from fastboot and it wouldnt boot into it i could only boot into android or erecovery. Then I flashed twrp into recovery and recovery2 and now i cant even go to erecovery and android wont boot either. What can I do?
Click to expand...
Click to collapse
Did you unlock your bootloader first?
zakariya tomal said:
Did you unlock your bootloader first?
Click to expand...
Click to collapse
Yeah I did and nothing worked but I got my phone to work as normal by rollinbck to marshmallow from huawei offical update.app and dload forcing it. Now my bootloader is even locked.
Did you try dload method?
It should put your phone back to stock firmware.
I deleted my bootloader. Whatever rom I flash it's just went into bootloop and when it boot the second time it boot into Huawei erecovery. My model is mha L29 cc636. I used to run on Android 8.0. Plzzz help
Try typing "fastboot oem relock (your phone's unlock code)" but this method will factory reset your device.
okizen said:
Try typing "fastboot oem relock (your phone's unlock code)" but this method will factory reset your device.
Click to expand...
Click to collapse
Fastboot won't work since I deleted my bootloader. I couldn't get into fastboot mode.
hmm.....I didn't;t know you could delete the bootloader.
If your phone still goes to eRecovery, then you couldn't have deleted your bootloader. (Fastboot is the stage 2 boot loader, which loads the various other partitions for startup, boot or kernel + ramdisk for normal, recovery or kernel + recovery_ramdisk for recovery, and erecovery or erecovery_kernel + erecovery_ramdisk for eRecovery.)
In any case:
Power off
Hold volume down while plugging into computer.
That should start up fastboot.
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
Similar here with some differences. FRP-Locked, Phone unlocked, TWRP previously installed. I Can't install stock recovery because FRP locked. No Gapps, no keyboard, just some Huawei apps. OEM Unlock is grey, but bootloader unlocked.
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
MartyWeber28 said:
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
Click to expand...
Click to collapse
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Pranav Kumar said:
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Click to expand...
Click to collapse
Same here.
First you have to dload the main firmware file, then the renamed vendor.
MartyWeber28 said:
First you have to dload the main firmware file, then the renamed vendor.
Click to expand...
Click to collapse
When you try this method, the bootloader and phone (FRP) in locked state? Or Bootloader unlocked?
My phone is just booting just to Stock recovery, eRecovery or fastboot, but the "OS" won't boot. If I restart, or power on my phone just boot to eRecevery. Now in the fastboot mode the bootloader and FRP in locked state.
All software install failed.
No luck over 5-6 hours. All firmwares I want to flash ended "Software installation failed". In FF I find a B407 rollback package from Oreo, but its still not approved yet
same here, does anyone know how to fix it?
immichao said:
same here, does anyone know how to fix it?
Click to expand...
Click to collapse
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Mumtaz77 said:
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Click to expand...
Click to collapse
actually it boots, but i have an emui without google apps, and a greyed oem unlocking option, so i can't unlock
i ve same issue, frp and bootloader locked. all firmware stop at 5% no gapps and greyed oem setting (c10b521)
I do not know how to find the "magic" firmware that does not fail...
should you understand based on which criterion is installed the firmware, recovery version? version of the system? I have no idea
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
Click to expand...
Click to collapse
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
MysTiCy said:
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
I tried and ended with this error
"FAILED (remote: stat not match)
finished. total time: -0.000s"
Mumtaz77 said:
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
Click to expand...
Click to collapse
You relocked, then unlocked, and it didn't unlock? Strange. I know atleast that the same unlock/relock commands work with nougat and oreo. I've done it a few times.
360 is a full package(FULLOTA-MF-PV) for my model. Other models have different package numbers.
You need to have a full package. Make a folder "dload" on root of an SD-card, with "update.app"-file in it. I have also the "meta-inf" and "full_mainpkg.tag" there, but i don't know if they are really needed. Then just boot the phone with power+volup+voldown and it should install.
No. I relocked the bootloader, but after that and the "automatic" factory reset the phone not boot to the os, just to the erecovery. So i can not change the "OEM unlock" option to unlock again the bootloader.
The install. I'l know the install method, but not work. Any package what 8 want to install ended (after 5%) a "software install failed". Ok. The 360 PV package is a good one, but this package not work, if you want to roll back from a higher master version, like oreo. This package just work if you in nougat, or MM.
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
alimokhtarabadi said:
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
Click to expand...
Click to collapse
Yes, but it s needed flash recovery patched first...
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
hackintosh5 said:
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
Click to expand...
Click to collapse
The device starts, but how do I flash the frp partition without root?
I was trying to unroot I was on 9.0.4 and had magisk 17.1 and no twrp since i updated from 9.0.3 or whatever update was before. I factory reset and had no more root, and no twrp. I still had a unlocked bootloader so I went to adb and locked it and then it rebooted and gave me the red message "your device is corrupt and will not boot." it doesnt boot at all to anything not even recovery and I am just in fastboot. I tried MSMdownloadtool but it doesnt work. I am in windows test mode and tried but it would not show up on the msmdownloadtool. It doesnt connect. Also in adb it does not show up. Help me!!!!
it says bootloader is locked now in fastboot though i cannot boot in to anything
i just unlocked through fastboot so now im still stuck with just a unlocked bootloader
ChrisChris123 said:
i just unlocked through fastboot so now im still stuck with just a unlocked bootloader
Click to expand...
Click to collapse
install this - https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
ChrisChris123 said:
i just unlocked through fastboot so now im still stuck with just a unlocked bootloader
Click to expand...
Click to collapse
Msm download should work now as well with your bootloader unlocked
ChrisChris123 said:
i just unlocked through fastboot so now im still stuck with just a unlocked bootloader
Click to expand...
Click to collapse
MSM download will work.
Just download appropriate Qualcomm drivers before proceeding.
Use Volume Up while connecting to PC.
MSM should detect the device connected in any of COM ports.
Just go to this thread https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892 and follow procedures to recover your phone just like how it is when you bought your device. Also, it will lock your bootloader.