Related
I got mate 8 (Chinese version) about a week ago and it's an amazing device but it has a major issue with receiving notifications!!! Having an amazing phone with such major issue is like having a BMW with Toyota engine!!! Has anyone find any solution to this issue?
abbody8002 said:
I got mate 8 (Chinese version) about a week ago and it's an amazing device but it has a major issue with receiving notifications!!! Having an amazing phone with such major issue is like having a BMW with Toyota engine!!! Has anyone find any solution to this issue?
Click to expand...
Click to collapse
Hi there. I got the same problem (chinese version) Try to allow Auto start, keep wlan and mobile data on during sleep, allow app to run on backround and change the power plan to performance and let us know if it worked for you. Mine didnt work tho
NikGi said:
Hi there. I got the same problem (chinese version) Try to allow Auto start, keep wlan and mobile data on during sleep, allow app to run on backround and change the power plan to performance and let us know if it worked for you. Mine didnt work tho
Click to expand...
Click to collapse
I already tried that with no luck
abbody8002 said:
I already tried that with no luck
Click to expand...
Click to collapse
Me neither. Hopefuly someone else have better solution or huawei will release an update
abbody8002 said:
I already tried that with no luck
Click to expand...
Click to collapse
Do you also have problem with the google maps? It cant determinate the location on wlan and netowrks. Only if i switch on the GPS.
NikGi said:
Do you also have problem with the google maps? It cant determinate the location on wlan and netowrks. Only if i switch on the GPS.
Click to expand...
Click to collapse
I just checked and apparently I have the same problem
Great!! Lol. Cant find any solution for this either
This is so upsetting
abbody8002 said:
This is so upsetting
Click to expand...
Click to collapse
Maybe need to wait till the international rom is out and flash it??
I have no other choice
abbody8002 said:
I have no other choice
Click to expand...
Click to collapse
Keep me posted if you find any solution pls. Tnx
What's your model number?
charlieb620 said:
What's your model number?
Click to expand...
Click to collapse
NXT-AL10
OK I'll go with the L29 than.
Hi at all in the general page of Huawei Mate 8 in this forum speak that the problem isn't the Mate 8 but new version of Android, and change same option solve this problem, try to see it
Update from the new firmware B137 for AL-10. It seems the push notifications for FB messenger, whatsapp are working better now but gmail and viber doesnt. You still need to open the viber app to get the messeges or turn on the screen to get the emails... Tested after restarting phone and left it on sleep mode without opening any of the apps. Battery mode set on perfomance. If set on smart doesnt work. But the problem comes back if you free up the memory.
The other problem with google map still remains. It cant determinate your possition on network and wlans (battery saving mode) only if you switch to gps (high accuaracy)
B137 Update
I just updated to the B137 update, and I was able to get notifications from viber, twitter but not from whatsapp or snapchat so therefore I decided to update whatsapp via the hi app as it had an update. I updated it and after was then not able to receive any notifications from viber or twitter either. I deleted the whatsapp and re installed it again from the one in play store and was able to get twitter and viber notifications back again which was strange but i am still unable to get notifications from whatsapp and snapchat. ive checked permissions and notification settings between the four apps and they are all the same.
Any help would be greatly appreciated!
---------- Post added at 07:51 PM ---------- Previous post was at 07:34 PM ----------
meallad said:
I just updated to the B137 update, and I was able to get notifications from viber, twitter but not from whatsapp or snapchat so therefore I decided to update whatsapp via the hi app as it had an update. I updated it and after was then not able to receive any notifications from viber or twitter either. I deleted the whatsapp and re installed it again from the one in play store and was able to get twitter and viber notifications back again which was strange but i am still unable to get notifications from whatsapp and snapchat. ive checked permissions and notification settings between the four apps and they are all the same.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
And now i get no notifications from any app until i open up the app; such a good phone but such a same it has such a huge bug :/
The L29 does not have notification issues.
Sucks that only the AL10 has this issue :/
charlieb620 said:
The L29 does not have notification issues.
Click to expand...
Click to collapse
says who?
Sent from my Nexus 5 using Tapatalk
Hey guys,
So I recently downloaded the new Watchmaker app that was released for Tizen (finally), but I'm running into some issues and was wondering if you guys were experiencing the same problems or have any fixes.
The problems are basically to do with the sensors.. So for all of the watch faces, my steps are showing as 0, the weather is showing as default (something like 6 degrees with 95% POP), and heart rate doesn't update as it should. For the heart rate, if I reload the watch face, it updates with the newest heart rate (I think), but the steps and weather are stuck at default (0 for steps).
Mostly everything else works (battery, stop watch, time, etc...), but for some reason the steps and weather won't update. I have checked to see that the scripts were correct..
For heart rate it's {shr}, for steps it's {ssc}, weather is {wtd}.
So, anyone experiencing these issues or have any fixes? I'm definitely out of ideas.
Thanks
Wait for an update. It's still new and buggy for now.
Sensors don't work reliably for me either, it's an app issue as noted, steps are way off.
Sent from my SM-G935V using Tapatalk
There's an update due out this week to fix these issues.
Lakota said:
There's an update due out this week to fix these issues.
Click to expand...
Click to collapse
Where did you see that...I'm running the newest beta of the watch WM app, and steps still don't work.
Sent from my SM-G935V using Tapatalk
I read something about it over on the developers Google+ page.
It mentioned being updated and submitted to Google for approval so should be due about Wednesday.
Lakota said:
I read something about it over on the developers Google+ page.
It mentioned being updated and submitted to Google for approval so should be due about Wednesday.
Click to expand...
Click to collapse
Thanks, I hang out over there and all I've seen from Alex Curran (WM team) on things addressed in updates is below, which doesn't include a fix for reading sensors/getting accurate step data. However (some good news here) Alex did said today in a post on G+ that Tizen 3.0 (not released yet) will provide access to the watch sensors from native Tizen 3rd party apps. For some reason (known only so Samsung), currently only web apps (like the Facer app) have access to the step sensor, and WM (being a native Tizen app) can't access the watch's step sensor (at least not until Tizen 3.0 is released).
So hopefully Samsung will release Tizen 3.0 soon!
WM watch up stuff in progress...Have you seen anything else?
Two days ago, from Alex:
New Samsung Gear Companion App in Beta :
http://androidslide.com/watchmaker_tizen.tpk
- Fix for spaces in curved text
- Fix for some watchfaces showing black in AOD
- Fix for incorrect vibrations
Four days ago from Alex:
New Samsung Gear Companion App in Beta :
- Support for Tizen-based tap actions on watch, e.g. launch Alarm, S Health, etc
- Weekdays / month names localized to correct language
- Fixed {awname}
Watchmaker doesn't seem to like custom roms on rooted Samsung devices (KLTEDV with custom Nougat rom). I can get it on the phone but when trying to install the companion app to the watch (Gear S3) the phone crashes. All my other companion apps install without issue from phone to watch, it's just Watchmaker that doesn't want to play the game? Yes I do know that I can always go back to a stock rom but it just seems a bit unusual that this app is the odd one out amongst the rest?
I was able to install Watchmaker on my Gear S2 with a Samsung Note 3 on custom Kitkat rom (SlimROM). My issues so far are that I can't update the app on the Gear S2 (even though it states "installed" in the notification, I only see the installation icon looping indefinitely on the Gear Store on my phone) and Watchmaker can't update weather status anymore...
I'm having similar issues with my Gear S3 and Watchmaker.
I can build faces and scripts that run and update great in the app, but then don't function properly once loaded on the S3.
Examples: Temperature units are always displayed as C regardless of setting in both app and watch.
Temps and weather info don't udate on the watch. They just display whatever value they had when I pushed the face from my phone to the S3.
Timezone handling is off, even on my phone. Trying to set something as simple as UTC is horrific. And having a clock that displays the time at home when I'm traveling doesn't work no matter how I've defined the time zones. Very frustrating.
Ok...most of my issues seem to be resolved now. One problem was my phone somehow got stuck in a manual time zone mode. Fixed now. Took a couple of sending the eatch face to my watch but suddenly started displaying other timezones properly.
Ditto for weather status.
Only remaining problem was temps are still in Celcius, but some trivial math worked around that.
Sent from my SM-N910T3 using XDA-Developers Legacy app
My watch maker can't seem to find my gear s3. even after i reboot and do all the suggestions.
Hello guys! I've changed my smartphone and I've re-installed watchmaker, and now, I can't find a way to make the phone's battery level more frequent refresh.. I don't remember.. Thanks
WM S3 gear step counter
Dear friends,
WM obviously can not show steps from gear S3, using the sensor built in. Nevertheless there is a workaround using data from S-Health app. Now my question : step value on my gear shows 9012 steps, counter on s-health app shows equal value of 9012 steps,
but on watchface from WM it shows 14827 steps. Using {ssc} command for this value.
Does anybody has an idea where this value comes from, or how to setup that both values are equal.
By the way, setting for
Settings: Watch
Steps source for Gear S2/S3 (Samsung Health on Phone (Strategy 1)
Thanks for support
Peter
peter_mars said:
Dear friends,
WM obviously can not show steps from gear S3, using the sensor built in. Nevertheless there is a workaround using data from S-Health app. Now my question : step value on my gear shows 9012 steps, counter on s-health app shows equal value of 9012 steps,
but on watchface from WM it shows 14827 steps. Using {ssc} command for this value.
Does anybody has an idea where this value comes from, or how to setup that both values are equal.
By the way, setting for
Settings: Watch
Steps source for Gear S2/S3 (Samsung Health on Phone (Strategy 1)
Thanks for support
Peter
Click to expand...
Click to collapse
It's the S-Health app on your phone since it's showing your combined steps from both phone and S3. I tried changing this in the S-Health app to stop counting steps on the phone and that did work, but now it seems to have stopped the S-Health auto-sync of getting the steps from the S3. When I launch the S-Health app on my phone, then it syncs them. I tried changing it back to combined and turned the phones step count back on to try and get auto-sync back, but it didn't fix it. Anyway, I'm now stuck with no autosync of steps from the S3 for my troubles.
If you want to try this as your, pardon the pun, mileage may vary, here we go, but note that this could put you in the same no auto-sync between S-Health and the S3 situation that I'm in now.
Open the S-Health app on your phone, select Steps to get to the steps main screen, select the hamburger menu and then select View your Step Count Data, select the mobile phone, now select the hamburger menu and you'll see how to stop the phone from counting steps. Then select the hamburger menu and select View your Step Count Data and set it to the S3 or All Steps since it's the phones S-Health step count is disabled.
Sent from my SM-T800 using XDA-Developers Legacy app
Sad... since this thread started.. this app STILL has problems..for me at least
I had a similar problem with the steps recorded by phone and gear. After I managed to filter only the steps from gear (in a custom app) I found out that the synchronization between the phone and gear is very bad. Even the steps count changes in the gear, the SHealth on my phone still displays the old value. If I disconnect and reconnect the gear it updates the value. Not reliable for a company app.
Thoughts?
Can't install companion app on Gear S3
Strange
I have Watchmaker on my Galaxy S8+ but when I try to install the companion app on my Gear S3 I receive an error msg saying that this app is not available any longer for purchase, or that it's not supported in my country or device.
I purchased the full version and have it installed on my phone.
please advise how to install .tpk in gear s3 frontier?
please advise how to install .tpk in gear s3 frontier?
farooqrehmani said:
please advise how to install .tpk in gear s3 frontier?
Click to expand...
Click to collapse
Use SDB (Smart Development Bridge) from your computer to install the tpk file.
1) To use the SDB in a target device, set the device to the SDB mode by going to Settings > More system settings > Developer options > USB debugging in the device menu.
2) Turn on wifi (not auto) on your watch and make sure the watch is connected to the same wifi as your pc.
3) Use sdb connect and sdb install commands to perform the install. More details about SDB here: https://developer.tizen.org/dev-guide/2.4/org.tizen.devtools/html/common_tools/smart_dev_bridge.htm
I just had a update on maps this morning and it works perfectly now!!! That used to be my only gripe with this phone aside from notifications. But since I got all my notifications to work now ,maps finally working makes this phone really great for my use!!!
What was the problem for Google maps? Mine worked perfectly since day one.
Sent from my CLT-L29 using Tapatalk
sniper20 said:
What was the problem for Google maps? Mine worked perfectly since day one.
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
If I tried to open maps it would take 5minutes to even show anything,then it was pretty much unusable still cause it would constantly lag after really bad
MixEvo said:
If I tried to open maps it would take 5minutes to even show anything,then it was pretty much unusable still cause it would constantly lag after really bad
Click to expand...
Click to collapse
I've never had such a problem with maps. They always load fast in 3-5 seconds.
weird , you are the only person here make a topic with google map problem )
hoangtu2410 said:
weird , you are the only person here make a topic with google map problem )
Click to expand...
Click to collapse
haha i guess i was the unlucky one :cyclops:
MixEvo said:
haha i guess i was the unlucky one :cyclops:
Click to expand...
Click to collapse
Unfortunately, he isn't the only one. My problem with GPS still here.
What did you do to fix it?
robsoncabanas said:
Unfortunately, he isn't the only one. My problem with GPS still here.
What did you do to fix it?
Click to expand...
Click to collapse
I received a update for maps and it just started working correctly. Didn't have to do anything
My Google maps is still not connecting to my car Bluetooth. What needs to be done. Has anyone facing the same problem. I got Huawei p20 pro.
You are the only one with Google maps problem?
Anyhow this is what the you need to do, first delete ALL you smartphones under Android Auto from your car system settings, from system settings also remove Bluetooth devices, now in your phone remove Android Auto, Reboot phone and re-install Android Auto and plug in to your car run setup
i dont know if this has already been answered but i have the android auto connected to my car so i can use google maps as a satnav through my car system and mid directions it will cut out and go to the home screen on the computer interface. when i click back on maps it continues my journey but whilst on the home screen no directions are read out. its super annoying and was wondering if anyone knew how to fix it?
Hey guys! And what about Google Timeline? Does it work on your Huawei P20 Pro's? Cause I have a one which doesn't write a history of my positions, so my Google Timeline is empty? Does anyone know how to fix this?
Hi all.
Apologies if this has been addressed but I can't seem to find a solid answer. I have just bought a Gear S3 Non LTE version. I have enabled location and am using S Health / UA Record. Today I went for a parkrun without my phone, I got a GPS signal pretty quick but as I was running I noticed the Distance on the watched showed 0.0km. At the end of the run my watch sync'd with my phone, I can see my workout on S Health but the distance shows 0.0km. I can also see the map of the route but no markers.
I then tried using UA Record to do another quick run but same issue, distance showed as - - and wouldn't move.
I then tried a walk with my phone and the watch and the distance recorded fine.
Do I need nw phone with me to record distance? Surely not. Or am I just being a n00b and doing something wrong?
Thanks in advance.
Sheldon21 said:
Hi all.
Apologies if this has been addressed but I can't seem to find a solid answer. I have just bought a Gear S3 Non LTE version. I have enabled location and am using S Health / UA Record. Today I went for a parkrun without my phone, I got a GPS signal pretty quick but as I was running I noticed the Distance on the watched showed 0.0km. At the end of the run my watch sync'd with my phone, I can see my workout on S Health but the distance shows 0.0km. I can also see the map of the route but no markers.
I then tried using UA Record to do another quick run but same issue, distance showed as - - and wouldn't move.
I then tried a walk with my phone and the watch and the distance recorded fine.
Do I need nw phone with me to record distance? Surely not. Or am I just being a n00b and doing something wrong?
Thanks in advance.
Click to expand...
Click to collapse
Could be the permissions of the S health app, if your watch is recording the kms you are running then is the phone app.
Try using other app or grant the proper permissions. Definitly using a Galaxy/Samsung phone do better job. I am using with note 8 and no problems so far.
Thank you for the message! But the watch does not track the kms if the phone is not with me. Even when I sync later there are no kms. I see no distance if I run without my phone. I have tried with 3 apps and all have the same issue.
Sheldon21 said:
Thank you for the message! But the watch does not track the kms if the phone is not with me. Even when I sync later there are no kms. I see no distance if I run without my phone. I have tried with 3 apps and all have the same issue.
Click to expand...
Click to collapse
That's just weird, the watch must track your distance without the phone. I use mine to run and I leave my phone home, using spotify and the s health in the watch.
One thing I noticed is that I need to lock the GPS before running because it takes up to 10 minutes to lock (some said) if I don't lock it the watch doesn't track my distance.
Hi, I have a Xiaomi 10 pro
just updated to MIUI12
ever since then my watch has a "watch" logo on top which means is not not connected to bluetooth.
I have reset the phone's network setting a couple of times.
the watch is also reset.
I have used the Galaxy Wearable to connect the watch. It detected the watch and seems connected (but under bluetooth menu it just saved the watch setting without indicated connected)
the it stuck at the "finishing pairing" page.
Whenever it asked me for permission i either allow it when the apps open or allow it all the time.
but it just stay in that finishing parining page over 20 minutes.
any body faced this problem after updated to MIUI 12?
I am still on Miui 11 but after last security update for June had loads of issues with constant disconnect and errors with Samsung Galaxy Active 2 watch.
Gonna get rid of this and get a Mi Band 5.
I know it's totally different device but not using all the functionality currently.
Sent from my Mi 10 Pro using Tapatalk
I want to stick to a watch instead of a sport band.
Anybody could hint me?
I have tried to connect the watch to an earbud, it works perfectly fine. quick pairing and working.
however it is just not the case with the phone.
again my phone is pairing perfectly with other devices too like my car, earbud, headset.
As i do workout quite often, all the data are store in the watch and not going to the phone. also it is not uploading to the database when it is already connected to WIFI.
I have the same problem, after MIUI 12 my galaxy gear s3 can't connect to the phone, bluetooth is trying to connect but connection failed.
Tried to factory reset phone and watch - nothing helps.
I have the global rom on my mi 10 pro. I was getting the watch not staying connected. I held down the Galaxy Wearable app, hit info, and turned on auto start, and I've been fine since. Oh, I am using Galaxy Active 1 though, not 2.
mixxxk said:
I have the global rom on my mi 10 pro. I was getting the watch not staying connected. I held down the Galaxy Wearable app, hit info, and turned on auto start, and I've been fine since. Oh, I am using Galaxy Active 1 though, not 2.
Click to expand...
Click to collapse
But it doesn't make sense when the bluetooth connection is not even staying conencted, there is not going to help with the app with auto restart. I have still gave it a try which didn't help much.
But Thank you for the input anyways.
i thought its only me but yes i have samsung watch active 2 after miui 12 update i cant connect my phone gives a pincode to connect to the watch but the watch isnt showing any pincode to pair.
xnostra said:
i thought its only me but yes i have samsung watch active 2 after miui 12 update i cant connect my phone gives a pincode to connect to the watch but the watch isnt showing any pincode to pair.
Click to expand...
Click to collapse
Hi, as you said there is no pincode popup, but can you see the device (in this case your active 2) when you open the bluetooth list from the PHONE?
rayraymond said:
Hi, as you said there is no pincode popup, but can you see the device (in this case your active 2) when you open the bluetooth list from the PHONE?
Click to expand...
Click to collapse
yes i can i tried alot of things but i guess miui 12 break the galaxy watch 2 active compatibility it was working perfect at miui 11
I don't have my watch with me, can someone check if disabling MIUI optimization helps with our problem.
https://c.mi.com/oc/thread-3251450-1-0.html?mobile=no
Disabling MIUI optimization SOLVES the issue!!!
Same with on MIUI 12 with Samsung Galaxy Watch - Got it working by putting on Developer Mode and turning off MIMUI optimization - works great but issues with WhatsApp - not reading the contact
vanaxe said:
Same with on MIUI 12 with Samsung Galaxy Watch - Got it working by putting on Developer Mode and turning off MIMUI optimization - works great but issues with WhatsApp - not reading the contact
Click to expand...
Click to collapse
Try clear WhatsApp App data, it will reset permissions and it should work again. You'll just have to backup and restore your whatsapp.
AlexDaizy said:
Try clear WhatsApp App data, it will reset permissions and it should work again. You'll just have to backup and restore your whatsapp.
Click to expand...
Click to collapse
Thank you, looks like it is work so far.
Also do you have a solution for the keyboard - when you reboot - it goes back to the default keyboard and not my preferred. Sugou Keyboard is therefore re-enabled as the default keyboard
Thanks again for your help
Brent
vanaxe said:
Thank you, looks like it is work so far.
Also do you have a solution for the keyboard - when you reboot - it goes back to the default keyboard and not my preferred. Sugou Keyboard is therefore re-enabled as the default keyboard
Thanks again for your help
Brent
Click to expand...
Click to collapse
Uninstall it https://forum.xda-developers.com/xiaomi-mi-10/how-to/guide-debloat-usable-chinese-rom-root-t4066909
Here is the link of apps you can uninstall
vanaxe said:
Same with on MIUI 12 with Samsung Galaxy Watch - Got it working by putting on Developer Mode and turning off MIMUI optimization - works great but issues with WhatsApp - not reading the contact
Click to expand...
Click to collapse
where did you find this option in developer mode, i cant find it. Are you on android 11 or....
marcel112 said:
where did you find this option in developer mode, i cant find it. Are you on android 11 or....
Click to expand...
Click to collapse
It's in developer option unless you are on eu which doesn't have it. I'm not sure about global rom
raven213 said:
It's in developer option unless you are on eu which doesn't have it. I'm not sure about global rom
Click to expand...
Click to collapse
i see thats why i cant find it, i'm on .eu:crying: