Related
Hi guys,
As mentioned in a previous thread, my F1 is soft bricked, only with the Oppo logo, no fastboot or recovery. I need to flash it again with a soft called QFIL (soft for Qualcomm devices). But it can't be done with the ordinary stock roms, I need a specific rom compatible with QFIL, like the ones used in the service centers. Is there anyone who can provide me with such a rom, or a link to download one in order to save my device?
Thank you
Can someone owning a Oppo f1 use QFIL to extract all the necessary files in order to flash them to my phone? I would be very grateful.
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
tb303lava said:
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
Click to expand...
Click to collapse
Hi, good news, I would be glad and would appreciate if you could send them to me.
Thanks in advance.
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
Hi, I downloaded the zip, followed your steps and...my phone is alive and everything works perfectly. Thank you so much for your help. Couldn't have been done without you.
How to choose the port?? I am not able to choose the port. When i connect it to pc whole holding volume up button it doesn't show anything.
sir is your file is from optus australia
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
oppo f1f from optus australia need qfill firmware
i m from india set come to me for sim unlock
i follow this guide (How To unlock Oppo F1f - Guide unlock network Oppo mobile F1f from youtube) to flash modified firmware
but at the first step i flashed magictricks.zip & set goes to qdloader 9008 mode after reboot
so i need optus australia firmware,thanks in advance
Need some help - Msm8x39DownloadTool.exe not finding phone
Qualcomm HS-USB QSLoader9008 on COM3, according to Device Manager, yet Msm8x39DownloadTool.exe doesn't want to find it at all - Device not connected.
Any help would be really appreciated.
Edit: I have made some progress with some steps not included above.
1) Disable 'Driver Signature Enforcement' in Windows (Google is your friend)
2) Before installing the provided drivers, hold the Volume Up button on your phone, and insert USB from PC > Phone. This places the phone into QHSUSB mode and will be found in Device Manager, under Ports (The Android Bootloader Interface (fastboot) device has an ID of '18D1-D00D', while the QHSUSB device ID is '05C6-9008'.. bingo!).
3) Install the driver as directed. This will change the device from QHSUSB mode to HS-USB QDLoader 9008 on COM3.
Continue with the rest of the guide.
Stock recovery will be returned (v1.2 Rooted - I don't remember this). From here you can install Project Spectrum again, and return back to ColorOS after that.
Hopefully this helps.
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this archive.
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
I tried this my phone has no Fastboot but recovery says V1.2(Rooted)
I tried this multiple times without luck.
As you still have access to stock recovery, you dont need to use download mode.
Simply put a stock rom zip on your sdcard and flash via the stock recovery. (might have to wipe data also if flashing a different version of the rom).
That will fix your phone.
To get access to fastboot (should you need to flash TWRP recovery), flash magictricks.zip via recovery.
If your phone is so busted you no longer have access to fastboot and recovery it will automatically default to QDloader mode (download mode).
If you want to access download mode while your recovery is still ok, switch phone off, hold Vol-Up (or Vol-down, can't recall) and plug in the usb cable.
AS LONG AS YOU HAVE ACCESS TO RECOVERY, USE THAT TO FLASH A STOCK FIRMWARE, GETTING THE QDLOADER DRIVERS CORRECTLY INSTALLED ON WINDOWS CAN BE RATHER TRICKY.
tb303lava said:
I have the, flashing tool and rom needed to unbrick the f1 from any softbricked state.
Let me know if you still need it, and I'll upload it somewhere and write a quick guide.
Worked for me even after I killed the bootloader.
Click to expand...
Click to collapse
Hey man can you help I've soft bricked my oppo, please need flashing tool and rom
phaw16 said:
I tried this my phone has no Fastboot but recovery says V1.2(Rooted)
I tried this multiple times without luck.
Click to expand...
Click to collapse
HEY BRO HOW DID YOU FIX YOUR F1f SAME PROBLEM HERE I TRY THE STEPS ABOVE BOT INSTALLATION FAILED WHEN FLASHING A ROM please HElp me ver 1.2(rooted)
after flashing my f1f just going to RECOVERY then its auto turn ON and recovery again. bootloop to recovery any fix?
tb303lava said:
QDLoader Flasher Drivers and Firmware.
This will unbrick the Oppo F1f even if bootloader has been corrupted.
How to:
Download and extract this
Install the QDLoader driver found in the DRIVER directory of the extracted archive.
Switch phone off, hold Vol-Up and connect USB cable between phone Pc .
Run Msm8x39DownloadTool.exe (in F1EX_11_A.05_160128 directory) as Administrator.
Select phone type (16GB or 32GB)
Choose the port your phone is connected to from the list. (It will be the one which says Com Device as Device Type.
Tick "Reset when .."
Click Start.
Let it do its thing, and bam! working stock F1f.
warning this will delete all user data.
Any questions PM me.
Al
Click to expand...
Click to collapse
thanks sir, its work
Edabigael said:
after flashing my f1f just going to RECOVERY then its auto turn ON and recovery again. bootloop to recovery any fix?
Click to expand...
Click to collapse
u neeed to flash OTA firmware from recovery, that what i did.. i use F1EX_11_OTA_002_all_201601170010.. put on your sd card and install
Hello Friends,
At last I figured out how to unlock bootloader, root & flash TWRP recovery !!
To achieve the above you should have some basic knowledge of adb, fastboot & flashing.
The usual warning... Try the following on your own risk, don't blame me if your device is dead, burnt or you lose your job because your boss couldn't contact you on your dead cell phone :laugh:.
Lets Begin !!
1) Download & install ADB-setup and Qiku Download Assistant.
2) Go to bootloader, switch off your phone and press and hold volume up button while connecting usb cable. When you see bootloader press volume up again to enter fastboot mode.
3) Go to device manager and you should see “Android or unknown” with a yellow exclamation mark under “other device”. You have to manually install fastboot driver here, just google it how to do it. You to have
go to C:\Program Files (x86)\Qiku\adb and select QK_ANDROID_ADB to install drivers.
4) Unzip the firmwares zip files.
5) Now to unlock bootloader we have flash the following firmware 6.0.018.P2.160720.QK8692.CPD but we have to force close Qiku flashing tool when flashing is at 1-2%. To do that open task manager on your pc before flashing and end Qiku flashing when the flashing is 1-2%.
6) Disconnect phone from pc and reconnect while pressing & holding volume up if you see completely black display it means now you have unlocked bootloader. Always refer to the device manager in your pc if your device is in fastboot mode as you would not see anything on the device display once you flashed the above mentioned firmware.
7) Go to the folder where you have the TWRP custom recovery. While in the folder press shift and right click and select “open command prompt here” from the menu. Copy “fastboot -i 0x1EBF flash recovery Qiku-TWRP-recovery.img” without quotes and paste in the cmd and enter.
8) Once Qiku TWRP recovery is flashed successfully lets boot the same from bootloader. While in the folder press shift and right click and select “open command prompt here” from the menu. Copy “fastboot -i 0x1EBF boot Qiku-TWRP-recovery.img” without quotes. Your device should boot in TWRP recovery.
9) In the TWRP recovery on your phone go to advance and select adb sideload and start the same.
10) Go to the folder where you have the SuperSu.zip and open command prompt here. Copy “adb sideload UPDATE-SuperSU-v2.78-20160905010000.zip” paste in the cmd and enter, without quotes.
11) Now if you wish to lock bootloader again then select reboot option in the recovery and select bootloader. Go to the folder where you have the emmc_appsboot.mbn file and open command prompt here. Copy “fastboot -i 0x1EBF flash aboot emmc_appsboot.mbn” without quotes and paste in the cmd and enter. This will lock the bootloader and you can always unlock the bootloader by following above mentioned instructions.
13) Copy “fastboot -i 0x1EBF reboot” in cmd and enter. This should reboot you phone.
14) If everything went well you should see supersu app in the phone. You can also check by an app called root checker from play store if you have successfully rooted your device.
When you have the unlocked bootlader there would be no display when you're in fastboot mode hence you have to check in device manager to ensure that the device is fastboot mode. Plus while booting or rebooting there would not be any boot animation but only the boot sound. This is due to the unlock bootloader.
Contents of the download link :
A) Stock firmware for the device v21. incase you have trouble and wish to flash stock firmware.
B) Firmware to unlock bootloader 6.0.018.P2.160720.QK8692.CPD.
C) 8692_I02 individual .img of stock.
D) adb-setup for adb & fastboot drivers
E) Stock aboot .img to lock bootloader.
G) Qiku download assistant.
E) Qiku TWRP recovery
F) SuperSu.zip.
Download link -- https://drive.google.com/drive/folders/0Bwy9M10qfmJLNElFemQwTTFXcTQ
Upgrade to the latest 360 OS, Android 6.0.1 and also activate VoLTE - https://forum.xda-developers.com/android/general/upgrade-qiku-cp8692i02-to-6-0-1-t3529352
Have fun :good::good:
Thanks! It's interesting method, but a little bit risky.
Zauq said:
Root Qiku Q Terra 808 (CP8692_I02), unlock bootloader & flash TWRP recovery
Click to expand...
Click to collapse
I want to change CP8692_I02 to CP8692, because i want up firmware android 6 Chinese Version
youngbi said:
I want to change CP8692_I02 to CP8692, because i want up firmware android 6 Chinese Version
Click to expand...
Click to collapse
You can change the same in buid.prop once you're rooted however you would not just be able to flash and boot Andoird 6 Chinese firmware on your device. I have tried the same but it does not work.
djking2 said:
Thanks! It's interesting method, but a little bit risky.
Click to expand...
Click to collapse
Not at all if you ask me as I have been playing with my device for past 8 months or so. I did hard brick my device at several occasions but was always be able to recover it. During those hard brick the device goes into fastboot mode on it's own or one can press and hold power key & volume up to force the device to go into fastboot mode which it always does.
To recover the device from hard brick it needs to be in fastboot mode whether locked bootloader or unlocked bootloader. If the bootloader is locked then the official tool can flash the stock firmware and boom... The device will be Alive again. Incase of unlocked bootloader it's just the matter of flashing the firmware .imgs through fastboot mode:good: or if you've taken backup in TWRP then just boot TWRP and restore your device.
One warning though... Do not try to flash any other OEM's firmware as I am not sure what would be the outcome as I have only tried our device OEM's firmware. Yes can try porting other custom rom to our device as it only involves flashing system.
i can confirm this mathod is 100% working thanks man
yogesh1970 said:
i can confirm this mathod is 100% working thanks man
Click to expand...
Click to collapse
:good::good::good::good::good:
please tell me why firmware 6.0.018.P2.160720.QK8692 is not booting
hello Zauq please help me
i have screwed modem.img of my qiku q terra .
i am able to write imei back but no signal because of screwed baseband.
i just flashed the baseband of moto x pure edition to enhance the lte signal and all this **** happens.
however i have backuped the modem 1 and modem 2 .img files via partion backup and restore . but forgot to backup modem.img
please provide me modem.img from your qiku phone so i can restore my signal
please :crying::crying::crying::crying::crying:
thanks
Zauq said:
yogesh1970 said:
hello Zauq please help me
i have screwed modem.img of my qiku q terra .
i am able to write imei back but no signal because of screwed baseband.
i just flashed the baseband of moto x pure edition to enhance the lte signal and all this **** happens.
however i have backuped the modem 1 and modem 2 .img files via partion backup and restore . but forgot to backup modem.img
please provide me modem.img from your qiku phone so i can restore my signal
please :crying::crying::crying::crying::crying:
thanks
Click to expand...
Click to collapse
I had backed up the modem using Flashfire app and I have uploaded the same. Check the given link in the original post, there is a new folder by Modem name.
Click to expand...
Click to collapse
hello Zauq thanks for ur reply. i flashed all the modem files but so signal
only u in this world can give breathe to my qiku
can you please give me QPST qcn backup made from qiku
it will repair my nvram files
please help
here is some info
download these driver
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
and install QPST
http://www.androidbrick.com/download/qpst-2-7-430-latest-qfil-qualcomm-flasher/
1 Enable Usb Debugging .
go adb fast boot and type
adb shell
2 Then
su
3Give Root Permission In Your Device . then type
setprop sys.usb.config diag,adb
This Comand Will Open DIAG COM Port
then go device manager under port tab there is qualcomm diagnostic port
then go to C:\Program Files (x86)\Qualcomm\QPST\bin\QPSTConfig
there u see ur port
uder start client
go to soft download
than backup tab
backup ur qcn
please give me that file
it will fix my nvram files and give me signal
my 20k depends on ur qcn backup
thanks
yogesh1970 said:
hello Zauq thanks for ur reply. i flashed all the modem files but so signal
only u in this world can give breathe to my qiku
can you please give me QPST qcn backup made from qiku
it will repair my nvram files
please help
here is some info
download these driver
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
and install QPST
http://www.androidbrick.com/download/qpst-2-7-430-latest-qfil-qualcomm-flasher/
1 Enable Usb Debugging .
go adb fast boot and type
adb shell
2 Then
su
3Give Root Permission In Your Device . then type
setprop sys.usb.config diag,adb
This Comand Will Open DIAG COM Port
then go device manager under port tab there is qualcomm diagnostic port
then go to C:\Program Files (x86)\Qualcomm\QPST\bin\QPSTConfig
there u see ur port
uder start client
go to soft download
than backup tab
backup ur qcn
please give me that file
it will fix my nvram files and give me signal
my 20k depends on ur qcn backup
thanks
Click to expand...
Click to collapse
I would love to help you but I hard bricked my device about 2 days ago while playing with emmc_appsboot.mbn . As you know to recover the device we need rawprogarm0.xml, patch0.xml etc and the stock rom doesn't contain any of the said files.
Fortunately, I am in touch with another Qiku user and I have already written to him about your requirement. I have also requested to him to respond to you on the xda forum itself. Let's wait for his response.
Besides, I was wondering if you know any ways to get the rawprogram0.xml, patch0.xml etc from a working Qiku for recovering my hard bricked device?? or any other method which can help?. Can Qdart tool help in anyway??.
I have searched Qiku Chinese forum but unable to find the required files.
Any help would be much appreciated :fingers-crossed::fingers-crossed::fingers-crossed: !!
Sure i ll send those files to you in a day or two!
yogesh1970 said:
please tell me why firmware 6.0.018.P2.160720.QK8692 is not booting
Click to expand...
Click to collapse
Not sure of the reason. I was just able to boot v109 which is 5.1.1 same as our current android version.
Help me with my hard brick phone qiku terra china version
Zauq said:
I would love to help you but I hard bricked my device about 2 days ago while playing with emmc_appsboot.mbn . As you know to recover the device we need rawprogarm0.xml, patch0.xml etc and the stock rom doesn't contain any of the said files.
Fortunately, I am in touch with another Qiku user and I have already written to him about your requirement. I have also requested to him to respond to you on the xda forum itself. Let's wait for his response.
Besides, I was wondering if you know any ways to get the rawprogram0.xml, patch0.xml etc from a working Qiku for recovering my hard bricked device?? or any other method which can help?. Can Qdart tool help in anyway??.
I have searched Qiku Chinese forum but unable to find the required files.
Any help would be much appreciated :fingers-crossed::fingers-crossed::fingers-crossed: !!
Click to expand...
Click to collapse
Help! l have qiku terra china after flash qk8692_l02 rom it is boot normal but l reflash to china qk8692_m02 so it not boot, black sreen, no led, only fastboot work. Help me !
cuongvietnam said:
Help! l have qiku terra china after flash qk8692_l02 rom it is boot normal but l reflash to china qk8692_m02 so it not boot, black sreen, no led, only fastboot work. Help me !
Click to expand...
Click to collapse
You mean you had a device QK8692_M02 and you flashed QK8692_I02 and booted normally but when you tried to go back to your QK8692_M02 it hard bricked??
Well my friend I am afraid but now you need to reflash QK8692_I02 to use the device and you might not be able to go back to your Chinese OS now. There was a similar case where this gentleman from Russia did the same thing to his Chinese Qiku device and he was not able to go back to Chinese OS now. There is something with the QK8692_I02 OS I guess.
I was able to boot v109 of Chinese OS on my QK8692_I02 and the v109 rom & the instructions are there on the given download link. I was in process of being able to use Chinese OS on my QK8692_I02 when I hard bricked my device . Now I need emmc image of Qiku to unbrick it and then I can continue my research and might be able to give solutions to the issue.
Let me know if you could get me that emmc image it would be just 200-300 mb file and the same you can upload it on google drive.
Zauq said:
You mean you had a device QK8692_M02 and you flashed QK8692_I02 and booted normally but when you tried to go back to your QK8692_M02 it hard bricked??
Well my friend I am afraid but now you need to reflash QK8692_I02 to use the device and you might not be able to go back to your Chinese OS now. There was a similar case where this gentleman from Russia did the same thing to his Chinese Qiku device and he was not able to go back to Chinese OS now. There is something with the QK8692_I02 OS I guess.
I was able to boot v109 of Chinese OS on my QK8692_I02 and the v109 rom & the instructions are there on the given download link. I was in process of being able to use Chinese OS on my QK8692_I02 when I hard bricked my device . Now I need emmc image of Qiku to unbrick it and then I can continue my research and might be able to give solutions to the issue.
Let me know if you could get me that emmc image it would be just 200-300 mb file and the same you can upload it on google drive.
Click to expand...
Click to collapse
Hi my friend! After l flash emmc in your folder it reboot to 360 company then load fastboot. l use qiku tool to flash stock rom but after complete it no boot sreen only black when plug in laptop it is bootloader coolpad driver. l can flash qk8692_m02 and qk8692_i02 but it not boot to logo and system! How to get it boot system ? Thank you!
somebody here can give me qcn backup from qpst tool from qiku ??
yogesh1970 said:
somebody here can give me qcn backup from qpst tool from qiku ??
Click to expand...
Click to collapse
Do You Still need it>?
thanks shubham cuongvietnam give me that file signal restored ok . but qiku models no gives full speed on gio networks where as RN3 pro is giving full
qiku 70 kbps
RN3 nd other models i tired 3 MBPS
any solution ??
yogesh1970 said:
thanks shubham cuongvietnam give me that file signal restored ok . but qiku models no gives full speed on gio networks where as RN3 pro is giving full
qiku 70 kbps
RN3 nd other models i tired 3 MBPS
any solution ??
Click to expand...
Click to collapse
Yes! You can use follow method:
1. Create a new APN
2. If you see on network icon is E not 3G that not support my EFS model(8692_m02) for you. So you can try a qcn file from same model.
Ulefone power 2 Development and Support-
Basic Device Details-
Display- 5.5 inch
OS- android 7.0 Nougat
Chipset - MT6757T
RAM- 4GB
Disclaimer-
Code:
i am not Responsible for any damage to Your Device..
official Firmware-
https://drive.google.com/drive/folders/0B8NC4kBpjQhYV1lWOEtYWThRRms
twrp Recovery-
https://drive.google.com/open?id=0B1aXJDZjE8bvM0h0aTVEOEdBS1U
SP Flash tools and Driver-
https://drive.google.com/folderview?id=0B6O3B5Tc7Wr9ZzgxQmcyNmNoX00
Magisk-
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
No verity opt-Encrypt-
https://www.androidfilehost.com/?fid=673368273298927206
extras-
Greenify for Battery-
http://m.hiapphere.com/apk-com.oasisfeng.greenify
Build.prop tweaks-
[Must Backup official before try-
https://forum.xda-developers.com/attachment.php?attachmentid=4248841&stc=1&d=1503381757
Guide-
Flash Firmware-
1. Install Vcom Driver Run SP flash tools, Load Scatter File , Check Everything and then click Download, as soon as connect your Switched off Phone.
Flash twrp-
Code:
fastboot oem unlock
fastboot flash recovery recovery.img
or use inbuild script
if you have Scatter then you can Flash with SP flash tools.
Root-
flash Magisk via twrp or you can also use Supersu 2.78XX.
Mod-
Will be added Soon....:good:
version- 3.00XX
Credit- XN Logos
Donation- https://Paypal.me/droiddeveloper
Please Don't create mirror Without the Link of This Page.
I tried it but it didn't work. twrp is installed but my phone doesn't boot into the system anymore. When I reboot it goes back to Twrp and then the touchscreen doesn't work anymore. I have to connect an USB-mouse. But it still doesn't boot.
When I try to flash or wipe sth it says "unable to mount"
I had to flash the original software again with SP Flash Tools
No flash No verity encrypt to Disable boot verification
XN Logos said:
No flash No verity encrypt to Disable boot verification
Click to expand...
Click to collapse
sorry but what does that mean?
So i used your TWRP Recovery, normally it should work and it does but why is my data shown as 0.
Thank you too. Please help
where is the scatter file?
gasperoni said:
where is the scatter file?
Click to expand...
Click to collapse
no Scatter included use Fastboot, or You can take scatter from ROM.
Ok but where is the recovery image file to flash via SP Flash Tools? I only see an exe-file saying "flash recovery" and a 12.6MB file called "rk" but it's shown me as a mp4-file
it worked!!! Thank yoU!! @gasperoni, just start "Flash Recovery.exe" and do what is written in the window. It's really easy.
i have include a Script which have ability to unlock bootloader and then flash twrp, if you flash with SP flash tool your Device not bootup because bootloader is Loacked. so Simply use Given Instruction Not SP flash.
any custom ROM
non yet
hm..i install twrp with your "flash recovery.exe", my phone reboots, i have to press "volume up" to unlock my bootloader. then trwp starts.
until here everything works fine. But when i am installing Superuser and restart my phone, it writes sth like "orange mode, your phone is untrusted" and just boots into twrp, touchscreen isnt working. So i have to flash it again, but i didnt achieve twrp of course :S
Unlucky25 said:
hm..i install twrp with your "flash recovery.exe", my phone reboots, i have to press "volume up" to unlock my bootloader. then trwp starts.
until here everything works fine. But when i am installing Superuser and restart my phone, it writes sth like "orange mode, your phone is untrusted" and just boots into twrp, touchscreen isnt working. So i have to flash it again, but i didnt achieve twrp of course :S
Click to expand...
Click to collapse
Same issue for me.
I tried twice to install the recovery with the .exe file. Both times I bricked the phone. Why?
kylebutler said:
Same issue for me.
I tried twice to install the recovery with the .exe file. Both times I bricked the phone. Why?
Click to expand...
Click to collapse
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash software says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
ml11ML said:
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash softwhttps://forum.xda-developers.com/usercp.phpare says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
Click to expand...
Click to collapse
I had also issues using the flash tool provided on the Ulefone website, the same as you say (with the checksum). None of checksum-generating software worked for me, so I was searching long for an alternative and found this flash tool: https://spflashtool.com/. Using this tool, flashing worked for me perfectly even without having to bother with checksums.
Good luck!
pavelmracek said:
I had also issues using the flash tool provided on the Ulefone website, the same as you say (with the checksum). None of checksum-generating software worked for me, so I was searching long for an alternative and found this flash tool: https://spflashtool.com/. Using this tool, flashing worked for me perfectly even without having to bother with checksums.
Good luck!
Click to expand...
Click to collapse
Thank you very much for this! That tool works flawlessly unlike the ulefone garbage.
On another note... anyone know if there is source code for the power 2 to be found somewhere or did the dev just port another recovery somehow? I tried a while back just porting twrp by swapping files but i couldn't get the image to repack with the kitchen tool so i gave up.
ml11ML said:
Same result here. But how did you get the factory rom to flash on the phone? I first got some checksum error and had to find a checksum generator and now the silly multiport flash software says:
" Warning maybe error as follows: 1 com port number repetitive or invalid 2 brom and preloader have the same comport number! Please modify them in INI file or scan again."
I think i did everything correctly (installed the drivers and stuff as it says on the ulefone download page) but i haven't flashed any mediatek devices in a long time and i would be very thankful if someone can tell me what i'm doing wrong. I don't mind it getting bricked as i know that is always a risk with mediatek, but i do need to be able to flash the stock rom.
Click to expand...
Click to collapse
hey, how did you set your IMEIs after bricking? I usually used Engineer Mode to set them, but thats not working since i am missing "CDS Information"
Unlucky25 said:
hey, how did you set your IMEIs after bricking? I usually used Engineer Mode to set them, but thats not working since i am missing "CDS Information"
Click to expand...
Click to collapse
Uh, i never even bothered to think about imei as it just worked without doing anything.
ml11ML said:
Uh, i never even bothered to think about imei as it just worked without doing anything.
Click to expand...
Click to collapse
ok nevermind, i found a solution..yeyy
so if anybody stumples across here, who has no IMEI set, CDS information in MTK mode and no rooted phone... u can set your IMEI in MTK engineering mode under "GPRS"!
Hello there.
My phone does not recognize the sim card. Also the baseband version is incorrect. M895310000.249.01.20x I would like help solving this problem. rawprogram0.xml and patch0.xml" files for p2a42 ?
I tried every way in the form site, but I did not get results. I am sorry for my English.
Try this.
https://forum.xda-developers.com/lenovo-p2/help/how-fix-signal-loss-t3823174
:angel:
j.jeedz said:
Try this.
https://forum.xda-developers.com/lenovo-p2/help/how-fix-signal-loss-t3823174
Click to expand...
Click to collapse
I have these files available and tried. I might have misplaced my steps. I will do a clean job again. I will follow it step by step. Good luck to us, I hope. I will write the result. Thank you
happy ending
j.jeedz said:
Try this.
https://forum.xda-developers.com/lenovo-p2/help/how-fix-signal-loss-t3823174
Click to expand...
Click to collapse
Thank you for saving my closed phone. I did not use the phone for two days. I think I made a mistake in QCN files in engineer mode.The signal came but 3g is not 4g :laugh:
gonulcelenk said:
Thank you for saving my closed phone. I did not use the phone for two days. I think I made a mistake in QCN files in engineer mode.The signal came but 3g is not 4g :laugh:
Click to expand...
Click to collapse
My pleasure.
Baseband version is abnormal?
https://ibb.co/c4rbfe
Sent from my LENOVO Lenovo P2a42 using XDA Labs
how to fix erased baseband problem
STEP 1
How to Fix EFS from Bootloader Mode using Fastboot commands
Setup ADB and Fastboot on your PC.
Enable Developer options & USB debugging on your Android device.
Connect your device to the PC and open a command window on the PC.
Issue the following commands one by one:
adb reboot bootloader
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
ref.
Quote:
https://www.theandroidsoul.com/fix-e...g-twrp-backup/
STEP 2
2,1 download this.
Quote:
https://androidfilehost.com/?fid=817550096634780916
2.2 and come here and do that step by step.
Quote:
https://forum.xda-developers.com/sho...99&postcount=2
2.3 extract file from 2.1 and boot ur phone in fastboot mode.
2.4 into folder in 2.3 and run flashall - stock reco.bat len it finish.
you will getback to MM. (6.0)
STEP 3
Check IMEI info *#06# if loss try STEP 1 once but if stay do step 4
if IMEI still loss try to Received OTA update 2-3 times.
STEP 4
4.1 Download qcn backup from this
Quote:
https://forum.xda-developers.com/sho...5&postcount=70
4.2 Download Qualcomm Flash Image Loader (QFIL) from this
Quote:
https://androidmtk.com/download-qual...ge-loader-qfil
STEP 5
5.1 Connect phone to PC and Go to engeneering mode press ####8899#.
5.2 run QFIL and in menu Tools chose QCN Backup Restore and browse files in 4.1 and press Restore ***don't forget tic Enable Multi-Sim
Success is disgusted by some people, and will not share any files for free in the future.
johnny886 said:
These materials can only be used for ROG Phone 5S_ZS676KS, and ROG Phone 5_ZS673KS cannot be used. I will release the materials for ROG 5 separately.
If your ROG Phone 5S ZS676KS only has edl mode (port 9008), then this tool can help you repair your phone through edl mode.
Or if you want to modify COUNTRY, flash the firmware of WW, you don't need to apply to unlock the Bootloader,
you don't need ROOT, just follow me.
1.Connect the phone to the computer through the USB port on the left, enter the fastboot mode,
and then open "Reboot-to-edl.bat" to enter the edl mode. Or enter fastboot oem enter-dload in cmd.
2.You must flash in the ENG firmware that I modified. If you find the firmware online,
you may lose your fingerprint and IMEI after flashing.
Method 1: The phone enters edl mode, and when you see port 9008 in the device manager,
open the ENG folder--open "0-update_image_EDL.bat"
Method 2: The phone enters edl mode, and after you see port 9008 in the device manager, use the XiaoMiFlash tool to flash in.
Method 3: The phone enters edl mode, and after you see port 9008 in the device manager,flash in through the QPST tool.
3.After flashing in the firmware and successfully booting up, be sure to back up your phone partition files. If your phone's fingerprint is lost or IMEI is lost,
it can be restored to normal. If you don't have a backup, it will be very troublesome.
Double-click to open "Backup.bat", it will automatically back up your phone partition files, you need to save these files, follow-up will definitely help you.
Include these 10 files：“persist.img factory.img modemst1 modemst2 asuskey4 fsg fsgCA fsc fsgCA2 fsgCA3”
Normally, you don’t need to restore these files. If your fingerprint or imei is lost and you need to restore these files to your phone,
please flash the ENG firmware, then put these 10 files into the ROG 5S folder, and double-click to open " Restore.bat" can be restored to your phone.
4.If your machine is an global version, after backing up and saving 10 files, directly enter the fastboot mode, open the WW folder-open "flash_raw_and_wipe_data.cmd" to flash the WW firmware, and successfully repair your ROG 5S.
If your machine is the CN version, and you want to flash into the WW Firmware, but don’t want to unlock the BootLoader, you can use WinHex to open the persist.img you just backed up,
find COUNTRY, change CN to WW and save it, and you can directly restore it to your phone through the dd command Inside, there is no need to unlock or install magisk.
Double click to open"Open-Cmd.bat",Then enter the commands one by one
adb push persist.img /sdcard/
adb shell
su
dd if=/sdcard/persist.img of=/dev/block/bootdevice/by-name/persist
Then enter the fastboot mode, open the WW folder-open "flash_raw_and_wipe_data.cmd" to flash the WW firmware.
File Downlaod Link：https://drive.google.com/file/d/10kp_87NukXt1XnTJ819I3Y0lH7vIB5T2/view?usp=sharing
YouTube:
I have also studied Hardwaresub Services for a long time, ROG1/ROG2/ROG3 only need to modify COUNTRY, CN to WW, and then flash into the global version,
there will be no such prompt. In addition to modifying COUNTRY, ROG 5 also needs to modify asuskey4.
In this partition, clear the imei, then there is no prompt. But I can’t do anything with ROG 5S.
This machine verifies modemst1 and modemst2. I tried it for a long time, but I couldn’t get rid of the prompt except for the whitelist.
If your ROG3/ROG5/ROG5S is the CN version, but you have flashed the WW firmware, you cannot unlock the Bootloader, or you are prompted to unlock successfully, but the Bootloader is still not unlocked after restarting, you can write the correct SSN and ISN of the phone Go to asuskey4, then restore to the phone partition, and then use the official unlocking tool to unlock it.
Click to expand...
Click to collapse
Sir Please Make For Rog 5 Im Stuck On this
johnny886 said:
If your ROG3/ROG5/ROG5S is the CN version, but you have flashed the WW firmware, you cannot unlock the Bootloader, or you are prompted to unlock successfully, but the Bootloader is still not unlocked after restarting, you can write the correct SSN and ISN of the phone Go to asuskey4, then restore to the phone partition, and then use the official unlocking tool to unlock it.
Click to expand...
Click to collapse
All of us, unfortunate owners of the tencent relocked ROG5, would be grateful if you could elaborate the following bits-
- Writing down SSN & ISN
- Going to asuskey4
- Restoring phone partition
Much appreciate your contribution here pal!
Can you share the WinHex version you're using?
I'm unable to get the same view you are seeing to find "Country".
@johnny886
Thanks!
Hi,
I don't reboot to edl
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
no root,
no unlock bl.
CN rog5s
Thanks
BirtyAs said:
Hi,
I don't reboot to edl
FAILED (remote: 'Command not supported in default implementation')
fastboot: error: Command failed
no root,
no unlock bl.
CN rog5s
Thanks
Click to expand...
Click to collapse
Wrong fastboot. Reboot to the bootloader, not fastbootd
I am having some issues getting it to work.
I currently have it bricked to the point of only showing up as a Qualcomm HS-USB QDLoader 9008 port .
I keep getting a sahara error after the program tries to run the firehose program.
Can you please help me with this problem.
Thank you.
So I managed to download the program via the 0_update_image_edl.bat file with my phone in EDL mode. However, my phone restarted and it is stuck on the republic of gamers logo.
I wonder why it isn't working. Is there something I am missing or does it take a long while to actually load everything during the first reboot after installation?
Edit:
It was my specific phone acting up and nothing to do with your firmware. I am not sure why I had to keep switching between the bottom and side port to get it to work but I eventually got my phone working using the files you provided. Thank you so much for these files, if not for you, my phone would still be bricked.
It seems like I am always finding something new, even when I have access to my phone now.
My storage is only 64 gb out of the 256 gb it normally has. Any idea how to fix this issue?
Edit, found the fix.
Step 1. I had to ensure that I made a back up of the 10 files stated in the instructions. This is important as not having these files will probably brick a phone.
Step 2. I deleted the extra partitions by setting the "erase all before download" and "reset after download" under "configuration" in the qfil app. Then I did the installation process using qfil.
It did not install correctly, but it was not the point of the process, the point was to delete all hidden partitions.
This deletes the 10 files from the phone as well (I think) and this is why the 10 files are important.
Step 3. I put my phone into edl mode via the reboot to edl .bat file you provided.
Step 4. I used the 0-update_image_edl.bat file to do the first part of the firmware installation process.
It rebooted and showed the page of the phones information. I thought this meant it kept all it's information, but this is a lie.
Step 5. At this point I placed all 10 files in the same folder as the restore.bat file
Step 6. I pressed the restore.bat file and it installed the 10 files.
Step 7. I then proceeded to do the second part of the installation by pressing the "flash_raw_and_wipe_data" file under "ww"
This installed the firmware and rebooted my phone. Now I have all my storage back.
//////////////////////////////
Note:
If the process above doesn't work for someone else. The thing that might have fix my phone could have been changing the setting in the "partition setting" under "configuration" in the "qfil app" that actually deleted the other partitions.
I think I set "customize physical partition" and "active partition number" to 1.
I did this right after saving my 10 files and before using the qfil app to attempt to install the first part of the firmware installation to my phone. This process would replace step 2. on this post.
twistedumbrella said:
Wrong fastboot. Reboot to the bootloader, not fastbootd
Click to expand...
Click to collapse
Thank you very much. I successfully swiped into ww and now I am trying to change COUNTRY. thx
What Winhex version are you using? I can't find the Country in the one im using. just showing the offset with a bunch of numbers.
Donlavon1 said:
What Winhex version are you using? I can't find the Country in the one im using. just showing the offset with a bunch of numbers.
Click to expand...
Click to collapse
Same question I had. Later using the Universal R/W script - I went via Root explorer and changed the text file.
JazonX said:
Same question I had. Later using the Universal R/W script - I went via Root explorer and changed the text file.
Click to expand...
Click to collapse
Need WinHex Professional Edition
No more booting possible, only the android logo flashes briefly, also no restart bootloader or recovery mode possible! what can I do?? thanks
MG4711 said:
No more booting possible, only the android logo flashes briefly, also no restart bootloader or recovery mode possible! what can I do?? thanks
Click to expand...
Click to collapse
I had something similar happen.
Does the computer register it as a device that can be seen or connected? If it DOES NOT CONNECT TO THE PC AT ALL, let it sit on the android logo while it is connected to the computer. In about 15 to 20 minutes it should reboot into a recovery mode like state and the PC will pick it up, something that didn't work when you attempted to use the androids power and volume buttons. It should say a few things and have about 2 options that say
1. delete files
2. reattempt
DO NOT SELECT ANY OF THOSE OPTIONS!!!
Instead, keep the phone plugged in and do not turn off the phone. Place it back into edl mode using adb or the "Reboot-to-edl.bat" file and attempt to reinstall the first portion of the firmware using the "0-update_image_EDL.bat" file.
(Note: You might need to mess with the device manager settings on your PC for the phone. The phone needs to have the ADB Driver to reboot to edl. After your phone gets into EDL mode, you may need to then set your phone to run with the qualcomm driver on your PC's device manager setting to allow you update the image edl. )
then after that fully installs, go to the next step which is the backing up the 10 files. This is the "Backup.bat" file.
This is important. If you fail to do this, you could end up bricking your phone as installing new firmware has a possibility of deleting your phones identity "IEMI" and without this info, your phone will not work. Make sure you keep this file even after you fully installed your software.
After downloading those 10 files. Go to the next step which is. pressing the "flash_raw_and_wipe_data.cmd" file in the WW folder.
(NOTE:
If this doesn't work, it probably means the IEMI information was deleted. Do not pay attention to what is shown on the android screen itself, the battery life and all the info on the screen is incorrect!! It might say something like you have 6000 mah of battery when in actuality you have 5 mah of battery. You will probably have to redo the installation and press the " Restore.bat" file after fully installing using the "0-update_image_EDL.bat" file. If you already have the 10 files, you do not have to resave the 10 files, as you already have them all.
In order to use the restore bat file. All 10 files have to be in the same folder as the "restore.bat" file, prior to pressing the "restore.bat" file.)
Trash.umu said:
I had something similar happen.
Does the computer register it as a device that can be seen or connected? If it DOES NOT CONNECT TO THE PC AT ALL, let it sit on the android logo while it is connected to the computer. In about 15 to 20 minutes it should reboot into a recovery mode like state and the PC will pick it up, something that didn't work when you attempted to use the androids power and volume buttons. It should say a few things and have about 2 options that say
1. delete files
2. reattempt
DO NOT SELECT ANY OF THOSE OPTIONS!!!
Instead, keep the phone plugged in and do not turn off the phone. Place it back into edl mode using adb or the "Reboot-to-edl.bat" file and attempt to reinstall the first portion of the firmware using the "0-update_image_EDL.bat" file.
(Note: You might need to mess with the device manager settings on your PC for the phone. The phone needs to have the ADB Driver to reboot to edl. After your phone gets into EDL mode, you may need to then set your phone to run with the qualcomm driver on your PC's device manager setting to allow you update the image edl. )
then after that fully installs, go to the next step which is the backing up the 10 files. This is the "Backup.bat" file.
This is important. If you fail to do this, you could end up bricking your phone as installing new firmware has a possibility of deleting your phones identity "IEMI" and without this info, your phone will not work. Make sure you keep this file even after you fully installed your software.
After downloading those 10 files. Go to the next step which is. pressing the "flash_raw_and_wipe_data.cmd" file in the WW folder.
(NOTE:
If this doesn't work, it probably means the IEMI information was deleted. Do not pay attention to what is shown on the android screen itself, the battery life and all the info on the screen is incorrect!! It might say something like you have 6000 mah of battery when in actuality you have 5 mah of battery. You will probably have to redo the installation and press the " Restore.bat" file after fully installing using the "0-update_image_EDL.bat" file. If you already have the 10 files, you do not have to resave the 10 files, as you already have them all.
In order to use the restore bat file. All 10 files have to be in the same folder as the "restore.bat" file, prior to pressing the "restore.bat" file.)
Click to expand...
Click to collapse
I have now sent the device back, now I get the rog 5 s and would like to flash it in German? are there any good instructions? Thank you for your help!!
MG4711 said:
I have now sent the device back, now I get the rog 5 s and would like to flash it in German? are there any good instructions? Thank you for your help!!
Click to expand...
Click to collapse
One of the languages for the ROG 5s WW version is Deutsch (Deutschland) or what we normally call german in the US.
There seems to be other forms of Deutsch as well. When initiating the phone, select Duetsch (Deutschland) to run it in the German language or go to settings - accessibility - Language - Duetsch (Duetschland)
Trash.umu said:
One of the languages for the ROG 5s WW version is Deutsch (Deutschland) or what we normally call german in the US.
There seems to be other forms of Deutsch as well. When initiating the phone, select Duetsch (Deutschland) to run it in the German language or go to settings - accessibility - Language - Duetsch (Duetschland)
Click to expand...
Click to collapse
I have to flash a ww version first, the original firmware is china and english
MG4711 said:
I have to flash a ww version first, the original firmware is china and english
Click to expand...
Click to collapse
The original post on this thread talks about the process of installing WW on a china phone. I recommend following the video that Johnny posted in his original post.
johnny886 said:
These materials can only be used for ROG Phone 5S_ZS676KS, and ROG Phone 5_ZS673KS cannot be used. I will release the materials for ROG 5 separately.
ROG Phone 5 ZS673KS Please see here:https://forum.xda-developers.com/t/...ootloader-to-modify-country-cn-to-ww.4353865/
If your ROG Phone 5S ZS676KS only has edl mode (port 9008), then this tool can help you repair your phone through edl mode.
Or if you want to modify COUNTRY, flash the firmware of WW, you don't need to apply to unlock the Bootloader,
you don't need ROOT, just follow me.
1.Connect the phone to the computer through the USB port on the left, enter the fastboot mode,
and then open "Reboot-to-edl.bat" to enter the edl mode. Or enter fastboot oem enter-dload in cmd.
2.You must flash in the ENG firmware that I modified. If you find the firmware online,
you may lose your fingerprint and IMEI after flashing.
Method 1: The phone enters edl mode, and when you see port 9008 in the device manager,
open the ENG folder--open "0-update_image_EDL.bat"
Method 2: The phone enters edl mode, and after you see port 9008 in the device manager, use the XiaoMiFlash tool to flash in.
Method 3: The phone enters edl mode, and after you see port 9008 in the device manager,flash in through the QPST tool.
3.After flashing in the firmware and successfully booting up, be sure to back up your phone partition files. If your phone's fingerprint is lost or IMEI is lost,
it can be restored to normal. If you don't have a backup, it will be very troublesome.
Double-click to open "Backup.bat", it will automatically back up your phone partition files, you need to save these files, follow-up will definitely help you.
Include these 10 files：“persist.img factory.img modemst1 modemst2 asuskey4 fsg fsgCA fsc fsgCA2 fsgCA3”
Normally, you don’t need to restore these files. If your fingerprint or imei is lost and you need to restore these files to your phone,
please flash the ENG firmware, then put these 10 files into the ROG 5S folder, and double-click to open " Restore.bat" can be restored to your phone.
4.If your machine is an global version, after backing up and saving 10 files, directly enter the fastboot mode, open the WW folder-open "flash_raw_and_wipe_data.cmd" to flash the WW firmware, and successfully repair your ROG 5S.
If you cannot flash the firmware in fastboot mode, the prompt: fastboot error CID () Mapping wrong Xrom!
You can Double click to open"Open-Cmd.bat",Then enter the commands, enter fastboot -v flash all xx.raw
xx.raw is the firmware on your computer, for example: fastboot -v flash all C:\Users\johnny\Desktop\ROG5\WW\WW_ZS673KS_18.0810.2101.95_M2.13.24.9-ASUS_1.1.46_Phone-user.raw
ASUS:
version display asus fastboot version and list support project.
-v flash all : disable asus raw id checking.
-g flash all : disable repartition.
-C flash all : disable CRC_<partition>.
If your machine is the CN version, and you want to flash into the WW Firmware, but don’t want to unlock the BootLoader, you can use WinHex to open the persist.img you just backed up,
find COUNTRY, change CN to WW and save it, and you can directly restore it to your phone through the dd command Inside, there is no need to unlock or install magisk.
Double click to open"Open-Cmd.bat",Then enter the commands one by one
adb push persist.img /sdcard/
adb shell
su
dd if=/sdcard/persist.img of=/dev/block/bootdevice/by-name/persist
Then enter the fastboot mode, open the WW folder-open "flash_raw_and_wipe_data.cmd" to flash the WW firmware.
File Downlaod Link：https://drive.google.com/file/d/10kp_87NukXt1XnTJ819I3Y0lH7vIB5T2/view?usp=sharing
YouTube:
I have also studied Hardwaresub Services for a long time, ROG1/ROG2/ROG3 only need to modify COUNTRY, CN to WW, and then flash into the global version,
there will be no such prompt. In addition to modifying COUNTRY, ROG 5 also needs to modify asuskey4.
In this partition, clear the imei, then there is no prompt. But I can’t do anything with ROG 5S.
This machine verifies modemst1 and modemst2. I tried it for a long time, but I couldn’t get rid of the prompt except for the whitelist.
If your ROG3/ROG5/ROG5S is the CN version, but you have flashed the WW firmware, you cannot unlock the Bootloader, or you are prompted to unlock successfully, but the Bootloader is still not unlocked after restarting, you can write the correct SSN and ISN of the phone Go to asuskey4, then restore to the phone partition, and then use the official unlocking tool to unlock it.
Click to expand...
Click to collapse
If i do this am i able to update my firmware from Asus or am i stuck with the modified one?