need helpe for thes p999 login prblem and info by lg tool
Connecting with P999
For connect with phone you must:
1. Unplug usb cable and reconnect battery
2. Press VolDown-key & PowerUp-key and wait for LG logo
3. Release PowerUp-key and wait for Download logo
4. Release VolDown-key and plug usb cable
Connected
Receiving phone info
Getting phone info
Model: P999
Platform: LG Qualcomm
Software Platform: Android
SDRAM Size: 64 MB + 512 MB
NAND Flash Size: 128 MB + 8 GB
CPU: MDM6200 + NVIDIA Tegra AP20H
Firmware Released: Mar 27 2011 10:12:24
Firmware Compiled: MAR 27 2011 10:00:00
Firmware Version: P9992097/M6600A-SCAUTNZ-2.0.9720T
IMEI: 012571-00-273213-5
Bluetooth Address: B0:89:91:E9:E1:03
Flash Device Name: H8BCS0QG0MMR
Flash Vendor ID: 0x000000ad
Flash Product ID: 0x000000b1
Flash FS Blocks: 0x000001c2
Flash Pages Per Block: 0x00000040
Flash Bytes Per Page: 0x00000800
Flash Bytes Per Spare: 0x00000040
Connect mode: Normal
Info received
Receiving phone info
Getting phone info
Model: P999
Platform: LG Qualcomm
Software Platform: Android
SDRAM Size: 64 MB + 512 MB
NAND Flash Size: 128 MB + 8 GB
CPU: MDM6200 + NVIDIA Tegra AP20H
Firmware Released: Mar 27 2011 10:12:24
Firmware Compiled: MAR 27 2011 10:00:00
Firmware Version: P9992097/M6600A-SCAUTNZ-2.0.9720T
IMEI: 012571-00-273213-5
Bluetooth Address: B0:89:91:E9:E1:03
Flash Device Name: H8BCS0QG0MMR
Flash Vendor ID: 0x000000ad
Flash Product ID: 0x000000b1
Flash FS Blocks: 0x000001c2
Flash Pages Per Block: 0x00000040
Flash Bytes Per Page: 0x00000800
Flash Bytes Per Spare: 0x00000040
Connect mode: Normal
Info received
Restoring to factory defaults
This phone require manual Factory Reset.
For Factory Reset you must:
1. Unplug usb cable and battery.
2. Plug battery and power on phone.
3. Type code 1809#*999# to call Qualcomm menu.
4. Go to "Factory Reset", select "OK" and reboot the phone.
5. Factory reset must be completed after next boot.
Factory defaults successfully restored
Unlocking phone
Unlock: Start
Getting phone info...
Getting phone info: OK
Switching to internal loader...
Switching to internal loader: OK
Sending external loader...
Sending external loader: OK
Switching to external loader...
Switching to external loader: OK
Dumping Security...
Dumping Security: OK
Backuping Security to file: Backups\P999_security_012571002732135_2012-5-5_6-15-53.sbf
Unlocking Security: OK
Flashing Security...
Flashing Security: OK
Switching to normal mode...
Switching to normal mode: OK
Unlock: Finish
Phone successfully unlocked
Don't forget to reconnect battery
Disconnected
i have moto e 2nd gen. xt1506 which is in AP fastboot flash mode (S) and when i unplug usb cable from pc it was dead, no power is on the phone every time i connect with the pc it will poweron with motorola logo and then came to AP fastboot flash mode and i tried to flash the stock firmware it states that failed remote failure and i attached what happened with that kindly someone give me how i have to flash with tools and methods step by step.
Thanking you.
Attached Thumbnails
Click image for larger version
Name: IMG_20160410_130628.jpg
Views: 10
Size: 256.1 KB
ID: 3714948 Click image for larger version
Name: IMG_20160410_130636.jpg
Views: 12
Size: 253.3 KB
ID: 3714949 Click image for larger version
Name: IMG_20160410_125830.jpg
Views: 10
Size: 255.4 KB
ID: 3714950 Click image for larger version
Name: IMG_20160410_125536.jpg
Views: 10
Size: 264.6 KB
ID: 3714951
please in need flash file for
zoyu y900
CPU Name: 8810/6820
Flash ID: 002C00BC
Flash Name: Micron MT29C4G48MAZAPAKD
I can´t flashing g950u. Error with odin 3.12.3, 3.12.5, 3.12.7, smart watch, z3x and chimera tool.
The screen was on earlier which is why I'm confused.
I cant really get a good picture but I can list the text here:
Build info: Apr 28 2017
Build info2: SWHE7706:dpi QB:13390971
Build Ver: FA70_G950UDQU1AQDB_11303241 [ user]
Chip Name: MSM8998
Chip Ver: 2.1
PM8998 Ver: 2.0/PM8005 ver: 2.0
HW Rev: 12
Model Name: SM-G950U
Serial Number
Cable: 3
Debug level: Mid
Carrier: SPR
Fused Open Loop Voltage: 986
CPR_IDDQ_INFO SILVER: 0x1A
CPR_IDDQ_INFO GOLD: 0x45
DDR Vendor: Samsung
Update fail
MDM MODE: CAN'T DOWNLOAD (bksecapp)
error chimera tool
RP SWREV: B1 (1, 1, 1, 1, 1) K1 S1
Downgrade: tz.mbn (1 -> 0)
solution??
mjrablvc said:
I can´t flashing g950u. Error with odin 3.12.3, 3.12.5, 3.12.7, smart watch, z3x and chimera tool.
The screen was on earlier which is why I'm confused.
I cant really get a good picture but I can list the text here:
Build info: Apr 28 2017
Build info2: SWHE7706:dpi QB:13390971
Build Ver: FA70_G950UDQU1AQDB_11303241 [ user]
Chip Name: MSM8998
Chip Ver: 2.1
PM8998 Ver: 2.0/PM8005 ver: 2.0
HW Rev: 12
Model Name: SM-G950U
Serial Number
Cable: 3
Debug level: Mid
Carrier: SPR
Fused Open Loop Voltage: 986
CPR_IDDQ_INFO SILVER: 0x1A
CPR_IDDQ_INFO GOLD: 0x45
DDR Vendor: Samsung
Update fail
MDM MODE: CAN'T DOWNLOAD (bksecapp)
error chimera tool
RP SWREV: B1 (1, 1, 1, 1, 1) K1 S1
Downgrade: tz.mbn (1 -> 0)
Click to expand...
Click to collapse
Hi
I have the same problem
Did you managed to get any solution for this??
Thanks in advance
looks like the screen that appears for the eng boot file. I had the same issue with a phone today. Probably a bad flash or file. Try flashing stock firmware from download mode via ODIN
snsmosko said:
Hi
I have the same problem
Did you managed to get any solution for this??
Thanks in advance
Click to expand...
Click to collapse
no solution yet
Get it in download mode and flash stock firmware again.
Before flashing engboot or combi, wipe cache and restart to bootloader
Hello
I've bricked Oppo F1s when I've tried to flash it
this is infinity read info log
Wait for phone...
Phone found! [ 1087 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122and I get this message error if I try to flash it with MT6750
Error: STATUS_INSUFFICIENT_BUFFER
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!
Operation Failed
Elapsed: 00:00:52
Reconnect Power/Cable!
Click to expand...
Click to collapse
it says that's an MT6755 processor , but when I try to flash it with Mt6755 with sp flashtool and NCK mtk soft it says that's version mismatch and it's and MT6750 device
Can you help to choose the right firmware please ?
octopus82 said:
Hello
I've bricked Oppo F1s when I've tried to flash it
this is infinity read info log
it says that's an MT6755 processor , but when I try to flash it with Mt6755 with sp flashtool and NCK mtk soft it says that's version mismatch and it's and MT6750 device
Can you help to choose the right firmware please ?
Click to expand...
Click to collapse
I have pretty much the same problem with my MOTO M (XT1662). It happened after I did the "Format whole flash" in SP flash tool.
Now the SP flash tool is giving me the following,
Chip Info
=======
Chip name: MT6755
Chip Version: 0x0000cb00
Ext Clock: EXT_26M
Extern RAM Type: DRAM
Extern RAM Size: 0xc0000000 (!!!)
SRAM Size: 0x00040000
EMMC Flash
=========
Boot 1 Size: 0x400000
Boot 2 Size: 0x400000
RPMB Size: 0x400000
GP1 Size: 0x0 (same for GP2, GP3 and GP4)
UA Size: 0x747c00000
No matter what ROM I'm trying to flash (stock or custom) , I always get the error "STATUS_INSUFFICIENT_BUFFER (0xC0010007)".
It looks like it has to do something with the External RAM Size (0xc0000000).
I found this firmware "XT1662_Kungfu_m_MT6755_USR_S0924_1612291517_mp7V2.3_CN (RepairMyMobile.in)", which seems to be what I need but I can't get pass this error.
Any help will be greatly appreciated.
i have the same problem
STATUS_INSUFFICIENT_BUFFER (0xC0010007)
i try to update with OTA and failed too
anyone can help ?