please in need flash file for
zoyu y900
CPU Name: 8810/6820
Flash ID: 002C00BC
Flash Name: Micron MT29C4G48MAZAPAKD
Related
i have moto e 2nd gen. xt1506 which is in AP fastboot flash mode (S) and when i unplug usb cable from pc it was dead, no power is on the phone every time i connect with the pc it will poweron with motorola logo and then came to AP fastboot flash mode and i tried to flash the stock firmware it states that failed remote failure and i attached what happened with that kindly someone give me how i have to flash with tools and methods step by step.
Thanking you.
Attached Thumbnails
Click image for larger version
Name: IMG_20160410_130628.jpg
Views: 10
Size: 256.1 KB
ID: 3714948 Click image for larger version
Name: IMG_20160410_130636.jpg
Views: 12
Size: 253.3 KB
ID: 3714949 Click image for larger version
Name: IMG_20160410_125830.jpg
Views: 10
Size: 255.4 KB
ID: 3714950 Click image for larger version
Name: IMG_20160410_125536.jpg
Views: 10
Size: 264.6 KB
ID: 3714951
I can´t flashing g950u. Error with odin 3.12.3, 3.12.5, 3.12.7, smart watch, z3x and chimera tool.
The screen was on earlier which is why I'm confused.
I cant really get a good picture but I can list the text here:
Build info: Apr 28 2017
Build info2: SWHE7706:dpi QB:13390971
Build Ver: FA70_G950UDQU1AQDB_11303241 [ user]
Chip Name: MSM8998
Chip Ver: 2.1
PM8998 Ver: 2.0/PM8005 ver: 2.0
HW Rev: 12
Model Name: SM-G950U
Serial Number
Cable: 3
Debug level: Mid
Carrier: SPR
Fused Open Loop Voltage: 986
CPR_IDDQ_INFO SILVER: 0x1A
CPR_IDDQ_INFO GOLD: 0x45
DDR Vendor: Samsung
Update fail
MDM MODE: CAN'T DOWNLOAD (bksecapp)
error chimera tool
RP SWREV: B1 (1, 1, 1, 1, 1) K1 S1
Downgrade: tz.mbn (1 -> 0)
solution??
mjrablvc said:
I can´t flashing g950u. Error with odin 3.12.3, 3.12.5, 3.12.7, smart watch, z3x and chimera tool.
The screen was on earlier which is why I'm confused.
I cant really get a good picture but I can list the text here:
Build info: Apr 28 2017
Build info2: SWHE7706:dpi QB:13390971
Build Ver: FA70_G950UDQU1AQDB_11303241 [ user]
Chip Name: MSM8998
Chip Ver: 2.1
PM8998 Ver: 2.0/PM8005 ver: 2.0
HW Rev: 12
Model Name: SM-G950U
Serial Number
Cable: 3
Debug level: Mid
Carrier: SPR
Fused Open Loop Voltage: 986
CPR_IDDQ_INFO SILVER: 0x1A
CPR_IDDQ_INFO GOLD: 0x45
DDR Vendor: Samsung
Update fail
MDM MODE: CAN'T DOWNLOAD (bksecapp)
error chimera tool
RP SWREV: B1 (1, 1, 1, 1, 1) K1 S1
Downgrade: tz.mbn (1 -> 0)
Click to expand...
Click to collapse
Hi
I have the same problem
Did you managed to get any solution for this??
Thanks in advance
looks like the screen that appears for the eng boot file. I had the same issue with a phone today. Probably a bad flash or file. Try flashing stock firmware from download mode via ODIN
snsmosko said:
Hi
I have the same problem
Did you managed to get any solution for this??
Thanks in advance
Click to expand...
Click to collapse
no solution yet
Get it in download mode and flash stock firmware again.
Before flashing engboot or combi, wipe cache and restart to bootloader
Hello
I've bricked Oppo F1s when I've tried to flash it
this is infinity read info log
Wait for phone...
Phone found! [ 1087 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122and I get this message error if I try to flash it with MT6750
Error: STATUS_INSUFFICIENT_BUFFER
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!
Operation Failed
Elapsed: 00:00:52
Reconnect Power/Cable!
Click to expand...
Click to collapse
it says that's an MT6755 processor , but when I try to flash it with Mt6755 with sp flashtool and NCK mtk soft it says that's version mismatch and it's and MT6750 device
Can you help to choose the right firmware please ?
octopus82 said:
Hello
I've bricked Oppo F1s when I've tried to flash it
this is infinity read info log
it says that's an MT6755 processor , but when I try to flash it with Mt6755 with sp flashtool and NCK mtk soft it says that's version mismatch and it's and MT6750 device
Can you help to choose the right firmware please ?
Click to expand...
Click to collapse
I have pretty much the same problem with my MOTO M (XT1662). It happened after I did the "Format whole flash" in SP flash tool.
Now the SP flash tool is giving me the following,
Chip Info
=======
Chip name: MT6755
Chip Version: 0x0000cb00
Ext Clock: EXT_26M
Extern RAM Type: DRAM
Extern RAM Size: 0xc0000000 (!!!)
SRAM Size: 0x00040000
EMMC Flash
=========
Boot 1 Size: 0x400000
Boot 2 Size: 0x400000
RPMB Size: 0x400000
GP1 Size: 0x0 (same for GP2, GP3 and GP4)
UA Size: 0x747c00000
No matter what ROM I'm trying to flash (stock or custom) , I always get the error "STATUS_INSUFFICIENT_BUFFER (0xC0010007)".
It looks like it has to do something with the External RAM Size (0xc0000000).
I found this firmware "XT1662_Kungfu_m_MT6755_USR_S0924_1612291517_mp7V2.3_CN (RepairMyMobile.in)", which seems to be what I need but I can't get pass this error.
Any help will be greatly appreciated.
i have the same problem
STATUS_INSUFFICIENT_BUFFER (0xC0010007)
i try to update with OTA and failed too
anyone can help ?
Hello, Can somebody upload a firmware for Qphone 7,1 It was bought in Italy and now its just in boot loop....
CPU: MT6735
SW: 8A00(0000)
VER: CA00
Flash Type: EMMC
Flash ID: EMMC
Flash Size: 0x3A3E00000->14910,0M
Flash Name: EMMCFlash
Hello i have A8 2018 sm-a530f which has the emmc files corrupted , i need to revive and when i connect to the Easy Jtag Plus i get the error Partition info not found ,guide repair procedures and below is the log data
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 445 mV
CMD Active Level: 1192 mV
EMMC Device Information :
EMMC CID: 150100424A5444345200523F424BB5A7
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: BJTD4R , HEX: 424A544434xx , S/N: 523F42xx , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 11/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: BJTD4R_523F424B_20210404_201644.extcsd
EMMC Init completed.
Scanning soft partitions
Partition table not found
Get firmware version
Firmware info not found
NOTE: I HAVE THE BACK UP FILE BUT I DO NOT KNOW WHICH FILES TO LOAD , MAY SOMEONE CHECK THE ATTACHMENT AND TELL ME WHICH FILES TO LOAD LIKE (Select eMMC Image file *.bin) from THIS BACK UP.MAY SOMEONE TELL ME FROM THE BACK UP WHICH ONE IS ( eMMC ROM1 Image file, eMMC ROM2 Image file, eMMC ROM3 Image file, eMMC GP1 Image file, eMMC ExtCSD file. IN THEIR ORDER.
gruka said:
Hello i have A8 2018 sm-a530f which has the emmc files corrupted , i need to revive and when i connect to the Easy Jtag Plus i get the error Partition info not found ,guide repair procedures and below is the log data
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 445 mV
CMD Active Level: 1192 mV
EMMC Device Information :
EMMC CID: 150100424A5444345200523F424BB5A7
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: BJTD4R , HEX: 424A544434xx , S/N: 523F42xx , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 11/2018
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x01 , width 4bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: BJTD4R_523F424B_20210404_201644.extcsd
EMMC Init completed.
Scanning soft partitions
Partition table not found
Get firmware version
Firmware info not found
NOTE: I HAVE THE BACK UP FILE BUT I DO NOT KNOW WHICH FILES TO LOAD , MAY SOMEONE CHECK THE ATTACHMENT AND TELL ME WHICH FILES TO LOAD LIKE (Select eMMC Image file *.bin) from THIS BACK UP.MAY SOMEONE TELL ME FROM THE BACK UP WHICH ONE IS ( eMMC ROM1 Image file, eMMC ROM2 Image file, eMMC ROM3 Image file, eMMC GP1 Image file, eMMC ExtCSD file. IN THEIR ORDER.
Click to expand...
Click to collapse
I think there are not many users who are able to help in your case.
I only found this thread about emmc repair for your device:
Samsung A520f ,A530f Dead boot repair direct emmc file download
gsm flash,gsm flash file,gsm crack,combine file,easy firmware,frp file,gsm firmware,gsm file,samsung firmware,samsung dump,all android flashing tool,
www.awaismobile.com
Yes i downloaded the file ,how do i know this file is rom 1 ,Rom2,Rom 3, and ex PLEASE I DENTIFY FOR ME