Hello,
I brick my Erisin unit, so I want to buy new PX5 core board, or used but fine working.
If downgrade is possible, you can offer me for PX 3 board to.
Parameters are not so inportant, 2GB or 4GB RAM, 16GB or 32GB ROM are acceptable.
Android version in not so important too. No mather brand name, only to be compatible.
I only want to return to life my device.
I am from Bulgaria, Europe Union.
i have a px3 (16+1) Android 5.1 if you are interested
i have a 2gb px3 with 16gb rom and 7.1 on it
Skruji said:
Hello,
I brick my Erisin unit, so I want to buy new PX5 core board, or used but fine working.
If downgrade is possible, you can offer me for PX 3 board to.
Parameters are not so inportant, 2GB or 4GB RAM, 16GB or 32GB ROM are acceptable.
Android version in not so important too. No mather brand name, only to be compatible.
I only want to return to life my device.
I am from Bulgaria, Europe Union.
Click to expand...
Click to collapse
Hello,
I sell a board that mount a PX5 with 2 GB of memory and 32 Gb of ROM space. The cards are from Dasaita / HotAudio.
I live in Italy.
If you are interested, write me a message
Bye!!
I ordered new PX5 board, directlly from Erisin. Thank you, the thread can be closed.
You can buy PX3 or PX5 boards on Aliexpress.com
px3
macoloco said:
i have a px3 (16+1) Android 5.1 if you are interested
Click to expand...
Click to collapse
Hello I am interreser by px3, I have a car radio Erisin, it is available and functional and you will be ready to send me by the post office for mauritius and I pay you by paypal
---------- Post added at 05:16 AM ---------- Previous post was at 04:54 AM ----------
sev said:
i have a 2gb px3 with 16gb rom and 7.1 on it
Click to expand...
Click to collapse
I am interreser by px3, I have a car radio Erisin, it is available and functional and you will be ready to send me by the post office for mauritius and I pay you by paypal
schriss said:
You can buy PX3 or PX5 boards on Aliexpress.com
Click to expand...
Click to collapse
https://www.aliexpress.com/item/32814725689.html
Is there a way to know for sure this will work in my Xtrons android px5 unit?
Hey did somone still have for sale px3 or px5 boards? I dont know whats the "company name" is my radio but I know thats my px3 coreboard is HCT and also my main board is XRC and supporting both PX3 and PX5 coreboards. I was text to appollo but maby someone else have? My one is bootlooping on android logo. I think my nand flash is die couse OTG flashing by MarskRom is passing 100% but still bootlooping and offing itself ( on laboratory power supply amps going to 0.02amp and need to press reset to boot again and jumping to 0.8amp) so mainly coreboard is die...
Sidoreczek 437 said:
Hey did somone still have for sale px3 or px5 boards? I dont know whats the "company name" is my radio but I know thats my px3 coreboard is HCT and also my main board is XRC and supporting both PX3 and PX5 coreboards. I was text to appollo but maby someone else have? My one is bootlooping on android logo. I think my nand flash is die couse OTG flashing by MarskRom is passing 100% but still bootlooping and offing itself ( on laboratory power supply amps going to 0.02amp and need to press reset to boot again and jumping to 0.8amp) so mainly coreboard is die...
Click to expand...
Click to collapse
OTG Format storage first
Mean Erase whole nand first? Then install rom?
Sidoreczek 437 said:
Mean Erase whole nand first? Then install rom?
Click to expand...
Click to collapse
Yes
Related
I have a MTCD unit from Erisin, info in attached pic.
I see threads like this one Factory firmware for RK3188 MTCD
with links to firmware, can I use these?
How do I identify which firmwares I can use.
What do the letters after the MTCD mean in the MCU version, my letters are "LM"
kind regards
You can flash any LM update
Sent from my SM-N920C using XDA-Developers mobile app
I was told you can flash any mtcd firmware, just don't flash the MCU if it's not for your version. But I haven't dare try it yet.
same question
I have model A7533, which ROM i can use?
vboiko said:
I have model A7533, which ROM i can use?
Click to expand...
Click to collapse
Do not use the ROM from here.. that is not mtcD head unit
Hello,
I have PX3 unit with MTCD_MX_v2. 56b Fw - and my question is, can I use MCU update from the PX5 versions which is 2.9 sth?
najcik123 said:
Hello,
I have PX3 unit with MTCD_MX_v2. 56b Fw - and my question is, can I use MCU update from the PX5 versions which is 2.9 sth?
Click to expand...
Click to collapse
MCU and PX3/5 are two different systems. You can only use MX MCU with the MCU, but you can flash the PX3 board with any ROM you like provided it's for your resolution and you have enough RAM, especially for ROMs based on Android 7/8. As far as I'm aware only upgrade to Android 7 if your PX3 has 2GB of RAM and Android 8 is only for PX5 units.
Plenty of custom ROMs for PX3 such as the Hal9k and Malaysk. Or you can always flash a PX3 ROM from another manufacturer, results may vary though.
stefcio007 said:
MCU and PX3/5 are two different systems. You can only use MX MCU with the MCU, but you can flash the PX3 board with any ROM you like provided it's for your resolution and you have enough RAM, especially for ROMs based on Android 7/8. As far as I'm aware only upgrade to Android 7 if your PX3 has 2GB of RAM and Android 8 is only for PX5 units.
Plenty of custom ROMs for PX3 such as the Hal9k and Malaysk. Or you can always flash a PX3 ROM from another manufacturer, results may vary though.
Click to expand...
Click to collapse
Well. the model is PX3 meaning if I'm correct 4 cors, PX5 has 8? Sth like that. And the MCU version is MTCD_MX_xxxx. So From what U wrote, I can safely update that MX which came from PX5 modles?
Another one - If I use any custom ROM, does it also updates the MCU version? Or that is separate stuff?
Thanks for help!
Up
najcik123 said:
Up
Click to expand...
Click to collapse
Don't
najcik123 said:
Well. the model is PX3 meaning if I'm correct 4 cors, PX5 has 8? Sth like that. And the MCU version is MTCD_MX_xxxx. So From what U wrote, I can safely update that MX which came from PX5 modles?
Another one - If I use any custom ROM, does it also updates the MCU version? Or that is separate stuff?
Thanks for help!
Click to expand...
Click to collapse
PX3 is 4 core, PX5 is 8 core.
PX3 comes with either 1GB or 2GB of RAM. 5.1.1 runs fine with only 1GB of RAM. 7.1 should have at least 2GB of RAM.
PX5 comes with either 2GB or 4GB of RAM. They have been only 6.0 but 8.0 is now out for them, 2GB of RAM should be enough for 8.0.
MCU is a separate update file to the ROM. The ROM contains Android and the UI you see. The MCU is specific to the board in your radio and requires the correct file such as KGL, GS, MX. Some are interchangeable but it is strongly advised against using other MCUs unless you already have an issue with your current one that isn't resolved by the latest version.
Hi there,
did someone tryed to install a Joying Rom on a PX5 non Joying Radio.
I have a KGL PX5 Radio (MTCE) and I like to try it out.
Im right now on the Xtron Rom 8.0
For a feedback Ill be thankfull
EagleSoldier said:
Hi there,
did someone tryed to install a Joying Rom on a PX5 non Joying Radio.
I have a KGL PX5 Radio (MTCE) and I like to try it out.
Im right now on the Xtron Rom 8.0
For a feedback Ill be thankfull
Click to expand...
Click to collapse
Did you already tried it?
If a Joying Rom would work, I don't know. If it comes from a MTCD/MTCE Headunit it could work.
I have a KGL Headunit and I am on the latest Dasaita HA Rom from 11.06.2018 and I must say that this Rom is the best for me.
I want to try Xtrons next but I think it will not happen because I am very happy with the HA Rom.
maus05 said:
If a Joying Rom would work, I don't know. If it comes from a MTCD/MTCE Headunit it could work.
I have a KGL Headunit and I am on the latest Dasaita HA Rom from 11.06.2018 and I must say that this Rom is the best for me.
I want to try Xtrons next but I think it will not happen because I am very happy with the HA Rom.
Click to expand...
Click to collapse
I have a xtrons but i want the video out optioneel like joying. Of Amy other rom with the option to show YouTube on the headrests
Is that working on the rom you use?
Johan
I never tried.
For me was important a good Sound, a good working GPS and a stable dashcam.
I tried the following roms:
Malaysk Android 6
Stock KGL Android 6
Malaysk Oreo
Stock KGL Oreo
Stock HA Oreo and that fits all I need
did you do this in the end?
I have MTCE_LM_2.88.
I have already upgraded MCU to MTCE_HA_2.99 seems to have fixed Reverse Camera problem.
I want to know if it is safe to use the Stock HA OTA rom from 12/18 to replace stock LM 07/18
Is it simply, just put update.zip in?
Hi there,
attached is a new MCU v 2.95 which I found at 4PDA.
It is a HA-MCU.
I succesfully flashed it on a Witson unit (MX2) and unlocked the MCU afterwards.
All settings working fine for me.
I found a new setting to display battery voltage is the status bar.
BR
Christian
Can I try such an HA MCU IMG on a LM PX5 unit or can this brick my LM PX5?
iwl said:
Can I try such an HA MCU IMG on a LM PX5 unit or can this brick my LM PX5?
Click to expand...
Click to collapse
You should have a copy of your current MCU to be sure.
I didn't have one so I just tried at own risk.
Important is to first install the mcu unlocker app, than save the dmcu settings (I additionally made photos of all settings).
Then flash the mcu, do unlock and set your settings back.
I manually changes all settings. Was also fairly quick job.
I can't promise that it won't brick. So if your system runs fine, I would not suggest flashing as long as no one confirmed compability.
lets say I am 95% sure, it should work, as most other users suceeded also with changing mcu. Finally its up to you.
BR
Christian
I have tried and can download all kind of LM MCU versions for my LM PX5 - no problem.
I think I wait for some more opinions / experiences if MCU images of different PX5 unit vendors can just be used on every PX5 unit, or at least don't brick the device so I can change MCU back.
gforums said:
Hi there,
attached is a new MCU v 2.95 which I found at 4PDA.
It is a HA-MCU.
I succesfully flashed it on a Witson unit (MX2) and unlocked the MCU afterwards.
All settings working fine for me.
I found a new setting to display battery voltage is the status bar.
BR
Christian
Click to expand...
Click to collapse
MTCE_MX_V2.96 and MTCE_MX2_V2.96
https://forum.xda-developers.com/showpost.php?p=78158956&postcount=1395
iwl said:
Can I try such an HA MCU IMG on a LM PX5 unit or can this brick my LM PX5?
Click to expand...
Click to collapse
Refer MCU cross compatability thread.
OP can you give some more info and link for mcu unlocker app please?
Hi Im have problem with own 2din android radio. Android 8.0
Dont know what MCU get.
Model : XRC7117XPB (info from auction)
Procesor: Rockchip PX5, Octa core Cortex-A53 1.5
PowerVR G6110 GPU
Oryginal Im have problem with Wi-Fi, mostly frozen and dont work. Im write to seller and Im get update MCU - MTCE_XRC_V2.94.
After it radio completly mess. Version unmached, BT dont work and physical button in radio and on wheel dont work too.
Seller answer checking problem but for few days Im havent answer. Of course before update Im dont check version MCU, dont know about it. Now I read and learn.
Im check few MCU and found HA version work without version unmached. Im update with MTCE_HA_V3.40. Still mostly function dont work only bluetooth I run.
I need any suggestion what can back my radio to work.
FallenReb said:
Hi Im have problem with own 2din android radio. Android 8.0
Dont know what MCU get.
Model : XRC7117XPB (info from auction)
Procesor: Rockchip PX5, Octa core Cortex-A53 1.5
PowerVR G6110 GPU
Oryginal Im have problem with Wi-Fi, mostly frozen and dont work. Im write to seller and Im get update MCU - MTCE_XRC_V2.94.
After it radio completly mess. Version unmached, BT dont work and physical button in radio and on wheel dont work too.
Seller answer checking problem but for few days Im havent answer. Of course before update Im dont check version MCU, dont know about it. Now I read and learn.
Im check few MCU and found HA version work without version unmached. Im update with MTCE_HA_V3.40. Still mostly function dont work only bluetooth I run.
I need any suggestion what can back my radio to work.
Click to expand...
Click to collapse
You just lost the proper settings on factory settings
..you must figure out which settings are the correct ones by trial and error or ask for someone with the same car model and canbus
Enviado desde mi SM-G975F mediante Tapatalk
Hello. I am using mtcd px3 Peugeot 301 multimedia. Canbus simple soft Xp version psa V2 27. I want to upgrade canbus version. I want to make V2 28. How can I do that? How can I find the upgrade file?
What does seller suggest?
marchnz said:
What does seller suggest?
Click to expand...
Click to collapse
Seller suggest me not update for this product