Hello Everyone,
I got an Honor 8 -L09 running on the official EMUI8 release (FRD-L09-8.0.0.521(C432)) and installed TWRP and Magisk 16
I tried the custom Magisk from ******. .com/install-magisk-on-emui-8-0-android-8-0/ as well as the official 16.0 and 16.7.
Did anyone get SafetyNet working with EMUI8 stock rom and Magisk ? I tried numerous combinations and setups and never got it to work.
I also tried to "enable USB debugging", what some people recommended. But that does not help either.
Any hints on what I could do here ?
best regards
L.
Larvitz said:
Hello Everyone,
I got an Honor 8 -L09 running on the official EMUI8 release (FRD-L09-8.0.0.521(C432)) and installed TWRP and Magisk 16
I tried the custom Magisk from ******. .com/install-magisk-on-emui-8-0-android-8-0/ as well as the official 16.0 and 16.7.
Did anyone get SafetyNet working with EMUI8 stock rom and Magisk ? I tried numerous combinations and setups and never got it to work.
I also tried to "enable USB debugging", what some people recommended. But that does not help either.
Any hints on what I could do here ?
best regards
L.
Click to expand...
Click to collapse
Old safetynet doesn't work. You have to expect @topjohnwu will update that.
Related
I'm currently running NanoRom on my S6 - but as it's pre rooted and running Magisk 12 it fails safetynet check.
I'm looking for a ROM that's running marshmallow but before march security update and one that passes safetynet.
Looking to be able to play Pokémon Go and be able to hide root but after ROM suggestions...
Thanks
MartinEv1980 said:
I'm currently running NanoRom on my S6 - but as it's pre rooted and running Magisk 12 it fails safetynet check.
I'm looking for a ROM that's running marshmallow but before march security update and one that passes safetynet.
Looking to be able to play Pokémon Go and be able to hide root but after ROM suggestions...
Thanks
Click to expand...
Click to collapse
Try this module, either flash through TWRP or add the module in magisk.
If you've added through magisk make sure to reboot phone.
Unfortunately not working...
MartinEv1980 said:
Unfortunately not working...
Click to expand...
Click to collapse
Must be a Rom related issue then, I'm on odexlite Rom, magisk 12 and using the module I linked and I pass fine.
You can try at Beta version -> forum.xda-developers.com/showpost.php?p=72797255&postcount=1890 (from "h1nnak" 's posts)
Hello,
I tried to update to Magisk V15 today but got bootloop
So I uninstall ofc, I tried the 14.6 but still bootloop
Yesterday it worked fine but I dunno what version I was using (I thought it was v14.6)
What version do you use guys ?
I got an Honor 8 on B394
EDIT: It looks like people can't install last version on multiple phone
Btw I flashed V14.0 and it's worked
Thanks
I have the same problem dude... I will try to flash RROS...
DrazYs said:
I have the same problem dude... I will try to flash RROS...
Click to expand...
Click to collapse
I'm actually seeing tons of topics with same problems with the new update
Btw I flashed V14.0 and it's worked
me too but i success with this type
1 Magisk-uninstaller-2017 12 26
2 Magisk-uninstaller-2017 09 28
3 Magisk-v14.0
Good luck !!!
ok thanks... I was made a factory reset
warindo said:
me too but i success with this type
1 Magisk-uninstaller-2017 12 26
2 Magisk-uninstaller-2017 09 28
3 Magisk-v14.0
Good luck !!!
Click to expand...
Click to collapse
in my case it doesn't help. but i have an old backup so i restored only boot image from it and phone boot fine after this. and then i reinstall Magisk v14.0 and everything work like before.
Anyone have tried the new v15.1?
If I check the V15.0 I got a bootloop, but now I'm using V15.0 without problems on a Honor 8.
The install method is:
1. V14.0 installed
2. Install new Magisk Manager 5.5.x
3. Install Magisk V15.x from Magisk Manager, but check "Preserve force encryption" and check "Preserve AVB 2.0/dm-verify" options and use "direct install" method.
Its working also with Magisk Manhager 5.5.2 and Magisk V15.1
Honor 8 (FRD-L09 with B399 firmware)
Mumtaz77 said:
If I check the V15.0 I got a bootloop, but now I'm using V15.0 without problems on a Honor 8.
The install method is:
1. V14.0 installed
2. Install new Magisk Manager 5.5.x
3. Install Magisk V15.x from Magisk Manager, but check "Preserve force encryption" and check "Preserve AVB 2.0/dm-verify" options and use "direct install" method.
Its working also with Magisk Manhager 5.5.2 and Magisk V15.1
Honor 8 (FRD-L09 with B399 firmware)
Click to expand...
Click to collapse
WOW! Thanks!!!!
So I just updated my pixel to Android 10. And besides the issue with getting TWRP to work, I've been trying, and failing, to get Magisk installed.
I havn't tried the newer Magisk beta yet. Does anyone know if this would work instead?
Thanks
it works with me with the latest TWRP and Magisk
henk-jan said:
it works with me with the latest TWRP and Magisk
Click to expand...
Click to collapse
Okay, so with TWRP 3.3.0 with the no-pin workaround, I wasn't able to install magisk 19.3. However, I was able to get the Beta 19.4 to work.
I was trying to root several roms for hours! with latest TWRP version, no matter wich method I used, the result was always a non-rooted device.
After too much hours, I decided to go back to TWRP 3.1.1-0, and it rooted my phone at once (MIUI v11 Android 10.0).
SO, dont try to root anything with latest TWRP because it simply doesnt work to root.
(apparently wasnt working due to Multirom, I have to do some tests)
I hope this help some guy wich is going crazy trying to root Android 10 (or older).
Magisk 20.0 with twrp 3.3.1-1 worked perfectly fine for me. I did it on xiaomi.eu miui11 - android 10.
malimukk said:
Magisk 20.0 with twrp 3.3.1-1 worked perfectly fine for me. I did it on xiaomi.eu miui11 - android 10.
Click to expand...
Click to collapse
Hmmm... No way for me ?
Worked as always for me. Used the official version from the homepage and flashed magisk version 20 with it.
No problems so far, everything works fine. Safety net passes also.
Did you get any error messages when flashing?
kleinholzinferno said:
Did you get any error messages when flashing?
Click to expand...
Click to collapse
No, the process ends without any error, but Magisk Mgr doesnt detects to be rooted.
Maybe was a multirom error (as primary rom) but have so do some tests .
Had anyone tried Magisk 20.2 and manager 7.5.0?
Is it bootloop free with OS 10?
I updated to the canary release through TWRP and I've been good. I'd expect you won't boot loop, but do a backup first if you can.
I updated thru mm ( after updating mm thru mm) and installed the recommended way in app. No issues.
LG G6 Pie
just updated to M 20.2 my LG G6 H870 Pie thru mm and got into bootloop. no way out and reset phone with LG Bridge (LGup not working for me since 9.0) without data loss. tried again from twrp and bootloop again. now flashing last 20.1 and won't install till next update.
I have latest Magisk Canary & Magisk Manager Canary from today, 02.01.2020. Working fine.
Did the Direct Install and all up to date! ?
I have OP6T with Android 10 AND recently updated to magisk 20.2 and Is working fine for me
Modules don't work in Magisk 20.2. They get installed but they don't take effect. I have to go back to Magisk version 20.1.
bjm51591 said:
Modules don't work in Magisk 20.2. They get installed but they don't take effect. I have to go back to Magisk version 20.1.
Click to expand...
Click to collapse
They work fine for me.
No problems here
fix Magisk 20.3
charliezulu said:
just updated to M 20.2 my LG G6 H870 Pie thru mm and got into bootloop. no way out and reset phone with LG Bridge (LGup not working for me since 9.0) without data loss. tried again from twrp and bootloop again. now flashing last 20.1 and won't install till next update.
Click to expand...
Click to collapse
Hi, just installed 20.3 and all is working; reading the log, problems for 20.2 were known with LG.
All is ok!
20.3 everything work fine!
Hi to everyone I'm on magisk 20.1, can I update directly to magisk 20.3 via magisk manager or before I've to uninstall some modules (maybe oos native call) like rom update?
giacomowrc said:
Hi to everyone I'm on magisk 20.1, can I update directly to magisk 20.3 via magisk manager or before I've to uninstall some modules (maybe oos native call) like rom update?
Click to expand...
Click to collapse
I've never had to uninstall modules to update Magisk (I have Swift Installer and xXx modules). Just update the manager app and do direct install of the update.