Hi there,
apparently I screwed something up while trying to prepare my 6X for Lineage
I did the OEM unlock but FRP Lock is still active and somehow this prevents me from doing anything else.
The combination of problems seems quite special, I've found (and tried) a lots of tipps for softbricked devices here but unfortunately none of them worked for me.
When restarting I get the warning that the device is not secure and will boot now - however it is stuck on "booting now" until the battery is drained.
It starts into Android when charged again but on every restart it will be stuck again.
When in "booting now" only Vol- key combination works when connected via USB to a PC. All other combinations (Vol+ , Power and Vol+/-) have no effect. Doesn't matter if connected to PC or not.
I can only get into fastboot, however I can't flash images (remote command not allowed), seems to be because of FRP lock.
The device is recognized (fastboot devices) and HiSuite sees it too. Drivers are OK IMHO.
Simply locking it again is not possible, the fastboot lock/unlock options don't work and when booted OEM unlock is greyed out in the options.
dload method is not available, because I can't get into erecovery since the key combination doesn't work.
I also tried factory reset, but:
doing it in the options doesn't work - it reboots and is then stuck in booting. After charging it everything is still there, so no reset at all.
doing it with *#*# 2846579#*#* doesn't work - says can't do it because I have a google account. Removed the device from my account, message remains.
erecovery is not available, can't get in the menue
Any help is greatly appreciated, I would be very happy to just restore it to default settings.
Cheers
Did you removed your screen lock password before unlocking bootloader?
yes, i did. At the moment I don't have a screen lock pw set. Should I set one?
Maybe you need to use dc unlocker
hm, not sure. I got the unlock code from Huwai and it worked. I read up on dc unlocker, how do you think it could help?
G4711 said:
hm, not sure. I got the unlock code from Huwai and it worked. I read up on dc unlocker, how do you think it could help?
Click to expand...
Click to collapse
Look into DC unlocked Phoenix. It can write to the phone in fastboot mode if the bootloader and frp is locked. I used it and it worked... Cost 20 dollars not better than buying a new phone
Thanks, will try it in the next days and post my results.
Related
Because i rooted all my phones so far, i also want to root my new Huawei Mate 9 to get all advantages and full access.
But how can i unlock my bootloader without requesting an unlock-code from Huawei and being on a black-list?
Is there a way to get rid of this?
Do one of these three solutions wok for Mate 9?
https://translate.google.com/transl...k-fuer-alle-huawei-phones/&edit-text=&act=url
http://actualizatumovil.com/Temas-Bootloader-unlock-without-emailing-Huawei
https://forum.xda-developers.com/showthread.php?t=2290610
Thank you for your answers in advance,
Florian
--- EDIT ---
Solved!
My tutorial for unlocking, installing TWRP and rooting Huawei Mate 9 at Post #13
Use dc-unlocker, but you have to pay, usually around 4-6 USD.
https://www.dc-unlocker.com/supported_models_1/huawei_phones
Hi azukayx,
thank you for your answer!
azukayx said:
Use dc-unlocker, but you have to pay, usually around 4-6 USD.
https://www.dc-unlocker.com/supported_models_1/huawei_phones
Click to expand...
Click to collapse
This method is working securly?
My Build-Number is "MHA-L09C432..." but here it says only MHA-L09B, it could work still?
And only read bootloader code is available: is that the code i am normally getting from Huawei? Or what is that?
Thank you for your answer in advance,
Florian
htcdesire-hd said:
Hi azukayx,
This method is working securly?
My Build-Number is "MHA-L09C432..." but here it says only MHA-L09B, it could work still?
And only read bootloader code is available: is that the code i am normally getting from Huawei? Or what is that?
Florian
Click to expand...
Click to collapse
Not sure, you can always shoot them an email asking or use their chat when they are online. There may be other unlocking services floating around, you may have to google them.
Need help to relock bootloader stock mate 9 usa
I have the mate 9 USA version bought it with unlocked bootloader and some programs are missing like the software update setting is gone, file manager etc. Please I need help going back to stock and relocking bootloader. :
azukayx said:
Not sure, you can always shoot them an email asking or use their chat when they are online. There may be other unlocking services floating around, you may have to google them.
Click to expand...
Click to collapse
Thank you i will try this and contact the support before...
Is there also a unlocking method without Huawei?
azukayx said:
Use dc-unlocker, but you have to pay, usually around 4-6 USD.
https://www.dc-unlocker.com/supported_models_1/huawei_phones
Click to expand...
Click to collapse
Thats the service i used to unlock my phone.
htcdesire-hd said:
Hi azukayx,
thank you for your answer!
This method is working securly?
My Build-Number is "MHA-L09C432..." but here it says only MHA-L09B, it could work still?
And only read bootloader code is available: is that the code i am normally getting from Huawei? Or what is that?
Thank you for your answer in advance,
Florian
Click to expand...
Click to collapse
Read bootloadercode is fine, save it in a textfile and use fastboot oem unlock xxxx (where xxxx is your bootloader unlock code) be sure usb debugging and oem unlock are activated before using fastboot
After downloading the DC Android app and investing about 4€, the bootloader could be unlocled without problems and without Huawei!
But resetting phone (after Bootloader unlocking) failed and EMUI is not loading any more...
I try to flash the original firmware and hope to solve this problem with that... Downloading EMUI via eRecovery also failed because of verification problems...
htcdesire-hd said:
But resetting phone (after Bootloader unlocking) failed and EMUI is not loading any more...
I try to flash the original firmware and hope to solve this problem with that... Downloading EMUI via eRecovery also failed because of verification problems...
Click to expand...
Click to collapse
If you're still stuck try Funkyhuawey.
htcdesire-hd said:
After downloading the DC Android app and investing about 4€, the bootloader could be unlocled without problems and without Huawei!
But resetting phone (after Bootloader unlocking) failed and EMUI is not loading any more...
I try to flash the original firmware and hope to solve this problem with that... Downloading EMUI via eRecovery also failed because of verification problems...
Click to expand...
Click to collapse
Try to do factory reset again from stock recovery,and wipe cache.
Hold volume up + power till you see the logo and release power while keeping volume up.
By the way i hate dc unlocker,more problems than fixing lol
gm007 said:
Try to do factory reset again from stock recovery,and wipe cache.
Hold volume up + power till you see the logo and release power while keeping volume up.
By the way i hate dc unlocker,more problems than fixing lol
Click to expand...
Click to collapse
I solved the Problem!
I only had to re-lock and then unlock my bootloader again via fastboot and it's working now!
But there are other problems:
When i activate developer options and try to open it, the settings are always crashing...
The same happens when i try to make a factory reset within the storage settings...
When i connect my phone to a PC while in TWRP, there are only some folders with cryptic numbers and i am not able to copy files to my phone (like superuser)...
What can cause this strange behavior?
And why is there no HiCare App and no update menu available? How can that be reactivated?
Problems solved using FunkyHuawei!
Now everything seems to work correctly (except of backing up via TWRP)...
For others who have the same problems with rooting their Huawei Mate 9, here is a little Tutorial:
How to unlock the bootloader without Huawei
download and install "DC Huawei Bootloader Codes" (from dc-unlocker) from playstore
open the app and klick on "DC-unlocker account"
pay the about 4€ via playstore (username and password is sent via email to the given address)
download and run the DC-Unlocker client (from dc-unlocker.com)
follow instructions from website (https://www.dc-unlocker.com/huawei-id-unlock)
unlock-code should be shown after following all instructions
shutdown phone
hold volume-down-key and connect the phone via USB to a PC (release key when bootloader appears)
run fastboot-command "fastboot oem unlock xxxxxxxxxxx" (x = your unlock code)
confirm message on screen
system performs factory reset
bootloader should now be unlocked! (can be seen in bootloader)
if something not working try to lock ("fastboot oem relock xxxxxxxxxxx") and unlock the bootloader again
or do a factory reset and wipe cache via recovery
if nothing solves the problem buy a FunkyHuawei account (15$/month) and make a clean re-installation of the firmware like discribed there (https://funkyhuawei.club/instructions)
How to install TWRP recovery
shutdown phone
hold volume-down-key and connect the phone via USB to a PC (release key when bootloader appears)
flash recovery via fastboot (recovery should be in same folder as fastboot.exe) ("fastboot flash recovery twrp-xxx.img") (x = downloaded version)
type "fastboot reboot"
leave the USB cable connected to PC
when phone booted hold volume-up, volume-down and power key
release power key after vibration
release volume keys after Huawei-logo disappears
TWRP should start!
How to root phone
requirements: unlocked bootloader and TWRP recovery t3.0.2-2-hi3660 (from this thread: https://forum.xda-developers.com/mate-9/development/recovery-unofficial-twrp-huawei-mate-9-t3515617)
copy superuser-r275.zip to phone storage (download link also available in the thread mentioned above)
boot into TWRP recovery (connect the USB cable to PC -> hold volume-up, volume-down and power key -> release power key after vibration -> release volume keys after Huawei-logo disappears)
choose "install" and select the previous copied .zip-file
after installation reboot phone
install Superuser_2.0_Beta_9.apk (from here: https://forum.xda-developers.com/showpost.php?p=69224582&postcount=1896)
download "Root Checker" from play store
Root Checker should show root access!
Please cosider that i am not responsible for any damage on the device after using this tutorial
htcdesire-hd said:
Problems solved using FunkyHuawei!
Now everything seems to work correctly (except of backing up via TWRP)...
Click to expand...
Click to collapse
Is this method possible without involving FunkyHuawei?
Are there any problems with losing functionality after this is complete? Heard reports of the software update setting going away, file manager missing, themes not working, etc.
xfive420 said:
Is this method possible without involving FunkyHuawei?
Are there any problems with losing functionality after this is complete? Heard reports of the software update setting going away, file manager missing, themes not working, etc.
Click to expand...
Click to collapse
I don't think so, because i had to re-flash the whole firmware to cure the errors and i think, until now, there is no other method to flash a firmware without using the Huawei eRecovery (modified with FunkyHuawei)...
No, after the clean setup with FunkyHuawei everything works fine for me, without any errors! It works like before, allthough the Bootloader is unlocked and the phone is rooted
Hi all,
I bricked my device. I was doing a rollback from 380, the rollback package went fine than I used dload to install 131 , it went to 55% then an error occured - the phone was supposed to reboot but nothing happened. The phone does not respond to any combinations of buttons and I can't manage to wake it up in any way. Does anyone have this issue? Many thanks
me too, but after many methods i found the bootloader locked even if show unlocked, and i use "HCU Client" and spend 4$ to show me new bootloader unlock code ... and after that I unlocked bootloader and flash "Boot, Recovery, System, Cust"
But will I able to do anything / unlock the bootloader if the phone is not reacting to anything? It is not seen by the computer or does not wake up to any button combinations?
thedark1979 said:
me too, but after many methods i found the bootloader locked even if show unlocked, and i use "HCU Client" and spend 4$ to show me new bootloader unlock code ... and after that I unlocked bootloader and flash "Boot, Recovery, System, Cust"
Click to expand...
Click to collapse
HCU can't see my device unfortunately
Ok. My phone was repaired under warranty. They changed the motherboard as well as the screen. It went well after all...
Hey everyone,
I have an LG G5 and I'm trying to hardreset it. I can't turn it on because it always goes into "incompatible module" mode, telling me to change the battery. The power button also doesn't work anymore.
I have however managed to get it into fast boot mode. From there I tried to use
Code:
fastboot erase userdata
but it says that the bootloader is locked. I checked with LG and they said that my particular phone (from Australia) can't officially be unlocked.
Now I'm looking for a way to either unofficially unlock it or to wipe all data with fast boot without having to unlock it. I can't use adb because it somehow doesn't recognize my phone, fastboot does.
Thanks,
Josh
Dear friends,
I have LG Google Nexus 5 (Hammerhead D821(H) 32GB) model. Some days ago I tried to install Ubuntu Touch OS through UBports Software in my nexus 5 phone. But I forgot to enable USB Debugging first. So when I started the flash process and try to unlock bootloader, one time it show lock state unlocked. But In reality it was not unlocked. Because of this reason Ubuntu Touch OS installation is not completed and it corrupted my phone. Now I am unable to boot in android also. I also tried to re-flash my phone with Google Factory image but it was not completed because of my bootloader is locked. I don't know how i can unlock bootloader now. I used Wipe Data & Factory Reset option in Recovery Mode but it is also vain. Please help me how can I correct my phone.
Assuming you have adb/fastboot drivers correctly installed, you have to reboot to bootloader by pressing volume down + power and keeping them pressed until you see the bootloader screen. Then connect your phone to the PC and issue the following command from a command prompt:
fastboot oem unlock
Keep in mind that unlocking the bootloader will erase all your data, just like a factory reset, so backup everything first!
shivmahar said:
Dear friends,
I have LG Google Nexus 5 (Hammerhead D821(H) 32GB) model. Some days ago I tried to install Ubuntu Touch OS through UBports Software in my nexus 5 phone. But I forgot to enable USB Debugging first. So when I started the flash process and try to unlock bootloader, one time it show lock state unlocked. But In reality it was not unlocked. Because of this reason Ubuntu Touch OS installation is not completed and it corrupted my phone. Now I am unable to boot in android also. I also tried to re-flash my phone with Google Factory image but it was not completed because of my bootloader is locked. I don't know how i can unlock bootloader now. I used Wipe Data & Factory Reset option in Recovery Mode but it is also vain. Please help me how can I correct my phone.
Click to expand...
Click to collapse
perhaps it can help
https://forum.xda-developers.com/go...l-06-03-14-one-click-factory-restore-t2513937
shivmahar said:
Dear friends,
I have LG Google Nexus 5 (Hammerhead D821(H) 32GB) model. Some days ago I tried to install Ubuntu Touch OS through UBports Software in my nexus 5 phone. But I forgot to enable USB Debugging first. So when I started the flash process and try to unlock bootloader, one time it show lock state unlocked. But In reality it was not unlocked. Because of this reason Ubuntu Touch OS installation is not completed and it corrupted my phone. Now I am unable to boot in android also. I also tried to re-flash my phone with Google Factory image but it was not completed because of my bootloader is locked. I don't know how i can unlock bootloader now. I used Wipe Data & Factory Reset option in Recovery Mode but it is also vain. Please help me how can I correct my phone.
Click to expand...
Click to collapse
You can try with this toolkit http://www.wugfresh.com/nrt/
Surf the net in search of tutorial and info,there are also some videos on YouTube.
I already tried it but vain.
ilciumbia said:
Assuming you have adb/fastboot drivers correctly installed, you have to reboot to bootloader by pressing volume down + power and keeping them pressed until you see the bootloader screen. Then connect your phone to the PC and issue the following command from a command prompt:
fastboot oem unlock
Keep in mind that unlocking the bootloader will erase all your data, just like a factory reset, so backup everything first!
Click to expand...
Click to collapse
Dear Sir,
I tried to unlock bootloader with fastboot oem unlock command many times. When I used this command one time it shows unlocked but when I restarted bootloader it again shows locked.
Eh, this is not good. In my experience, this happens when the eMMC has gone bad, either faulty or write protected for some reason. I have investigated the issue and I have not found a solution yet... Even desoldering it and soldering it to a uSD custom PCB does not allow me to write to it... I am afraid you are stuck with a secretly bricked phone...
I don't know if you already tried all possible,just take a look at this thread.
https://forum.xda-developers.com/go...nexus-5-doesnt-boot-access-adb-t2521691/page3
Or even look at this,LG Flashtool.You don't need unlocked bootloader to flash.
https://forum.xda-developers.com/go...orial-how-to-flash-factory-images-lg-t2713833
The thread is quite old,but needed links are working correctly,i've just checked.
So, I have a really really odd situation. I have an MDM on my phone, MASS360. I typed in the phone's password wrong too many times, and it locked me out of the phone. The phone says to reach out to the IT Department to fix it. I reached out to the IT Department, but they weren't able to fix it. So I have a bit of a conundrum. OEM Unlock is off, and so is USB debugging. I cant unlock the phone to turn them on. I also can't factory reset (even from the recovery menu) because of the MDM's policy. Is there a way to Sideload a file or something to factory reset the phone? Any other ways that I can factory reset the phone? I'd also be fine with installing another ROM on the phone if its possible.
Phone info: Samsung Galaxy J327U
jordanbw1 said:
So, I have a really really odd situation. I have an MDM on my phone, MASS360. I typed in the phone's password wrong too many times, and it locked me out of the phone. The phone says to reach out to the IT Department to fix it. I reached out to the IT Department, but they weren't able to fix it. So I have a bit of a conundrum. OEM Unlock is off, and so is USB debugging. I cant unlock the phone to turn them on. I also can't factory reset (even from the recovery menu) because of the MDM's policy. Is there a way to Sideload a file or something to factory reset the phone? Any other ways that I can factory reset the phone? I'd also be fine with installing another ROM on the phone if its possible.
Phone info: Samsung Galaxy J327U
Click to expand...
Click to collapse
flash factory firmware in Odin
Youdoofus said:
flash factory firmware in Odin
Click to expand...
Click to collapse
Thanks so much! I didn't realize you could flash stock firmware without OEM unlock.
jordanbw1 said:
Thanks so much! I didn't realize you could flash stock firmware without OEM unlock.
Click to expand...
Click to collapse
you bet! Welcome to XDA btw!
I have almost exactly the same issue. I was tinkering with MDM 'force PIN' and then stupidly removed the device (Samsung SM -T505) from MDM (Scalefusion) before disabling the PIN lock. Now the PIN is not recognised, I can't get into the the home screen at all because of the PIN, the recovery menu is missing wipe data/factory reset and (of course) USB debugging is NOT enabled. If I try to flash a stock ROM, ODIN reports 'SetupConnection..' but eventually times out without sending anything. ADB devices list is empty. However, I can get into ADB sideload from the recovery menu and ADB devices (on the PC) then shows a device in sideload mode. I tried loading the Samsung stock ZIP, but the tablet reported signing errors and quit.
Is it possible to sideload a stock rom? Or a 'force factory reset' zip file of some sort? Or perhaps from SD card?Choosing the bootloader menu shows 'Fasboot Mode' in red with device state - locked (also in red.
I m not trying to crack an ebay cheepy or anything else (I have the receipt to prove purchase), but I REALLY need to get back into this darned thing! I suppose at least one can say that the Knox system works well!.
Any offerings, please?!!
/AJC