Database Info

Tempered glass that covers only the display?

Hi! I am searching for tempered glass screen protector that would cover only the display part (so I could also put a bling sticker on the phone haha). Thank you for suggestions!

notefreak said:
Hi! I am searching for tempered glass screen protector that would cover only the display part (so I could also put a bling sticker on the phone haha). Thank you for suggestions!
Click to expand...
Click to collapse
All the ones I've used cover the home and back buttons and even the LED. Are you looking for something that covers less than that?

trek7000 said:
All the ones I've used cover the home and back buttons and even the LED. Are you looking for something that covers less than that?
Click to expand...
Click to collapse
Yes, I would like one that only covers actual display part (the 5.7 inch diagonal rectangular part), no more:fingers-crossed: I think it is probably not possible :/

see I'm the total opposite, I can't find one that fits PERFECT and I usually go with BodyGuardz ( I really like the home button spacers and stuff they got nice kits) but ya anywho....so I tried two , one BGDz and the other generic , the generic was awful , the bodyguards was at least bit better fit. SO , what I did was bought a galaxy note 3 glass and it covers it edge to edge. the only issue is the edges could be tapered or rounded a bit but really I'm damn happy with it, total coverage for the full front, I hate cases but an otterbox / similar would have this thing fully encased and protected.

SuperlativeB said:
see I'm the total opposite, I can't find one that fits PERFECT and I usually go with BodyGuardz ( I really like the home button spacers and stuff they got nice kits) but ya anywho....so I tried two , one BGDz and the other generic , the generic was awful , the bodyguards was at least bit better fit. SO , what I did was bought a galaxy note 3 glass and it covers it edge to edge. the only issue is the edges could be tapered or rounded a bit but really I'm damn happy with it, total coverage for the full front, I hate cases but an otterbox / similar would have this thing fully encased and protected.
Click to expand...
Click to collapse
Wait a minute... $45?

sxg75 said:
Wait a minute... $45?
Click to expand...
Click to collapse
Ahhh 45 dollars ??

Best one I've found...
I have tried several tempered glass screen protectors on my Note 4. The best I have found are from Spigen. All of the other glass protectors usually left a slight gap on the edges where the display curves, but the Spigen slightly curves with the display and leaves no air gap. I have that in conjunction with the Versus Iron Shield cover; definitely a premium feel. You can get both for less than you just quoted ($45) on Amazon...

Most tempered glass screen protectors for the Note 4 are designed to just cover the display and not the whole front panel.

DarkGuyver said:
Most tempered glass screen protectors for the Note 4 are designed to just cover the display and not the whole front panel.
Click to expand...
Click to collapse
Most do not even cover the whole display, since there's a slight curve on the edges. I have a great tempered glass protector, and it is slightly narrower than the display. It doesn't bother me, since it works so well. S Pen glides so smoothly with it.

DaggettBeaver said:
Most do not even cover the whole display, since there's a slight curve on the edges. I have a great tempered glass protector, and it is slightly narrower than the display. It doesn't bother me, since it works so well. S Pen glides so smoothly with it.
Click to expand...
Click to collapse
I was referring to the AMOLED display and not the entire front panel. As you have mentioned before the entire front panel of the Note 4 is made of 2.5D glass.

ZigZiggo said:
I have tried several tempered glass screen protectors on my Note 4. The best I have found are from Spigen. All of the other glass protectors usually left a slight gap on the edges where the display curves, but the Spigen slightly curves with the display and leaves no air gap. I have that in conjunction with the Versus Iron Shield cover; definitely a premium feel. You can get both for less than you just quoted ($45) on Amazon...
Click to expand...
Click to collapse
I have a Spigen glass screen protector on my n910v. It is not curved so as to follow the screen, but has air under the outermost 2mm or so on the long sides.
Not questioning your post. They may have changed, and someone buying one based on your recommendation is IMO going to be disappointed.
Bright side: the surface is nice - nicer than the original glass (easier finger glide, pen glide and seems to be more oleophobic - guess I have greasy ears or something )

IMAK Glass screen protector

I just received my IMAK glass screen protector. Purchased this on AliExpress. Here are some photos of it and how I installed it. I used the 3 stickers to make a hinge after it's positioned correctly. That way I just have to remove the backing and then stick it. I'll just seperate my review into pros and cons.
Pros:
-The screen protector fits nicely. I chose this one because it has the little speaker cut out on top.
-It feels good because it is glass.
-It protects the screen well because it is glass.
Cons:
-It is glass so it has some thickness to it.
-Holds fingerprints more than screen itself
-It has a little orange peel so it's not crystal clear. You can see in the picture of the reflection of the light that it looks a little muddy instead of mirror like.
Overall, it's good for the price, but not perfect. Personally I'm back and forth between glass and film screen protectors. I'll give this a try for a few weeks and then make a final decision.
https://flic.kr/p/YVQY5o https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/YiqUeK https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/YiqRJz https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/ZgR8h3 https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/Zfqq6y https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/ZfqmJd https://www.flickr.com/photos/[email protected]/
https://flic.kr/p/YVQPHJ https://www.flickr.com/photos/[email protected]/

Those guiding stickers are ingenious, never seen them before and the idea is just so simple and clever!!
Perfect, I know what I have to do when my phone and Nillkin protector arrive.
Thanks for sharing.

That is a lot nicer than the Riffue Tempered Glass screen protector I bought on Amazon. This one is thin and has a good height but is several mm too narrow, it doesn't even cover the LCD display let alone the entire screen/glass.

the one i order covers like half of the screen lmao wtf
just ordered one like yours.

I had one similar too this, but the dust collected over front camera under the glass.
It has some glue on it, does this IMAK one used static?

Here is a link to the one i bought.
I tried many different ones but for me this is the best.
The coating is very good against fingerprints. It fits perfect on the screen.
The sides of the screen are a little bit curved down which is good for the dust.
Updated link https://www.aliexpress.com/item/Ima...lgo_pvid=6f18e507-ed27-486a-869e-418c35f3a452

dewingerd said:
Here is a link to the one i bought.
I tried many different ones but for me this is the best.
The coating is very good against fingerprints. It fits perfect on the screen.
The sides of the screen are a little bit curved down which is good for the dust.
https://www.aliexpress.com/snapshot/0.html?spm=a2g0s.9042647.0.0.JDCsAY&orderId=87369620878335&productId=32835736602
Click to expand...
Click to collapse
The link you've sent is private, I think we can't view it.

kurtextrem said:
The link you've sent is private, I think we can't view it.
Click to expand...
Click to collapse
Try this one : https://www.aliexpress.com/item/Ima...lgo_pvid=6f18e507-ed27-486a-869e-418c35f3a452

Do it sticks in all the area? or only in borders?
Thanks

DeividMS said:
Do it sticks in all the area? or only in borders?
Thanks
Click to expand...
Click to collapse
All the area.

Got the IMAK today and it is on and I LOVE it!!
Like there is no screenprotector there at all.
Will purchase some more rightaway.
EDIT: Never seen something fit so well!!

Dust2Dust said:
Got the IMAK today and it is on and I LOVE it!!
Like there is no screenprotector there at all.
Will purchase some more rightaway.
EDIT: Never seen something fit so well!!
Click to expand...
Click to collapse
I agree, this is the best screenprotector i have ever bought. It fits perfect and the coating feels the same as on the original screen :good::good:

Just wanted to echo everyone else about how great the Imak full coverage screen protector is. I went through four different screen protectors so far (unknown brand thin plastic one, MOFI tempered glass, another MOFI tempered glass, and finally the IMAK full coverage)
The thin plastic one came bundled with the phone and would scratch if you so much as raised your voice at it. Placed it on just as a temporary protector while waiting for the others to come from Aliexpress. It just barely covered the display and left about 1.5mm of space on the edges. The phone was accidentally smacked out of my hand once and landed on a sandy floor face down, which I later discovered upon removal of the screen protector had caused a small chip on the screen near the edge, so the protector might have absorbed some of the impact.
The first MOFI tempered glass I got was a "full coverage" one, but it arrived with notches cut out on the bottom where the proximity sensor and front camera are. The worst thing about this one was that it only had adhesive on the edges, so there was a really distracting and noticeable rainbow effect (newton rings) in the middle of the screen.
The second MOFI tempered glass was also full coverage, and this time it didn't have notches at the bottom, just a hole cutout where the proximity sensor is located. The adhesive type was the same as the previous one, edge only, resulting in the newton ring effect. It also mysteriously cracked for no reason.
The one I have on currently is the IMAK full coverage screen protector. Indisputably the best out of all of them, the protector fits exactly over the entire front glass, and instead of cutout holes at the bottom, the chin at the bottom is fully glass, blackened except for where the proximity sensor and front camera are. Full adhesive all throughout means there is no rainbow effect, and the LED notification light is even tinted slightly so that it blends in with the chin, and is invisible until it turns on! The only flaw about this screen protector (yes, there is one) is that the area underneath the front camera is too thin to apply adhesive, so as a result there's a tiny gap between the glass and phone that can let in dust after a while. The dust does not seem to affect the front camera, and I never take selfies anyway, but I have yet to figure out a good way to get the dust out of there.
I have never had a screen protector fit this perfectly, even for phones other than the Mi Mix 2. Most other screen protectors have cutouts for the proximity sensor/front camera/both, but this one blends in so well that it feels like it's not even there.

Does anyone know if this protector has a dot matrix on the screen (tiny dots that reflect)? I purchased a Misha 3D protector from Amazon which looks identical to this, and it's great except for the grid of dots across the screen.

dodgyc said:
Does anyone know if this protector has a dot matrix on the screen (tiny dots that reflect)? I purchased a Misha 3D protector from Amazon which looks identical to this, and it's great except for the grid of dots across the screen.
Click to expand...
Click to collapse
When I tried it there were no dots, just very reflective and had a weird smudge pattern going on which ruined it.
The flossmall one posted elsewhere is so much better.

Lol those kind of screen protectors damn sucks, they are not full glue, so that make lot of reflections. The nillkin (regular tempered glass, full glue, no black borders), is perfect and cover all the display... So why buy this imak piece of ****?

Zedramus said:
Just wanted to echo everyone else about how great the Imak full coverage screen protector is. I went through four different screen protectors so far (unknown brand thin plastic one, MOFI tempered glass, another MOFI tempered glass, and finally the IMAK full coverage)
The thin plastic one came bundled with the phone and would scratch if you so much as raised your voice at it. Placed it on just as a temporary protector while waiting for the others to come from Aliexpress. It just barely covered the display and left about 1.5mm of space on the edges. The phone was accidentally smacked out of my hand once and landed on a sandy floor face down, which I later discovered upon removal of the screen protector had caused a small chip on the screen near the edge, so the protector might have absorbed some of the impact.
The first MOFI tempered glass I got was a "full coverage" one, but it arrived with notches cut out on the bottom where the proximity sensor and front camera are. The worst thing about this one was that it only had adhesive on the edges, so there was a really distracting and noticeable rainbow effect (newton rings) in the middle of the screen.
The second MOFI tempered glass was also full coverage, and this time it didn't have notches at the bottom, just a hole cutout where the proximity sensor is located. The adhesive type was the same as the previous one, edge only, resulting in the newton ring effect. It also mysteriously cracked for no reason.
The one I have on currently is the IMAK full coverage screen protector. Indisputably the best out of all of them, the protector fits exactly over the entire front glass, and instead of cutout holes at the bottom, the chin at the bottom is fully glass, blackened except for where the proximity sensor and front camera are. Full adhesive all throughout means there is no rainbow effect, and the LED notification light is even tinted slightly so that it blends in with the chin, and is invisible until it turns on! The only flaw about this screen protector (yes, there is one) is that the area underneath the front camera is too thin to apply adhesive, so as a result there's a tiny gap between the glass and phone that can let in dust after a while. The dust does not seem to affect the front camera, and I never take selfies anyway, but I have yet to figure out a good way to get the dust out of there.
I have never had a screen protector fit this perfectly, even for phones other than the Mi Mix 2. Most other screen protectors have cutouts for the proximity sensor/front camera/both, but this one blends in so well that it feels like it's not even there.
Click to expand...
Click to collapse
After putting the screen protector on, I take a toothpick and put some glue from a Pritt-stick in the little gap underneath the camera. Not much, just enough to close the gap. When it has dried you can color it with a black whiteboard marker if you want. When you remove the screen protector you can easily rub it off. Works great for me :good:

Thanks!

Anyone tried these?
https://www.aliexpress.com/store/pr...Front-2PCS-Back-Soft/1879465_32831400367.html

Looking to buy this phone, any new news on protectors, or is IMAK our best option?
Thanks

Screen protector?

Has anyone purchased a tempered glass screen protector for this phone that they like?
Most of the ones I have looked at on amazon have complaints that they interfere with the fingerprint scanner or they have great reviews but aren't even available for another month. LOL.

FireRaider said:
Has anyone purchased a tempered glass screen protector for this phone that they like?
Most of the ones I have looked at on amazon have complaints that they interfere with the fingerprint scanner or they have great reviews but aren't even available for another month. LOL.
Click to expand...
Click to collapse
I m using trink(unbreakable ) bought from shop

I've always gone for a matte protector in the past but there were none on the market and I found myself enjoying the clarity of an unadulterated screen. So I decided to go for tempered glass and bought these
https://www.amazon.co.uk/gp/aw/d/B073T91BR7
Got two in a pack. Wasn't happy with the application of the first one I put on, so pulled it off and used the second one which I am 99% happy with. Small bubble on one extreme edge which really isn't a problem other than it triggers my OCD. In terms of the protector itself, it's a nice feel tempered glass affair and feels no different to the glass of the original screen. My one criticism is that it is slightly smaller than I think it needs to be. It covers the screen area - just. The cut outs at the top are odd (unless there's a sensor next to the front camera that I don't know about. Personally think they'd have been better off not bothering with the top cutouts and just making it a straight line underneath the earpiece. The cutout for the fingerprint sensor fits well. It actually adds height to the well in which the sensor fits, so it kind of guides your finger to the right location. I use the swipe navigation so I suppose time will tell whether it gets in the way on that front.
A 7 out of 10 for me.

I just installed iVoler on my wife's phone.
(https://www.amazon.fr/dp/B074MPC2G2/ref=cm_sw_r_cp_apap_vCJqUdNtCwZGC).
The top cutouts are weird... I messed up my first tgsp trying to align the flash cutout. Gratefully it was a 2-pack.
Managed to install it without any bubble and almost centered. She doesn't do selfies, so the front-facing flash is not important, and it still works well, it's just inelegant imo (cf. pictures)
Other than that it's a fingerprint magnet, it does not adhere well on the sides and on the top left corner, but it does the job ok for now.
I'll see if someone finds a better one and probably change it.
I don't recommend it

Loccy said:
I've always gone for a matte protector in the past but there were none on the market and I found myself enjoying the clarity of an unadulterated screen. So I decided to go for tempered glass and bought these
https://www.amazon.co.uk/gp/aw/d/B073T91BR7
Got two in a pack. Wasn't happy with the application of the first one I put on, so pulled it off and used the second one which I am 99% happy with. Small bubble on one extreme edge which really isn't a problem other than it triggers my OCD. In terms of the protector itself, it's a nice feel tempered glass affair and feels no different to the glass of the original screen. My one criticism is that it is slightly smaller than I think it needs to be. It covers the screen area - just. The cut outs at the top are odd (unless there's a sensor next to the front camera that I don't know about. Personally think they'd have been better off not bothering with the top cutouts and just making it a straight line underneath the earpiece. The cutout for the fingerprint sensor fits well. It actually adds height to the well in which the sensor fits, so it kind of guides your finger to the right location. I use the swipe navigation so I suppose time will tell whether it gets in the way on that front.
A 7 out of 10 for me.
Click to expand...
Click to collapse
Replying to myself here, but downgrading to a 2 out of 10. A few days in and I have a ding in the protector slap bang in the middle of the screen. Someone less OCD than I would probably put up with it but I don't think I can. My eyes keep getting drawn to it.

I have not tried any tempered glass protectors, but I did install these on both my and my wife's phone. It's pretty good, especially the clarity, it's somewhat okay in resisting fingerprints, but when the screen is on, it's hard to notice any fingerprint smudges. If you can't find a tempered glass protector you like, these will do nicely.
[8-Pack] Moto G5S Plus Screen Protector on Amazon

What you think about this, quality?
by dipos - Motorola Moto G5s Plus Screen Protector - 2x dipos Flexible Glass 9H Display Protection?

They're awful, tempered glasses don't go over to the edges because the screen is slightly curved, plus they get super sweaty, reflective and gross in general. Took off mine, won't recommend.
Sent from my Moto G5S Plus using XDA Labs

Use 5d glass buy from Amazon

iRaymee said:
I just installed iVoler on my wife's phone.
(https://www.amazon.fr/dp/B074MPC2G2/ref=cm_sw_r_cp_apap_vCJqUdNtCwZGC).
The top cutouts are weird... I messed up my first tgsp trying to align the flash cutout. Gratefully it was a 2-pack.
Managed to install it without any bubble and almost centered. She doesn't do selfies, so the front-facing flash is not important, and it still works well, it's just inelegant imo (cf. pictures)
Other than that it's a fingerprint magnet, it does not adhere well on the sides and on the top left corner, but it does the job ok for now.
I'll see if someone finds a better one and probably change it.
I don't recommend it
Click to expand...
Click to collapse
Wow, that one looks like it wasn't even made for your phone, the size is too small and the cutout is wrong - surely any model sold specifically for "G5S Plus" should be a better fit?

I bought the same one linked in the 3rd post, but I have NOT put it on yet. The biggest complaint people have with it is "does not go to the edge" . It is not supposed to!
I have the Spigen case with carbon fiber texture inserts. It wraps around the top edges of the g5s+. So a full front protector would either not let the case fit properly AND / OR would push up the edges of the screen protector.

Amazing Glass Screen Protector

So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.

Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd

Using one for one month, just perfect and easy to apply. Very good quality and i have tried many screen protectors for mix 2 but none was as good as this one.

Vin87 said:
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Click to expand...
Click to collapse
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!

jankes13 said:
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
Click to expand...
Click to collapse
it is compatible with mix 2 too. and it's amazing, best one i've had

kostekzg said:
it is compatible with mix 2 too. and it's amazing, best one i've had
Click to expand...
Click to collapse
GREAT! Thanks for answer!

Hey.
I use my phone since early 2018 now.
After a few different screen protectors i gave up and use it without protector.
The phone is like a new one. I think the glass is very good and no protector is needed.
The display is very smooth to tap without one scratch on it.
Use it with full cover/case with magnetic closer.

I managed to get some hair-like fine scratches. I think your full cover helps a lot

I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\

Just put mine on this morning, fits really well but 3 areas have a speck of dust under them, I put it on after getting out of the shower as the mist in the air normally keeps the dust away but not this time.
Got the esr case as well which is ok for the price.
Got them from the ESR store on AliExpress.
Sent from my Mi MIX 2 using Tapatalk

kostekzg said:
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Click to expand...
Click to collapse
Ruined 2 glass protector with that idiotic cut
Sent from my Mi MIX 2 using Tapatalk

Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.

Vin87 said:
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Click to expand...
Click to collapse
ESR? The one in the OP?

Miso122 said:
ESR? The one in the OP?
Click to expand...
Click to collapse
Yes the ESR from the Op. I got mine from AliExpress

Vin87 said:
Yes the ESR from the Op. I got mine from AliExpress
Click to expand...
Click to collapse
thanks, got mine on plane rn

crzykiller said:
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Click to expand...
Click to collapse
There is a white frame and black frame available. Which one did you choose? . . . and is there a case that would be most compatible with this rounded edge protector?

ESR
Well, ESR glasss has the best oleofobic coating and clearness. No rainbow efect too, it has gule on the whole surface. Just that nowel plastic frame needs some practice to get use to it. There are no gaps between it and the glass on all sides , when install. The glue is really strong. I am siprised that somebody managed to stisck something between glass and screen.

My ESR protector died after a couple months of use. First some scratches appeared (the protector is softer than the screen) and on one of those scratches (a deeper one on the edge) the protector cracked. Removal was not that easy as the force required to pull it of will result in a shattered protector everywhere so expect lots of glass dust. I've ordered a new one together with a ESR case (that fits lovely too). These things are so cheap anyway that I don't mind going through a couple of them each year.

Just got the ESR case and screen protector. Thanks for the recommendation, this screen protector feels and looks like there is no protector at all, no more smudges over the original screen. The perfect application from the bracket and adhesive across the entire protector makes it the best one I've used, after giving up on covering my mix 2 after 3-4 different protectors giving neuton rings and immediately thrown out. I have probably dropped my mix 2 on the pavement 7 or 8 times in the last year getting out of my car, and only got a tiny crack on the bottom bezel corner of the screen. Since the bottom bezel on the ESR protector is black my phone looks undamaged now.
The ESR case is nearly as good as the one in the box. I do notice it's slightly thicker than the case in the box, and the added bottom protection makes the phone slightly longer, but it's overall an exceptional fit.

I got mine from taobao directly.
https://detail.tmall.com/item.htm?id=544415913057&spm=a1z09.2.0.0.1be12e8dZtBmgW&_u=i23vb00o11c6
3-protector for 39 CNY, with a free silicon case (very ****ty).
This protector have soft edges to fit the curved screen edge, perfect for my case.

Need Nilkin 3D CP+ Max, SP Review.

Hey guys I'm planning to buy the Nilkin 3D CP+ screen protector for my OnePlus 6 and I am hoping those of you who are already using it will share your experience with me.
My first concern is regarding the black borders on the sides, how much screen area do they eat up? Also does the border on the notch, make it look thicker?
The official TG glass from OnePlus is really overpriced in my country, so I'm really hoping the Nilkin one can be the next best alternative. Tia.

The main problem for me of the nillkin was that the glass is very thin. It broke when I was trying to separate a little bit from the screen to adjust it better.
It fits properly and yes, it takes a little bit of the screen with the borders, but not as much as other screen protectors.
In my opinion, and it's based on my experience, the most balanced is the orzly. It's the most similar to the Oneplus official one of those that I've tried.

I've had this one but it broke on the sides. The edges float above the glass because the adhesive only covers the screen. Because the glass is thin these edges beak quite easily. I currently have the normal tempered glass H (not the h+) this glas doesn't cover the edges, but there are no black borders that cover any part of the display. I've had I'd on for about 3 months know and I'm really pleased with it. No bubble's no cracks and quite good oleophobic coating. Also because this one is thicker than the h+ pro it doesn't break as easily. I have it alligned perfectly, maybe it makes a difference.

I have one of these that I bought through amazon through a Nillkin page. the black boarder definitely covers a bit of the screen. a bit of the notch boarder covers the screen. If you move it up so that there's no black from the notch border you'll cut off quite a few pixels off the bottom making it very hard to use gesture based controls. I had a problem with air bubbles, the ones near the top corners went away naturally, the 2 at the bottom 2 corners refuse to go away even after adjusting them and applying pressure for over 5 minutes. It's not a problem with the case as there's a very slim edge separating the glass from the case (Tudia 2 part case). Depending on how much you're spending on it I wouldn't recommend it, I paid $16CAD and I have buyers remorse I can't recommend this protector to anyone. There's no damage/cracks/halo effects after 2 weeks of usages, so that's a plus. I've ordered the dbrand prism screen protector, I'm hoping it'll be the same size minus the black borders.

The best one is Omron tempered glass. They came in a set of two. Nillkin hides some of the screen. Omron doesn't.

Thank you all for your response I won't buy the Nilkin glass since it breaks so easily. It's a shame OnePlus 6 has such a huge incompatibility with budget 5D/6D tempered glasses. Spending 18 quid on the official doesn't make any sense cause it too will break after a fall which can happen anytime.

eltarod said:
The best one is Omron tempered glass. They came in a set of two. Nillkin hides some of the screen. Omron doesn't.
Click to expand...
Click to collapse
I haven't seen these. The only Omron I've found make medical instruments.

Nillkin 3d CP Max is poor glass. It is to small for screen and cuts some screen part in up. I don't recommend this glass.
Yeah, but where can we find Omron glass for OP6?

jelennn said:
Nillkin 3d CP Max is poor glass. It is to small for screen and cuts some screen part in up. I don't recommend this glass.
Yeah, but where can we find Omron glass for OP6?
Click to expand...
Click to collapse
VEGM92 said:
I haven't seen these. The only Omron I've found make medical instruments.
Click to expand...
Click to collapse
I'm terribly sorry. I just checked. It's Omoton. :laugh::laugh::laugh:

Where to get this Omoton ? Could you post a photo of it on the phone?

Nillkin CP+Max Tempered Glass Review
Consider this my review of the Nillkin CP+Max Oneplus 6 Tempered Glass
Bought from Nillkin's Aliexpress official store.
Overall I am satisfied(I knew pretty much all of the problems listed below when i bought it).
Keep in mind when viewing the photos I have installed the glass as much to the top as the case lets me(Practically the glass and the case touch at the top.Maybe if I had another case I wouldn't have even more of the notch cutting in, but that is another story)
Pros:
- Very nice quality glass with excellent touch feeling.Perfect oleophobic coating compared to 1-3$ tempered glasses. Worth the extra dollars for this reason only!
- Fits with rhinoshield crashguard case(you have to install the glass while wearing the crashguard case and not the one oneplus provides!)
- Edge to edge cover(as much as it can be, as the sides of the phone have a small curve)
Cons:
- The black borders around the edge are too thick on every side. This results to having about 0.5 to 1mm of screen pixels covered at all times,which is especially visible in the notch area,which cuts even more inside the screen. Also visible on the bootloader screen where text starts from the very left of the screen and half the first letter is hidden.While in normal app use you never see text that far to the side to make it a huge problem,it some times shows in 21:9 videos on youtube fullscreen. It seems this is a problem every tempered glass with black borders has. Not only Nillkin's!
- A portion around the edges,beneath the black border doesn't have adhesive. (I think this is because the phone's glass starts to curve there making it impossible for adhesive to stick,so they don't put adhesive right there)
Maybe Nillkin should make the borders thinner in the future and also have them in a lower layer of the glass,so it doesn't look like a window.