I need help and I need it fast!
I had my S7 G935F rooted a while ago and all was well until recently the Smorning it decided to just go off on its on and I tried to put it on charge thinking the battery was dead but when I plugged the cable into my phone it came up with "Custom binary blocked FRP" message.
So I tried to Press and hold “Volume UP + Power + Home” button together and as soon as I seen the Galaxy S7 Boot logo, I release all three buttons. To get into recovery mode and the same message came up "Custom binary blocked FRP"
So then the Next thing I plugged it into the Computer to see if the USB will pick up I hear the sound off it connecting but when I look to see if its connected in Devices & drivers my phone isn't there.
It does however boot into Odin mode on the phone, and when I open the Odin3 application I have on the pc it shows the Blue box underneath ID:COM. I just want to get my phone working again please someone help im begging.
Help?
It's all good people I done a step by step through rootsamsung.com I had to do a Factory reset im just glad its back to normal
Related
Im new to all rooting and Recently i attempted to root my phone for the first time it using the Samsung galaxy s3 toolkit V5. My build was not listed so i selected build #1, I installed the drivers to my pc, went to rooting options, selected option #3 All In One, Enabled usb debugging ans started the process which opened up odin and started doing its thing, but basically my phone was in odin mode with the android figure which says downloading... Do not turn off target! but of course I thought it wasnt working and i had to unplug the usb and put it back in (Im such a noob).
Now my phone will not boot at all, when i hold up volume power and home a battery image shows up and the phone shuts off again even though its plugged into my computer.
When i hold volume down power and home, this shows up: Warning! A custom os can cause critical problems in phone and installed applications
if you want to download a custom os press the volume up key, otherwhise press volume down to restart phone.
If i press voulume down it does not restart, it simply shuts off again.
If i press volume up it goes back to the downloading android even though it isnt downloading anything.
At the top left corner it says:
ODIN MODE
Product name: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
My phone is not even detected on my computer or by the toolkit anymore.
I cant find any solutions to my specific problem anywhere on the internet and im starting to lose hope. Please help me.
Double posting is not allowed. Please familiarize yourself with the rules you were required to read when registering and post your question only once, not across multiple sections. Thread closed.
So i had My T-Mobile GS6 Rooted
this is the **** up
I was going to factory reset my phone & i accidentally deleted my OS i had tried to use Odin to re install the rom i had but my phone was never getting detected by any computer, i had tried to use adb sideloader to try & install it thru there but it wasn't working& also bought a OTG cable to try & install the rom from there but it wasn't able to detect it . So i thought it was my charging port because i had lost my fast charging capability before i had tried to reset my phone. I had twrp installed but my dumb ass did something that now im not able to get into twrp. Every time i try to power on my phone it loads with a white screen after a couple of minutes it shuts off. I can't get into twrp but can still get into download mode.
Odin Mode
Product Name: SM-G920T
Current Binary: Custom
System Status: Custom
FRP Lock: Off
Secure Download: Enabled
Knox Warranty Void: 1 (0X0301)
RP SWREV: B:2 K:2 S:2
What I Was Running
XtreStoLite-2.0-Odex-Pure-ROM-Final-XXU2BOFJ
XtreStoLite_S6_Odexed_Pure_Aroma_Add-on_Package_XXU2BOFJ_v.2.0
S6_UniKernel_v8-0002-TWRP
BOGG_Alliance_Framework_RLv3_1
I replaced the charging port on it today so let me know what i can do to try to fix my phone or just let me know if its bricked
I had a similar situation. Put your phone into download, but do not enter download mode. Select cancel, quickly hit volume down, power button, and home buttom to see if you can enter into recovery. Good luck.
mtt311 said:
I had a similar situation. Put your phone into download, but do not enter download mode. Select cancel, quickly hit volume down, power button, and home buttom to see if you can enter into recovery. Good luck.
Click to expand...
Click to collapse
the thing is that i had twrp installed but my phone was not being recognized by any pc, i tried 2 different ones.
i downloaded the usb driver but odin would still not recognize my phone to flash it to stock
so i had tried to use adb sideloader to try & get a rom to have an OS back to be able to boot the phone but that never worked as well
when i was in twrp i saw that in the "mount" section there was an option for the OTG-USB
but that never did anything
I was still in twrp trying to figure out how to use the OTG to install the zip's into my phone when i went into advanced & I hit Fix Permissions.
i accidentally rebooted my phone & from then on i wasn't able to get into twrp, i ordered a usb charging port & waited for it for about 3 days (while waiting for the part i didn't use the phone)
Got the part a couple of days ago & changed the usb port but as soon as i connected the phone to the charger in a wall outlet or the pc's usb port the screen goes white after about 2 minutes it just shuts off
cant go into recovery but can go into Odin mode but even when i connect it to a pc it doesn't get recognize
my new plan is change the battery maybe it isn't holding a charge & that's why it wont let me get into recovery
anaveragehuman said:
If the battery couldn't hold a charge, then it wouldn't turn on at all.
Click to expand...
Click to collapse
It just seem to crap out while i had waited on the charging port. The period that i left the phone alone & didn't try anything because now it wont even power on with out connceting the charger but dies as soon as its unplugged
You need to let it charge first. Make it to 100% if you can.
Make sure you have properly installed samsung usb driver or better install smart switch.
hi friends,
i recently rooted my s6 edge plus (SM-G928C) and installed twrp manager from the play store and when i opened it it said twrp recovery is available and prompted for root access and i granted access to it and rebooting and trying it to flash it said recovery is not seandroid enforcing at that time i was able to enter the odin mode in my mobile by pressing(power + volume down + home) but soon after that i left my mobile alone and went out.after coming back home i tried switching it on this time it didn't even respond and say anything and i also tried to enter odin mode(power+volume down+home) and also emergency mode(power + volume down) and also recovery mode(power+volume up+home) but no response unlike the last time when it said 'recovery is not seandroid enforcing' and then i thought battery has drained out and put it in charge but it didn't charge even after putting it on charge for 3-4 hours and then i tried charging it with my computer even then it didn't respond but my pc said "initializing device driver" and detected my device with the name 'Exynos 7420 and disconnects" before which i had already installed kies 3 , smart switch and device drivers but no use i had tried using kies 3 and smart switch also but no use it says connect device to start upgrade.Now please please!! help me to get rid of this problem and i am not even able sleep properly because of this problem and my phone is just 5 months old.please help.
thank you in advance:crying:
reviewotg said:
hi friends,
i recently rooted my s6 edge plus (SM-G928C) and installed twrp manager from the play store and when i opened it it said twrp recovery is available and prompted for root access and i granted access to it and rebooting and trying it to flash it said recovery is not seandroid enforcing at that time i was able to enter the odin mode in my mobile by pressing(power + volume down + home) but soon after that i left my mobile alone and went out.after coming back home i tried switching it on this time it didn't even respond and say anything and i also tried to enter odin mode(power+volume down+home) and also emergency mode(power + volume down) and also recovery mode(power+volume up+home) but no response unlike the last time when it said 'recovery is not seandroid enforcing' and then i thought battery has drained out and put it in charge but it didn't charge even after putting it on charge for 3-4 hours and then i tried charging it with my computer even then it didn't respond but my pc said "initializing device driver" and detected my device with the name 'Exynos 7420 and disconnects" before which i had already installed kies 3 , smart switch and device drivers but no use i had tried using kies 3 and smart switch also but no use it says connect device to start upgrade.Now please please!! help me to get rid of this problem and i am not even able sleep properly because of this problem and my phone is just 5 months old.please help.
thank you in advance:crying:
Click to expand...
Click to collapse
Greetings and welcome to assist. The message seandroid is not enforcing is normal, it just means you have a custom recovery installed like twrp. If you connect your phone to kies and select emergency firmware recovery it will restore your phone to stock
Good Luck
Sawdoctor
Phone: J4+ (SM-J415F)
I wanted flash the stock ROM via Odin on pc and something went wrong (i don't know what) and now the phone shows "An error has occured while updating the device software. Use the emergency function in the Smart Switch PC software." I tried to go in the download mode but the phone "restarts" every 2 seconds when i connect it to the pc or the charger.The recovery didn't work either.
Note: The phone doesn't start even if it is not connected to the PC or to a charger.
I'm also stuck in this weird .non. bootloop
Hey, I had this problem before. The Battery maybe depleted during flashing. You have to find a way to charge it.
Try to boot into Odin warning screen or the IMEI screen, it's where the device won't reboot while your connected to a charger, then give it some time to charge until you have enough time to flash your stock ROM.
Its what I did xd, just watch out for overheating. Using a GN variant.
I solved it by holding all 3 buttons and plugging into USB, it did the whole rebooting thing as usual but I kept the buttons held for about 15/20 reboots and then it FINALLY went into download and I could flash stock rom. If important or not, I'd left it charging all night but showed no sign of life whilst it 'charged'
Something to Try!
The issue seems to be with the HOME CSC is corrupted on the latest version - Probably something by Samsung to outdo the Combo files being produced.
PLUG-IN THE PHONE to PC (NOT WALL), Press and hold POWER + VOL UP + VOL DOWN to BOOT the phone to the ODIN message screen (with the warning), not the Download Screen itself > in this Screen release all the buttons at the same time, if you do this right you should still be on that same screen. Then simply press the POWER once. This should show a Barcode IMEI Serial, etc (Then leave for 5-15 mins on USB Charge then quickly swap with a wall charger).
Then leave it to charge for normally phone charging time. Later PUT INTO ODIN MODE and retry.
I have done this 3 times on this device to make sure this is the correct way.
You might get away booting it to ODIN and trying to swap the power but unsure about that.
After this Go to GOOGLE Search on your laptop/pc > search for SAMFIRM > Put in the model and Download the Combination for J415FXXU5ASK1 and then in SAMFIRM software click Download ROM > Tick the Binary Nature box and then Flash the Combination file in the AP button of ODIN then the on that ROM go to Orange Calculator (IME) type in *#0808# on the next screen select the option with ADB and RM & DMT (normally the bottom) then select PDA on the next and then SAVE and RESET then flash the SAMSUNG ROM with the CSC, not the HOME!<< Just a NOTE! Not Responsible for bricked devices if you do this wrong! Advice only! :good:
Hey all,
a couple years back I messed up this S7 where I tried to get LineageOS running on it. Phone bricked, and has been stuck on Bootloop ever since.
Now I wanted to reflash a stock image, only problem is that I can't completely access download mode.
I reach the green screen with the warning message, but I can't press Volume Up or Volume Down to do anything else. Odin doesn't recognize it either.
So I am kinda stuck not being able to connect my phone to my computer at all for debugging purposes. I also tried to the VolUp + VolDown with USB cable with no success.
If anyone has clues where I could start my debugging, that would be great. Thanks.
I do have access to the battery to unplug it.
EDIT: I somehow managed to get into Odin Mode on my phone (I dont even know how, I held the button for more than a minute), but it's still not recognized on my Desktop.
EDIT 2: I tested the cable on my second S7, so it's not the connection. My PC won't pickup the damn thing no matter what I do