How to safely unlock the bootloader P9 ? Please for detailed instructions. Thanks.
I think people used DC unlocker..
So has anyone tried to relock the bootloader? It would be nice to know if there is a method to relock that can't be detected, so our warranty says intact. I've read that dc unlocker can do that but I've never seen confirmation.
clouds5 said:
So has anyone tried to relock the bootloader? It would be nice to know if there is a method to relock that can't be detected, so our warranty says intact. I've read that dc unlocker can do that but I've never seen confirmation.
Click to expand...
Click to collapse
I've just checked too on dc unlocker site and P9 results like the last added supported model with this features:
- direct unlock
- read bootloader code
- read unlock codes
- unlock FRP
So I just unlocked my Bootloader successfully with the DC unlocker tool and wanted to share the process with you guys. If you live in Europe and tried to get your unlock code directly from Huawei you may have run into some problems but this method works. My P9 is a EVA-L09 (europe single sim version).
Do this at your own risk.
You need this tool: https://www.dc-unlocker.com/ I did it with the most recent version as of now (V1.00.1290) which is the first that supports the P9.
Basically follow the instructions in the tool to get your device connected, it's straightforward. Then you need to make an account and _buy_ credits to read your unlock code. You need 4 credits so it will cost you 4 euro. This sucks, but it's no scam or anything. It works (as I just did it).
Just log in through the tool with the data provided after making an account and go to Unlocking -->"read bootloader code". Push the button and after a few secs your code appears. WRITE IT DOWN AND/OR COPY IT TO A .txt or something
[e] important: before you unlock/relock your phone or flash a custom recovery make sure that you go to developer settings and tick "enable OEM unlock". Missing this could lead to brick in certain situations, for more info read this article and do additional research.
Once you have the code you can start the unlocking process. This is the same for people that got their unlock code through other methods.
-Disconnect and power off your P9.
-Push volume down and connect it to your Computer, when the screen turns on you are in fastboot mode.
-Open any ADB/Fastboot tool (http://forum.xda-developers.com/showthread.php?t=2317790 <- i used this) and write:
"fastboot devices"
your device should be detected. Then write:
"fastboot oem unlock XXXXXXXXXXXXXXXXXXX" )X being the unlock code you got from DC unlocker)
It gives you a warning about warranty etc you have to comply and your bootloader is unlocked. As it warns you on the screen this will do a factory reset.
If you ever want to relock the bootloader put your phone in fastboot mode and type
"fastboot oem relock XXXXXXXXXXXXXXXXXX" the bootloader will be relocked but as far as we know it's detectable that it was unlocked before.
Hope this helps, cheers
clouds5 said:
So I just unlocked my Bootloader successfully with the DC unlocker tool and wanted to share the process with you guys. If you live in Europe and tried to get your unlock code directly from Huawei you may have run into some problems but this method works. My P9 is a EVA-L09 (europe single sim version).
You need this tool: https://www.dc-unlocker.com/ I did it with the most recent version as of now (V1.00.1290) which is the first that supports the P9.
Basically follow the instructions in the tool to get your device connected, it's straightforward. Then you need to make an account and _buy_ credits to read your unlock code. You need 4 credits so it will cost you 4 euro. This sucks, but it's no scam or anything. It works (as I just did it).
Just log in through the tool with the data provided after making an account and go to Unlocking -->"read bootloader code". Push the button and after a few secs your code appears. WRITE IT DOWN AND/OR COPY IT TO A .txt or something
Once you have the code you can start the unlocking process. This is the same for people that got their unlock code through other methods.
-Disconnect and power off your P9.
-Push volume down and connect it to your Computer, when the screen turns on you are in fastboot mode.
-Open any ADB/Fastboot tool (http://forum.xda-developers.com/showthread.php?t=2317790 <- i used this) and write:
"fastboot devices"
your device should be detected. Then write:
"fastboot oem unlock XXXXXXXXXXXXXXXXXXX" )X being the unlock code you got from DC unlocker)
It gives you a warning about warranty etc you have to comply and your bootloader is unlocked. As it warns you on the screen this will do a factory reset.
If you ever want to relock the bootloader put your phone in fastboot mode and type
"fastboot oem relock XXXXXXXXXXXXXXXXXX" the bootloader will be relocked but as far as we know it's detectable that it was unlocked before.
Hope this helps, cheers
Click to expand...
Click to collapse
Great to hear that I works!
Are you planning to flash twrp and root it?
Sent from my Nexus 5X
220volt said:
Great to hear that I works!
Are you planning to flash twrp and root it?
Sent from my Nexus 5X
Click to expand...
Click to collapse
Already rooted it with the guide from the root thread here. Was quick and worked great.
clouds5 said:
So I just unlocked my Bootloader successfully with the DC unlocker tool and wanted to share the process with you guys. If you live in Europe and tried to get your unlock code directly from Huawei you may have run into some problems but this method works. My P9 is a EVA-L09 (europe single sim version).
You need this tool: https://www.dc-unlocker.com/ I did it with the most recent version as of now (V1.00.1290) which is the first that supports the P9.
Basically follow the instructions in the tool to get your device connected, it's straightforward. Then you need to make an account and _buy_ credits to read your unlock code. You need 4 credits so it will cost you 4 euro. This sucks, but it's no scam or anything. It works (as I just did it).
Just log in through the tool with the data provided after making an account and go to Unlocking -->"read bootloader code". Push the button and after a few secs your code appears. WRITE IT DOWN AND/OR COPY IT TO A .txt or something
Once you have the code you can start the unlocking process. This is the same for people that got their unlock code through other methods.
-Disconnect and power off your P9.
-Push volume down and connect it to your Computer, when the screen turns on you are in fastboot mode.
-Open any ADB/Fastboot tool (http://forum.xda-developers.com/showthread.php?t=2317790 <- i used this) and write:
"fastboot devices"
your device should be detected. Then write:
"fastboot oem unlock XXXXXXXXXXXXXXXXXXX" )X being the unlock code you got from DC unlocker)
It gives you a warning about warranty etc you have to comply and your bootloader is unlocked. As it warns you on the screen this will do a factory reset.
If you ever want to relock the bootloader put your phone in fastboot mode and type
"fastboot oem relock XXXXXXXXXXXXXXXXXX" the bootloader will be relocked but as far as we know it's detectable that it was unlocked before.
Hope this helps, cheers
Click to expand...
Click to collapse
Thanks! I just unlocked my bootloader. It didn't work at first but this was because I had forgotten to enable OEM unlock in the settings: https://www.dc-unlocker.com/enable-oem-unlock
What are the benefits of unlocking the bootloader and are there any negatives?
Sent from my EVA-AL00 using Tapatalk
Milamber said:
What are the benefits of unlocking the bootloader and are there any negatives?
Sent from my EVA-AL00 using Tapatalk
Click to expand...
Click to collapse
The phone could become less secure, however after unlocking you should be able to install a modified recovery (twrp)
Do you still get automatic updates through the phone with an unlocked boot loader? I'm keen to put an English rom on my Chinese P9
Sent from my EVA-AL00 using Tapatalk
I've tried to unlock my P9 using the DC-Unlocker method but it's just saying "FAILED (remote: password wrong)"
Any ideas?
DreamHazard said:
I've tried to unlock my P9 using the DC-Unlocker method but it's just saying "FAILED (remote: password wrong)"
Any ideas?
Click to expand...
Click to collapse
Do you get that in the DC unlocker or when you actually type the unlock command in fastboot? DC unlocker is just for reading the bootloader code not the actual unlocking. If that makes sense.
Also don't forget to "enable OEM unlock" in the dev settings.
clouds5 said:
Do you get that in the DC unlocker or when you actually type the unlock command in fastboot? DC unlocker is just for reading the bootloader code not the actual unlocking. If that makes sense.
Also don't forget to "enable OEM unlock" in the dev settings.
Click to expand...
Click to collapse
I got the codes from DC unlocker, it's the response from fastboot oem unlock <code>. DC unlocker gave me four codes, I tried all of them. OEM Unlock is enabled in settings.
I have read elsewhere that the O2 handsets are bootloader locked, but mine came from the carphone warehouse, who usually send out carrier-free handsets (thus not O2 specific). Unfortunately I don't have a microsim from another network to test this, though there doesn't seem to be any O2 branding or apps.
EDIT: I've discovered the problem, I clicked "Read unlock codes" rather than "Read bootloader code" so the codes were obviously incorrect.
So even if we use dc unlocker to unlock our bootloader they can detect it???
Veretic said:
So even if we use dc unlocker to unlock our bootloader they can detect it???
Click to expand...
Click to collapse
DC unlocker doesn't actually unlock the bootloader, it's just an alternate way to get your specific unlock code. The actual unlocking is done with a command line.
clouds5 said:
DC unlocker doesn't actually unlock the bootloader, it's just an alternate way to get your specific unlock code. The actual unlocking is done with a command line.
Click to expand...
Click to collapse
I know it doesn't unlock it and only provides an unlock code but on other huawei phones it can relock the bootloader and leave the status locked instead of relocked.
Veretic said:
I know it doesn't unlock it and only provides an unlock code but on other huawei phones it can relock the bootloader and leave the status locked instead of relocked.
Click to expand...
Click to collapse
I've searched for that myself and found a post where someone said DC unlocker can relock the bootloader leaving the status "locked" instead of "relocked". But no confirmation if that is detectable or not and it was from a different device, so no guarantees it will work for the P9... So I guess we don't have a definitive answer how this affects your warranty and it may very well depend on the country you live in, as it usually does with warranty issues.
The official Huawei page states the following (link):
"Huawei will record your unlock request information; for software and hardware failures arising as a result of unlocking the bootloader, Huawei repair centers can provide repair services charged at the standard rate for repair work outside the scope of the warranty."
The way I interpret this it means that you only lose warranty if the damage is directly related to something you did by having the bootloader unlocked. If you have an unlocked bootloader and the camera module dies within the warranty period you should be fine unless they can prove that it died because of something you flashed through the unlocked bootloader. But as I said I think this is handled case by case and depends on your local warranty law.
I have an o2 P( bought in o2 store, used DC unlocker after some faffing with installing hisuite before DC unlocker would recognise my phone.
Got the unlock code unlocked bootloader, and restored 'most' of my data via the hisuite backup feature
I'm not doing anything else with it until I have all relevant files to recover from a sketchy flash or whatnot
clouds5 said:
So I just unlocked my Bootloader successfully with the DC unlocker tool and wanted to share the process with you guys. If you live in Europe and tried to get your unlock code directly from Huawei you may have run into some problems but this method works. My P9 is a EVA-L09 (europe single sim version).
Do this at your own risk.
You need this tool: https://www.dc-unlocker.com/ I did it with the most recent version as of now (V1.00.1290) which is the first that supports the P9.
Basically follow the instructions in the tool to get your device connected, it's straightforward. Then you need to make an account and _buy_ credits to read your unlock code. You need 4 credits so it will cost you 4 euro. This sucks, but it's no scam or anything. It works (as I just did it).
Just log in through the tool with the data provided after making an account and go to Unlocking -->"read bootloader code". Push the button and after a few secs your code appears. WRITE IT DOWN AND/OR COPY IT TO A .txt or something
[e] important: before you unlock/relock your phone or flash a custom recovery make sure that you go to developer settings and tick "enable OEM unlock". Missing this could lead to brick in certain situations, for more info read this article and do additional research.
Once you have the code you can start the unlocking process. This is the same for people that got their unlock code through other methods.
-Disconnect and power off your P9.
-Push volume down and connect it to your Computer, when the screen turns on you are in fastboot mode.
-Open any ADB/Fastboot tool (http://forum.xda-developers.com/showthread.php?t=2317790 <- i used this) and write:
"fastboot devices"
your device should be detected. Then write:
"fastboot oem unlock XXXXXXXXXXXXXXXXXXX" )X being the unlock code you got from DC unlocker)
It gives you a warning about warranty etc you have to comply and your bootloader is unlocked. As it warns you on the screen this will do a factory reset.
If you ever want to relock the bootloader put your phone in fastboot mode and type
"fastboot oem relock XXXXXXXXXXXXXXXXXX" the bootloader will be relocked but as far as we know it's detectable that it was unlocked before.
Hope this helps, cheers
Click to expand...
Click to collapse
I think this might be redundant, yesterday I contacted Huawei through their customer support form on their international page with my IMEI and S/No, and about 10hrs later got my bootloader unlock code with all the usual warnings about the warranty. I'm currently at work so I can't yet confirm if the code works or not but will update this post in a few hrs when I get home.
I was genuinely surprised that the person who contacted me via email was actually a finnish customer service agent, not some google translate-bot or anything.
My device is EVA-L09 and I live in Finland.
Hi
After manually updated to oreo, I cant enter device id in order to unlock bootloader. I have tried the generator and imei24.com but no luck. in fastboot says hone locked frp unlock
kindly help
edit:
managed finally with id generator
the-light said:
Hi
After manually updated to oreo, I cant enter device id in order to unlock bootloader. I have tried the generator and imei24.com but no luck. in fastboot says hone locked frp unlock
kindly help
edit:
managed finally with id generator
Click to expand...
Click to collapse
did you had oem unlock permissions i have my unlock code but i am unable to unlock through adb what method did you use
awais_666 said:
did you had oem unlock permissions i have my unlock code but i am unable to unlock through adb what method did you use
Click to expand...
Click to collapse
Code was not the issue, just getting phone id. try and use this one
the-light said:
Code was not the issue, just getting phone id. try and use this one
Click to expand...
Click to collapse
i have the id and unlock code as well but i cant boot in phone to give it oem unlock permission
i used dc unlocker i got my bootloader code and i want to check if its valid without unlocking yet
is this possible
thanks in advance
Sammy4798 said:
i used dc unlocker i got my bootloader code and i want to check if its valid without unlocking yet
is this possible
thanks in advance
Click to expand...
Click to collapse
Boot your phone into fastboot and type fastboot oem unlock <your15digitcode> if it's correct you will get a screen on your device saying are you sure you want to unlock bootloader. Use Volume Down to select no and power button to confirm. Since you used DC Unlocker it's highly unlikely it's a fake
thanks
Sammy4798 said:
i used dc unlocker i got my bootloader code and i want to check if its valid without unlocking yet
is this possible
thanks in advance
Click to expand...
Click to collapse
Is your DC unlocker is paid
Does it work? Which unlocker was used?
I used DC Unlocker today. Code worked fine.
I must pay 4€ for the bootloader unlock code.
There's a python script that uses the iemi to bruteforce the unlock code in few hours:
https://github.com/SkyEmie/huawei-honor-unlock-bootloader
I tried running the script yesterday but it was 24hrs and wasn't done so i gave up and did the dc-unlock
I've been trying at this for a couple days now,no success but no brick either Every phone I've owned up to this one I've been able to root and flash recoveries and custom roms as I pleased but this phone been tricky for me so I need someone here maybe to tell me my next move... So I called TMobile and I got the rep to give me a permanent unlock for my phone and I checked the Tmobile unlock app and its says permanently unlocked ...So my question now is since I cant seem to get the adb to "fastboot oem unlock" to change the device state to unlocked in the bootloader without asking me for my unlock code ,how to I get this to work? Is the next step requesting the unlock code from Oneplus because I have all the info for the form for Oneplus but don't know how to find unlock code for the form.... Help me out guys ... Thanks
bfreshdadon said:
I've been trying at this for a couple days now,no success but no brick either Every phone I've owned up to this one I've been able to root and flash recoveries and custom roms as I pleased but this phone been tricky for me so I need someone here maybe to tell me my next move... So I called TMobile and I got the rep to give me a permanent unlock for my phone and I checked the Tmobile unlock app and its says permanently unlocked ...So my question now is since I cant seem to get the adb to "fastboot oem unlock" to change the device state to unlocked in the bootloader without asking me for my unlock code ,how to I get this to work? Is the next step requesting the unlock code from Oneplus because I have all the info for the form for Oneplus but don't know how to find unlock code for the form.... Help me out guys ... Thanks
Click to expand...
Click to collapse
You now need to convert to Int. version, you can't "fastboot oem unlock" on T-Mo version without a stupid unlock token! Follow these instructions ===> https://forum.xda-developers.com/oneplus-7-pro/how-to/how-to-convert-tmobile-op7-to-t3935947
So I called TMobile and I got the rep to give me a permanent unlock for my phone and I checked the Tmobile unlock app and its says permanently unlocked
After this, you need to enable OEM unlock. See here.
Once you have enabled OEM Unlock under developer options, the fastboot oem unlock will work.
DanDroidOS said:
You now need to convert to Int. version, you can't "fastboot oem unlock" on T-Mo version without a stupid unlock token! Follow these instructions ===> https://forum.xda-developers.com/oneplus-7-pro/how-to/how-to-convert-tmobile-op7-to-t3935947
Click to expand...
Click to collapse
Thanks man,,gonna try that...
itskapil said:
So I called TMobile and I got the rep to give me a permanent unlock for my phone and I checked the Tmobile unlock app and its says permanently unlocked
After this, you need to enable OEM unlock. See here.
Once you have enabled OEM Unlock under developer options, the fastboot oem unlock will work.
Click to expand...
Click to collapse
Thanks man...Gonna check it out ..
ok so I have got a moto g pure (XT2163DL) with a tracfone bootloader and ive accepted that I cant find anyway so far to get my unlockable bootloader unlocked. I have looked and tried everything I could find without using a paid service which is probably what I need to do or just get another phone but first I have one more idea but I just dont know if it is even still possible or not. Can I use the cyanogenmod installer on my phone and unlock my bootloader and then switch back and keep an unlocked bootloader? Im running android 12. My oem unlock switch is not greyed out and it is set to unlock and even though I have tried using fastboot oem unlock and it said it was successful , it wasnt really unlocked afterall. motorola site just says my bootloader cant be unlocked. Is this a viable option?
ronnieshane1 said:
motorola site just says my bootloader cant be unlocked. Is this a viable option?
Click to expand...
Click to collapse
So why wasting time with this?