I bricked my Wellcom A88 (A71 variant) and the power button won't even turn on the phone. I know on some devices there is a way to still talk to the flashing chip by pressing certain key(s) while plugging in the USB cable to the computer. Is there a way to do this with this device and does someone have the special flashing tools that would be needed to revivie it? Right now my phone is completely dead.
I found on google that you can boot in emergency download mode to flash a stock ROM
Do this by pressing these buttons: (volume up + red button + power)
I hope that works
404test said:
I found on google that you can boot in emergency download mode to flash a stock ROM
Do this by pressing these buttons: (volume up + red button + power)
I hope that works
Click to expand...
Click to collapse
I cannot do that because the power key doesn't turn on the phone. The only thing that happens is the red light comes on when the charger is connected. Other than that the phone is completely dead. I cannot boot into any mode because it won't turn on at all. I know on some devices there are ways to either jumper something to reload an emergency bootrom for flashing, or a way to connect directly to the flashing chip for emergency flashing. On this device I cannot find a way to get into a flashing mode without the power button and it at least going through the bootloader, which jumps to the mode based on the keys pressed. Since the power key isn't doing anything I cannot get into any mode.
Thanks for your suggestion. If I could do that I would have done that already. i appreciate you trying to help though.
I will try taking it in for service and see if they will fix it or replace the motherboard. If they refuse I know where the location of the JTAG points and I have a graphic showing which one is what, but I have never flashed JTAG and don't have a cable or software for flashing. It would also require disassembling the phone to expose the JTAG points. I hope that is not a road I have to go down, but if the service center won't help me that will be my only option. If anyone is interested here is a photo showing the JTAG points for the the variants of the Foxcon A668, which are Wellcom A88, Apanda A60, Orange Boston, Cincinnati Bell Blaze, Gigabyte Gsmart G1305, Motorola XT502, Vibo A688, Chinavision Excalibur, Muchtel A1, Commtiva Z71 and Nexian Journey Lounge, CSL Spice MI300 and many others. This phone has to be one of the most successful rebranded devices ever.
I need file dump A88 or A668 , if you have it please upload for me thanks advance !
vanhue said:
I need file dump A88 or A668 , if you have it please upload for me thanks advance !
Click to expand...
Click to collapse
Please specify what files you want.
My phone ( wellcom ) dead boot , i need thí file to repair boot this phone .
vanhue said:
My phone ( wellcom ) dead boot , i need thí file to repair boot this phone .
Click to expand...
Click to collapse
You still haven't explained anything. What do you mean "dead boot?" What exact files do you need. If the phone won't turn on at all there is nothing you can do.
jboxer said:
You still haven't explained anything. What do you mean "dead boot?" What exact files do you need. If the phone won't turn on at all there is nothing you can do.
Click to expand...
Click to collapse
I have Jtag pinout but i dont have file dump , If i have file dump i can repair my phone !
I am having the same problem. I have noticed the red light is on when it is connected to the charger when either the battery is in or not. Does anybody think its the battery.
Same here!!!!
Well, mi cinci bel blaze (after a bad flashing process i think...) only vibrate once when i push the power button, but any mode (download, ftm, fastboot, recovery) was unsuccesfull for revive, anybody can help me?
if he can't get onto his phone how is supposed to file dump?
i need full flash dump for jtag
plz haw can i flash my phone i have lg flash pakage and firmware v21a ... i try to pute it inti emergency mode but i dont know haw also my pc dont detect the phone wile i instaled drivers -_- haw can i solve it plz urgent
Re: [Q] How to push deodexed app and framework in the phone
Try this if you have any question ask
http://forum.xda-developers.com/showthread.php?t=1629307
Sent From LG-P880
Try Use THANKS Button If I Helped
okey . can u tell me haw pute my phone in emergency mode?
Remove every thing (battery , SD card ,sim ...)
Now your phone in your hands without any thing .
1- Press vol+ and keep holding ...
2-Now you are holding vol+ ,, connect usb to PC .
3- Now you are holding and the phone is connected ,,, insert battery and keep holding for ~3 seconds .
Now you should see korean words with two arrows .
Sent From LG-P880
Try Use THANKS Button If I Helped
Hello Guys,
My phone is going good and these days i have been facing hanging prob.. It hangs at the logo. I already got this problem 3 time before and i used fixed it installing Stock Rom. But this time when i do the same through pc it doesnt recognise my phone . Tried using different pc's, different ports, different USB cables.. Tried Factory Reset by presiing vol up+ vol down & power but in vain.. I want to know whether i can out from this prob.. Help Me :highfive:
Hi there,
I see you opened a new thread here: http://forum.xda-developers.com/chef-central/android/micromax-bolt-a068-hanged-t3061167
Please wait there an answer.
Good luck
Hi guys
Ive got a huge problem to solve...
My i9070 had a splitted screen, and so i bought a second device in order to Replace the old with the new one...
As i disassembled the old phone i broke the flexcable of the powerbutton.
Is there a possibility to get access to the data (internal storage) or repair the powerbutton?
Please answer If you need more Info...
Thanks in advance!
so hello everyone my yuphoria y5010a is bricked but it is not totally bricked but fastboot and recovery is not accesable and the phone showing battery low splash screen(boot logo)only i tried method of sd card by dev @Titokhan but emmc dump is not helpful for me, i also tried with QFIL tool but port not showing i have installed qualcomm usb drivers and also adb is there.
anyone witch same problem and any dev who can help is needed.
thank you.
Hi try this press both vol+ n vol- together with battery removed. Then with buttons pressed insert battery n connect to system. U should see port no. I tried it once on snapdragon phone which is stuck on battery logo. Also I later learnt that battery logo is default fastboot mode. Try to flash from that screen. Plz post ur status.
bro i gave phone to sevice center they flashed stock rom on my device so iam good now but thANKS for helping me.