hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Try to hide google pay app with "magisk hide" in magisk app
Edit:
Google Pay is working with my OP6 [email protected] and TWRP
Google pay is working fine for me too also rooted with magisk
Some people have begun to have issues with Magisk and safetynet tripping over the past few days, we're trying to figure it out in the Magisk forums. This appears to have coincided with the Android Pie release and it's possible modifications have been made to safetynet. John Wu is looking into it. There are a few additional modules you can try along with Magisk Hide. Some work for some people. I've had no luck yet personally.
ClassicRando said:
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Click to expand...
Click to collapse
Busybox always makes me fail safety net, even systemless. Make sure you haven't installed a magisk module with it or a custom rom with it. I think recent Google versions check for it.
ClassicRando said:
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Click to expand...
Click to collapse
Try clearing play store data. Same thing happened to me and my play store was uncertified from unlocking the bootloader. Once I cleared app data it was certified and could add my card.
Yesterday 12:27 PM
Pundy
Try to hide google pay app with "magisk hide" in magisk app
Edit:
Google Pay is working with my OP6 [email protected] and TWRP
Click to expand...
Click to collapse
thanks for the tip but i already have it hidden.
Yesterday 11:25 PM
yldlj
Try clearing play store data. Same thing happened to me and my play store was uncertified from unlocking the bootloader. Once I cleared app data it was certified and could add my card.
Click to expand...
Click to collapse
i Tried this as it sounded promising, but no joy, i still can't get it to work, thanks for the help though so far everyone, but nothing has worked.
texasaggie1 said:
Busybox always makes me fail safety net, even systemless. Make sure you haven't installed a magisk module with it or a custom rom with it. I think recent Google versions check for it.
Click to expand...
Click to collapse
Unfortunately removing BusyBox didn't change the fail
fireguy0306 said:
Unfortunately removing BusyBox didn't change the fail
Click to expand...
Click to collapse
Have you tried using the island app ?
Also you know you have to wipe/reset Google Play before you check again correct?
once you fail safety net it will always fail no matter what until you reset Google Play
yldlj said:
Try clearing play store data. Same thing happened to me and my play store was uncertified from unlocking the bootloader. Once I cleared app data it was certified and could add my card.
Click to expand...
Click to collapse
i clear all data every time i change anything as standard practice, but thanks for the idea
texasaggie1 said:
Have you tried using the island app ?
Also you know you have to wipe/reset Google Play before you check again correct?
once you fail safety net it will always fail no matter what until you reset Google Play
Click to expand...
Click to collapse
i don't know what the island app is, but as above i wipe all data as standard everytime i change something, i'll look inti island, but i'm starting to thing this is just a bug
Have the problem as well..
I have the same problem. Running OP6, Android P Developer Preview 4, TWRP recovery and magisk (v16.7).
Magisk hide is enabled for GPay as well as many other banking apps. I know for sure its something to do with GPay, since the other apps that initially complained and triggered safetynet, started running as soon as I enabled Magisk hide for those apps.
ClassicRando said:
i clear all data every time i change anything as standard practice, but thanks for the idea
i don't know what the island app is, but as above i wipe all data as standard everytime i change something, i'll look inti island, but i'm starting to thing this is just a bug
Click to expand...
Click to collapse
Google pay issue with rooted oneplus 6 (PIE)
Hi all,
Try the steps as advised in the video, it worked for me
https://youtu.be/lyC1SpDWMNA
Thanks
Clear data of your and force app
Magisk hide check your app and other google app
And most imp disable phone permissions for google play service.....
android_smater said:
Clear data of your and force app
Magisk hide check your app and other google app
And most imp disable phone permissions for google play service.....
Click to expand...
Click to collapse
This worked for me thank you
Websterwjc said:
This worked for me thank you
Click to expand...
Click to collapse
Welcome...
ClassicRando said:
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Click to expand...
Click to collapse
I finally found the route cause of gpay not working, it was my WiFi, I found the answer purely by accident when I was in a shop and had forgotten my wallet, so I did a last ditch attempt to set up gpay again with my mobile data and it worked first time, when I got home i deleted the app and reinstalled while trying to set up via WiFi again and I got the same error message, switched to mobile data and it set up perfectly.
I have no idea why my WiFi was stopping gpay from getting set up, but that was the cause, 100% certain.
android_smater said:
Clear data of your and force app
Magisk hide check your app and other google app
And most imp disable phone permissions for google play service.....
Click to expand...
Click to collapse
yes, this works.
Hi,
It was working before for me until 15th March, and now it completely stopped working. I've tried to re-add my card, but then it complains about the device is rooted or altered. I could keep device certification, and safetynet check passes. Tried these methods, nothing.
Does anyone has any suggestions?
Thanks
antivirtel said:
Hi,
It was working before for me until 15th March, and now it completely stopped working. I've tried to re-add my card, but then it complains about the device is rooted or altered. I could keep device certification, and safetynet check passes. Tried these methods, nothing.
Does anyone has any suggestions?
Thanks
Click to expand...
Click to collapse
Update Magisk to v19 and clear data of the app, hide it in Magisk Hide and try to re-add it
I have a fix I u didn't have one, First of all hide all Google apps from Magisk hide.
Then goto setting, apps, permission and disable telephone permission of google play services. That's it.
Related
Does anyone know why the app is crashing? I do have magisk but safety net is passing.
Did you hide SU/Magisk for that app via Magisk Manager?
matase said:
Does anyone know why the app is crashing? I do have magisk but safety net is passing.
Click to expand...
Click to collapse
Try clearing data and cache from banking app, if safety net is passing.
akxak said:
Did you hide SU/Magisk for that app via Magisk Manager?
Click to expand...
Click to collapse
Magisk hide isn't working. At least not for me anyway!
hallo dare said:
Magisk hide isn't working. At least not for me anyway!
Click to expand...
Click to collapse
For me, it does... and solved problems especially with banking apps where developers don't understand that a rooted phone usually implies an experienced user taking care of his device and keeping it up to date... in opposite to "locked" devices with outdated firmware and open for any sort of side attacks.
akxak said:
For me, it does... and solved problems especially with banking apps where developers don't understand that a rooted phone usually implies an experienced user taking care of his device and keeping it up to date... in opposite to "locked" devices with outdated firmware and open for any sort of side attacks.
Click to expand...
Click to collapse
Keep getting error code 99z on my sky q app when i try to access viewing.
Magisk hide is on, but making no difference.
What version of magisk you running?
You on 5.1.8 update from today?
hallo dare said:
Keep getting error code 99z on my sky q app when i try to access viewing.
Magisk hide is on, but making no difference.
What version of magisk you running?
You on 5.1.8 update from today?
Click to expand...
Click to collapse
I am on 5.1.8, but it worked also on 5.1.7 before. Question is what Sky verifies... If Sky (like others) checks Widivine, then the unlocked bootloader downgrades from L1 to L3.
Check with the DRM Info app from the Play store.
My Chase app started that
akxak said:
I am on 5.1.8, but it worked also on 5.1.7 before. Question is what Sky verifies... If Sky (like others) checks Widivine, then the unlocked bootloader downgrades from L1 to L3.
Check with the DRM Info app from the Play store.
Click to expand...
Click to collapse
Yep L3.
akxak said:
Did you hide SU/Magisk for that app via Magisk Manager?
Click to expand...
Click to collapse
That worked. Thanks! I forgot I can hide apps
For what it's worth, hiding Magisk from my PNC app allows the app to run just fine UNTIL I attempt to deposit a check. At this point, it crashes every time. I'm currently on PNC app version 4.4.1. I didn't have this issue until about June of 2018. However, I'm not certain as to which version last worked as desired. My guess is that there's not easy solution for this.
My current work around is to to keep a copy of both the stock and patched boot.img file on my device. If ever I need to deposit a check, I can reboot to TWRP... flash the stock boot.img... reboot... deposit the check... reboot to TWRP... flash the patched boot.img... and reboot.
If someone knows of an easier approach, please share.
Nexus 6P
ABC Rom 8.1.0 (6/24/18)
Magisk v. 16.0
Anyone managed to run google and phone pay working on rooted PIE OS
nitinvaid said:
Anyone managed to run google and phone pay working on rooted PIE OS
Click to expand...
Click to collapse
yes bro.Both are running smoothly on my rooted Pie
Yes can confirm works perfectly....
kakkooran said:
yes bro.Both are running smoothly on my rooted Pie
Click to expand...
Click to collapse
what are the steps which file you flashed i am using magisk v17.1
Aduser345 said:
Yes can confirm works perfectly....
Click to expand...
Click to collapse
It's not working for me do I have to any anything specific settings
nitinvaid said:
It's not working for me do I have to any anything specific settings
Click to expand...
Click to collapse
First you have to be unrooted completely meaning...safetynet should pass....(i hope you know how to check)
Unrooting means you should be on oos 9 stock without custom recovery with bootloader unlocked
Then register or login in google pay using google id and phone number then root back again it should work just fine?? i hope it helps
Aduser345 said:
First you have to be unrooted completely meaning...safetynet should pass....(i hope you know how to check)
Unrooting means you should be on oos 9 stock without custom recovery with bootloader unlocked
Then register or login in google pay using google id and phone number then root back again it should work just fine i hope it helps
Click to expand...
Click to collapse
well like this phonepe was working working till yesterday i made some payments too but today its giving me error can not send payment from this device or something like that
Here
nitinvaid said:
Here
Click to expand...
Click to collapse
As a senior member you should know better, you have posted this question 3 times in different threads. What worked for me when this happened was to clear playstore data.
yldlj said:
As a senior member you should know better, you have posted this question 3 times in different threads. What worked for me when this happened was to clear playstore data.
Click to expand...
Click to collapse
Yea sorry for that I wanted to create thread but I posted there also....
And I have already tried all possible steps.. I have even uninstall and installed app.. still no luck
Google pay works on my 9.02 build but can't get it to work on any of the custom ROMs (AOSIP, Havoc, etc). On the interview xda had with one of the security software people from Google, the sw eng said that to pair down the number of possibles it first looks to see if it recognizes the name of build. Might explain why rooted stock works but not custom OS. Oh and it's not a safetynet issue, i can get safetynet to pass on custom roms....even to get google pay to accept and load credit cards....it just won't transact at the store.
Anyone found a solution to this?
I'm OOS OB7 with Magisk installed. SafetyNet passes and I use Magisk Hide to hide play store and google pay. However, When I try to register with Google Pay it says I have a custom ROM or rooted.
syedtahir16 said:
Anyone found a solution to this?
I'm OOS OB7 with Magisk installed. SafetyNet passes and I use Magisk Hide to hide play store and google pay. However, When I try to register with Google Pay it says I have a custom ROM or rooted.
Click to expand...
Click to collapse
Did you use the repackage magisk option? It's under settings in magisk
hallo dare said:
Did you use the repackage magisk option? It's under settings in magisk
Click to expand...
Click to collapse
Here is what I have tried so far:
Uninstalled Pay.
Made sure Magisk is running and SafetyNet is passing.
Repackage Magisk
Magisk Hide - Google Play Store.
Clear Playstore cache and data
Reboot
Install Google Pay
Magisk Hide Google pay
Launch Google Pay registration. App launches but on receiving OTP, it says that the devices does not meet google sec requirements etc and fails.
syedtahir16 said:
Here is what I have tried so far:
Uninstalled Pay.
Made sure Magisk is running and SafetyNet is passing.
Repackage Magisk
Magisk Hide - Google Play Store.
Clear Playstore cache and data
Reboot
Install Google Pay
Magisk Hide Google pay
Launch Google Pay registration. App launches but on receiving OTP, it says that the devices does not meet google sec requirements etc and fails.
Click to expand...
Click to collapse
Search for Tez hider in xda. it's a magisk module
kakkooran said:
Search for Tez hider in xda. it's a magisk module
Click to expand...
Click to collapse
It's not for magisk 18
you need disable telephone permission of Google Play service
You don't need to unroot and lock the bootloader and register gpay and root it back again and all those shiz. These steps will save you time:
• Disable "Telephone" permission for Google Play Services
• Clear data of GPay
• Hide GPay in Magisk Hide
• Register again on GPay
Use magisk and magisk hide plus
Remove phone from play service
It will work
But clear the data of Google app before doing above steps
Goto app settings > Google Pay > force close, clear data.
Goto settings > apps > google play services > turn off telephone (dialer)
Open google pay..
turn on the dialer icon later again after you've restored the account and stuff
Can't download Netflix for Pixel 3
In Google store says not available for my phone!
Anyone else?
Any links to most recent APK that I won't destroy my device with?
If your device is showing as not certified in play store settings, Netflix doesn't show for new installs. Hide the Play Store with Magisk, and then clear the Play store cache and data and open it back up. You should then show certified, and Netflix will be available. There is also a version for sideloading on the Netflix website.
sliding_billy said:
If your device is showing as not certified in play store settings, Netflix doesn't show for new installs. Hide the Play Store with Magisk, and then clear the Play store cache and data and open it back up. You should then show certified, and Netflix will be available. There is also a version for sideloading on the Netflix website.
Click to expand...
Click to collapse
My device has shown not certified for awhile. It never seemed to be an issue as I never had any problem with apps. But now I'm good [emoji4]
sliding_billy said:
If your device is showing as not certified in play store settings, Netflix doesn't show for new installs. Hide the Play Store with Magisk, and then clear the Play store cache and data and open it back up. You should then show certified, and Netflix will be available. There is also a version for sideloading on the Netflix website.
Click to expand...
Click to collapse
Play Store doesn't say anything about certification in the settings, but Netflix is missing so I assume I'm not certified. I tried following your instructions with Magisk Hide, but Netflix is still not showing. (If I try to search it from Google to get to the Play Store entry, it says my device is not compatible with this version.) I also tried sideloading the version from their website. It installs fine, but when I launch it, it says the device is not supported. I also tried using Magisk Hide on Netflix to no avail. Additionally, Magisk says my device passes both SafetyNet checks. Any other ideas?
fysix said:
Play Store doesn't say anything about certification in the settings, but Netflix is missing so I assume I'm not certified. I tried following your instructions with Magisk Hide, but Netflix is still not showing. (If I try to search it from Google to get to the Play Store entry, it says my device is not compatible with this version.) I also tried sideloading the version from their website. It installs fine, but when I launch it, it says the device is not supported. I also tried using Magisk Hide on Netflix to no avail. Additionally, Magisk says my device passes both SafetyNet checks. Any other ideas?
Click to expand...
Click to collapse
Not showing anything about certified means that it is not certified. Are you on a Pixel 3? Could be a handful of things causing it. Are you able to clear cache and data in Play Store? If not, you won't be able to get certified. That happens a lot if you have a Magisk Module that greys out that option like Edge Sensor. My sugestion is to flash boot.img to both slots and then clear cache/data in Play Store and get certification back before re-rooting. Once Netflix is installed, it doesn't matter if you are rooted. Keep Play Store hidden though.
sliding_billy said:
Not showing anything about certified means that it is not certified. Are you on a Pixel 3? Could be a handful of things causing it. Are you able to clear cache and data in Play Store? If not, you won't be able to get certified. That happens a lot if you have a Magisk Module that greys out that option like Edge Sensor. My sugestion is to flash boot.img to both slots and then clear cache/data in Play Store and get certification back before re-rooting. Once Netflix is installed, it doesn't matter if you are rooted. Keep Play Store hidden though.
Click to expand...
Click to collapse
Yep, pixel 3.
I'll give your suggestions a try as soon as I get a chance
sliding_billy said:
My sugestion is to flash boot.img to both slots and then clear cache/data in Play Store and get certification back before re-rooting.
Click to expand...
Click to collapse
Flashed the vanilla boot.img then cleared cache/data for Play store and I'm still not certified. Any other suggestions?
fysix said:
Flashed the vanilla boot.img then cleared cache/data for Play store and I'm still not certified. Any other suggestions?
Click to expand...
Click to collapse
Did it show anything about certification in Play Store Settings (at the very bottom)? It does sometimes take a couple of times entering Play Store and possibly rebooting to show as certified. There really is nothing else other than clearing cache/data in Play Store and being on a device that can show as certified (which clearly the Pixel 3 is). Normally, once you clear cache/data even rooting won't stop the certification (if you hide Play Store with Magisk Hide before opening it again) it just takes some little bit of time that I have not ever been able to completely narrow down to an exact action. I have to do this pretty much every month after loading the monthly update and it always works (Netflix does not need reinstalled or anything after the first time as long as the device is certified if an update shows up).
fysix said:
Flashed the vanilla boot.img then cleared cache/data for Play store and I'm still not certified. Any other suggestions?
Click to expand...
Click to collapse
Two other thoughts. Are you passing SafetyNet? If not, that may point to the root cause. The other one just occurred to me, but are you running a custom kernel? If not, your unlocked bootloader is being exposed and may very well be keeping Netflix from showing up. If that is the case, you definitely want to look into one of the custom kernels here. I use ElementalX, and it is the closest to stock with minor adjustments and of course it hides the unlocked BL.
sliding_billy said:
Two other thoughts. Are you passing SafetyNet? If not, that may point to the root cause. The other one just occurred to me, but are you running a custom kernel? If not, your unlocked bootloader is being exposed and may very well be keeping Netflix from showing up. If that is the case, you definitely want to look into one of the custom kernels here. I use ElementalX, and it is the closest to stock with minor adjustments and of course it hides the unlocked BL.
Click to expand...
Click to collapse
Same problem here.
Passing SafetyNet
Play Store get certification
But can't download on Play Store. Try installation apk from Netflix, App does not support this device
beinanchen said:
Same problem here.
Passing SafetyNet
Play Store get certification
But can't download on Play Store. Try installation apk from Netflix, App does not support this device
Click to expand...
Click to collapse
I just looked at the Netflix support page with instructions for side loading the app. It claims it is only compatible up to Android 7.1.2, so clearly the one on their site will not work anymore. They even say to contact them if you are certified, but I am guessing all they are going to ask you is about BL unlocking. To my question of the other user, are you running a custom kernel? I am sure Netflix sees a BL unlock if it is exposed. The only other thing you can do is try APKMirror. https://www.apkmirror.com/apk/netflix-inc/netflix/netflix-6-26-1-build-15-31696-release/
sliding_billy said:
I just looked at the Netflix support page with instructions for side loading the app. It claims it is only compatible up to Android 7.1.2, so clearly the one on their site will not work anymore. They even say to contact them if you are certified, but I am guessing all they are going to ask you is about BL unlocking. To my question of the other user, are you running a custom kernel? I am sure Netflix sees a BL unlock if it is exposed. The only other thing you can do is try APKMirror. https://www.apkmirror.com/apk/netflix-inc/netflix/netflix-6-26-1-build-15-31696-release/
Click to expand...
Click to collapse
yes, if my lock bl, I can download it from Play Store and working well, all the problem from Unlock bl
beinanchen said:
yes, if my lock bl, I can download it from Play Store and working well, all the problem from Unlock bl
Click to expand...
Click to collapse
Install a custom kernel. They all (as far as I know) hide the unlocked BL at this point.
sliding_billy said:
Install a custom kernel. They all (as far as I know) hide the unlocked BL at this point.
Click to expand...
Click to collapse
Try to install Proton Kernel, same problem. ?
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
sliding_billy said:
I just looked at the Netflix support page with instructions for side loading the app. It claims it is only compatible up to Android 7.1.2, so clearly the one on their site will not work anymore. They even say to contact them if you are certified, but I am guessing all they are going to ask you is about BL unlocking. To my question of the other user, are you running a custom kernel? I am sure Netflix sees a BL unlock if it is exposed. The only other thing you can do is try APKMirror. https://www.apkmirror.com/apk/netflix-inc/netflix/netflix-6-26-1-build-15-31696-release/
Click to expand...
Click to collapse
Already install, it's working now, but still can't update on Play Store
fysix said:
Flashed the vanilla boot.img then cleared cache/data for Play store and I'm still not certified. Any other suggestions?
Click to expand...
Click to collapse
beinanchen said:
Try to install Proton Kernel, same problem. ?
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
Already install, it's working now, but still can't update on Play Store
Click to expand...
Click to collapse
I wish I had more insight. I am using ElementalX and Magisk 19.3 with Play Store hidden. I actually factory reset my P3XL about a month ago to return to stock image from custom OS, and after all of the things mentioned was able to get Netflix from the Play Store and got the last update on June 14 (the one listed on the Play Store page). I'm not sure if something has changed since then. I am hesitant to uninstall and see if it is still there. I have 5 devices running Netflix including a P3 and P3XL. The other devices all are rooted with 19.3 as well and are running Nugget or Oreo with stock kernels. Just needed to get them to show certified and hide Play Store. The Pixels have been BL unlocked since the day they arrived last fall.
Fysix (and beinanchen if relevant)- I just read another post of your saying you are running Xposed. I mentioned that some Magisk modules could be an issue. I would disable all Magisk modules and reboot at least for testing.
sliding_billy said:
I would disable all Magisk modules and reboot at least for testing.
Click to expand...
Click to collapse
Currently I'm on a stock boot partition so no Magisk or Xposed is running. I did the little migration wizard from my old Pixel 2 to my Pixel 3 immediately after unlocking the bl and I remember Netflix being omitted then even with just the bootloader unlocked and no Magisk. I haven't had a chance to try ElementalX yet but I'm fairly optimistic that the kernel is ratting me out currently and ElementalX will fix it.
fysix said:
Currently I'm on a stock boot partition so no Magisk or Xposed is running. I did the little migration wizard from my old Pixel 2 to my Pixel 3 immediately after unlocking the bl and I remember Netflix being omitted then even with just the bootloader unlocked and no Magisk. I haven't had a chance to try ElementalX yet but I'm fairly optimistic that the kernel is ratting me out currently and ElementalX will fix it.
Click to expand...
Click to collapse
Either way, EX is a nice kernel. The EX Kernel manager is a really nice app and the dev deserves the financial support. He literally has that kernel updated normally before most folks have even installed their monthly Google update. I have separate copies on both of my Pixels. Plus, it beats the hell out of having to copy/flash the kernel manually. Let me know how it goes.
I have the same issue.
I'm on dirty unicorn with kirishakura kernel and magisk.
I'm passing safetynet thought and downloading the apk doesn't work as the app crash.
Edit: play store says I'm certified.
Same problem here.
Running a custom kernel that is based off of DU with some ElementalX cherry-picks. Rom is custom compiled AOSiP. Latest Magisk canary installed and passing SafetyNet. Only other thing I did was hack gms DB's to allow Google Pay to work. I'm also using Vanced YouTube.
sliding_billy said:
Either way, EX is a nice kernel. The EX Kernel manager is a really nice app and the dev deserves the financial support. He literally has that kernel updated normally before most folks have even installed their monthly Google update. I have separate copies on both of my Pixels. Plus, it beats the hell out of having to copy/flash the kernel manually. Let me know how it goes.
Click to expand...
Click to collapse
Tried ElementalX and it didn't make a difference
Hi guys. Im really hoping someone can help me here. This is my first post here so dont hate.
So I've been using this op6 since a year now.
My main issue- Unrooted but cant use some apps and games. They all crash because im supposedly rooted.
Tried installing the mario kart tour today. Had a similar issue with pokemon go so had to stop playing. Some banking apps refuse to work (axis bank). And most importantly Fortnite. This was the first app i tried installing on my phone after buying it. Crashed right after i jumped from the bus.
Confirmed facts about my phone to make this a faster process:
Unrooted (checked on root checker)
Developer options switched off
Oem locked
Passed safety net check from the app on playstore
Bought from the official oneplus store. Brand new out of the box.
Receiving latest OTA updates.
No supersu installed
Latest security patch updated via ota
Any information regarding this would be highly appreciated. I have nowhere else i would be able to explain this scenario.
Thanks
Try to install Magisk (if rooted) and select app or game in "Magisk hide" to say your smartphone is not rooted
If not rooted look if you're installed last update of Android système webview in Google play store.
I'm not rooted. Infact my bootloader is still locked. Magisk wont work right?
Im wondering what exactly could be triggering the false positive on these games.
Android system webview is disabled
Maybe a Magisk folder is still on your device. Search for "Magisk" folder in file manager and if you find anything, delete it.
Nah buddy! No magisk was ever installed on the device. A deep search for such a folder yielded no results.
Someone help please!
Try turning off developer options. I've seen some apps which refuse to work with them on (Marrow). Just an idea
Ozy67 said:
Try turning off developer options. I've seen some apps which refuse to work with them on (Marrow). Just an idea
Click to expand...
Click to collapse
Tried but to no avail. Dev options switched off.
Tunnel bear Vpn app uninstalled. Issue persists
Vatsal111192 said:
Tried but to no avail. Dev options switched off.
Tunnel bear Vpn app uninstalled. Issue persists
Click to expand...
Click to collapse
Ok you need to figure out if you have an app that is causing this installed. I recommend you do a factory reset, do not install any backups or apps when you go through initial setup, and then install and try any of your "problem apps" one at a time to see if they work.
tabletalker7 said:
Ok you need to figure out if you have an app that is causing this installed. I recommend you do a factory reset, do not install any backups or apps when you go through initial setup, and then install and try any of your "problem apps" one at a time to see if they work.
Click to expand...
Click to collapse
Thanks man. I thought that was gonna be a last resort thing. Might as well try it if nothing else is going to work out.
Hi!
I have an issue and was wondering if anyone have a solution. Suddenly Google wallet stopped working, saying that my phone is not up to security standards. It worked fine until this Sunday.
I'm using beyondrom, magisk app (zygisk and hidden) with Universal safteynet fix v.2,4 and Shamiko v.0,6. I also have all Google services etc. in deny list.
Anyone have had the same issue and/or something to try to fix?
eddy92 said:
Hi!
I have an issue and was wondering if anyone have a solution. Suddenly Google wallet stopped working, saying that my phone is not up to security standards. It worked fine until this Sunday.
I'm using beyondrom, magisk app (zygisk and hidden) with Universal safteynet fix v.2,4 and Shamiko v.0,6. I also have all Google services etc. in deny list.
Anyone have had the same issue and/or something to try to fix?
Click to expand...
Click to collapse
What does Play Integrity Checker or TB Checker report for Play Integrity results?
V0latyle said:
What does Play Integrity Checker or TB Checker report for Play Integrity results?
Click to expand...
Click to collapse
Huh, actually only meets device and Basic Integrity, strong Integrity is red.
Any tips on what to do/check?
eddy92 said:
Huh, actually only meets device and Basic Integrity, strong Integrity is red.
Any tips on what to do/check?
Click to expand...
Click to collapse
Strong integrity will always be red on an unlocked bootloader. Basic and Device integrity are the only requirements, Wallet does not use Strong. If you don't already, enable DenyList on Wallet and GPay - make sure you expand and enable on all subprocesses. Then, clear Wallet data and reopen it.
I had this issue a few days ago and fixed it with this method.
V0latyle said:
Strong integrity will always be red on an unlocked bootloader. Basic and Device integrity are the only requirements, Wallet does not use Strong. If you don't already, enable DenyList on Wallet and GPay - make sure you expand and enable on all subprocesses. Then, clear Wallet data and reopen it.
I had this issue a few days ago and fixed it with this method.
Click to expand...
Click to collapse
I have tried this several times, even with installing the wallet app in between. Unfortunatley it does not work! I have no GPay app, just the Wallet one.
I have fixed several other apps with this method, but Wallet does not want to work with me
eddy92 said:
I have tried this several times, even with installing the wallet app in between. Unfortunatley it does not work! I have no GPay app, just the Wallet one.
I have fixed several other apps with this method, but Wallet does not want to work with me
Click to expand...
Click to collapse
If you're running the latest kdragon version of safteynet fix, try deleting the module and install the latest version of the safteynet fix by displax. I myself had problems sometime ago and this helped. Then clear everything again restart and it'll probably work.
erik2041999 said:
If you're running the latest kdragon version of safteynet fix, try deleting the module and install the latest version of the safteynet fix by displax. I myself had problems sometime ago and this helped. Then clear everything again restart and it'll probably work.
Click to expand...
Click to collapse
Hi, thanks for the tip. Sorry stupid question maybe, but where can i find Displax safteynet fix? When searching I can only find Kdrag0ns version. Even on Displax Github it seems to link to the Kndrag0n version.
EDIT: Sorry, nvm I found it! (Link if someone else is looking: https://github.com/Displax/safetynet-fix/releases)
Still does'nt work though
I just realised, with the latest beyondrom magisk got changed to magisk alpha, so you kinda have to go and re-hide the app and so on. Have you done that?
erik2041999 said:
I just realised, with the latest beyondrom magisk got changed to magisk alpha, so you kinda have to go and re-hide the app and so on. Have you done that?
Click to expand...
Click to collapse
I have not yet updated to BeyondROM 2.3, I am still on 2.2 BVL1 version (from december 22). I will update to version 2.3 when I can, then perhaps I can try these steps again. Meybe it can help.
I should not have to re-hide etc. since I didnt update, right?
Nope, sorry I thought you did. But that's probably the reason for why the wallet isn't working. In that case first update and go through all the steps, should work then. It's one of the reasons magisk got replaced by magisk alpha in the newest beyond rom version.
erik2041999 said:
Nope, sorry I thought you did. But that's probably the reason for why the wallet isn't working. In that case first update and go through all the steps, should work then. It's one of the reasons magisk got replaced by magisk alpha in the newest beyond rom version.
Click to expand...
Click to collapse
Excellent, I will try asap. Thanks for all help!!
eddy92 said:
I have not yet updated to BeyondROM 2.3, I am still on 2.2 BVL1 version (from december 22). I will update to version 2.3 when I can, then perhaps I can try these steps again. Meybe it can help.
I should not have to re-hide etc. since I didnt update, right?
Click to expand...
Click to collapse
If you're on a custom ROM you may need to use MHPC to spoof a valid device profile.
I had the same problem here, I managed to solve it by installing Magisk delta and Universal SafetyNet modded.