Database Info

oneplus 6 rooted google pay issue

hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando

Try to hide google pay app with "magisk hide" in magisk app
Edit:
Google Pay is working with my OP6 [email protected] and TWRP

Google pay is working fine for me too also rooted with magisk

Some people have begun to have issues with Magisk and safetynet tripping over the past few days, we're trying to figure it out in the Magisk forums. This appears to have coincided with the Android Pie release and it's possible modifications have been made to safetynet. John Wu is looking into it. There are a few additional modules you can try along with Magisk Hide. Some work for some people. I've had no luck yet personally.

ClassicRando said:
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Click to expand...
Click to collapse
Busybox always makes me fail safety net, even systemless. Make sure you haven't installed a magisk module with it or a custom rom with it. I think recent Google versions check for it.

ClassicRando said:
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Click to expand...
Click to collapse
Try clearing play store data. Same thing happened to me and my play store was uncertified from unlocking the bootloader. Once I cleared app data it was certified and could add my card.

Yesterday 12:27 PM
Pundy
Try to hide google pay app with "magisk hide" in magisk app
Edit:
Google Pay is working with my OP6 [email protected] and TWRP
Click to expand...
Click to collapse
thanks for the tip but i already have it hidden.
Yesterday 11:25 PM
yldlj
Try clearing play store data. Same thing happened to me and my play store was uncertified from unlocking the bootloader. Once I cleared app data it was certified and could add my card.
Click to expand...
Click to collapse
i Tried this as it sounded promising, but no joy, i still can't get it to work, thanks for the help though so far everyone, but nothing has worked.

texasaggie1 said:
Busybox always makes me fail safety net, even systemless. Make sure you haven't installed a magisk module with it or a custom rom with it. I think recent Google versions check for it.
Click to expand...
Click to collapse
Unfortunately removing BusyBox didn't change the fail

fireguy0306 said:
Unfortunately removing BusyBox didn't change the fail
Click to expand...
Click to collapse
Have you tried using the island app ?
Also you know you have to wipe/reset Google Play before you check again correct?
once you fail safety net it will always fail no matter what until you reset Google Play

yldlj said:
Try clearing play store data. Same thing happened to me and my play store was uncertified from unlocking the bootloader. Once I cleared app data it was certified and could add my card.
Click to expand...
Click to collapse
i clear all data every time i change anything as standard practice, but thanks for the idea
texasaggie1 said:
Have you tried using the island app ?
Also you know you have to wipe/reset Google Play before you check again correct?
once you fail safety net it will always fail no matter what until you reset Google Play
Click to expand...
Click to collapse
i don't know what the island app is, but as above i wipe all data as standard everytime i change something, i'll look inti island, but i'm starting to thing this is just a bug

Have the problem as well..
I have the same problem. Running OP6, Android P Developer Preview 4, TWRP recovery and magisk (v16.7).
Magisk hide is enabled for GPay as well as many other banking apps. I know for sure its something to do with GPay, since the other apps that initially complained and triggered safetynet, started running as soon as I enabled Magisk hide for those apps.
ClassicRando said:
i clear all data every time i change anything as standard practice, but thanks for the idea
i don't know what the island app is, but as above i wipe all data as standard everytime i change something, i'll look inti island, but i'm starting to thing this is just a bug
Click to expand...
Click to collapse

Google pay issue with rooted oneplus 6 (PIE)
Hi all,
Try the steps as advised in the video, it worked for me
https://youtu.be/lyC1SpDWMNA
Thanks

Clear data of your and force app
Magisk hide check your app and other google app
And most imp disable phone permissions for google play service.....

android_smater said:
Clear data of your and force app
Magisk hide check your app and other google app
And most imp disable phone permissions for google play service.....
Click to expand...
Click to collapse
This worked for me thank you

Websterwjc said:
This worked for me thank you
Click to expand...
Click to collapse
Welcome...

ClassicRando said:
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Click to expand...
Click to collapse
I finally found the route cause of gpay not working, it was my WiFi, I found the answer purely by accident when I was in a shop and had forgotten my wallet, so I did a last ditch attempt to set up gpay again with my mobile data and it worked first time, when I got home i deleted the app and reinstalled while trying to set up via WiFi again and I got the same error message, switched to mobile data and it set up perfectly.
I have no idea why my WiFi was stopping gpay from getting set up, but that was the cause, 100% certain.

android_smater said:
Clear data of your and force app
Magisk hide check your app and other google app
And most imp disable phone permissions for google play service.....
Click to expand...
Click to collapse
yes, this works.

Hi,
It was working before for me until 15th March, and now it completely stopped working. I've tried to re-add my card, but then it complains about the device is rooted or altered. I could keep device certification, and safetynet check passes. Tried these methods, nothing.
Does anyone has any suggestions?
Thanks

antivirtel said:
Hi,
It was working before for me until 15th March, and now it completely stopped working. I've tried to re-add my card, but then it complains about the device is rooted or altered. I could keep device certification, and safetynet check passes. Tried these methods, nothing.
Does anyone has any suggestions?
Thanks
Click to expand...
Click to collapse
Update Magisk to v19 and clear data of the app, hide it in Magisk Hide and try to re-add it

I have a fix I u didn't have one, First of all hide all Google apps from Magisk hide.
Then goto setting, apps, permission and disable telephone permission of google play services. That's it.

Anyone managed to run google and phone pay working on rooted PIE OS

Anyone managed to run google and phone pay working on rooted PIE OS

nitinvaid said:
Anyone managed to run google and phone pay working on rooted PIE OS
Click to expand...
Click to collapse
yes bro.Both are running smoothly on my rooted Pie

Yes can confirm works perfectly....

kakkooran said:
yes bro.Both are running smoothly on my rooted Pie
Click to expand...
Click to collapse
what are the steps which file you flashed i am using magisk v17.1

Aduser345 said:
Yes can confirm works perfectly....
Click to expand...
Click to collapse
It's not working for me do I have to any anything specific settings

nitinvaid said:
It's not working for me do I have to any anything specific settings
Click to expand...
Click to collapse
First you have to be unrooted completely meaning...safetynet should pass....(i hope you know how to check)
Unrooting means you should be on oos 9 stock without custom recovery with bootloader unlocked
Then register or login in google pay using google id and phone number then root back again it should work just fine?? i hope it helps

Aduser345 said:
First you have to be unrooted completely meaning...safetynet should pass....(i hope you know how to check)
Unrooting means you should be on oos 9 stock without custom recovery with bootloader unlocked
Then register or login in google pay using google id and phone number then root back again it should work just fine i hope it helps
Click to expand...
Click to collapse
well like this phonepe was working working till yesterday i made some payments too but today its giving me error can not send payment from this device or something like that

Here

nitinvaid said:
Here
Click to expand...
Click to collapse
As a senior member you should know better, you have posted this question 3 times in different threads. What worked for me when this happened was to clear playstore data.

yldlj said:
As a senior member you should know better, you have posted this question 3 times in different threads. What worked for me when this happened was to clear playstore data.
Click to expand...
Click to collapse
Yea sorry for that I wanted to create thread but I posted there also....
And I have already tried all possible steps.. I have even uninstall and installed app.. still no luck

Google pay works on my 9.02 build but can't get it to work on any of the custom ROMs (AOSIP, Havoc, etc). On the interview xda had with one of the security software people from Google, the sw eng said that to pair down the number of possibles it first looks to see if it recognizes the name of build. Might explain why rooted stock works but not custom OS. Oh and it's not a safetynet issue, i can get safetynet to pass on custom roms....even to get google pay to accept and load credit cards....it just won't transact at the store.

Anyone found a solution to this?
I'm OOS OB7 with Magisk installed. SafetyNet passes and I use Magisk Hide to hide play store and google pay. However, When I try to register with Google Pay it says I have a custom ROM or rooted.

syedtahir16 said:
Anyone found a solution to this?
I'm OOS OB7 with Magisk installed. SafetyNet passes and I use Magisk Hide to hide play store and google pay. However, When I try to register with Google Pay it says I have a custom ROM or rooted.
Click to expand...
Click to collapse
Did you use the repackage magisk option? It's under settings in magisk

hallo dare said:
Did you use the repackage magisk option? It's under settings in magisk
Click to expand...
Click to collapse
Here is what I have tried so far:
Uninstalled Pay.
Made sure Magisk is running and SafetyNet is passing.
Repackage Magisk
Magisk Hide - Google Play Store.
Clear Playstore cache and data
Reboot
Install Google Pay
Magisk Hide Google pay
Launch Google Pay registration. App launches but on receiving OTP, it says that the devices does not meet google sec requirements etc and fails.

syedtahir16 said:
Here is what I have tried so far:
Uninstalled Pay.
Made sure Magisk is running and SafetyNet is passing.
Repackage Magisk
Magisk Hide - Google Play Store.
Clear Playstore cache and data
Reboot
Install Google Pay
Magisk Hide Google pay
Launch Google Pay registration. App launches but on receiving OTP, it says that the devices does not meet google sec requirements etc and fails.
Click to expand...
Click to collapse
Search for Tez hider in xda. it's a magisk module

kakkooran said:
Search for Tez hider in xda. it's a magisk module
Click to expand...
Click to collapse
It's not for magisk 18

you need disable telephone permission of Google Play service

You don't need to unroot and lock the bootloader and register gpay and root it back again and all those shiz. These steps will save you time:
• Disable "Telephone" permission for Google Play Services
• Clear data of GPay
• Hide GPay in Magisk Hide
• Register again on GPay

Use magisk and magisk hide plus
Remove phone from play service
It will work
But clear the data of Google app before doing above steps

Goto app settings > Google Pay > force close, clear data.
Goto settings > apps > google play services > turn off telephone (dialer)
Open google pay..
turn on the dialer icon later again after you've restored the account and stuff

Remove Magisk

Hi guys, because Magisk Hide doesn't work for my mobile banking app, I have to remove it for now. Can someone tell me how I do it without losing my data? I am on 9.5.11 on the EU version and don't have twrp. Would it be enough to just install the next update from the zip without installing Magisk before the reboot, or would my system break this way?

Just a thought...
Did you only use Magisk hide or did you also go to settings to Hide Magisk Manager? If you didn't use the latter option as well, then that could be why you're bank app still detects root

runningslow said:
Just a thought...
Did you only use Magisk hide or did you also go to settings to Hide Magisk Manager? If you didn't use the latter option as well, then that could be why you're bank app still detects root
Click to expand...
Click to collapse
Thank you for your suggestions, but I did hide the manger as well. I researched about the app and no one has a solution with current 19.3 version of Magisk. It works with the Canary build, so it should work again on 19.4 I think, but I have to pay my rent in October again.

Just Uninstall in Magisk Manager. But you should use 19.4.

Kleva94 said:
Thank you for your suggestions, but I did hide the manger as well. I researched about the app and no one has a solution with current 19.3 version of Magisk. It works with the Canary build, so it should work again on 19.4 I think, but I have to pay my rent in October again.
Click to expand...
Click to collapse
Then... Why not use the Canary build for now?

runningslow said:
Then... Why not use the Canary build for now?
Click to expand...
Click to collapse
I've read it's quite unstable and I don't want to risk a data loss.

Good News, everybody. Upgrading to Android 10 somehow solved the problem.

Safety Net fails after upgrading to OOS 11

I updated to the new OOS 11 via the Oxygen updater app and all is fine except safety net fails. I have an unlocked boot loader and coming from root, but I just wanted to try this out and don't care about having a rooted device at the moment, so I upgraded without doing anything else, but now safety net fails. And stuff like google pay doesn't work now.
Does anyone know how to fix safety net?

J3STUR said:
I updated to the new OOS 11 via the Oxygen updater app and all is fine except safety net fails. I have an unlocked boot loader and coming from root, but I just wanted to try this out and don't care about having a rooted device at the moment, so I upgraded without doing anything else, but now safety net fails. And stuff like google pay doesn't work now.
Does anyone know how to fix safety net?
Click to expand...
Click to collapse
yeah i can confirm having the same problem. I unrooted the phone and google pay only operates in rooted mode.

Unlocked bootloader always trips SafetyNet.

Go into Magisk settings and enable the "Magiskhide - Hide Magisk from various forms of detection" then reboot and try again.
Should show attached after that

djsubterrain said:
Go into Magisk settings and enable the "Magiskhide - Hide Magisk from various forms of detection" then reboot and try again.
Should show attached after that
Click to expand...
Click to collapse
I don't have that option in the settings. Do I have the wrong magisk version or something. I think it's the newest version.

J3STUR said:
I don't have that option in the settings. Do I have the wrong magisk version or something. I think it's the newest version.
Click to expand...
Click to collapse
I don't think you have root applied properly, this is what I see...

djsubterrain said:
I don't think you have root applied properly, this is what I see...
View attachment 5269509
Click to expand...
Click to collapse
on the main screen of magisk. tap the shield icon on bottom of screen. you should be able to find the magisk hide then.

MrSteelX said:
on the main screen of magisk. tap the shield icon on bottom of screen. you should be able to find the magisk hide then.
Click to expand...
Click to collapse
Um, why you telling me? Mine is working fine?

djsubterrain said:
I don't think you have root applied properly, this is what I see...
View attachment 5269509
Click to expand...
Click to collapse
No I don't have root. I just wanted to go back to stock, so I directly install the android 11 without doing anything. Do I need factory wipe to get it to back to normal?

J3STUR said:
No I don't have root. I just wanted to go back to stock, so I directly install the android 11 without doing anything. Do I need factory wipe to get it to back to normal?
Click to expand...
Click to collapse
Well, Magisk is for obtaining root, if you don't have root then why would you need to "hide" root that you haven't applied?
If you're asking about the bootloader then the only thing you could do is to lock it again, which will wipe your storage so make sure you back up

I'm on OB4 with lastest magisk canary without problems, try using it and enable magisk hide option and if problem persist enable magisk hide por Google play services and wipe playstore data.

Question Suddenly can't use Google wallet

Hi!
I have an issue and was wondering if anyone have a solution. Suddenly Google wallet stopped working, saying that my phone is not up to security standards. It worked fine until this Sunday.
I'm using beyondrom, magisk app (zygisk and hidden) with Universal safteynet fix v.2,4 and Shamiko v.0,6. I also have all Google services etc. in deny list.
Anyone have had the same issue and/or something to try to fix?

eddy92 said:
Hi!
I have an issue and was wondering if anyone have a solution. Suddenly Google wallet stopped working, saying that my phone is not up to security standards. It worked fine until this Sunday.
I'm using beyondrom, magisk app (zygisk and hidden) with Universal safteynet fix v.2,4 and Shamiko v.0,6. I also have all Google services etc. in deny list.
Anyone have had the same issue and/or something to try to fix?
Click to expand...
Click to collapse
What does Play Integrity Checker or TB Checker report for Play Integrity results?

V0latyle said:
What does Play Integrity Checker or TB Checker report for Play Integrity results?
Click to expand...
Click to collapse
Huh, actually only meets device and Basic Integrity, strong Integrity is red.
Any tips on what to do/check?

eddy92 said:
Huh, actually only meets device and Basic Integrity, strong Integrity is red.
Any tips on what to do/check?
Click to expand...
Click to collapse
Strong integrity will always be red on an unlocked bootloader. Basic and Device integrity are the only requirements, Wallet does not use Strong. If you don't already, enable DenyList on Wallet and GPay - make sure you expand and enable on all subprocesses. Then, clear Wallet data and reopen it.
I had this issue a few days ago and fixed it with this method.

V0latyle said:
Strong integrity will always be red on an unlocked bootloader. Basic and Device integrity are the only requirements, Wallet does not use Strong. If you don't already, enable DenyList on Wallet and GPay - make sure you expand and enable on all subprocesses. Then, clear Wallet data and reopen it.
I had this issue a few days ago and fixed it with this method.
Click to expand...
Click to collapse
I have tried this several times, even with installing the wallet app in between. Unfortunatley it does not work! I have no GPay app, just the Wallet one.
I have fixed several other apps with this method, but Wallet does not want to work with me

eddy92 said:
I have tried this several times, even with installing the wallet app in between. Unfortunatley it does not work! I have no GPay app, just the Wallet one.
I have fixed several other apps with this method, but Wallet does not want to work with me
Click to expand...
Click to collapse
If you're running the latest kdragon version of safteynet fix, try deleting the module and install the latest version of the safteynet fix by displax. I myself had problems sometime ago and this helped. Then clear everything again restart and it'll probably work.

erik2041999 said:
If you're running the latest kdragon version of safteynet fix, try deleting the module and install the latest version of the safteynet fix by displax. I myself had problems sometime ago and this helped. Then clear everything again restart and it'll probably work.
Click to expand...
Click to collapse
Hi, thanks for the tip. Sorry stupid question maybe, but where can i find Displax safteynet fix? When searching I can only find Kdrag0ns version. Even on Displax Github it seems to link to the Kndrag0n version.
EDIT: Sorry, nvm I found it! (Link if someone else is looking: https://github.com/Displax/safetynet-fix/releases)
Still does'nt work though

I just realised, with the latest beyondrom magisk got changed to magisk alpha, so you kinda have to go and re-hide the app and so on. Have you done that?

erik2041999 said:
I just realised, with the latest beyondrom magisk got changed to magisk alpha, so you kinda have to go and re-hide the app and so on. Have you done that?
Click to expand...
Click to collapse
I have not yet updated to BeyondROM 2.3, I am still on 2.2 BVL1 version (from december 22). I will update to version 2.3 when I can, then perhaps I can try these steps again. Meybe it can help.
I should not have to re-hide etc. since I didnt update, right?

Nope, sorry I thought you did. But that's probably the reason for why the wallet isn't working. In that case first update and go through all the steps, should work then. It's one of the reasons magisk got replaced by magisk alpha in the newest beyond rom version.

erik2041999 said:
Nope, sorry I thought you did. But that's probably the reason for why the wallet isn't working. In that case first update and go through all the steps, should work then. It's one of the reasons magisk got replaced by magisk alpha in the newest beyond rom version.
Click to expand...
Click to collapse
Excellent, I will try asap. Thanks for all help!!

eddy92 said:
I have not yet updated to BeyondROM 2.3, I am still on 2.2 BVL1 version (from december 22). I will update to version 2.3 when I can, then perhaps I can try these steps again. Meybe it can help.
I should not have to re-hide etc. since I didnt update, right?
Click to expand...
Click to collapse
If you're on a custom ROM you may need to use MHPC to spoof a valid device profile.

I had the same problem here, I managed to solve it by installing Magisk delta and Universal SafetyNet modded.