Related
Hi there.
Yesterday, for no apparent reason de device stopped syncing my Gapps data. OEM 2.1 ROM. I did a backup and reset the device to factory defaults. Even if battery went to 100% and the USB cable were connected, the phone did not finished the process and now I have a non turning on mini pro. Mac does not feel it, neither Windoze or Linux with dmesg. PC Companion won´t see it neither. Neither FlashTool. I tried to flash it with the original ftf but the phone do not turn on and of course FlashTool won't see it. Tried pressing home and on/off but nothing. I searched like a dork for "bricked xperia x10 mini pro" but there´s a lot of crowd calling a semi-bricked, bricked. Which is not, because a semi-bricked can be repaired with SEUS or even FlashTool.
I know is a whole different animal, but once I bricked a Nokia and with some trickery the device came to life.
Guys, you`re my only hope. I really like this phone for texting and everything.
Thank you for reading. Best regards.
Bump!
Please help me out! At least tell me anything.
Thanks.
same issue
hi,
I am facing the same problem. If u find any solution plz help me.
Guys, i have exactly same problem. I tried connect my U20i using usb cable, but it wont detect my phone. It only charge the phone and wont sync it. Its happen when i restore to factory setting. So if somebody can help me, i really appreciate it. Anyway sorry for my broken english.
Sent from my MT11i using xda app-developers app
PC Companion dont need to see device for repair as u can see at here
bad quality but i think its no hard to see how to do it, hope it will help u
DemoSK said:
PC Companion dont need to see device for repair as u can see at here
bad quality but i think its no hard to see how to do it, hope it will help u
Click to expand...
Click to collapse
What do you mean?
When PC Campanion says "hold back key and connect phone to USB" then It detects the device.
I have bricked SE Xperia X10 mini pro, same simptoms phone doesn't react to anything it's absolutely silent, no image, no text.
And yes I tried SEUS, PC Companion, Flashtool (with ggsetup) and Omnius. Nothing hepled.
May be a battery is down but I can't check it as well.
Same here. The phone doesn't react to "off" button, No LEDs, no display, no sound, won't get recognized by Flashtool when USB plugged in with "back" held, a total, real brick, dark and dead and invisible to all software.
The battery was full - it was full when the phone got bricked by installing a kernel for ICS.
helllppp
sharp_fang said:
Same here. The phone doesn't react to "off" button, No LEDs, no display, no sound, won't get recognized by Flashtool when USB plugged in with "back" held, a total, real brick, dark and dead and invisible to all software.
The battery was full - it was full when the phone got bricked by installing a kernel for ICS.
Click to expand...
Click to collapse
I have the same problem please help:crying:
When you put the tick called "preloader" in Flashtools - then the phone is dead... now only jtag method may can help you(in some phone service)
I remember that one morning I found my Xperia Arc S with stock GB 2.3.4 rom like dead although it was fine when I plugged the charger in before I slept. In the morning I couldn't turn it on, removing and replacing battery did nothing. No light when I charged it. It was really looking like it was forever dead. After a few days, in despair, I tried every reset method I could find about Xperia phones, except the one that finally worked:
I holded the back or menu button (I forgot which one) then plugged in the USB cordon to the computer. I got a green or blue light! I learned later that it was Fastboot mode or Flash mode. Then I unplugged the device, and it started like if nothing happened. I only had this problem once again. Since I rooted it and installed a custom rom, I never had this issue again.
If you didn't try this yet, that is worth trying
Bricked Sony Xperia X10 Mini Pro (U20)
Hi, I really need your help.
I have bricked my Xperia x10 Mini Pro (u20)
I had CM7 Custom Mod running on my phone,
I update CWM 2.0 to 5. something and suddenly it stop working.
It hangs at the Sony Ericsson Boot Logo.
It won't enter into Recovery Mode.
I tried the PC Companion Repair, but it won't go past the "press and hold the back Key"
Because my PC won't recognize my Phone. (I had the SEMC USB drivers installed already)
Please help!!! Thank you
nihilon said:
Hi there.
Yesterday, for no apparent reason de device stopped syncing my Gapps data. OEM 2.1 ROM. I did a backup and reset the device to factory defaults. Even if battery went to 100% and the USB cable were connected, the phone did not finished the process and now I have a non turning on mini pro. Mac does not feel it, neither Windoze or Linux with dmesg. PC Companion won´t see it neither. Neither FlashTool. I tried to flash it with the original ftf but the phone do not turn on and of course FlashTool won't see it. Tried pressing home and on/off but nothing. I searched like a dork for "bricked xperia x10 mini pro" but there´s a lot of crowd calling a semi-bricked, bricked. Which is not, because a semi-bricked can be repaired with SEUS or even FlashTool.
I know is a whole different animal, but once I bricked a Nokia and with some trickery the device came to life.
Guys, you`re my only hope. I really like this phone for texting and everything.
Thank you for reading. Best regards.
Click to expand...
Click to collapse
best solution is to find a person who can jtag
Guys! I need help desperately, I was messing with my new phone (Lenovo A586), trying to root it, and after a reboot it just went off... forever. It doesn't turn on at all, doesn't light up when charging, anything. PC recognizes it though, makes the usual sound when I plug the USB cable, but I don't know how to fix it!
Any idea on how to do a hard reset or something?
Any ideas welcomed! Thanks.
Chaurigol said:
Guys! I need help desperately, I was messing with my new phone (Lenovo A586), trying to root it, and after a reboot it just went off... forever. It doesn't turn on at all, doesn't light up when charging, anything. PC recognizes it though, makes the usual sound when I plug the USB cable, but I don't know how to fix it!
Any idea on how to do a hard reset or something?
Any ideas welcomed! Thanks.
Click to expand...
Click to collapse
HY,i think that you bricked your device,trying to root it ,if you did this try search youtube for a video that shows you how to unbrick it.If you were triyng to flash a rom you could have flashed the boot.img wrong,which cause your problem.If nothing works i am sorry.PLEASE PRESS THANKS IF I HELPED YOU!!!!!!
Wrong CWM.
Anyone?
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
babaghanush said:
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
Click to expand...
Click to collapse
Find flow ROM with expansion .exe and try it to sew from a computer.
could you further elaborate please
lykosha said:
Find flow ROM with expansion .exe and try it to sew from a computer.
Click to expand...
Click to collapse
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
babaghanush said:
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
Click to expand...
Click to collapse
Try to find driver on the web-site of producer. Set them. Overload a vehicle in Bootloader. In the controller of devices on компе must be determined your device. Then on a computer start sewing - .EXE.
Did you get this problem resolved? I have the exact problem with the exact phone!!!
thank you very much
Hi guys.
I have for a few weeks one Xiaomi Mi3 16GB Snapdragon (WCDMA). Because I thought it was too slow, I flashed another rom by Mirecovery, but I think I used a wrong one because the phone is completely dead! I am not able to get access to the recovery mode or fastboot. The keys don’t work anymore.
This is the rom I flashed: xiaomi.eu_multi_NX403A_4.7.11_jb-4.2. downloaded on miuiandroid.com.[later I heard this is a rom for zte z5s mini, so really wrong one ]
After installing of MiPhone2.11.6, the first time when I connected the phone with the pc, the red led kept lighting on and the driver wasn't installed, but the phone was recognized by MiFlash(com20, i think): flashing did't work because there wasn't a communication with the port. After that I tried to reinstall MiPhone and afther some attempts, when I connected the phone with the pc, the red led kept lighting on for a few seconds and the driver was installed. But the phone wasn't anymore recognized by Miphone, so again no possibility to flash it.
I’m really desperate because i used the phone just for 2 weeks.
I would really appreciate if somebody would come with a good solution.
Thank you.
chc2918 said:
Hi guys.
I have for a few weeks one Xiaomi Mi3 16GB Snapdragon (WCDMA). Because I thought it was too slow, I flashed another rom by Mirecovery, but I think I used a wrong one because the phone is completely dead! I am not able to get access to the recovery mode or fastboot. The keys don’t work anymore.
This is the rom I flashed: xiaomi.eu_multi_NX403A_4.7.11_jb-4.2. downloaded on miuiandroid.com.[later I heard this is a rom for zte z5s mini, so really wrong one ]
After installing of MiPhone2.11.6, the first time when I connected the phone with the pc, the red led kept lighting on and the driver wasn't installed, but the phone was recognized by MiFlash(com20, i think): flashing did't work because there wasn't a communication with the port. After that I tried to reinstall MiPhone and afther some attempts, when I connected the phone with the pc, the red led kept lighting on for a few seconds and the driver was installed. But the phone wasn't anymore recognized by Miphone, so again no possibility to flash it.
I’m really desperate because i used the phone just for 2 weeks.
I would really appreciate if somebody would come with a good solution.
Thank you.
Click to expand...
Click to collapse
if you have no access to recovery or fastboot, the phone is finished
one of the worst things you can do to a device is flash the wrong software, as you see.
Hi all,
I have a friend who has a goophone/kuphone couldnt tell you which as he never got mk tools to read it. A local shop flashed it for him with the wrong rom, So i have taken a look at it PC detects it flashtoolmod etc problem I have is finding a rom that one flashed will work,
With all the roms Ive tried only on does not 4032 all the time and thats 1Phone5_131031_backup_131125-160826
But the phone just wont turn on any ideas loosing the plot trying to get it sorted
thanks
UPDATE
Hi I know now its a Kiphone I managed to get a rom working I now have an either stranger problem.
When I plug in a USB cable (Either PC or Charger) the phone shuts down instantly then bootloops If i run Flashtools I can still upload roms
Etc but as soon as Thats done and i Take the cable out and turn it on all is fine put cable back in and it goes mental
Any help appreciated