Hi there.
Yesterday, for no apparent reason de device stopped syncing my Gapps data. OEM 2.1 ROM. I did a backup and reset the device to factory defaults. Even if battery went to 100% and the USB cable were connected, the phone did not finished the process and now I have a non turning on mini pro. Mac does not feel it, neither Windoze or Linux with dmesg. PC Companion won´t see it neither. Neither FlashTool. I tried to flash it with the original ftf but the phone do not turn on and of course FlashTool won't see it. Tried pressing home and on/off but nothing. I searched like a dork for "bricked xperia x10 mini pro" but there´s a lot of crowd calling a semi-bricked, bricked. Which is not, because a semi-bricked can be repaired with SEUS or even FlashTool.
I know is a whole different animal, but once I bricked a Nokia and with some trickery the device came to life.
Guys, you`re my only hope. I really like this phone for texting and everything.
Thank you for reading. Best regards.
Bump!
Please help me out! At least tell me anything.
Thanks.
same issue
hi,
I am facing the same problem. If u find any solution plz help me.
Guys, i have exactly same problem. I tried connect my U20i using usb cable, but it wont detect my phone. It only charge the phone and wont sync it. Its happen when i restore to factory setting. So if somebody can help me, i really appreciate it. Anyway sorry for my broken english.
Sent from my MT11i using xda app-developers app
PC Companion dont need to see device for repair as u can see at here
bad quality but i think its no hard to see how to do it, hope it will help u
DemoSK said:
PC Companion dont need to see device for repair as u can see at here
bad quality but i think its no hard to see how to do it, hope it will help u
Click to expand...
Click to collapse
What do you mean?
When PC Campanion says "hold back key and connect phone to USB" then It detects the device.
I have bricked SE Xperia X10 mini pro, same simptoms phone doesn't react to anything it's absolutely silent, no image, no text.
And yes I tried SEUS, PC Companion, Flashtool (with ggsetup) and Omnius. Nothing hepled.
May be a battery is down but I can't check it as well.
Same here. The phone doesn't react to "off" button, No LEDs, no display, no sound, won't get recognized by Flashtool when USB plugged in with "back" held, a total, real brick, dark and dead and invisible to all software.
The battery was full - it was full when the phone got bricked by installing a kernel for ICS.
helllppp
sharp_fang said:
Same here. The phone doesn't react to "off" button, No LEDs, no display, no sound, won't get recognized by Flashtool when USB plugged in with "back" held, a total, real brick, dark and dead and invisible to all software.
The battery was full - it was full when the phone got bricked by installing a kernel for ICS.
Click to expand...
Click to collapse
I have the same problem please help:crying:
When you put the tick called "preloader" in Flashtools - then the phone is dead... now only jtag method may can help you(in some phone service)
I remember that one morning I found my Xperia Arc S with stock GB 2.3.4 rom like dead although it was fine when I plugged the charger in before I slept. In the morning I couldn't turn it on, removing and replacing battery did nothing. No light when I charged it. It was really looking like it was forever dead. After a few days, in despair, I tried every reset method I could find about Xperia phones, except the one that finally worked:
I holded the back or menu button (I forgot which one) then plugged in the USB cordon to the computer. I got a green or blue light! I learned later that it was Fastboot mode or Flash mode. Then I unplugged the device, and it started like if nothing happened. I only had this problem once again. Since I rooted it and installed a custom rom, I never had this issue again.
If you didn't try this yet, that is worth trying
Bricked Sony Xperia X10 Mini Pro (U20)
Hi, I really need your help.
I have bricked my Xperia x10 Mini Pro (u20)
I had CM7 Custom Mod running on my phone,
I update CWM 2.0 to 5. something and suddenly it stop working.
It hangs at the Sony Ericsson Boot Logo.
It won't enter into Recovery Mode.
I tried the PC Companion Repair, but it won't go past the "press and hold the back Key"
Because my PC won't recognize my Phone. (I had the SEMC USB drivers installed already)
Please help!!! Thank you
nihilon said:
Hi there.
Yesterday, for no apparent reason de device stopped syncing my Gapps data. OEM 2.1 ROM. I did a backup and reset the device to factory defaults. Even if battery went to 100% and the USB cable were connected, the phone did not finished the process and now I have a non turning on mini pro. Mac does not feel it, neither Windoze or Linux with dmesg. PC Companion won´t see it neither. Neither FlashTool. I tried to flash it with the original ftf but the phone do not turn on and of course FlashTool won't see it. Tried pressing home and on/off but nothing. I searched like a dork for "bricked xperia x10 mini pro" but there´s a lot of crowd calling a semi-bricked, bricked. Which is not, because a semi-bricked can be repaired with SEUS or even FlashTool.
I know is a whole different animal, but once I bricked a Nokia and with some trickery the device came to life.
Guys, you`re my only hope. I really like this phone for texting and everything.
Thank you for reading. Best regards.
Click to expand...
Click to collapse
best solution is to find a person who can jtag
I have a TF101 SN60 - SBK1. I was trying today to root it to instal a stupid USB modem app and i bricked it.
Right now it is in recovery mode and i can`t get it out. Tried all the combination of the buttons and still doesn`t work.
I tried to reput the stock rom from Asus and i had success(2 times) but was still in recovery mode and after that i tried once more and it failled.. now i have 7 " !!!!! phone update failled !!!!" and i am very pissed and mad as i do not know what to do no more. I wasted 5 hours today trying to do something to it but i can`t no more. Please help me with some tips or maybe help me put it back to it`s normal state. Thank you.
Which recovery and version do you have installed, and how did you install it?
almost same issue
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
sriv2102 said:
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
Click to expand...
Click to collapse
Have you tried APX mode?
I would try another PC, or get a new charging cable. It is possible for the USB cable to charge but not work for USB. Happened to me.
I've been having some random reboots since I rooted, and decided I would try to unroot and reroot to see if the problem persists. However, I'm having trouble even getting the tablet to recognize it is plugged into the computer. It simply shows not charging (it knows the usb is there). Any tips?
I'd reinstall the drivers after uninstalling them using usbdeview.
Try this: link.
Just a note, charging status isn't an indication that the tablet is recognized since the device doesn't get full power from a computer's USB port by default.
muzzy996 said:
I'd reinstall the drivers after uninstalling them using usbdeview.
Try this: link.
Just a note, charging status isn't an indication that the tablet is recognized since the device doesn't get full power from a computer's USB port by default.
Click to expand...
Click to collapse
Absolutely correct. A lot of people make a mistake on this. Thanks for mentioning that for the OP.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
chadbrochill27 said:
I've been having some random reboots since I rooted, and decided I would try to unroot and reroot to see if the problem persists. However, I'm having trouble even getting the tablet to recognize it is plugged into the computer. It simply shows not charging (it knows the usb is there). Any tips?
Click to expand...
Click to collapse
Not charging, or a 'red 'X' through the battery'-not charging?
Hi! I tried to flash a custom rom on my android smartphone. (SKK Hyper X Blade II) After flashing, my phone won't turn on, or even show a charging sign whenever I charge it. I tried to connect it to my computer but it doesn't seem to detect my phone. What should I do, or maybe I've got nothing to do. Please help me. Thank you
I tried to downgrade my phone from the Oreo version to Nugat, the process started, but after the first reboot looks like the bricked is device, I tried to start in fastboot or recovery mode but it doesnt work...When I put the phone to charge nothing happens ... When I plug the phone to the pc does not recognize, however the windows plays the sound of the device when connects.
Can someone help me please? thank you!
Sorry for my bad english
hi
your from Brasil ??
leandro9000 said:
I tried to downgrade my phone from the Oreo version to Nugat, the process started, but after the first reboot looks like the bricked is device, I tried to start in fastboot or recovery mode but it doesnt work...When I put the phone to charge nothing happens ... When I plug the phone to the pc does not recognize, however the windows plays the sound of the device when connects.
Can someone help me please? thank you!
Sorry for my bad english
Click to expand...
Click to collapse
how did you be able to downgrade it?
no need help ....no return here...no need fix nothing