Related
I installed the DP3 build a month ago or so along with Magisk so I could use Android Pay. Android Pay was working fine for a couple weeks and then about a week ago, between breakfast and lunch, Android Pay stopped working. I did a SafetyNet check with Magisk and it failed. Today I tried reflashing DP3 (without a full wipe) and installed Magisk (via TWRP) and SafetyNet is still failing. Short of reflashing DP3 with a full wipe, what else can I try to get SafetyNet check to pass?
greenmaze said:
I installed the DP3 build a month ago or so along with Magisk so I could use Android Pay. Android Pay was working fine for a couple weeks and then about a week ago, between breakfast and lunch, Android Pay stopped working. I did a SafetyNet check with Magisk and it failed. Today I tried reflashing DP3 (without a full wipe) and installed Magisk (via TWRP) and SafetyNet is still failing. Short of reflashing DP3 with a full wipe, what else can I try to get SafetyNet check to pass?
Click to expand...
Click to collapse
Although Android Pay may work on DP3 Google make it clear that it fails CTS which means it will always fail Safety Test. So Android Pay is not guaranteed.
https://developer.android.com/preview/release-notes
Android P beta devices*aren't*Compatibility Test Suite (CTS)approved, but they have passed preliminary testing and provide the same set of APIs for developers. Apps that depend on CTS-approved builds might not work normally on supported devices.
Sent from my Pixel 2 XL using Tapatalk
If I had this issue, I would flash a custom kernel. I'm currently on the latest Sultan's and haven't had any issues with safetynet whatsoever.
I had this issue briefly. Clear data for Google Play Services and Google Play Store, then reboot. It cleared it right up for me.
DuckRuckus said:
If I had this issue, I would flash a custom kernel. I'm currently on the latest Sultan's and haven't had any issues with safetynet whatsoever.
Click to expand...
Click to collapse
I installed this Kernel after a complete wipe and resintall of DP3 and still no luck.
lightningdude said:
I had this issue briefly. Clear data for Google Play Services and Google Play Store, then reboot. It cleared it right up for me.
Click to expand...
Click to collapse
I tried this. I even reinstalled DP3 with a full wipe and still no luck.
Try toggle magisk hide and exit app. Usually a reboot fixes it also.
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Try to hide google pay app with "magisk hide" in magisk app
Edit:
Google Pay is working with my OP6 [email protected] and TWRP
Google pay is working fine for me too also rooted with magisk
Some people have begun to have issues with Magisk and safetynet tripping over the past few days, we're trying to figure it out in the Magisk forums. This appears to have coincided with the Android Pie release and it's possible modifications have been made to safetynet. John Wu is looking into it. There are a few additional modules you can try along with Magisk Hide. Some work for some people. I've had no luck yet personally.
ClassicRando said:
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Click to expand...
Click to collapse
Busybox always makes me fail safety net, even systemless. Make sure you haven't installed a magisk module with it or a custom rom with it. I think recent Google versions check for it.
ClassicRando said:
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Click to expand...
Click to collapse
Try clearing play store data. Same thing happened to me and my play store was uncertified from unlocking the bootloader. Once I cleared app data it was certified and could add my card.
Yesterday 12:27 PM
Pundy
Try to hide google pay app with "magisk hide" in magisk app
Edit:
Google Pay is working with my OP6 [email protected] and TWRP
Click to expand...
Click to collapse
thanks for the tip but i already have it hidden.
Yesterday 11:25 PM
yldlj
Try clearing play store data. Same thing happened to me and my play store was uncertified from unlocking the bootloader. Once I cleared app data it was certified and could add my card.
Click to expand...
Click to collapse
i Tried this as it sounded promising, but no joy, i still can't get it to work, thanks for the help though so far everyone, but nothing has worked.
texasaggie1 said:
Busybox always makes me fail safety net, even systemless. Make sure you haven't installed a magisk module with it or a custom rom with it. I think recent Google versions check for it.
Click to expand...
Click to collapse
Unfortunately removing BusyBox didn't change the fail
fireguy0306 said:
Unfortunately removing BusyBox didn't change the fail
Click to expand...
Click to collapse
Have you tried using the island app ?
Also you know you have to wipe/reset Google Play before you check again correct?
once you fail safety net it will always fail no matter what until you reset Google Play
yldlj said:
Try clearing play store data. Same thing happened to me and my play store was uncertified from unlocking the bootloader. Once I cleared app data it was certified and could add my card.
Click to expand...
Click to collapse
i clear all data every time i change anything as standard practice, but thanks for the idea
texasaggie1 said:
Have you tried using the island app ?
Also you know you have to wipe/reset Google Play before you check again correct?
once you fail safety net it will always fail no matter what until you reset Google Play
Click to expand...
Click to collapse
i don't know what the island app is, but as above i wipe all data as standard everytime i change something, i'll look inti island, but i'm starting to thing this is just a bug
Have the problem as well..
I have the same problem. Running OP6, Android P Developer Preview 4, TWRP recovery and magisk (v16.7).
Magisk hide is enabled for GPay as well as many other banking apps. I know for sure its something to do with GPay, since the other apps that initially complained and triggered safetynet, started running as soon as I enabled Magisk hide for those apps.
ClassicRando said:
i clear all data every time i change anything as standard practice, but thanks for the idea
i don't know what the island app is, but as above i wipe all data as standard everytime i change something, i'll look inti island, but i'm starting to thing this is just a bug
Click to expand...
Click to collapse
Google pay issue with rooted oneplus 6 (PIE)
Hi all,
Try the steps as advised in the video, it worked for me
https://youtu.be/lyC1SpDWMNA
Thanks
Clear data of your and force app
Magisk hide check your app and other google app
And most imp disable phone permissions for google play service.....
android_smater said:
Clear data of your and force app
Magisk hide check your app and other google app
And most imp disable phone permissions for google play service.....
Click to expand...
Click to collapse
This worked for me thank you
Websterwjc said:
This worked for me thank you
Click to expand...
Click to collapse
Welcome...
ClassicRando said:
hi i have a magisk and twrp rooted oneplus 6 with radioactive kernel, and can't use google pay, i get an error message please check your settings after it's tried to verify with the bank, but the bank say everything is fine, and it was working before i unlocked bootloaders and installed custon software, any ideas out there, any help would be greatly appreciated, thanks
Rando
Click to expand...
Click to collapse
I finally found the route cause of gpay not working, it was my WiFi, I found the answer purely by accident when I was in a shop and had forgotten my wallet, so I did a last ditch attempt to set up gpay again with my mobile data and it worked first time, when I got home i deleted the app and reinstalled while trying to set up via WiFi again and I got the same error message, switched to mobile data and it set up perfectly.
I have no idea why my WiFi was stopping gpay from getting set up, but that was the cause, 100% certain.
android_smater said:
Clear data of your and force app
Magisk hide check your app and other google app
And most imp disable phone permissions for google play service.....
Click to expand...
Click to collapse
yes, this works.
Hi,
It was working before for me until 15th March, and now it completely stopped working. I've tried to re-add my card, but then it complains about the device is rooted or altered. I could keep device certification, and safetynet check passes. Tried these methods, nothing.
Does anyone has any suggestions?
Thanks
antivirtel said:
Hi,
It was working before for me until 15th March, and now it completely stopped working. I've tried to re-add my card, but then it complains about the device is rooted or altered. I could keep device certification, and safetynet check passes. Tried these methods, nothing.
Does anyone has any suggestions?
Thanks
Click to expand...
Click to collapse
Update Magisk to v19 and clear data of the app, hide it in Magisk Hide and try to re-add it
I have a fix I u didn't have one, First of all hide all Google apps from Magisk hide.
Then goto setting, apps, permission and disable telephone permission of google play services. That's it.
Can't download Netflix for Pixel 3
In Google store says not available for my phone!
Anyone else?
Any links to most recent APK that I won't destroy my device with?
If your device is showing as not certified in play store settings, Netflix doesn't show for new installs. Hide the Play Store with Magisk, and then clear the Play store cache and data and open it back up. You should then show certified, and Netflix will be available. There is also a version for sideloading on the Netflix website.
sliding_billy said:
If your device is showing as not certified in play store settings, Netflix doesn't show for new installs. Hide the Play Store with Magisk, and then clear the Play store cache and data and open it back up. You should then show certified, and Netflix will be available. There is also a version for sideloading on the Netflix website.
Click to expand...
Click to collapse
My device has shown not certified for awhile. It never seemed to be an issue as I never had any problem with apps. But now I'm good [emoji4]
sliding_billy said:
If your device is showing as not certified in play store settings, Netflix doesn't show for new installs. Hide the Play Store with Magisk, and then clear the Play store cache and data and open it back up. You should then show certified, and Netflix will be available. There is also a version for sideloading on the Netflix website.
Click to expand...
Click to collapse
Play Store doesn't say anything about certification in the settings, but Netflix is missing so I assume I'm not certified. I tried following your instructions with Magisk Hide, but Netflix is still not showing. (If I try to search it from Google to get to the Play Store entry, it says my device is not compatible with this version.) I also tried sideloading the version from their website. It installs fine, but when I launch it, it says the device is not supported. I also tried using Magisk Hide on Netflix to no avail. Additionally, Magisk says my device passes both SafetyNet checks. Any other ideas?
fysix said:
Play Store doesn't say anything about certification in the settings, but Netflix is missing so I assume I'm not certified. I tried following your instructions with Magisk Hide, but Netflix is still not showing. (If I try to search it from Google to get to the Play Store entry, it says my device is not compatible with this version.) I also tried sideloading the version from their website. It installs fine, but when I launch it, it says the device is not supported. I also tried using Magisk Hide on Netflix to no avail. Additionally, Magisk says my device passes both SafetyNet checks. Any other ideas?
Click to expand...
Click to collapse
Not showing anything about certified means that it is not certified. Are you on a Pixel 3? Could be a handful of things causing it. Are you able to clear cache and data in Play Store? If not, you won't be able to get certified. That happens a lot if you have a Magisk Module that greys out that option like Edge Sensor. My sugestion is to flash boot.img to both slots and then clear cache/data in Play Store and get certification back before re-rooting. Once Netflix is installed, it doesn't matter if you are rooted. Keep Play Store hidden though.
sliding_billy said:
Not showing anything about certified means that it is not certified. Are you on a Pixel 3? Could be a handful of things causing it. Are you able to clear cache and data in Play Store? If not, you won't be able to get certified. That happens a lot if you have a Magisk Module that greys out that option like Edge Sensor. My sugestion is to flash boot.img to both slots and then clear cache/data in Play Store and get certification back before re-rooting. Once Netflix is installed, it doesn't matter if you are rooted. Keep Play Store hidden though.
Click to expand...
Click to collapse
Yep, pixel 3.
I'll give your suggestions a try as soon as I get a chance
sliding_billy said:
My sugestion is to flash boot.img to both slots and then clear cache/data in Play Store and get certification back before re-rooting.
Click to expand...
Click to collapse
Flashed the vanilla boot.img then cleared cache/data for Play store and I'm still not certified. Any other suggestions?
fysix said:
Flashed the vanilla boot.img then cleared cache/data for Play store and I'm still not certified. Any other suggestions?
Click to expand...
Click to collapse
Did it show anything about certification in Play Store Settings (at the very bottom)? It does sometimes take a couple of times entering Play Store and possibly rebooting to show as certified. There really is nothing else other than clearing cache/data in Play Store and being on a device that can show as certified (which clearly the Pixel 3 is). Normally, once you clear cache/data even rooting won't stop the certification (if you hide Play Store with Magisk Hide before opening it again) it just takes some little bit of time that I have not ever been able to completely narrow down to an exact action. I have to do this pretty much every month after loading the monthly update and it always works (Netflix does not need reinstalled or anything after the first time as long as the device is certified if an update shows up).
fysix said:
Flashed the vanilla boot.img then cleared cache/data for Play store and I'm still not certified. Any other suggestions?
Click to expand...
Click to collapse
Two other thoughts. Are you passing SafetyNet? If not, that may point to the root cause. The other one just occurred to me, but are you running a custom kernel? If not, your unlocked bootloader is being exposed and may very well be keeping Netflix from showing up. If that is the case, you definitely want to look into one of the custom kernels here. I use ElementalX, and it is the closest to stock with minor adjustments and of course it hides the unlocked BL.
sliding_billy said:
Two other thoughts. Are you passing SafetyNet? If not, that may point to the root cause. The other one just occurred to me, but are you running a custom kernel? If not, your unlocked bootloader is being exposed and may very well be keeping Netflix from showing up. If that is the case, you definitely want to look into one of the custom kernels here. I use ElementalX, and it is the closest to stock with minor adjustments and of course it hides the unlocked BL.
Click to expand...
Click to collapse
Same problem here.
Passing SafetyNet
Play Store get certification
But can't download on Play Store. Try installation apk from Netflix, App does not support this device
beinanchen said:
Same problem here.
Passing SafetyNet
Play Store get certification
But can't download on Play Store. Try installation apk from Netflix, App does not support this device
Click to expand...
Click to collapse
I just looked at the Netflix support page with instructions for side loading the app. It claims it is only compatible up to Android 7.1.2, so clearly the one on their site will not work anymore. They even say to contact them if you are certified, but I am guessing all they are going to ask you is about BL unlocking. To my question of the other user, are you running a custom kernel? I am sure Netflix sees a BL unlock if it is exposed. The only other thing you can do is try APKMirror. https://www.apkmirror.com/apk/netflix-inc/netflix/netflix-6-26-1-build-15-31696-release/
sliding_billy said:
I just looked at the Netflix support page with instructions for side loading the app. It claims it is only compatible up to Android 7.1.2, so clearly the one on their site will not work anymore. They even say to contact them if you are certified, but I am guessing all they are going to ask you is about BL unlocking. To my question of the other user, are you running a custom kernel? I am sure Netflix sees a BL unlock if it is exposed. The only other thing you can do is try APKMirror. https://www.apkmirror.com/apk/netflix-inc/netflix/netflix-6-26-1-build-15-31696-release/
Click to expand...
Click to collapse
yes, if my lock bl, I can download it from Play Store and working well, all the problem from Unlock bl
beinanchen said:
yes, if my lock bl, I can download it from Play Store and working well, all the problem from Unlock bl
Click to expand...
Click to collapse
Install a custom kernel. They all (as far as I know) hide the unlocked BL at this point.
sliding_billy said:
Install a custom kernel. They all (as far as I know) hide the unlocked BL at this point.
Click to expand...
Click to collapse
Try to install Proton Kernel, same problem. ?
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
sliding_billy said:
I just looked at the Netflix support page with instructions for side loading the app. It claims it is only compatible up to Android 7.1.2, so clearly the one on their site will not work anymore. They even say to contact them if you are certified, but I am guessing all they are going to ask you is about BL unlocking. To my question of the other user, are you running a custom kernel? I am sure Netflix sees a BL unlock if it is exposed. The only other thing you can do is try APKMirror. https://www.apkmirror.com/apk/netflix-inc/netflix/netflix-6-26-1-build-15-31696-release/
Click to expand...
Click to collapse
Already install, it's working now, but still can't update on Play Store
fysix said:
Flashed the vanilla boot.img then cleared cache/data for Play store and I'm still not certified. Any other suggestions?
Click to expand...
Click to collapse
beinanchen said:
Try to install Proton Kernel, same problem. ?
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
Already install, it's working now, but still can't update on Play Store
Click to expand...
Click to collapse
I wish I had more insight. I am using ElementalX and Magisk 19.3 with Play Store hidden. I actually factory reset my P3XL about a month ago to return to stock image from custom OS, and after all of the things mentioned was able to get Netflix from the Play Store and got the last update on June 14 (the one listed on the Play Store page). I'm not sure if something has changed since then. I am hesitant to uninstall and see if it is still there. I have 5 devices running Netflix including a P3 and P3XL. The other devices all are rooted with 19.3 as well and are running Nugget or Oreo with stock kernels. Just needed to get them to show certified and hide Play Store. The Pixels have been BL unlocked since the day they arrived last fall.
Fysix (and beinanchen if relevant)- I just read another post of your saying you are running Xposed. I mentioned that some Magisk modules could be an issue. I would disable all Magisk modules and reboot at least for testing.
sliding_billy said:
I would disable all Magisk modules and reboot at least for testing.
Click to expand...
Click to collapse
Currently I'm on a stock boot partition so no Magisk or Xposed is running. I did the little migration wizard from my old Pixel 2 to my Pixel 3 immediately after unlocking the bl and I remember Netflix being omitted then even with just the bootloader unlocked and no Magisk. I haven't had a chance to try ElementalX yet but I'm fairly optimistic that the kernel is ratting me out currently and ElementalX will fix it.
fysix said:
Currently I'm on a stock boot partition so no Magisk or Xposed is running. I did the little migration wizard from my old Pixel 2 to my Pixel 3 immediately after unlocking the bl and I remember Netflix being omitted then even with just the bootloader unlocked and no Magisk. I haven't had a chance to try ElementalX yet but I'm fairly optimistic that the kernel is ratting me out currently and ElementalX will fix it.
Click to expand...
Click to collapse
Either way, EX is a nice kernel. The EX Kernel manager is a really nice app and the dev deserves the financial support. He literally has that kernel updated normally before most folks have even installed their monthly Google update. I have separate copies on both of my Pixels. Plus, it beats the hell out of having to copy/flash the kernel manually. Let me know how it goes.
I have the same issue.
I'm on dirty unicorn with kirishakura kernel and magisk.
I'm passing safetynet thought and downloading the apk doesn't work as the app crash.
Edit: play store says I'm certified.
Same problem here.
Running a custom kernel that is based off of DU with some ElementalX cherry-picks. Rom is custom compiled AOSiP. Latest Magisk canary installed and passing SafetyNet. Only other thing I did was hack gms DB's to allow Google Pay to work. I'm also using Vanced YouTube.
sliding_billy said:
Either way, EX is a nice kernel. The EX Kernel manager is a really nice app and the dev deserves the financial support. He literally has that kernel updated normally before most folks have even installed their monthly Google update. I have separate copies on both of my Pixels. Plus, it beats the hell out of having to copy/flash the kernel manually. Let me know how it goes.
Click to expand...
Click to collapse
Tried ElementalX and it didn't make a difference
Settings > Security > Security update
Settings > Security > Google Play system update
There was a bug on these at launch that didn't allow Pixel 7's to update these...so when Displax updated his mod, these weren't in effect...
anyone have issues with SafetyNet passing with root after updating these?
I'm back to Pixel after a couple years off and I just want to be sure doing a Google Play system update is not the same as System update/OTA. Or is it? Can I do this update without worrying about losing root or anything? I guess what is the difference between a Google Play system update and a System update?
simplepinoi177 said:
There was a bug on these at launch that didn't allow Pixel 7's to update these...so when Displax updated his mod, these weren't in effect...
anyone have issues with SafetyNet passing with root after updating these?
Click to expand...
Click to collapse
Passing safetynet according to YASNAC after Play System update
My P7P downloaded 2 files for the Play System update. First 1 downloaded and installed. After the reboot, the update showed another file which I downloaded and updated.
Now shows Oct 1, 2022. Safetynet passes too.
xDanVitox said:
I'm back to Pixel after a couple years off and I just want to be sure doing a Google Play system update is not the same as System update/OTA. Or is it? Can I do this update without worrying about losing root or anything? I guess what is the difference between a Google Play system update and a System update?
Click to expand...
Click to collapse
You will not lose root. It is not an OTA, but it certainly feels like it! You will get 2 updates, one is 64Kb big, the next is like 60+Mb! So it feels like it, but it's not. I am able to confirm (after having roirraW "edor" ehT confirm) that you can do these and it will not affect root or safetynet passing.
xDanVitox said:
I'm back to Pixel after a couple years off and I just want to be sure doing a Google Play system update is not the same as System update/OTA. Or is it? Can I do this update without worrying about losing root or anything? I guess what is the difference between a Google Play system update and a System update?
Click to expand...
Click to collapse
Google Play System updates are not the same as an OTA/Monthly Security updates. They are part of the "newish" Google System Updates which includes Google Play System updates, Google Play Services updates and Google Play Store updates.
You won't lose root. Here's what is new in it.
What's weird is I just went to check and my rooted p7p says it's a nexus 6p. Is that normal?
Thanks y'all! This is what I thought but wanted to be sure.
wolfu11 said:
What's weird is I just went to check and my rooted p7p says it's a nexus 6p. Is that normal?
Click to expand...
Click to collapse
It is if you have Displax's SafetyNet Fix mod installed.
swieder711 said:
My P7P downloaded 2 files for the Play System update. First 1 downloaded and installed. After the report, the update showed another file which I downloaded and updated.
Now shows Oct 1, 2022. Safetynet passes too.
Click to expand...
Click to collapse
Strange how there was 2 updates in a row like that took the first update then I just happened to go back in to Settings > Security > Security update and it said there's another update there thought I was loosing it
My pixel 7 pro is on loop. After install one it wants the next and it keeps repeating. Two times was enough. They need to fix this play store nonsense
Idunnowhyimhere said:
My pixel 7 pro is on loop. After install one it wants the next and it keeps repeating. Two times was enough. They need to fix this play store nonsense
Click to expand...
Click to collapse
I had that. It took 4 or 5 retries before it stuck.
For those who updated, please check your Google Photos app, people on reddit complains that they have their photos duplicated.
silverkin said:
For those who updated, please check your Google Photos app, people on reddit complains that they have their photos duplicated.
Click to expand...
Click to collapse
nope fine here
that would make little sense why play services would cause photos to duplicate tho
silverkin said:
For those who updated, please check your Google Photos app, people on reddit complains that they have their photos duplicated.
Click to expand...
Click to collapse
No duplication here either. I updated the Play Services to October yesterday.
Let me ask the question here as I don't want to open a new thread.
I got my phone at 27/10 and ever since I'm being notified that there's a new security update, the size is 72.99MB.
Unfortunately I'm not able to install this and it annoys the hell out of me.
Is it possible that the upgrade fails as I've rooted the phone and I have the displax mode?
csupka91 said:
Is it possible that the upgrade fails as I've rooted the phone and I have the displax mode?
Click to expand...
Click to collapse
If it's a monthly security update (rather than a Google Play System update), then yes, being rooted can make it fail due to the fact it will likely fail the pre-OTA block verifications.
Having said that, some users have reported successfully updating even though rooted.
Lughnasadh said:
If it's a monthly security update (rather than a Google Play System update), then yes, being rooted can make it fail due to the fact it will likely fail the pre-OTA block verifications.
Having said that, some users have reported successfully updating even though rooted.
Click to expand...
Click to collapse
Thank you for your reply.
Could you please shed some light for me, what's the best way to unroot the phone? I've tried the "Recommended steps" from here: https://www.xda-developers.com/how-to-install-ota-updates-keep-root-google-pixel-phone/#recommended
Code:
Extracting the boot.img from the zip file
fastboot flash boot boot.img
fastboot reboot
But even after this, I still got root and the update wasn't successful
csupka91 said:
Thank you for your reply.
Could you please shed some light for me, what's the best way to unroot the phone? I've tried the "Recommended steps" from here: https://www.xda-developers.com/how-to-install-ota-updates-keep-root-google-pixel-phone/#recommended
Code:
Extracting the boot.img from the zip file
fastboot flash boot boot.img
fastboot reboot
But even after this, I still got root and the update wasn't successful
Click to expand...
Click to collapse
Those directions are incorrect. On the Pixel 7 series, it's the stock init_boot.img that needs to be restored, not the boot.img. You can try to install the update through Magisk's "Install to Inactive Slot" method which a couple of people said worked for them (others said it didn't) even though I didn't think Magisk was restoring the stock init_boot.img so I'm not quite sure how it worked for those people or just restore the stock init_boot.img and try to update again.
Code:
fastboot flash init_boot init_boot.img
Also, see this guide for all things Pixel 7, including on how to update each month.
Hi!
I have an issue and was wondering if anyone have a solution. Suddenly Google wallet stopped working, saying that my phone is not up to security standards. It worked fine until this Sunday.
I'm using beyondrom, magisk app (zygisk and hidden) with Universal safteynet fix v.2,4 and Shamiko v.0,6. I also have all Google services etc. in deny list.
Anyone have had the same issue and/or something to try to fix?
eddy92 said:
Hi!
I have an issue and was wondering if anyone have a solution. Suddenly Google wallet stopped working, saying that my phone is not up to security standards. It worked fine until this Sunday.
I'm using beyondrom, magisk app (zygisk and hidden) with Universal safteynet fix v.2,4 and Shamiko v.0,6. I also have all Google services etc. in deny list.
Anyone have had the same issue and/or something to try to fix?
Click to expand...
Click to collapse
What does Play Integrity Checker or TB Checker report for Play Integrity results?
V0latyle said:
What does Play Integrity Checker or TB Checker report for Play Integrity results?
Click to expand...
Click to collapse
Huh, actually only meets device and Basic Integrity, strong Integrity is red.
Any tips on what to do/check?
eddy92 said:
Huh, actually only meets device and Basic Integrity, strong Integrity is red.
Any tips on what to do/check?
Click to expand...
Click to collapse
Strong integrity will always be red on an unlocked bootloader. Basic and Device integrity are the only requirements, Wallet does not use Strong. If you don't already, enable DenyList on Wallet and GPay - make sure you expand and enable on all subprocesses. Then, clear Wallet data and reopen it.
I had this issue a few days ago and fixed it with this method.
V0latyle said:
Strong integrity will always be red on an unlocked bootloader. Basic and Device integrity are the only requirements, Wallet does not use Strong. If you don't already, enable DenyList on Wallet and GPay - make sure you expand and enable on all subprocesses. Then, clear Wallet data and reopen it.
I had this issue a few days ago and fixed it with this method.
Click to expand...
Click to collapse
I have tried this several times, even with installing the wallet app in between. Unfortunatley it does not work! I have no GPay app, just the Wallet one.
I have fixed several other apps with this method, but Wallet does not want to work with me
eddy92 said:
I have tried this several times, even with installing the wallet app in between. Unfortunatley it does not work! I have no GPay app, just the Wallet one.
I have fixed several other apps with this method, but Wallet does not want to work with me
Click to expand...
Click to collapse
If you're running the latest kdragon version of safteynet fix, try deleting the module and install the latest version of the safteynet fix by displax. I myself had problems sometime ago and this helped. Then clear everything again restart and it'll probably work.
erik2041999 said:
If you're running the latest kdragon version of safteynet fix, try deleting the module and install the latest version of the safteynet fix by displax. I myself had problems sometime ago and this helped. Then clear everything again restart and it'll probably work.
Click to expand...
Click to collapse
Hi, thanks for the tip. Sorry stupid question maybe, but where can i find Displax safteynet fix? When searching I can only find Kdrag0ns version. Even on Displax Github it seems to link to the Kndrag0n version.
EDIT: Sorry, nvm I found it! (Link if someone else is looking: https://github.com/Displax/safetynet-fix/releases)
Still does'nt work though
I just realised, with the latest beyondrom magisk got changed to magisk alpha, so you kinda have to go and re-hide the app and so on. Have you done that?
erik2041999 said:
I just realised, with the latest beyondrom magisk got changed to magisk alpha, so you kinda have to go and re-hide the app and so on. Have you done that?
Click to expand...
Click to collapse
I have not yet updated to BeyondROM 2.3, I am still on 2.2 BVL1 version (from december 22). I will update to version 2.3 when I can, then perhaps I can try these steps again. Meybe it can help.
I should not have to re-hide etc. since I didnt update, right?
Nope, sorry I thought you did. But that's probably the reason for why the wallet isn't working. In that case first update and go through all the steps, should work then. It's one of the reasons magisk got replaced by magisk alpha in the newest beyond rom version.
erik2041999 said:
Nope, sorry I thought you did. But that's probably the reason for why the wallet isn't working. In that case first update and go through all the steps, should work then. It's one of the reasons magisk got replaced by magisk alpha in the newest beyond rom version.
Click to expand...
Click to collapse
Excellent, I will try asap. Thanks for all help!!
eddy92 said:
I have not yet updated to BeyondROM 2.3, I am still on 2.2 BVL1 version (from december 22). I will update to version 2.3 when I can, then perhaps I can try these steps again. Meybe it can help.
I should not have to re-hide etc. since I didnt update, right?
Click to expand...
Click to collapse
If you're on a custom ROM you may need to use MHPC to spoof a valid device profile.
I had the same problem here, I managed to solve it by installing Magisk delta and Universal SafetyNet modded.