Database Info

Stuck at boot screen

Hi,
i've tried to format the data of my Honor 8 with TWRP. After that i stuck at the boot screen (honor 8 logo).
I did a factory reset then and after that i stuck at the "your device has been unlocked..." screen.
I also can't install any of my Backups i have made, cause i get an error "extractTarFork() process ended with ERROR: 255".
It seems like that i can't connect it to the computer anymore. //will test it with another computer tomorrow
What can i do now?
I had Nougat installed with TWRP recovery and phh 275 root
thx
edit: when i enter the recovery i'm getting an error "mount -o bind '/data/media' '/sdcard' process ended with ERROR: 127"

TomboIa said:
Hi,
i've tried to format the data of my Honor 8 with TWRP. After that i stuck at the boot screen (honor 8 logo).
I did a factory reset then and after that i stuck at the "your device has been unlocked..." screen.
I also can't install any of my Backups i have made, cause i get an error "extractTarFork() process ended with ERROR: 255".
It seems like that i can't connect it to the computer anymore. //will test it with another computer tomorrow
What can i do now?
I had Nougat installed with TWRP recovery and phh 275 root
thx
edit: when i enter the recovery i'm getting an error "mount -o bind '/data/media' '/sdcard' process ended with ERROR: 127"
Click to expand...
Click to collapse
You still have twrp?
Did you format data to f2fs? Try format it back ext4.
You have to downgrade to MM.
You can read whole post in here.
https://forum.xda-developers.com/honor-8/help/problem-downgrading-nougat-t3550015

faizalotai said:
You still have twrp?
Did you format data to f2fs? Try format it back ext4.
You have to downgrade to MM.
You can read whole post in here.
https://forum.xda-developers.com/honor-8/help/problem-downgrading-nougat-t3550015
Click to expand...
Click to collapse
yes i still have TWRP.
do i have to flash the recovery.img out of the update.app now?
and then the dload method?

TomboIa said:
yes i still have TWRP.
do i have to flash the recovery.img out of the update.app now?
and then the dload method?
Click to expand...
Click to collapse
No need, just press all 3 buttons and it will reset everything

faizalotai said:
No need, just press all 3 buttons and it will reset everything
Click to expand...
Click to collapse
it says "software install failed - imcompatibility with current version..." .
i have B120 on my sd card
edit: after the rollback package the install is working now.
let's see it's still in progress

ok thank you very much !! my phone booted again.

TomboIa said:
ok thank you very much !! my phone booted again.
Click to expand...
Click to collapse
Nice .?

Hi, I have the same problem but your solution didn't work or maybe i didn't understood it. Anyway, when I start the recomery TWRP, i got a similar error code (127 instead of 255), I tried to format the data again but it didn't work too. I'm trying now to restore my phone with the original firmware of the honor 8, i don't know if it's a good idea!
If anyone can help, it would be very appreciate
Slein

Hanging during Boot animation

Hello, I would like some help since I got this device just yesterday.
I got it with the EMUI 4 Android 6.0 stock installed on it. Since there was no update for it I unlocked the bootloader installed twrp rooted and manually flashed EMUI 5 7.0. Everything worked fine.
I created a backup through TWRP and restored it succefully multiple times.
Then I installed the Meticulus TWRP (since I was told it is a prerequisite for the AOSP). I Flashed the AOSP but it stuck during the boot animation (30 minutes afterwards I powered it off).
I reflashed my old TWRP and tried restoring my backup. IT fails with the explanation "Cannot wipe /vendor" while at the top it says "Cannot mount /vendor (invalid argument)" "Cannot mount /product (invalud argument)".
Anyone has a clue how to fix this? Fastboot adb all works so there should be a way to boot into an OS properly?

Since AOSP was not booting i guess you forgot formatting /data partition to ext4... And did u Used Stock vendor and not openkirin ones ?
Gesendet von meinem Honor 6X mit Tapatalk

As said I have replaced the custom TWRP with the default one so I think this should not apply anymore?
The "cannot mount vendor/product" messages came from the default TWRP after I reflashed it again.
At the top it says "cannot mount /vendor" either so I guess that is the actual problem?
It would be nice to get teh AOSP up but I really want to be able to boot into something first honestly.
And did u Used Stock vendor and not openkirin ones
Click to expand...
Click to collapse
Can you please explain? When I flashed your ROM i was on your TWRP. Does this even matter anymore?
At best I would be able to restore my backup.

To me it appears to be caused by the vendor partition.
Is there any way I can manually create that through TWRP?

algg said:
To me it appears to be caused by the vendor partition.
Is there any way I can manually create that through TWRP?
Click to expand...
Click to collapse
Yes you can but not creating it through twrp, but flashing it by fastboot mode: this is because
image (.img) files needs to be flashed by fastboot mode to avoid any kind of problem.
So, you should look for the last version of stock firmware on which you was before going custom, like BLN-L21CXXXB368 for example; tell me your build number and I'll find the package for you. Then, extract from the UPDATE.APP (a very big file that contains every partition in your phone like recovery, vendor, data, ecc. - you'll find this file inside the zip archive that contains the downloaded update) the vendor.img using Huawei Update Extractor, and then flash it through fastboot mode using the command "fastboot flash vendor vendor.img".
Otherwise, you could rely on dload method to reflash a full update package, and this should really fix everything since that it'll be like a new and clean installation of the OS. Then, unlocking the bootloader again and reflash TWRP to finally restore your previous backup made when it was working would be the final step.
Feel free to ask for further help

Thanks for the reply first really appreciate it.
I got the device on EMUI 4 Marshmallow rooted it and unlocked the bootloader then installed the BLN-L21C185B140 which worked smoothly.
I used that update.zip and extracted into dload root folder and started the huawei recovery installer but it said "package not found".
I tried flashing something to vendor before with fastboot but it said command not allowed.
Maybe I am doing something wrong?

algg said:
Thanks for the reply first really appreciate it.
I got the device on EMUI 4 Marshmallow rooted it and unlocked the bootloader then installed the BLN-L21C185B140 which worked smoothly.
I used that update.zip and extracted into dload root folder and started the huawei recovery installer but it said "package not found".
I tried flashing something to vendor before with fastboot but it said command not allowed.
Maybe I am doing something wrong?
Click to expand...
Click to collapse
Latest build on Nougat after the update was BLN-L22C185B140 so? If yes, the package that you need to download is that one. Unluckily i can't help about dload method, i never had fortune using dload because package verification always failed at 5%, i tried every combination but without success.
Command not allowed while flashing vendor image... but flashing others, like recovery or boot.img is allowed? If yes, i don't know what's causing this sorry... I'm sure that my friend @shashank1320 could surely help more than me about how using dload method correctly. Check his signature, it should contain a guide on how to use it

RedSkull23 said:
Latest build on Nougat after the update was BLN-L22C185B140 so? If yes, the package that you need to download is that one. Unluckily i can't help about dload method, i never had fortune using dload, i never be able to using it successfully because package verification always failed at 5%.
Command not allowed while flashing vendor image... but flashing others, like recovery or boot.img is allowed? If yes, i don't know what's causing this sorry... I'm sure that my friend @shashank1320 could surely help more than me about how using dload method correctly. Check his signature, it should contain a guide on how to use it
Click to expand...
Click to collapse
For fastboot yes flashing recovery or boot do work but vendor does not. Maybe the ISO is corrupted somehow I will try it again on a different machine now with the tool.
The link you posted the dload method from is the one where I initially found it as well so yea.
Also it shouldn't matter what I install since the only thing I need is the actual vendor (and product?) partition to work. I have a functional backup just TWRP cannot create/mount the partitions. So even a way to just create them without any data would actually fix my problem (at least I hope so?)

When trying to use Fastboot to flash the vendor/product img I get remote: Command not allowed (yes my bootloader is unlocked) although I can flash the recovery without any problem.
The dload method does not work as said. I placed the extracted content of the update.zip into the dload folder but the software "cannot find" the package.

algg said:
When trying to use Fastboot to flash the vendor/product img I get remote: Command not allowed (yes my bootloader is unlocked) although I can flash the recovery without any problem.
The dload method does not work as said. I placed the extracted content of the update.zip into the dload folder but the software "cannot find" the package.
Click to expand...
Click to collapse
@RedSkull23, thanks for the tag mate.
 @algg, No need to flash the vendor image as you already had the stock vendor img.
Now what else you can try is to flash the stock recovery, boot to stock recovery, select factory reset and reboot. It should most probably fix the issue.
If not, reflash the TWRP, a regular TWRO available and not specific to elite or meticulous, but generic one given by OldDroid.
I hope you have downloaded the content for dload, if not, download these for B140.
Flash this via TWRP- http://update.hicloud.com:8180/TDS/...afnaf/update_data_full_BLN-L21_hw_meafnaf.zip
no further changes and Then use dload method for this file- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1756/g1755/v105054/f1/full/update.zip
Try above and provide feedback. This is what I could think of best possible way to have everything with all system app working.
If not, let me know and I will try to help further.

Hi, I thought I need the vendor image since TWRP (all versions) tell me "Could not mount/wipe vendor" and "Could not mount/wipe product" "invalid argument" for both.
I tried the factory reset before but it does not work. It stops at 23% then shows a red exclamation mark and just goes to the original screen with the 3 buttons (restart, shutdown and wipe).
I am currently trying to get it to recognize my sd card. But somehow it does not work through TWRP it just does not recognize the 8GB SD Card. Also I am currently on the TWRP I was before all of this happened (3.1 openkirin). Without the SD Card recognized I can't put the dload files for it on it and in turn I can't use the dload.
I mean technically it should very well be possible to fix the device since it isn't a real brick and even TWRP and Fastboot load. It's just that all those little things are somehow ruining it.

Edit: I will get a new micro sd for some reason this one does nt work. I'll say then whether the flash then dload worked.
@shashank1320
Mind explaining why I should first use TWRP to flash something and then on top of it use dload?
And why those specific files?

algg said:
Edit: I will get a new micro sd for some reason this one does nt work. I'll say then whether the flash then dload worked.
@shashank1320
Mind explaining why I should first use TWRP to flash something and then on top of it use dload?
And why those specific files?
Click to expand...
Click to collapse
Sure, let me explain.
The first file is the data file which will install few systems apps like file manager, updater, themes, clock, fm radio etc. This will work via dload as well but the installation time is around 3-7 seconds so, over the course of time and flashing few times, i realised that these PV files cannbe flashed via TWRP and it works perfectly fine specific to PV files( twrp won't supoort other stock zips). We foash this first so that it updates your buld number and also does not replace the recovery with stock (as if you flash the main update zip first, it will replace with stock recovery so flashing the 2nd file will be quick but with unstable system apps, sometime).
Now we flash the main zip file with update.app via dload and it Install the main firmware for boot, vendor, recovery, system, usrdata etc.
Hope this explanation helps, if not let me know and I will rephrase myself.

It does help. I did all of this and now in the dload app I get "Software install failed Incompatibilty with current version please download the correct update package".
When I flashed the zip you linked me with TWRP it said "cannot mount /data /vendor /product". Appearently data cannot be mounted since it is encrypted.
Any clue as to what I am doing wrong? Or is this device now a real brick with functioning recovery but without OS?

Is there any way I can "debug" what is going on while the boot animation is playing?
What is confusing me is that the boot animation plays just normal but it simply does not continue to the actual OS.

algg said:
It does help. I did all of this and now in the dload app I get "Software install failed Incompatibilty with current version please download the correct update package".
When I flashed the zip you linked me with TWRP it said "cannot mount /data /vendor /product". Appearently data cannot be mounted since it is encrypted.
Any clue as to what I am doing wrong? Or is this device now a real brick with functioning recovery but without OS?
Click to expand...
Click to collapse
Not bricked..its just Data is not mounted or encryption. Should never encrypted it. NVM.
Do one thing, boot to twrp recovery. Try flashing and get error, then go to main TWRP page and click on reboot, select recovery out of 4 options( power off, system, bootloader and recovery). It will boot to recovery, now try flashing it again and see. Most if the time it helps.
Else, go to main page, select wipe, click on format rather than wipe here, it will prompt for typing Yes to confirm. Biit to recovery from main twrp page ( as mentioned above). And try this same thing of formatting data couple of times and then flash the zip and then dload.
I know these are tedious steps but inhave revived my device many a times with all these tricks after some efforts.
Good luck

YAY it works.
Just to recap what I did:
I flashed your thing first through TWRP tried to flash your other link with dload (which did NOT work)
Then I flashed the thing (emui5 Android 7 for Europe) through TWRP played in my old backup of exactly this through TWRP cleared dalvik & cache.
Then I waited 20 minutse and now it started.
Really thanks to all of you very nice people here. I would be very baffled if it wasnt able to repair the device since Fastboot and Recovery still work.
But Huaweis recovery is beyond terrible.

algg said:
YAY it works.
Just to recap what I did:
I flashed your thing first through TWRP tried to flash your other link with dload (which did NOT work)
Then I flashed the thing (emui5 Android 7 for Europe) through TWRP played in my old backup of exactly this through TWRP cleared dalvik & cache.
Then I waited 20 minutse and now it started.
Really thanks to all of you very nice people here. I would be very baffled if it wasnt able to repair the device since Fastboot and Recovery still work.
But Huaweis recovery is beyond terrible.
Click to expand...
Click to collapse
It is terrible indeed. Glad your phone working.
Thanks to @RedSkull23 for tagging, else I may have not responded as he was already involved and was helping as usual.:good:

algg said:
Really thanks to all of you very nice people here. I would be very baffled if it wasnt able to repair the device since Fastboot and Recovery still work.
But Huaweis recovery is beyond terrible.
Click to expand...
Click to collapse
I'm happy for you man, indeed it would be so bad, especially because you got this device 3 or 4 days ago if i didn't read bad, anyway what matters is that now it works. Are you able to restore the previous backup through TWRP now? (But before trying... Make a backup of your actual OS )
shashank1320 said:
It is terrible indeed. Glad your phone working.
Thanks to @RedSkull23 for tagging, else I may have not responded as he was already involved and was helping as usual.:good:
Click to expand...
Click to collapse
Are you joking man? I just tagged you for more help, but practically you helped him in everything, not me; I'm sure that you would noticed the thread and helped as always even without my tag, i just speeded up things for being helpful to algg.
algg, I'd like to apologize myself; i didn't vanished after tagging shashank, today i just was at work and obviously i was busy for help, but as i saw with pleasure he already helped you to restore your OS and that was the objective. Nice one, guys!

honor 8 cant install any firmware and doesn't boot

hello iv been trying to flash emui 5.0 firmware but i always get the same error when i flash the system.img it says FAILED (remote: sparse flash write failure)
and when i tried to flash the cust.img i get FAILED (remote: partition error). so like you figured i damaged the partition
i tried to wipe cache, format data but still doesn't work to flash the system.img and the cust.img but the boot and recovery images are fine to flash.
i also tried the dload method with no luck. so it started of when i updated to nougat 7.0 emui 5.0 from emui 4.1 marsmallow 6.0.1 it didn't update properly and i got some other version
with only google voice input, and crashed. so i decided to flash it manually instead in fastboot but before i flashed i went in to twrp and wiped everything and formated the data.
then i flashed the boot,recovery,cust,system images from the update.app to emui 5.0 for my device but then i damage my partition and got stuck on a boot loop. after that i went
in twrp and wiped everything again flashed the images again but then system and cust img failed errors above. would appreciate any assistance thank you.

are you able to flash any custom ROM?
Try booting to TWRP from TWRP and see if it makes any different instead directly wiping and booting.

shashank1320 said:
are you able to flash any custom ROM?
Try booting to TWRP from TWRP and see if it makes any different instead directly wiping and booting.
Click to expand...
Click to collapse
well i tried to boot from Twrp to Twrp with no result
and i cant seem to flash anything in twrp because i always get (failed to mount)
i tried to flash emui 5.0 nougat firmware for my Frd-L09 but then i got a boot loop, so i went in twrp and wiped everything,
and went in to bootloader and flashed another twrp 3.0.2 wich didn't work it just stuck on your device is booting now...

Android6969xd said:
well i tried to boot from Twrp to Twrp with no result
and i cant seem to flash anything in twrp because i always get Failed to mount '/cust ' (invalid argument)
Failed to mount ' /vendor (invalid argument)
Failed to mount '/product (invalid argument)
i tried to flash emui 5.0 nougat firmware for my Frd-L09 but then i got a boot loop, so i went in twrp and wiped everything,
and went in to bootloader and flashed another twrp 3.0.2 wich didn't work it just stuck on your device is booting now...
Click to expand...
Click to collapse
..

Solution for that
Brother Use Dc phoneix tool... It can flash the firmware into the device in any condition whether its bricked or both frp and bootloader locked.. And its a awsome tool to repair the phone.... Yesterday i have tried it on my phone too.... Flawlessly it worked... But its a paid tool... I bought 3 days licence to repair my phone... Yesterday only i bought the license and still 2 days left... If you wang you can ping me...
My WhatsApp no: +91 7587136151

prasanth.nitrr said:
Brother Use Dc phoneix tool... It can flash the firmware into the device in any condition whether its bricked or both frp and bootloader locked.. And its a awsome tool to repair the phone.... Yesterday i have tried it on my phone too.... Flawlessly it worked... But its a paid tool... I bought 3 days licence to repair my phone... Yesterday only i bought the license and still 2 days left... If you wang you can ping me...
My WhatsApp no: +91 7587136151
Click to expand...
Click to collapse
where do i buy it?

You can buy it from this link
(as iam a blocked member iam not able to post links in this thread... Just go to DC unlocker dot com and you can find the buy option)
DC-Phoneix +HCU timed licence is preferred for repairing of a bricked phone..
And detailed procedure has been given for every problem

prasanth.nitrr said:
You can buy it from this link
(as iam a blocked member iam not able to post links in this thread... Just go to DC unlocker dot com and you can find the buy option)
DC-Phoneix +HCU timed licence is preferred for repairing of a bricked phone..
And detailed procedure has been given for every problem
Click to expand...
Click to collapse
oh it was 19 euro dont have any money on my card, but if u could share your login to save my phone i would be very greatfull
Lol

No problem i will give you the logins...
Ping me on telegram
My username is : @acpdhruva
Dont panic its just a username lol..

prasanth.nitrr said:
No problem i will give you the logins...
Ping me on telegram
My username is : @acpdhruva
Dont panic its just a username lol..
Click to expand...
Click to collapse
do you have kik or a messenger you dont need to add phone number?
having a hard time to sign up without phone number hahah

Android6969xd said:
well i tried to boot from Twrp to Twrp with no result
and i cant seem to flash anything in twrp because i always get (failed to mount)
i tried to flash emui 5.0 nougat firmware for my Frd-L09 but then i got a boot loop, so i went in twrp and wiped everything,
and went in to bootloader and flashed another twrp 3.0.2 wich didn't work it just stuck on your device is booting now...
Click to expand...
Click to collapse
You need to flash the TWRP 3.1 for EMUI 5.0. Once you flash the correct file you can boot.
Do one thing, remove USB and just press power key, it will boot to system.

Sorry my bad english.
If you connect the phone to PC, you can browse the internal or external storage?
If you do, or you have an sdcard, use it to dload mode to flash firmware. Use rollback package to revert back to an old firmware. And don't use twrp to flashing firmwares. Its wont work perfectly with nougat firmwares. Dont use it.
From twrp did not work for me. This method send my phone to bootloop and later just booting to erecovery, or stay a permanent bootloop. TWRP gone and just the dload method works 100 percentage.

Mumtaz77 said:
Sorry my bad english.
If you connect the phone to PC, you can browse the internal or external storage?
If you do, or you have an sdcard, use it to dload mode to flash firmware. Use rollback package to revert back to an old firmware. And don't use twrp to flashing firmwares. Its wont work perfectly with nougat firmwares. Dont use it.
From twrp did not work for me. This method send my phone to bootloop and later just booting to erecovery, or stay a permanent bootloop. TWRP gone and just the dload method works 100 percentage.
Click to expand...
Click to collapse
yes i have access to internal storage and i tried the dload method with my sdcard maybe it only work with micro sd?

shashank1320 said:
You need to flash the TWRP 3.1 for EMUI 5.0. Once you flash the correct file you can boot.
Do one thing, remove USB and just press power key, it will boot to system.
Click to expand...
Click to collapse
i flashed the correct twrp 3.1 but i still get Failed to mount '/cust ' (invalid argument)
Failed to mount ' /vendor (invalid argument)
Failed to mount '/product (invalid argument)

Android6969xd said:
i flashed the correct twrp 3.1 but i still get Failed to mount '/cust ' (invalid argument)
Failed to mount ' /vendor (invalid argument)
Failed to mount '/product (invalid argument)
Click to expand...
Click to collapse
Did you make any changes or flasshed custom ROM?

shashank1320 said:
Did you make any changes or flasshed custom ROM?
Click to expand...
Click to collapse
i tried to flash Lineage 14.1 but that lead to black screen when the device booted
and i tried changing the file system to ext2 back to ext4

Android6969xd said:
i tried to flash Lineage 14.1 but that lead to black screen when the device booted
and i tried changing the file system to ext2 back to ext4
Click to expand...
Click to collapse
Tried dload to restore the phone?
or can go to TWRP and then wipe section, select partition and repair it. and then try the things you want to do

shashank1320 said:
Tried dload to restore the phone?
or can go to TWRP and then wipe section, select partition and repair it. and then try the things you want to do
Click to expand...
Click to collapse
hi i tried the dload method and it worked had to buy a micro sd but it was worth it
i cant believe it myself nvm it failed at 99% thought it was a success
lol tried it a few more times and it worked actually
this was the firmware i used http://androidhost.ru/vb with the dload method

Android6969xd said:
hi i tried the dload method and it worked had to buy a micro sd but it was worth it
i cant believe it myself nvm it failed at 99% thought it was a success
lol tried it a few more times and it worked actually
this was the firmware i used http://androidhost.ru/vb with the dload method
Click to expand...
Click to collapse
best part is your efforts paid and you restored your phone.

Stuck in "Your device has been unlocked and can't be trusted" screen.

Hi everybody, I've been trying to unlock root on my Honor 6x BLN-L21 with Android 7 EMUI 5 (updated from Android 6) and I found myself following this guide. At first something went wrong as I got this error: "failed to mount /system (Invalid argument)", so I went under Advanced Wipe section of TWRP 3.1.1.0 and changed system partition format from EXT4 to FAT and then back to EXT4, and it solved. The installation of SuperSU didn't show any error message but as soon as I reboot my mobile from that screen, I get the screen in the title. Of course it won't let me run any update, meaning Volume UP + Volume Down + Power would just let me stick in the "Honor" blue screen with no progress showing. I need help to solve, thanks in advance.
PS: The only thing I get is: "No OS installed!". I'm astonished....

Use this guide to fix your phone. If you have any questions about the steps just ask.
https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240
TIP: If the version number you download wont flash using dload then try a lower version. For example. Even though my phone was on BLN-L24C567B366 when i messed it up i could only flash the BLN-L24C567B360 files. I updated once the process was complete.
Tip 2: Instead of Super Su. Try magisk instead. It allows you to root your phone and still use apps that refuse to work on rooted devices(pokemon go for example but theres many more.) You simply flash magisk with twrp and install the magisk manager apk. Everything is here. https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

This is gonna fail for sure, as every kind of update I try using dload method will permanently stick at 5%.
EDIT: I could solve installing via TWRP this custom ROM.

Baffol2asta said:
Hi everybody, I've been trying to unlock root on my Honor 6x BLN-L21 with Android 7 EMUI 5 (updated from Android 6) and I found myself following this guide. At first something went wrong as I got this error: "failed to mount /system (Invalid argument)", so I went under Advanced Wipe section of TWRP 3.1.1.0 and changed system partition format from EXT4 to FAT and then back to EXT4, and it solved. The installation of SuperSU didn't show any error message but as soon as I reboot my mobile from that screen, I get the screen in the title. Of course it won't let me run any update, meaning Volume UP + Volume Down + Power would just let me stick in the "Honor" blue screen with no progress showing. I need help to solve, thanks in advance.
PS: The only thing I get is: "No OS installed!". I'm astonished....
Click to expand...
Click to collapse
Use team mt multi tool
Provide required file from update.app

siddhrsh said:
Use team mt multi tool
Provide required file from update.app
Click to expand...
Click to collapse
I had solved already (look at the previous EDIT). Thanks anyway.

Phone won't boot and can't do much from TWRP

Hi !
I installed TWRP to root my honor view 10 3/4 weeks ago.
Today I installed an update. And since then, the phone won't boot past TWRP (which I can access) or Huawei eRecovery mode.
When I land in the eRecovery mode it offers me to shutdown, reboot, or connect to wifi and do a factory reset. When I attempt the factory reset it tells me that downloading package info failed.
I tried to do a reset from TWRP without success gives me ERROR 9. I also tired to install the stock rom (update.zip) from TWRP and I also get ERROR 9.
I'm a complete noob when it comes to phones. Anyone have an idea of a solution ?
Thank you for reading !

Get a microsd card flash Dload file

aditya desai said:
Get a microsd card flash Dload file
Click to expand...
Click to collapse
Tried and it tells me system installation failed, maybe I have the wrong file ?
Thanks for your help!

ouamakavoula said:
Tried and it tells me system installation failed, maybe I have the wrong file ?
Thanks for your help!
Click to expand...
Click to collapse
Whats your model, if it is L09 then get the stock ramdisk image from magisk thread in development section and also search for recovery image. Flash it via fastboot and boot normally.
Never ever try ota on rooted phone.

shashank1320 said:
Whats your model, if it is L09 then get the stock ramdisk image from magisk thread in development section and also search for recovery image. Flash it via fastboot and boot normally.
Never ever try ota on rooted phone.
Click to expand...
Click to collapse
My model is L09, I flashed the stock ramdisk image and now I can no longer get into TWRP but I am unsure of what to do now ?
Thanks

ouamakavoula said:
My model is L09, I flashed the stock ramdisk image and now I can no longer get into TWRP but I am unsure of what to do now ?
Thanks
Click to expand...
Click to collapse
Able to boot to system now? You cam always flash twrp from fastboot. Avoid as of now and boot to stock rom first

shashank1320 said:
Able to boot to system now? You cam always flash twrp from fastboot. Avoid as of now and boot to stock rom first
Click to expand...
Click to collapse
When I try to boot the phone it displays the message that the phone in unlocked and should no be trusted, it shows the honor booting screen and after a few seconds shuts down and the process is repeating.
If i try to press the volume up key when booting it takes me to huawei eRecovery where I can either shutdown the phone or download recovery but it fails everytime.
Thanks

Try flash the No check recovery, boot into and wipe cache. Then reboot
Powered by View 10

Try this
1. Flash stock ramdisk img
2. Flash stock recovery img
3. Reboot to recovery with button combination ie; power and vol down together
4. Wipe data and cache
5. Reboot.
Hopefully it'll work if it doesn't flash system.img after 1 & 2 steps and follow the next steps

Hi please specify model
And what update you installed...
If the update was genuinely meant for phone I believe a data and cache partation format should fix this..
I hope you are atleast seeing the honor bootscreen...
Specify model so that we could point you to correct system.img
Also did twrp gave any errors formatting cache memory?

same here
BKL-L09