Hi Guys,
I have managed to get my Android Head unit stuck on the bootscreen....
I was busy to get root acces on the unit which look like it succeeded. But sadly enough I update the binaries of SuperSU.
This resulted a head unit which gets stuck on the bootscreen.....
It is a Dasiata PX5 with 2g ram and 16gb rom memory. I know Hotaudio has a few posts with updates / files in it.
Is that the only way to revive the unit ? and if so which files need to be installed? the MCU or the System update?
I managed to get in to the recovery menu so I think there is still hope.
Aussi said:
Hi Guys,
I have managed to get my Android Head unit stuck on the bootscreen....
I was busy to get root acces on the unit which look like it succeeded. But sadly enough I update the binaries of SuperSU.
This resulted a head unit which gets stuck on the bootscreen.....
It is a Dasiata PX5 with 2g ram and 16gb rom memory. I know Hotaudio has a few posts with updates / files in it.
Is that the only way to revive the unit ? and if so which files need to be installed? the MCU or the System update?
I managed to get in to the recovery menu so I think there is still hope.
Click to expand...
Click to collapse
You will need to reflash the system from recovery, whats your MCU?
Octane70 said:
You will need to reflash the system from recovery, whats your MCU?
Click to expand...
Click to collapse
ugh I tried updating with one of these files but it doesnt go past the verify the package part when installing new system package...
Now I am stuck in the recovery screen. Can I still fine out what MCU I have ?
Aussi said:
ugh I tried updating with one of these files but it doesnt go past the verify the package part when installing new system package...
Now I am stuck in the recovery screen. Can I still fine out what MCU I have ?
Click to expand...
Click to collapse
How about your specs of the unit? I believe it may say it in the top of the recovery?
Yeah sorry about that. I still have the link to the deal on AliExpress gonna find it in a second.
Attached is a photo of the unit in recovery mode
I have tried this update :
Blue UI HA_PX5_8.0_ota(20180705)
from this page on XDA
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
Now looking at the picture it is stating something with HCT instead of HA which mentoined in the 1 I downloaded
here is the link
https://www.aliexpress.com/store/pr...885.html?spm=2114.12010608.0.0.55d77540QOk2e9
Aussi said:
Yeah sorry about that. I still have the link to the deal on AliExpress gonna find it in a second.
Attached is a photo of the unit in recovery mode
I have tried this update :
Blue UI HA_PX5_8.0_ota(20180705)
from this page on XDA
https://forum.xda-developers.com/an...asaita-mcu-updates-rockchip-px5-octa-t3575155
Now looking at the picture it is stating something with HCT instead of HA which mentoined in the 1 I downloaded
here is the link
https://www.aliexpress.com/store/pr...885.html?spm=2114.12010608.0.0.55d77540QOk2e9
Click to expand...
Click to collapse
You could try the HCT ota on the same page you linked.
Octane70 said:
You could try the HCT ota on the same page you linked.
Click to expand...
Click to collapse
Chips,,,,,, tried that one too by SD card but that one also hangs on veryifing package :/
Could the device be bricked and not whiling to update anymore.....
Edit:
Pfeeeewww it worked seems that I just need alot more patience hehe.
although it is now a complete differente interface than which I had
Aussi said:
Chips,,,,,, tried that one too by SD card but that one also hangs on veryifing package :/
Could the device be bricked and not whiling to update anymore.....
Edit:
Pfeeeewww it worked seems that I just need alot more patience hehe.
although it is now a complete differente interface than which I had
Click to expand...
Click to collapse
Ah good to hear, same with mine when i updated to the newest firmware, i just started using ffc Launcher.
yes, takes along time in the verifying process, i usually walk away for 10 to 15 minutes.
Thanks for the support man ! Gonna try some rooting again tomorrow
Related
My G1, which has been converted to a JF ADP1.1, gave me the following popup message just now:
! A system update is available
-----------------------------
Holiday phone update 2 of 2: This is
a full system update. Your data and
settings will be preserved.
Update now Update later
I'm going to click "Update later" since I don't know exactly what this is.
I searched the XDA Dream forums for "Holiday phone" without finding anything, but if this is something previously discussed I'm sorry for the double post.
I have tried to attach a picture of the screen as well.
~Christopher
I went to Device Info, and clicked "Check for upgrade".
The result was:
Pending upgrade:
signed-holiday_devphone-ota-130444-debug.55489994.zip
Download status:
Completed (200): 45722649 of 45722649 bytes
Check-in status:
CHECKIN_SUCCESS
grenness said:
Pending upgrade:
signed-holiday_devphone-ota-130444-debug.55489994.zip
Download status:
Completed (200): 45722649 of 45722649 bytes
Click to expand...
Click to collapse
Does anyone know where in the phone file system these files go?
If I can find it, I can probably copy it to the SD card and then attach it to this thread.
~Christopher
so this update is only for ADP?
any idea what's new in it yet? or have you not updated?
i imagine it will just be RC33 for ADP, with Latitude etc.
only one way to find out
Meltus said:
so this update is only for ADP?
any idea what's new in it yet? or have you not updated?
Click to expand...
Click to collapse
I'm guessing this is for ADP only, since my phone (as far as Google knows) is an ADP (converted from a G1 using JesusFreke's ADP image) and the name of the .zip contains *devphone*.
No, I haven't proceeeded with the upgrade, I would like some other inputs from the forum first.
~Christopher
hrm, mine is saying its up to date when I hit the update checker. Guess i'll keep checking, as I would much rather stay on adp code and not run the tmobile.
this guy
has the same thing as you
http://andblogs.net/2009/01/new-adp1-images-leaked/
kash04 said:
this guy
has the same thing as you
http://andblogs.net/2009/01/new-adp1-images-leaked/
Click to expand...
Click to collapse
So it has the update for "Check for updates". Looks like it probably is the ADP1's answer to the RC33...
kash04 said:
this guy
has the same thing as you
http://andblogs.net/2009/01/new-adp1-images-leaked/
Click to expand...
Click to collapse
I appreciate the link, but JF-ADP1.1 is based off the images you linked to. Whatever the holiday update is is different.
Can you look in /cache and see if you see an update file? I'd love to get a copy. (Also, run 'logcat' and look for urls.)
I went ahead and accepted the update.
Took two reboots (one was probably the radio upgrade which I had installed several days ago), but now it's stuck on the pulsating android boot screen :-(
~Christopher
grenness said:
I went ahead and accepted the update.
Took two reboots (one was probably the radio upgrade which I had installed several days ago), but now it's stuck on the pulsating android boot screen :-(
~Christopher
Click to expand...
Click to collapse
RC33 takes -forever- to do it's first boot. On the order of 10 mins for some people.
Does 'adb logcat' show anything?
I left it on the table in front of me, I swear it took around 10 minutes before it proceeded with the boot-up, and now it seems to work fine. Has Google voice search and Latitute.
Don't know what's missing - looks like Sansdroid auto-rotate no longer works.
~Christopher
the download url is similar to rc OTA updates , just need to replace filename:
Code:
https://android.clients.google.com/updates/signed-holiday_devphone-ota-130444-debug.55489994.zip
I am the one that made a post on http://andblogs.net/2009/01/new-adp1-images-leaked/
I installed both updates and now have Google Latitude en Voice Search available. I tried to look at logcat but the information was not there anymore.
I made a post on the Google Android forum (http://groups.google.com/group/android-developers/browse_thread/thread/4fc696bd66b988f6#) and got responses from JBQ. But I doesn't make sense to me. I want to know if this update is an official one.
Is it possible to use this update directly on a ADP 1 with 1.0 image?
A friend of mine has not updated his ADP to 1.1 yet.
jcdekoning said:
I am the one that made a post on http://andblogs.net/2009/01/new-adp1-images-leaked/
I installed both updates and now have Google Latitude en Voice Search available. I tried to look at logcat but the information was not there anymore.
I made a post on the Google Android forum (http://groups.google.com/group/android-developers/browse_thread/thread/4fc696bd66b988f6#) and got responses from JBQ. But I doesn't make sense to me. I want to know if this update is an official one.
Click to expand...
Click to collapse
It is, it just might not be released yet.
cannot upgrade from JF1.41 RC33
after verifying update package...
message: failure at line 4
assert getprop ("ro.bootloader") =="0.95.0000"
Installation aborted.
Which image do I need to be able to flash?
endolin said:
after verifying update package...
message: failure at line 4
assert getprop ("ro.bootloader") =="0.95.0000"
Installation aborted.
Which image do I need to be able to flash?
Click to expand...
Click to collapse
It doesn't like the bootloader test. (And you won't be able to go from rc33 to adp1.1 anyway, since the userdata is different.)
If you are comfortable with the signing process, you can unpack it, remove the bootloader line from META-INF/com/google/....../update-script and resign it and it'll work. Alternately, give me a little time and I'll post one with no checks.
thanks for your quick reply.
i'm not familiar with the signing process, therefore I'd be glad to see a modified
release from you.
Disconn3ct said:
It doesn't like the bootloader test. (And you won't be able to go from rc33 to adp1.1 anyway, since the userdata is different.)
If you are comfortable with the signing process, you can unpack it, remove the bootloader line from META-INF/com/google/....../update-script and resign it and it'll work. Alternately, give me a little time and I'll post one with no checks.
Click to expand...
Click to collapse
http://andblogs.net/2009/02/new-adp1-update-official-with-google-voice-and-more/ has the download that does no system checks. So anyone should be able to apply it as update.zip
Hey guys,
i wanted to update my OPO with the last incremental update, but when i press update on the phone it restarts into TWRP and does nothing.
If i try to flash it from TWRP it gives me this error... (its the last TWRP).
What can i do?
Thanks guys
byte37 said:
Hey guys,
i wanted to update my OPO with the last incremental update, but when i press update on the phone it restarts into TWRP and does nothing.
If i try to flash it from TWRP it gives me this error... (its the last TWRP).
What can i do?
Thanks guys
Click to expand...
Click to collapse
First, you posted in the wrong section! This section is for development projects.
Also, have you installed a different version of CM12s? The zip is not flashing because it sees a modification to the firmware you're running, or it's a bad download .
Qrze said:
First, you posted in the wrong section! This section is for development projects.
Also, have you installed a different version of CM12s? The zip is not flashing because it sees a modification to the firmware you're running, or it's a bad download .
Click to expand...
Click to collapse
Damn, sorry about that, btw nope, a month ago i rooted the phone and installed TWRP and so wiped all, i also saw that it sees i have 4.4.2 but cant understand why...
PS. i cant change the section right?
byte37 said:
Damn, sorry about that, btw nope, a month ago i rooted the phone and installed TWRP and so wiped all, i also saw that it sees i have 4.4.2 but cant understand why...
PS. i cant change the section right?
Click to expand...
Click to collapse
Help is on the way, don't worry about the thread moving .
Can you screenshot your Settings->About Phone
Qrze said:
Help is on the way, don't worry about the thread moving .
Can you screenshot your Settings->About Phone
Click to expand...
Click to collapse
Thanks mate btw here it is
byte37 said:
Thanks mate btw here it is
Click to expand...
Click to collapse
Here try this, flash cyangen's recovery and try updating again. I don't know if that will do anything but it's worth a try!
It was told a zillion times. Either cyanogen recovery or download the full rom update instead of the delta OTA (full can be flashed via TWRP).
Look around the oneplus forums, I had the same problem. I managed to find the file and flash it with twrp without having to do the whole rom. The battery got better along with touch screen fixes
Sent from my A0001 using XDA Free mobile app
Done, thanks guys!
Essential one to stock firmware: together rooted system get TWRP 2.8.7.0.
Explain in great detail:
First specify the version of the firmware: Settings - About tablet - see on line Build number, for example, ***.20160216.*** (or 20160307, 20160429). In accordance with the version download the attached files.
From the thread Chainfire download TWRP / FlashFire installable ZIP, any choice - Stable, Beta or Latest. Archive ***-SuperSU-***.zip put in any useful folder in tablet.
Tablet is completely off, certainly from Android, simultaneously pressing power button and both volume "+" and "-" to boot your device in DNX Fastboot Mode (relevant notes on-screen will appear). Connect to computer that is already pre-installed the drivers (see attachment).
On the computer, launch the FLASH.bat from the extracted archive with TWRP. Wait until the script completes, devices disconnect.
In the tablet volume key to select "Recovery Mode" and power button to reboot the device in TWRP.
In TWRP to install the archive with superuser: Install - select the file - Swipe to Confirm Flash - Reboot system.
That's all, folks! © Disney
In addition TWRP installs insecure boot.img with screen density to 280 dpi.
Credits
@Chainfire for superuser;
@mirek190 for permission to use his fantastic flash tool (I changed it a bit for the installation TWRP);
thanks to Dani Basabe for sharing TWRP-2.8.7.0_teclast_x98pro-b2 (details see here)
and thank me for the work done.
Download
Intel drivers
twrp_0216
twrp_0307
twrp_0429
twrp_0531
twrp_remix_1.0.5(v5_7)
twrp_remix_1.0.5(v7)
twrp_0706
twrp_0729
My tablet is 20160324. Which version of twrp must I use?
perama said:
My tablet is 20160324. Which version of twrp must I use?
Click to expand...
Click to collapse
Interesting question. I don't see this firmware version in the official and not official sources. The problem isn't TWRP - it's the same everywhere - but in unlocked boot.img. I'm unable to recommend anything, I have no boot.img 20160324.
Please look at the screen shot from my tablet.
i bought it from GearBest.
Can I try all the versions you have uploaded to find out which one will work? Or I will damage my tablet this why?
perama said:
Please look at the screen shot from my tablet.
i bought it from GearBest.
Can I try all the versions you have uploaded to find out which one will work? Or I will damage my tablet this why?
Click to expand...
Click to collapse
Yes, do you have Onda CH - cht_cr_mrd_w. Take any set, but remove from it the boot.img, install TWRP and make a backup of the boot.img and here put, please.
I have a feeling that the Chinese are a hundred variations of iron made.
Thank you very much for helping me!
You mean, first to delete the file "boot.img" from folder "rom", then to run "flash.bat" to install "TWRP recovery" only and finally to make a backup of my "boot.img" and upload it here?
Without unlocked "boot.img" I can't make my tablet rooted?
perama said:
Without unlocked "boot.img" I can't make my tablet rooted?
Click to expand...
Click to collapse
You can try to flash SuperSU without unlocked boot - I havn't to get root access without changing it. But all of a sudden? I followed the path blazed by Teclast and Cube.
perama said:
You mean, first to delete the file "boot.img" from folder "rom", then to run "flash.bat" to install "TWRP recovery" only and finally to make a backup of my "boot.img" and upload it here?
Click to expand...
Click to collapse
Yes.
I installed TWRP and then booted to recovery. I backed up "boot.img" but then the tablet turned off by its own!
When I tried to turned it on again to Android, it keeps stay to 'Intel" logo for ever!
I don't know what to do! Please help me!
It boots to Windows without problem.
I manage to install the 0531 version using your instructions !
Everything works perfect including the sound!
Now I will try to root my device using your instruction above.
I will let you know... Thank you very much for your help!!!
I manage to root my tablet.
Everything is working fine now!
Thank you very much ViAlexSt! You are a life saver!
Mine has a 20160323 version! I think we are being played with.... Those numbers are a lot of versions!
What should I do? Perhaps the same as perama? I want to do a nandroid backup first, naturally.
Any suggestions?
pouskidis said:
Mine has a 20160323 version! I think we are being played with.... Those numbers are a lot of versions!
What should I do? Perhaps the same as perama? I want to do a nandroid backup first, naturally. Any suggestions?
Click to expand...
Click to collapse
I don't know whether to read this topic anyone else besides me, but I find it difficult to answer unequivocally. If you are not afraid - try to put the firmware 0531. And then TWRP.
I just wanna root the damn thing...
I already got i2c HID Device data failure once, just 2 days after I bought it.
Had to open the case and fix it, so yes, I am prete much afraid...
Is this 0531 version English f/w with no chinese? So, it just needs rooting?
Thanks ViAlexSt for all the help you provide us.
pouskidis said:
Is this version English f/w with no chinese?
Click to expand...
Click to collapse
Here's what Chinese maybe? Here installation packages with the insecure boots and TWRP for the flashing of the SuperSU.
pouskidis said:
I already got i2c HID Device data failure once, just 2 days after I bought it.
Had to open the case and fix it, so yes, I am prete much afraid...
Click to expand...
Click to collapse
The installation package must match the version of existing firmware.
ViAlexSt said:
Here's what Chinese maybe? Here installation packages with the insecure boots and TWRP for the flashing of the SuperSU.
The installation package must match the version of existing firmware.
Click to expand...
Click to collapse
So, you suggest to wait for someone with my frimware to post it?
Also, did you say that v0531 is English with no Chinese programs? Sorry, I did not understand correctly...
pouskidis said:
So, you suggest to wait for someone with my frimware to post it?
Click to expand...
Click to collapse
I don't know what version of firmware you have installed. You can of course try to install the most recent version - 0531, but may lose sound if the modification of iron is not adequate. Look at the serial number on the back cover: if it in the form .....G4V7...... - you can safely install 0531.
pouskidis said:
Also, did you say that v0531 is English with no Chinese programs? Sorry, I did not understand correctly...
Click to expand...
Click to collapse
Firmware version 0531 international, with pre-installed gapps and no Chinese, but firmware is discussed in another topic Here, only the activation of root access.
ViAlexSt said:
I don't know what version of firmware you have installed. You can of course try to install the most recent version - 0531, but may lose sound if the modification of iron is not adequate. Look at the serial number on the back cover: if it in the form .....G4V7...... - you can safely install 0531.
Firmware version 0531 international, with pre-installed gapps and no Chinese, but firmware is discussed in another topic Here, only the activation of root access.
Click to expand...
Click to collapse
I do have a v7 model... So I can proceed I guess. Sorry for the off topic, I just thought I would do a nandroid backup/root first. But installing 0531 from the start somehow seems safer?
Thanks
pouskidis said:
I do have a v7 model
Click to expand...
Click to collapse
G4 or G3 revision? If G4, then any available firmware will do. With G3 harder - there may be issues with wake tablet from sleep.
pouskidis said:
I just thought I would do a nandroid backup/root first. But installing 0531 from the start somehow seems safer?
Click to expand...
Click to collapse
Any firmware version will not make the tablet a brick. The only question is the presence of bugs: sound, sleep, overheating...
Look at the messages of реrama: he set TWRP with no boot, even made a backup, but without unlocking boot, the tablet doesn't start. He had to flash the version 0531, which, however, fit perfectly under his revision of "iron".
I have G4v7 revison. I guess I am good to go. I don't want any overheating problems, like "Throttling Brightness due to Thermal event" problems I had with Onda V919 Air 3G 64GB Intel Z3735F.
I had themal problems and shutdowns and was forced to return the product...
EDIT: I managed to root it after installing the PERFECT 0531 EN firmware.
The tablet is PERFECT now!
Thanks ViAlexSt!
I always get "failed to get partition boot".
I think there is an error in fstab.
When I manage to run TWRP, it fails to mount /data.
Any ideas?
V919 Air CH, 64 GB Android 5.1
oz42 said:
I always get "failed to get partition boot".
I think there is an error in fstab.
When I manage to run TWRP, it fails to mount /data.
Any ideas?
V919 Air CH, 64 GB Android 5.1
Click to expand...
Click to collapse
Hmm, interesting... While no specific ideas. I (and not only) have everything working. What version of firmware? Script when you install TWRP fulfills completely, without any errors? It's possible that not removed the OEM lock. Try to put the checkboxs in "Developers section" in "Settings".
InoHello everyone.
It has been a long time since my last post....
I bought my HTC U11 128GB/6GB last August and I find it awesome. Since the announcement of the Oreo update being rolled out, I became impatient to try it. I checked and checked for updates... but nothing. Right now it's running Android 7.1.1, SW version 1.27.400.21, with the October 2017 security patch.
How can I find if there are other updates that I didn't receive? How can I find my model number? How can I force the updates?
Info: My phone is already unlocked (it's the first thing that I did after receiving it).
Edit: with Simple CID Getter I found out that my CID is HTC__060. Is it the DUGL/India model? If yes then I guess that the Oreo update didn't arrive yet?
Thank you in advance to anyone that can help me.
Samribi said:
InoHello everyone.
It has been a long time since my last post....
I bought my HTC U11 128GB/6GB last August and I find it awesome. Since the announcement of the Oreo update being rolled out, I became impatient to try it. I checked and checked for updates... but nothing. Right now it's running Android 7.1.1, SW version 1.27.400.21, with the October 2017 security patch.
How can I find if there are other updates that I didn't receive? How can I find my model number? How can I force the updates?
Info: My phone is already unlocked (it's the first thing that I did after receiving it).
Edit: with Simple CID Getter I found out that my CID is HTC__060. Is it the DUGL/India model? If yes then I guess that the Oreo update didn't arrive yet?
Thank you in advance to anyone that can help me.
Click to expand...
Click to collapse
There is unofficial update: https://forum.xda-developers.com/u1...u-firmware-t3612048/post74674442#post74674442 and https://forum.xda-developers.com/u1...u-firmware-t3612048/post75213806#post75213806 You can manually install OTA.
4squer said:
There is unofficial update: https://forum.xda-developers.com/u1...u-firmware-t3612048/post74674442#post74674442 and https://forum.xda-developers.com/u1...u-firmware-t3612048/post75213806#post75213806 You can manually install OTA.
Click to expand...
Click to collapse
Thank you very much. I will look at it.
Samribi said:
Thank you very much. I will look at it.
Click to expand...
Click to collapse
Please tell if it worked
dany xe said:
Please tell if it worked
Click to expand...
Click to collapse
I just did a backup. Downloading the first files to upgrade from 1.27.400.21 to 2.31.400.6 now. Do I have to flash all the files? OTA, recovery, boot and firmware? Or only the OTA zip is enough?
Edit:
I tried to install the OTA Zip with TWRP and it gives me an error message. I think I will wait until the official OTA arrives (hoping it doesn't take too long).
The wwe version has only just been updated so you'll probably get the update in a month or so once the carrier is happy with the release. My advice is to wait. Do not root and s-off for it.
Samribi said:
I just did a backup. Downloading the first files to upgrade from 1.27.400.21 to 2.31.400.6 now. Do I have to flash all the files? OTA, recovery, boot and firmware? Or only the OTA zip is enough?
Edit:
I tried to install the OTA Zip with TWRP and it gives me an error message. I think I will wait until the official OTA arrives (hoping it doesn't take too long).
Click to expand...
Click to collapse
It's OTA zip, you dont have to s-off or root, here you have guide how to install OTA: https://forum.xda-developers.com/showpost.php?p=72425224&postcount=5
4squer said:
It's OTA zip, you dont have to s-off or root, here you have guide how to install OTA: https://forum.xda-developers.com/showpost.php?p=72425224&postcount=5
Click to expand...
Click to collapse
I'm looking to the post, and (being S-OFF already) it says that I have to flash a Combined Full Wipe firmware and then the OTA. Does it mean that I will lose all my data?
You can try to connect through the VPN that allows to select server located in India.
Had exactly same problem as OP.
Solution with VPN worked for me. And phone updated to Software version 2.42.400.3
EugeniusD80 said:
You can try to connect through the VPN that allows to select server located in India.
Had exactly same problem as OP.
Solution with VPN worked for me. And phone updated to Software version 2.42.400.3
Click to expand...
Click to collapse
What kind of VPN did you use? What software?
Samribi said:
What kind of VPN did you use? What software?
Click to expand...
Click to collapse
I used NordVPN. They have servers in India.
Update download was a bit slow though.
Thank you very much. It is downloading now. Slow but at least I will have it. Thank you again.
EugeniusD80 said:
I used NordVPN. They have servers in India.
Update download was a bit slow though.
Click to expand...
Click to collapse
Downloaded the first time with VPN, tried to install it, but it didn't work (I had TWRP, and after reboot I got the message that the update was corrupted). I flashed the recovery from the Google Spreadsheet: https://docs.google.com/spreadsheet...EYtQ_tRcOSJ0vWcvk8a7TK8Hk/edit#gid=2137120377
using:
Code:
adb reboot download
and then:
Code:
fastboot flash recovery recovery_1.27.400.21.img
I checked for updates and it asked me to download it again, no VPN needed. Downloaded it and tried to install it (much faster). Phone restarted, update started, and after a few seconds I saw a black screen with a red triangle.. it looks the same as when it's in recovery mode.... Had to restart the phone again.
I'm trying again to download it and I'll check better if I can see the error.
Edit: It goes fast from 1% to 24%, then it stops at 24% for about 19 seconds and then black screen with red triangle...
Any idea what the problem could be?
Samribi said:
I checked for updates and it asked me to download it again, no VPN needed. Downloaded it and tried to install it (much faster). Phone restarted, update started, and after a few seconds I saw a black screen with a red triangle.. it looks the same as when it's in recovery mode.... Had to restart the phone again.
I'm trying again to download it and I'll check better if I can see the error.
Edit: It goes fast from 1% to 24%, then it stops at 24% for about 19 seconds and then black screen with red triangle...
Any idea what the problem could be?
Click to expand...
Click to collapse
Sorry, don't think I can be of any help here. Have almost no experience with this sort of things.
In my case I did not do any tweaking with the original OS.
First tried to explore any possible option to get it "official" way.
My only guess would be to try to roll back to the original state and to have no trace of tweaking.
EugeniusD80 said:
Sorry, don't think I can be of any help here. Have almost no experience with this sort of things.
In my case I did not do any tweaking with the original OS.
First tried to explore any possible option to get it "official" way.
My only guess would be to try to roll back to the original state and to have no trace of tweaking.
Click to expand...
Click to collapse
Yes, I will try to do a factory reset this weekend. If it's not working, I will try to follow the instructions on the other post to flash a RUU.
Edit: I did a factory reset, tried to update to Oreo, it still stopped at 24%. I flashed the latest RUU I could find on the spreadsheet, and then after 2 updates I'm finally on Oreo!!!
HTC u11 Oreo update received via WiFi 4 days ago
Hi,
I bought my phone three months back. Ever since the last update Version Name - WW18.0840.2106.86 my wifi and Hotspot just won't turn on.
I have been through the asus forum and seems like alot of customers are facing this issue.
One of them confirmed that even after replacing motherboard the issue persists. Others are facing air trigger issues after replacing the motherboard.
Just wanted to know if anyone here is facing similar issues.
DO let me know your thoughts on should I visit service center and Get my motherboard replaced or should I wait for the next update. My current Version Name - WW18.0840.2107.151
PS: My phone is not rooted
Thanks
I have not had these issues personally. I just updated to .151 last night though, so we shall see.
The general consensus is that the mobo needs to be replaced, and will most likely not get fixed with a software update. If it was correctable, a major issue like this would have forced a new FW update after .86 caused your initial problem.
You could always try flashing raw FW if you really want to tinker, but I doubt it will help. I would hit the service center and get the mobo replaced.
Good luck!
BILLYB187 said:
I have not had these issues personally. I just updated to .151 last night though, so we shall see.
The general consensus is that the mobo needs to be replaced, and will most likely not get fixed with a software update. If it was correctable, a major issue like this would have forced a new FW update after .86 caused your initial problem.
You could always try flashing raw FW if you really want to tinker, but I doubt it will help. I would hit the service center and get the mobo replaced.
Good luck!
Click to expand...
Click to collapse
Yup.. .86 update cause this. I just didn't want to change the motherboard,as it will change the imei of phone from what's on the box.
Thanks for your inputs though
I was helped by installing the karnel
do one thing i also got same issue ,what i do means i install twrp and wipe the system and after i install ota file after i reboot in slot b then every thing for fine for me ..
thieftime1980 said:
I was helped by installing the karnel
Click to expand...
Click to collapse
Really? I have same problem after update. It didn't allow me to turn on wifi. But if its sure that installing kernel would solve the problem I might give it a try
Would you elaborate your situation regarding this sir?
jaleel (jelly) said:
do one thing i also got same issue ,what i do means i install twrp and wipe the system and after i install ota file after i reboot in slot b then every thing for fine for me ..
Click to expand...
Click to collapse
HOW DID YOU INSTALL OTA FILE? VIA TWRP OR FLASH ALL?
TOYOBHUMAX said:
HOW DID YOU INSTALL OTA FILE? VIA TWRP OR FLASH ALL?
Click to expand...
Click to collapse
The ota files are installed right in system.
New firmware "keep root" WW-18.0840.2103.26
Okay so I went to the Asus website https://www.asus.com/supportonly/ROG%20Phone%205%20(ZS673KS)/HelpDesk_Download/ Got the latest firmware which is the most recent one for this month with the latest security patch. I remember doing this method...
forum.xda-developers.com
twistedumbrella said:
The ota files are installed right in system.
New firmware "keep root" WW-18.0840.2103.26
Okay so I went to the Asus website https://www.asus.com/supportonly/ROG%20Phone%205%20(ZS673KS)/HelpDesk_Download/ Got the latest firmware which is the most recent one for this month with the latest security patch. I remember doing this method...
forum.xda-developers.com
Click to expand...
Click to collapse
Nothing pops up
thieftime1980 said:
I was helped by installing the karnel
Click to expand...
Click to collapse
What kernel did you install?
https://forum.xda-developers.com/t/kernel-30-09-2021-android-11-kirisakura-1-2-0-for-asus-rog-phone-5-aka-anakin.4333363 / strona-5 # post-85712193
jaleel (jelly) said:
do one thing i also got same issue ,what i do means i install twrp and wipe the system and after i install ota file after i reboot in slot b then every thing for fine for me ..
Click to expand...
Click to collapse
Where did you install OTA file? Does Ota file install mean you in the home screen of the phone? Ota is in the main storage, right?
jaleel (jelly) said:
do one thing i also got same issue ,what i do means i install twrp and wipe the system and after i install ota file after i reboot in slot b then every thing for fine for me ..
Click to expand...
Click to collapse
How did you reboot to slot b? In twrp?
TOYOBHUMAX said:
How did you reboot to slot b? In twrp?
Click to expand...
Click to collapse
There is option in twrp check in reboot section
TOYOBHUMAX said:
Where did you install OTA file? Does Ota file install mean you in the home screen of the phone? Ota is in the main storage, right?
Click to expand...
Click to collapse
Twrp
TOYOBHUMAX said:
HOW DID YOU INSTALL OTA FILE? VIA TWRP OR FLASH ALL?
Click to expand...
Click to collapse
I use twrp for ota files
jaleel (jelly) said:
I use twrp for ota files
Click to expand...
Click to collapse
Hi thanks for the answer... How to install OTA files in twrp? You mean OTA files the one beginning with UL or WW
anybody found a real solution? i was fine and after i flashed a kernel later that day no wifi, I went bk to stock and no luck
chairman011 said:
anybody found a real solution? i was fine and after i flashed a kernel later that day no wifi, I went bk to stock and no luck
Click to expand...
Click to collapse
No one shares how lol. I guess theyre not here. Im struggling same problem too man
TOYOBHUMAX said:
Where did you install OTA file? Does Ota file install mean you in the home screen of the phone? Ota is in the main storage, right?
Click to expand...
Click to collapse
OTA files are the standard updates. There are a lot of how to guides that answer most of these questions, which may be why nobody is jumping up to walk you through it.
I wouldn't trust someone installing OTA files in TWRP because the system handles them already without any software. That is just asking for problems.
ROG Phone 5(s) Help Index
"Quick Filters" let you see all posts of a certain type. This can make finding posts easier, but what if a guide began as a "Question"? This thread aims to bridge that gap. You will find nearly all of the common things new owners are trying to...
forum.xda-developers.com
The link I posted earlier is included in that. Not sure why nothing showed up for it, but maybe you'll have better luck getting to it that way.
There's always a possibility it is a hardware issue. A lot of them have been SIM, Wifi, and Bluetooth issues. If you suspect a kernel issue, make sure you are following the instructions to restore. If you only flashed a boot, you didn't follow the instructions.