Database Info

twrp & Root & Mod for Ulefone Mix

Support page for ulefone Mix User-
we Need Some files to Root Ulefone Mix.
1. SP flash tools- https://spflashtool.com/
2. twrp Recovery- https://romprovider.com/2017/11/ulefone-support-twrp/
3. SuperSU- https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
other Support File-
Official Firmware- mod edit - link removed
no-verity-opt-encrypt-5.1.zip - https://androidfilehost.com/?fid=673368273298927206
Instructions-
First of all Flash twrp using SP flash tool
Don't Switch on phone flash no-verity-opt-encrypt-5.1.zip
then flash SuperSu.zip
Reboot System Now.

Is the 1st step not disabling oem lock in developer settings?

HypoTurtle said:
Is the 1st step not disabling oem lock in developer settings?
Click to expand...
Click to collapse
you can unlock with fastboot-
For new devices (2015 and later):
Code:
fastboot flashing unlock
For older devices (2014 and earlier):
Code:
fastboot oem unlock

XN Logos said:
you can unlock with fastboot-
For new devices (2015 and later):
For older devices (2014 and earlier):
Click to expand...
Click to collapse
For some reason no need to oem unlock (bootloader not locked properly??) so have twrp without needing to wipe data, but now remains the encryption problem as this trwp doesn't support it, I have compiled twrp for mtk in the past with encryption support but doubt I can recall what needed to be done

TWRP not working
When I install the TWRP recovery and start the phone with this mode to install the two files
1) no-verity-opt-encrypt-5.1
2) SuperSU-v2.82-201705271822
the phone does not see them and it is impossible to proceed further.
Furthermore, the operating system does not even start, so the original firmware must be replaced with the flash tool.
Has anyone found a solution to this inconvenience?
Thank you

mingariedd said:
When I install the TWRP recovery and start the phone with this mode to install the two files
1) no-verity-opt-encrypt-5.1
2) SuperSU-v2.82-201705271822
the phone does not see them and it is impossible to proceed further.
Furthermore, the operating system does not even start, so the original firmware must be replaced with the flash tool.
Has anyone found a solution to this inconvenience?
Thank you
Click to expand...
Click to collapse
1. Userdata is encrypted, and the TWRP here isn't compiled to be able to decrypt it. So you'll need an sdcard with those zips on it
2. The os won't start if it deems its been altered - that's partly what zip 1 is for.

Is there any custom roms for Ulefone Mix?

Qaaqqu said:
Is there any custom roms for Ulefone Mix?
Click to expand...
Click to collapse
No custom ROMs - I think there is a clone device [Panasonic Eluga C] so we have another stock ROM from them.
I haven't attempted porting anything yet, let alone building anything from source [a source built twrp should be trivial] - i've lost yet another hard-drive recently so light on diskspace & sdcards so not able to do much atm.
For completeness: stock ROM > http://ulefone.com/download/mix.html [newer than the one on needrom]
OTA > http://hwfotadown.mayitek.com/ota/r...NE_N_V0.6.9.1_S1712221514261911507/update.zip

Is this root method working?
Stock rom is located here Stock Ulefone Mix 4G Rom

when (android 8) Oreo for ulefone mix?

twrp and now?
Hello,
i have an old ulefone mix mt6750t with the screen damaged but still 90% working, i thought i would use it on android auto but i needed rooting.
So I informed myself a bit, go unlocked developer mode and usb, downloaded adb and twrp and magisk etc ...
I unlocked the bootloader from the settings then used adb and installed twrp which starts but asks me for the pass to decrypt, then I swipe and delete the encrypted data.
Then with adb sideload I install magisk 20 and check opt encript, but the phone always goes to twrp, it does not restart ... mmm and the orange mode message comes out but it should be normal ... someone knows how to go on to restart it normally and not with twrp?
Thank you

[ROM][STOCK][TWRP][27/06/18]TA-1060 Stock Oreo 8.1

Code:
Warning! any damage done to your device is not my fault, use at your own risk!
This zip should be used mainly if you wiped system for some reason and didn't back up, its TA-1060 May patch system image + kernel + vendor files
Unlocked bootloader required!
TWRP
1. Boot into TWRP
2. Format /data partition in TWRP
3. Use 'adb push ta_1060_oreo_may_18.zip /sdcard/' in windows/linux/mac
4. Go to sdcard in TWRP and flash ta_1060_oreo_may_18.zip
5. Reboot to bootloader
6. use 'fastboot flash recovery recovery.bin' (Link bellow)
7. Optional: fastboot oem lock
8. reboot
9. on boot you will get encryption, click on the reset button when android loads
10. You will reboot into recovery then back into system, done
Fastboot
1. Extract zip file
2. flash system.img, boot.img, vendor.img in fastboot
3. fastboot reboot
Links:
Stock ROM zip May
Recovery image
Good luck
XDA:DevDB Information
[ROM][STOCK][TWRP][27/06/18]TA-1060 Stock Oreo 8.1, ROM for the Nokia 1
Contributors
sooti
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Created 2018-06-27
Last Updated 2018-06-27

So we can flash either through TWRP or Fastboot right?

Zeenat11 said:
So we can flash either through TWRP or Fastboot right?
Click to expand...
Click to collapse
I haven't tested fastboot but it should work. TWRP works 100%

Thank you very much, you are a life saver!!
I was stuck in a TWRP loop.
I tried flashing through TWRP but it didn't work but the fastboot method worked like a charm!
My phone is running again.

Thank you very much.
Is there any userdata.img available?

alexstarc said:
Thank you very much.
Is there any userdata.img available?
Click to expand...
Click to collapse
Nope but do you really need it? just format in fastboot or TWRP.

sooti said:
Nope but do you really need it? just format in fastboot or TWRP.
Click to expand...
Click to collapse
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.

alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
I wrote in the instructions...
If you get a password just enter a random one, then it will ask you to wipe the device, click ok and it will reboot to recovery and then wipe userdata and boot fine.
just make sure you flash the recovery.bin and not twrp before you wipe

alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
Same happened to me. I solved it by a hard reset via the stock recovery.
Make sure you flash the recovery.bin like Sooti said.
Wiping through twrp doesn't work.

Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs

A little warning.
It looks like the recovery.bin I took from another nokia 1 device doesn't match the checksum check which causes a failed during ota updates, please only flash this rom if you soft bricked your device.
If anyone can get me TA-1060 stock recovery image that should solve it. for now you can't update the phone until a fix is found

I have Nokia Ta 1066. Will this rom work on mine? Also I read somewhere Ta 1060 is single sim variant. What about the second sim?
Has anyone with TA 1066 tried it?

Thanks. Both methods work fine. Don't ask how I found out.....

Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...

coolboyforeva said:
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
Click to expand...
Click to collapse
I don't have stock recovery from our device i have from another variant of Nokia 1

Hey guys i have a TA-1056 and after unlocking bootloader and flashing TWRP it booted to recovery and came up encrypted, after looking around the only solution was to format data, afterwards when rebooting it always boots to recovery, i tried flashing this zip and i get the same issue and i can't find the stock ROM for the 1056 anywhere online, can anyone help me out? i really appreciate it

Kurajmo said:
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
Click to expand...
Click to collapse
got any custom roms?

Does Nokia 1 support DT2W?

Sir, is that possible to get a stock rom of TA 1056 ?
I have searched everywhere but whole thing available over net just left my phone bricked. All i need is a working rom source. Even if that’s a custom rom too to flash via sp flash tool. Thanks in advance

Can any please repost the firmware , the link isn't working

[RECOVERY][discovery] TWRP Touch Recovery [OFFICIAL]

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
DOWNLOAD: https://twrp.me/sony/sonyxperiaxa2ultra.html
BUGS:
If you have found a bug, please consider posting it to our github issues log and then I'll report to Dess_Troy. If you have a significant problem that cannot be answered in this thread, your best bet is to PM Dees_Troy directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!
SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
XDA:DevDB Information
[RECOVERY][discovery] TWRP Touch Recovery [OFFICIAL], ROM for the Sony XA2 Ultra
Contributors
LuK1337
Source Code: https://github.com/TeamWin
ROM OS Version: Windows 8 Mobile
Version Information
Status: Testing
Created 2018-10-30
Last Updated 2020-06-25

Thank you for this. I was able to boot the recovery and install magisk on my device. Is there any way to make the recovery permanent or do we have to fastboot the recovery every time?

Aklenz07 said:
Thank you for this. I was able to boot the recovery and install magisk on my device. Is there any way to make the recovery permanent or do we have to fastboot the recovery every time?
Click to expand...
Click to collapse
Not yet. Thought I don't think it's worth to /install/ it anyway.

Error flash
Hi,
I installed LineageOS but when I want to flash the "recovery", I am in error...
"target reported max download size of 536870912 bytes
sending 'recovery' (57720 KB)...
OKAY [ 1.281s]
writing 'recovery'...
FAILED (remote: No such partition.)
finished. total time: 1.284s"
Why ?

GunnarZX said:
Hi,
I installed LineageOS but when I want to flash the "recovery", I am in error...
"target reported max download size of 536870912 bytes
sending 'recovery' (57720 KB)...
OKAY [ 1.281s]
writing 'recovery'...
FAILED (remote: No such partition.)
finished. total time: 1.284s"
Why ?
Click to expand...
Click to collapse
You don't flash it.

LuK1337 said:
You don't flash it.
Click to expand...
Click to collapse
Just boot only ?

GunnarZX said:
Just boot only ?
Click to expand...
Click to collapse
That's all you need.

Done
It messed up (bootloop) at first, but second time worked fine.

Messed up my Xperia XA2 ultra
Hi i tried to use twrp 3 to install lineage OS.
Unlocked bootloader.
Fastboot boot the twrp.img
Backed up the device
Installed lineage os 15.1 and got an error
So decided to roll back to stock os
Restored the backup files.
It failed to restore it: device in bootloop.
I tried to use sony flashtool got an error; usb debug off
Can anybody help me?

bsbrfb said:
Hi i tried to use twrp 3 to install lineage OS.
Unlocked bootloader.
Fastboot boot the twrp.img
Backed up the device
Installed lineage os 15.1 and got an error
So decided to roll back to stock os
Restored the backup files.
It failed to restore it: device in bootloop.
I tried to use sony flashtool got an error; usb debug off
Can anybody help me?
Click to expand...
Click to collapse
Restore phone with Sony flash tool
https://developer.sony.com/develop/open-devices/get-started/flash-tool/
Install Lineage properly
https://wiki.lineageos.org/devices/discovery/install

Hi
Will this work on H3223 ?
Can this h3223 be rooted

mchlbenner said:
Hi
Will this work on H3223 ?
Can this h3223 be rooted
Click to expand...
Click to collapse
Unsure about root... Yet... But if you are bootloader unlocked you should at least be able to boot to twrp...

mchlbenner said:
Hi
Will this work on H3223 ?
Can this h3223 be rooted
Click to expand...
Click to collapse
Yes it roots

appleknight said:
Yes it roots
Click to expand...
Click to collapse
Magisk, and patch n flash boot.img?
Sorry mate, i'm coming from a device where kernel and ramdisk were separate partitions...
EDIT: Yes. Exactly

Aklenz07 said:
Restore phone with Sony flash tool
How Do I unlock the device?
I get an error saying my device is locked
Click to expand...
Click to collapse

tournelhenry said:
Aklenz07 said:
Restore phone with Sony flash tool
How Do I unlock the device?
I get an error saying my device is locked
Click to expand...
Click to collapse
https://wiki.lineageos.org/devices/discovery/install it tells you how to unlock
Click to expand...
Click to collapse

bootloader enter your imei it will give a key following all instructions precisely. it tells you the rxact command to use for unlocking the bootloader. after its unlocked, open your command prompt in your adb /fastboot folder. then adb reboot bootloader. after reboot phone will be blank screen. you have to download twrp 3.3.0.0 .img its the most updated. do that before the adb thing. then after adb thing, when you are booted into bootloader.....fastboot boot twrpxxxxx.img
this will boot into recovery. make sure you have magisk 19.zip doenloaded to your phone. then just flash magisk from the recovery, after reboot install magisk apk. there you go. sorry all of this is not in order. ive done it so many times im skipping ahead. i can give a better detailed and precise instructions if needed, litterally walk you thru it, if you need it. but the instructions provided by all the download sites are great. its easy peasy. if you need bettrr instructions youre more than welcome to get in contact with me. [email protected]
---------- Post added at 09:37 PM ---------- Previous post was at 09:31 PM ----------
sorry about that ****ty message, this goddamn site is retarded on mobile. im not going thru all that **** again but yes it can be rooted and its easy, if you need some clear instructions you can hit me up at the email i provided in that ****ty short bus post i left.
---------- Post added at 09:49 PM ---------- Previous post was at 09:37 PM ----------
you can keep the stock rom fyi. and theres an updated android 9.0 pie stock rom floating around too. im using it, no problems. you have to use xperifirm and flashtool to flash it tho. its simple unless its your first time doing, after you do it once youll ask yourself why it seemed so hard to get to that point. also, fyi, this particular is almost brick proof not saying it cant be bricked because, i did, several times boot looped it, everything, **** right now i dont even have a stock recovery because of some errors i made learning how to do all of this, but its up and running, its not buggy, magisk works great, stock android 9.0 firmware, just no recovery, but good ole twrp works just fine when you boot it for recovery. great phone to learn how to do all of this on. like i said its almost brick proof.

Sony Xperia XA2 Ultra - ROOT and Stock Rom 9.0
enter 192_161_227_73 in ip address format with the ftp header ftp://
should make rooting a little easier, need unlocked bootloader
simple interactive root process
also contains android 9.0 stock for Sony Xperia XA2 Ultra H3223

thanks Luk1337 for your work.
A) I get a stuck boot on SONY white screen when trying to reboot after a boot to twrp using fastboot (swipe to allow modifications and nothing else). Fastboot boot to TWRP was after a clean installation of Android Pie.
B) I even made a TWRP backup of the Android Pie rom but restoring backup runs into same issue of stuck on SONY logo). (well if just a twrp boot to resulted in a stuck boot (as in A) rebooting after a twrp backup restore would not have a chance either but just mentioning)
I am guessing we need a disable verity to avoid this?
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
https://forum.xda-developers.com/showpost.php?p=77177197&postcount=3
Do we have a vbmeta.img for the XA2 Ultra? (from stock kernel) sorry if a noob question. Thanks.

mac231us said:
thanks Luk1337 for your work.
A) I get a stuck boot on SONY white screen when trying to reboot after a boot to twrp using fastboot (swipe to allow modifications and nothing else). Fastboot boot to TWRP was after a clean installation of Android Pie.
B) I even made a TWRP backup of the Android Pie rom but restoring backup runs into same issue of stuck on SONY logo). (well if just a twrp boot to resulted in a stuck boot (as in A) rebooting after a twrp backup restore would not have a chance either but just mentioning)
I am guessing we need a disable verity to avoid this?
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
https://forum.xda-developers.com/showpost.php?p=77177197&postcount=3
Do we have a vbmeta.img for the XA2 Ultra? (from stock kernel) sorry if a noob question. Thanks.
Click to expand...
Click to collapse
Flash magisk or something, it'll disable verity.
Also we don't have vbmeta partition.

[Solved][PX5 GS] Can not use custom recovery

I would like to flash custom recovery -> in order to use custom ROM -> in order to gain split screen in my 7" device (ehhh)
I have root, adb, access to bootloader (everything what I need..) but it does not work in default way.. - I mean flashing just by fastboot flash recovery TWRP.img
I have checked those TWRP builds
https://twrpbuilder.github.io/downloads/twrp/ (type px5)
Flashing worked fine (no error, success message)
But after rebooting to recovery I still have original recovery. Note: I have to reboot to system, and then to recovery by adb command. There is no reset button on my device, I can only enter bootloader by long pressing volume button while booting.
I saw `backup` partition in my device. Is it possible that system is reverting recovery partition? How to fix that so I can use TWRP

SZAMAN92 said:
I would like to flash custom recovery -> in order to use custom ROM -> in order to gain split screen in my 7" device (ehhh)
I have root, adb, access to bootloader (everything what I need..) but it does not work in default way.. - I mean flashing just by fastboot flash recovery TWRP.img
I have checked those TWRP builds
https://twrpbuilder.github.io/downloads/twrp/ (type px5)
Flashing worked fine (no error, success message)
But after rebooting to recovery I still have original recovery. Note: I have to reboot to system, and then to recovery by adb command. There is no reset button on my device, I can only enter bootloader by long pressing volume button while booting.
I saw `backup` partition in my device. Is it possible that system is reverting recovery partition? How to fix that so I can use TWRP
Click to expand...
Click to collapse
That TWRP don't work in PX5. I'm trying to get it work

Good luck!
Please inform me if you will succeed.

Have you first tried to boot TWRP without flashing? I'd most certianly want to try that before flashing something.
Did that work?
This might sound super silly, but did you also unlock the bootloader first? (Sorry, I'm not familiar with your specific device so this may or may not apply in your situation)

stokedcrf said:
Have you first tried to boot TWRP without flashing? I'd most certianly want to try that before flashing something.
Did that work?
This might sound super silly, but did you also unlock the bootloader first? (Sorry, I'm not familiar with your specific device so this may or may not apply in your situation)
Click to expand...
Click to collapse
Any advice is welcome thanks
But without unlocking bootloader I would not be able to go to bootloader and use fastboot tool right? So I concluded it is already unlocked.
I tried
fastboot boot TWRP.img
Image was downloaded and booted (success message was printed in console), I lost connection with device so it went in some other mode then bootloader, but after 30 seconds of black screen I have switch power off and back on to restart.

SZAMAN92 said:
Any advice is welcome thanks
But without unlocking bootloader I would not be able to go to bootloader and use fastboot tool right? So I concluded it is already unlocked.
I tried
fastboot boot TWRP.img
Image was downloaded and booted (success message was printed in console), I lost connection with device so it went in some other mode then bootloader, but after 30 seconds of black screen I have switch power off and back on to restart.
Click to expand...
Click to collapse
What android version you have ? 8 ?

tuga_z said:
What android version you have ? 8 ?
Click to expand...
Click to collapse
9
Build nr: rk3368-userdebug 9 PQ2A 190305
Kernel v: 4.4.167
MCU: MTCE_GS_V3.07_3
It is that build:
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX5 Android 9/HA/HA_px5_9.0_ota(20190528)升级包.7z
I tried using A8 roms but I can not flash it with original recovery.. It requires device name be PX5 (I have rk3368). If I remove checking from rom updater script, signature verification fails.

I have tried recovery from Malaysk pack (extracted from update.zip), tried RecoveryInstaller from malaysk, lot of TWRP which I have found in web.
Nothing worked.
However as a last chance I used bootable SD from Malaysk - recovery (for android 8) successfully installed, Malyask rom installed. Im happy now
BTW. If you want you system to not revert recovery - you need to remove "/system/recovery-from-boot.p"

SZAMAN92 said:
I have tried recovery from Malaysk pack (extracted from update.zip), tried RecoveryInstaller from malaysk, lot of TWRP which I have found in web.
Nothing worked.
However as a last chance I used bootable SD from Malaysk - recovery (for android 8) successfully installed, Malyask rom installed. Im happy now
BTW. If you want you system to not revert recovery - you need to remove "/system/recovery-from-boot.p"
Click to expand...
Click to collapse
By this you mean that you no longer need TWRP for android 8 ?

tuga_z said:
By this you mean that you no longer need TWRP for android 8 ?
Click to expand...
Click to collapse
I mean I already have Recovery v8. So I was been able to flash custom A8 ROM.
However if you would implement TWRP please message me It is always better.

SZAMAN92 said:
I mean I already have
However if you would implement TWRP please message me It is always better.
Click to expand...
Click to collapse
Except if you ever want to update your unit or MCU, then it's pretty much useless.

marchnz said:
Except if you ever want to update your unit or MCU, then it's pretty much useless.
Click to expand...
Click to collapse
Maybe you are right. But at least it is easier to backup / restore whole device with TWRP.

Help With Lineage OS 18.1 Install -- stuck at first step(!)

Greetings,
Recently picked up this Pixel 3 and I like it hardware-wise but want to degoogle as much as I can (only want the bare minimum Play store to ensure I can use all my usual apps [nothing from Google - let me know if you need a list]).
Think that means I'll want to end up with Lineage OS 18.1 (Android 11?) + OpenGApps (Pico) + Magisk (for root?) does this seem correct?
Been reading a mishmash of this: https://forum.xda-developers.com/t/the-complete-pixel-3-how-to-guide-newbie-friendly.3922269/page-2 and other guides and I'm a bit confused.
I've rooted and imaged my previous Moto phone but it's been a while. From what I gather so far, the general plan for this Pixel is: oem unlock, usb debugging, unlock bootloader, boot recovery, install recovery, install lineage, install opengapps, install magisk, ????, profit.
However in the guide I linked, I see that the TWRP section is all red and strikethrough. And have read (perhaps old info?) that Android 10 and up TWRP doesn't work/support?
Yet every guide I've seen says to install TWRP and also the date on this OP is updated November 2020...? Plus, there are notes on the twrp page that just say mtp isn't working but otherwise that means it should work, right?: (https://twrp.me/google/googlepixel3.html)
I've unlocked the bootloader oem unlock, got the USB drivers and platform-tools installed (via most up-to-date Android Studio), see my device (Google Pixel 3) with adb devices, and can issue commands like adb reboot fastboot... I have everything this guide mentions ready to go, but I am stuck at temporarily booting recovery image:
Error output:
C:\Users\Nate\AppData\Local\Android\Sdk\platform-tools>fastboot boot twrp-3.3.0-0-blueline.img
Sending 'boot.img' (65536 KB) OKAY [ 0.232s]
Booting FAILED (remote: 'Unrecognized command boot')
fastboot: error: Command failed
C:\Users\Nate\AppData\Local\Android\Sdk\platform-tools>fastboot boot twrp-3.3.0-0-blueline.img
Sending 'boot.img' (65536 KB) OKAY [ 0.263s]
Booting FAILED (remote: 'Error verifying the received boot.img: Invalid Parameter')
fastboot: error: Command failed
The first command I realized failed because it was in 'fastbootd'... so I made sure to have it on the 'regular' fastboot, and get the second error. Invalid parameter... what's invalid?
This is what my screen looks like which makes me believe I've done right so far (attachments).
Feel incredibly humbled to be stuck at the first stage
Can anyone please tell me what I'm doing wrong or what I missed? Your assistance is much appreciated.
Thank you in advance.

TWRP has not worked on the Pixel 3 for a couple of years. I have not tried installing Lineage on my Pixel 3, but the process described at https://wiki.lineageos.org/devices/blueline/install should work. Basically use Lineage Recovery instead of TWRP.

dcarvil said:
TWRP has not worked on the Pixel 3 for a couple of years. I have not tried installing Lineage on my Pixel 3, but the process described at https://wiki.lineageos.org/devices/blueline/install should work. Basically use Lineage Recovery instead of TWRP.
Click to expand...
Click to collapse
Ok, thank you for the reply. I will go ahead and use the Lineage Built in recovery.
I wanted to use TWRP since before I actually start changing things, wanted to do a full and complete backup, basically a complete image of all files and partitions as is before I start changing things. I'll check the lineage wiki, but to your knowledge can you do a complete backup from lineage recovery?

nasch007 said:
Ok, thank you for the reply. I will go ahead and use the Lineage Built in recovery.
I wanted to use TWRP since before I actually start changing things, wanted to do a full and complete backup, basically a complete image of all files and partitions as is before I start changing things. I'll check the lineage wiki, but to your knowledge can you do a complete backup from lineage recovery?
Click to expand...
Click to collapse
Sorry, I have not used Lineage Recovery, so I don't know what backup capability it has.

Lineage recovery is just a modified stock recovery, it has no backup ability, only what is in stock.

wangdaning said:
Lineage recovery is just a modified stock recovery, it has no backup ability, only what is in stock.
Click to expand...
Click to collapse
Roger that. Thanks to dcarvil's guidance (pointing me to the correct instructions) I was able to successfully install and root.
I have some follow up questions, probably best suited for another thread. But while I have your attention, could you tell me where to report bugs or get general usage support? There's a few things that I don't think are working the way they're supposed to or features that seem missing. If you don't know, I respect that and a mod can close this thread.
Thanks again!