Hi !
I had follow this thread https://forum.xda-developers.com/nokia-3/how-to/guide-how-to-flash-twrp-magisk-t3785768
and I had install TWRP but now when i try to start my phone,I can access to TWRP and fastboot but I can't access to the system.
My Nokia 3 freeze on "Powered by Android - Orange state -Your device has been unlocked and can't be trusted - Your device will boot in 5 seconds"
------
Nokia 3 - 1032 / Dowgraded to 7.0
Somebody help me plz ! :fingers-crossed:
>Taps< said:
Hi !
I had follow this thread https://forum.xda-developers.com/nokia-3/how-to/guide-how-to-flash-twrp-magisk-t3785768
and I had install TWRP but now when i try to start my phone,I can access to TWRP and fastboot but I can't access to the system.
My Nokia 3 freeze on "Powered by Android - Orange state -Your device has been unlocked and can't be trusted - Your device will boot in 5 seconds"
------
Nokia 3 - 1032 / Dowgraded to 7.0
Somebody help me plz ! :fingers-crossed:
Click to expand...
Click to collapse
Did you unlocked your bootloader and after that did you flash TWRP without reboot?
Maybe I'm wrong but when you unlock your bootloader, the phone automatically reboots into stock recovery and and immediately wipe everything (included your internal storage) and then reboots normally. If you flashed TWRP after unlocking your bootloader, your phone will boot into TWRP but it won't wipe anything.
I think that happened.
Isrks said:
Did you unlocked your bootloader and after that did you flash TWRP without reboot?
Maybe I'm wrong but when you unlock your bootloader, the phone automatically reboots into stock recovery and and immediately wipe everything (included your internal storage) and then reboots normally. If you flashed TWRP after unlocking your bootloader, your phone will boot into TWRP but it won't wipe anything.
I think that happened.
Click to expand...
Click to collapse
Mmh after I unlocked the bootloader, my phone was freeze on this
Select Boot Mode :
[VOLUME_UP to select. VOLUME DOWN is OK]
[Recovery Mode]
[Fastboot Mode] <<==
[Normal Mode]
=> FASTBOOT mode.....
So, I forced it to reboot, after everything seems ok.
What part must I reflash ?
>Taps< said:
Mmh after I unlocked the bootloader, my phone was freeze on this
Select Boot Mode :
[VOLUME_UP to select. VOLUME DOWN is OK]
[Recovery Mode]
[Fastboot Mode] <<==
[Normal Mode]
=> FASTBOOT mode.....
So, I forced it to reboot, after everything seems ok.
What part must I reflash ?
Click to expand...
Click to collapse
When I unlocked the bootloader my phone freezed too, so I typed in Windows cmd "fastboot reboot". After that, my phone was formatted by stock recovery.
You should reflash stock recovery if you have TWRP, so the stock recovery can format your internal storage, if not, your phone won't boot.
:fingers-crossed:
Isrks said:
When I unlocked the bootloader my phone freezed too, so I typed in Windows cmd "fastboot reboot". After that, my phone was formatted by stock recovery.
You should reflash stock recovery if you have TWRP, so the stock recovery can format your internal storage, if not, your phone won't boot.
:fingers-crossed:
Click to expand...
Click to collapse
Ok, so fastboot didn't work at all (just waiting devices)
I tried to reflash TWRP nothing happens, I tried to do a factory wipe with twrp but nothing happens too.
I searched a stock recovery for nokia 3 1032- Android 7.0 but found nothing - must i use stock recovery for Android 7.1.1 or do you have a link to a stock recovery for 7.0 ?
------------
I found this on XDA : Is it a good way if nothing work ?
Hi, I was able to unbricked my phone using this:
"https://mega.nz/#F!0lMBiIIYgB!c9TeOWFrKpf0XfOwXzunrg"
Here is the SP Flash tool, the download agent for Nokia's phones and the ROM unpacked
As SkaboXD said (i don't know if it were in this post or in other one) you must:
1- Download the files I provided you
2- Install SP Flash Tool
3- Choose the download agent
4- Choose the scatter
5- Press download and plug your phone (it must be OFF)
6- Wait and enjoy.
I must thank to everyone who give us this files. I couldn't unbricked my phone without your help
Click to expand...
Click to collapse
>Taps< said:
Ok, so fastboot didn't work at all (just waiting devices)
I tried to reflash TWRP nothing happens, I tried to do a factory wipe with twrp but nothing happens too.
I searched a stock recovery for nokia 3 1032- Android 7.0 but found nothing - must i use stock recovery for Android 7.1.1 or do you have a link to a stock recovery for 7.0 ?
------------
I found this on XDA : Is it a good way if nothing work ?
Click to expand...
Click to collapse
I think that this is the link:
https://forum.xda-developers.com/nokia-3/help/nokia-3-preloader-bricked-t3719357/post76069467#post76069467
I used SP flash tools to downgrade and install TWRP in my phone.
Which tool did you use to downgrade your phone?
Isrks said:
I think that this is the link:
https://forum.xda-developers.com/nokia-3/help/nokia-3-preloader-bricked-t3719357/post76069467#post76069467
I used SP flash tools to downgrade and install TWRP in my phone.
Which tool did you use to downgrade your phone?
Click to expand...
Click to collapse
Ok thanks :fingers-crossed:, I will try it
To downgrade I used OST LA and to flash TWRP I used SP flash tools
>Taps< said:
Ok thanks :fingers-crossed:, I will try it
To downgrade I used OST LA and to flash TWRP I used SP flash tools
Click to expand...
Click to collapse
Good luck. :fingers-crossed:
You can flash again with OST LA. Or try to flash with SP flash tool the whole rom or just the recovery. To flash with SP flash tools you need a nb0 unpacker tool (my previous post have a link to another post with the tool link).
BTW feel free to ask something that you don't understand. :highfive:
Isrks said:
Good luck. :fingers-crossed:
You can flash again with OST LA. Or try to flash with SP flash tool the whole rom or just the recovery. To flash with SP flash tools you need a nb0 unpacker tool (my previous post have a link to another post with the tool link).
BTW feel free to ask something that you don't understand. :highfive:
Click to expand...
Click to collapse
Heyyyyy !!! Thank you !!!
It works again :victory: !!!
I used OST LA to reflash it !!! Thanks again <3
I think I will use the second alternative step to not get a brick bootloader ^^' https://forum.xda-developers.com/nokia-3/how-to/guide-how-to-flash-twrp-magisk-t3785768
----------
Do you know the safest way to relock the bootloader ?
>Taps< said:
I think I will use the second alternative step to not get a brick bootloader ^^' https://forum.xda-developers.com/nokia-3/how-to/guide-how-to-flash-twrp-magisk-t3785768
----------
Do you know the safest way to relock the bootloader ?
Click to expand...
Click to collapse
Is like unlock bootloader, just change "fastboot oem unlock" to "fastboot oem lock".
But your internal storage will be formatted again by stock recovery, so you must have stock recovery installed.
After relock, your device will get ota updates, so you need stock recovery to install them.
I recommend root your device after all the updates, even you can install TWRP without problems.
I installed TWRP, root and installed stock recovery to get updates. Choose the method that you like.
Good luck. :highfive:
Related
Hello,
Sorry for this post but i have a real problem !
I have install a twrp and root my phone for flash rom but now i have factory rest and haven't any OS...
I cant' launch twrp and even i install with fastboot. I have just "your device is booting now".
I don't know how to "backup" and repair my honor.
If anyone undernstand my problem...
ps : I'm really sorry for my english
If you need picture or more information please tell me ...
Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP
djx24 said:
Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP
Click to expand...
Click to collapse
Thanks for your answer
I try to install a recovery on fastboot but when i reboot my phone stay on "your device is booting now..." that's the problem ...
I have try to use "fastboot boot twrp.img" but failed because command not allowed.
Try to erase but not allowed too. I can flash recovery, or flash boot but change nothing...
Rommco05 said:
Try instal full fw (M B120 or B131) via dload method
Click to expand...
Click to collapse
dload method ? But i need my phone turned ON for that no ? or i need twrp ? But i can't use recovery mode. I can use only erecovery and fastboot.
Thanks for your message
Rommco05 said:
...??? no. Turn off phone and turn on with buttons vol+/vol-/on,off press together. Make folder on SDcard dload/ put inside unzip full fw.
Click to expand...
Click to collapse
Thanks you ! Installing update...
I think it work
(Sorry for all i'm a noob ...)
apparently my stock recovery is corrupted. I am unable to flash back to stock or apply any updates. the phone hangs at the bootloader unlocked warning screen every time. I have tried everything to try to fix it but nothing works. I extracted the stock recovery and even tried to fastboot flash it but it didn't work either. does anyone have any suggestions? the phone is not rooted, but the bootloader is unlocked. thanks so much is advance.
**also mean to mention that erecovery will not work either. it always says download failed
Mass1veDynam1c said:
apparently my stock recovery is corrupted. I am unable to flash back to stock or apply any updates. the phone hangs at the bootloader unlocked warning screen every time. I have tried everything to try to fix it but nothing works. I extracted the stock recovery and even tried to fastboot flash it but it didn't work either. does anyone have any suggestions? the phone is not rooted, but the bootloader is unlocked. thanks so much is advance.
**also mean to mention that erecovery will not work either. it always says download failed
Click to expand...
Click to collapse
same here. did you managed to work it out?
Solved
eelc said:
same here. did you managed to work it out?
Click to expand...
Click to collapse
Yes finally. You have to download the update file for whatever version of the rom you currently have installed. Then extract userdata, boot, system, and erecovery1 and erecovery2 images. Fastboot flash them in bootloader mode. Reboot device. Shutdown device. Boot to system recovery and do a full system restore. All set.
Mass1veDynam1c said:
Yes finally. You have to download the update file for whatever version of the rom you currently have installed. Then extract userdata, boot, system, and erecovery1 and erecovery2 images. Fastboot flash them in bootloader mode. Reboot device. Shutdown device. Boot to system recovery and do a full system restore. All set.
Click to expand...
Click to collapse
can u make the total tutorial video of this whole process ???
I would ask if you could post a link to the update you used and a list of the commands you used..im in the US ..so it is honor 6x for the US
bricked honor 6x
You need three softwares
1. huawei multi tool by mt,,,,, in english version bro
2. Huawei update extractor
3. Firmware file update .zip
First extract the zip file , there you will get update.app file . Extract BOOT.IMG RECOVERY.IMG SYSTEM.IMG USER DATA.IMG using Huawei extractor software .
NOW open huawei multitool app (internet connection required)
Put all these files you extracted in unbrick folder of huawei multi tool
Follow steps to unbrick your device
Thank you..
can you send the links please....thank you!
Mass1veDynam1c said:
apparently my stock recovery is corrupted. I am unable to flash back to stock or apply any updates. the phone hangs at the bootloader unlocked warning screen every time. I have tried everything to try to fix it but nothing works. I extracted the stock recovery and even tried to fastboot flash it but it didn't work either. does anyone have any suggestions? the phone is not rooted, but the bootloader is unlocked. thanks so much is advance.
**also mean to mention that erecovery will not work either. it always says download failed
Click to expand...
Click to collapse
Try to flash twrp first , later flash stock recovery from twrp by clicking on flash image . Be sure u are installing a working recovery but not a corrupted one
Code:
Warning! any damage done to your device is not my fault, use at your own risk!
This zip should be used mainly if you wiped system for some reason and didn't back up, its TA-1060 May patch system image + kernel + vendor files
Unlocked bootloader required!
TWRP
1. Boot into TWRP
2. Format /data partition in TWRP
3. Use 'adb push ta_1060_oreo_may_18.zip /sdcard/' in windows/linux/mac
4. Go to sdcard in TWRP and flash ta_1060_oreo_may_18.zip
5. Reboot to bootloader
6. use 'fastboot flash recovery recovery.bin' (Link bellow)
7. Optional: fastboot oem lock
8. reboot
9. on boot you will get encryption, click on the reset button when android loads
10. You will reboot into recovery then back into system, done
Fastboot
1. Extract zip file
2. flash system.img, boot.img, vendor.img in fastboot
3. fastboot reboot
Links:
Stock ROM zip May
Recovery image
Good luck
XDA:DevDB Information
[ROM][STOCK][TWRP][27/06/18]TA-1060 Stock Oreo 8.1, ROM for the Nokia 1
Contributors
sooti
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Created 2018-06-27
Last Updated 2018-06-27
So we can flash either through TWRP or Fastboot right?
Zeenat11 said:
So we can flash either through TWRP or Fastboot right?
Click to expand...
Click to collapse
I haven't tested fastboot but it should work. TWRP works 100%
Thank you very much, you are a life saver!!
I was stuck in a TWRP loop.
I tried flashing through TWRP but it didn't work but the fastboot method worked like a charm!
My phone is running again.
Thank you very much.
Is there any userdata.img available?
alexstarc said:
Thank you very much.
Is there any userdata.img available?
Click to expand...
Click to collapse
Nope but do you really need it? just format in fastboot or TWRP.
sooti said:
Nope but do you really need it? just format in fastboot or TWRP.
Click to expand...
Click to collapse
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
I wrote in the instructions...
If you get a password just enter a random one, then it will ask you to wipe the device, click ok and it will reboot to recovery and then wipe userdata and boot fine.
just make sure you flash the recovery.bin and not twrp before you wipe
alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
Same happened to me. I solved it by a hard reset via the stock recovery.
Make sure you flash the recovery.bin like Sooti said.
Wiping through twrp doesn't work.
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
A little warning.
It looks like the recovery.bin I took from another nokia 1 device doesn't match the checksum check which causes a failed during ota updates, please only flash this rom if you soft bricked your device.
If anyone can get me TA-1060 stock recovery image that should solve it. for now you can't update the phone until a fix is found
I have Nokia Ta 1066. Will this rom work on mine? Also I read somewhere Ta 1060 is single sim variant. What about the second sim?
Has anyone with TA 1066 tried it?
Thanks. Both methods work fine. Don't ask how I found out.....
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
coolboyforeva said:
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
Click to expand...
Click to collapse
I don't have stock recovery from our device i have from another variant of Nokia 1
Hey guys i have a TA-1056 and after unlocking bootloader and flashing TWRP it booted to recovery and came up encrypted, after looking around the only solution was to format data, afterwards when rebooting it always boots to recovery, i tried flashing this zip and i get the same issue and i can't find the stock ROM for the 1056 anywhere online, can anyone help me out? i really appreciate it
Kurajmo said:
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
Click to expand...
Click to collapse
got any custom roms?
Does Nokia 1 support DT2W?
Sir, is that possible to get a stock rom of TA 1056 ?
I have searched everywhere but whole thing available over net just left my phone bricked. All i need is a working rom source. Even if that’s a custom rom too to flash via sp flash tool. Thanks in advance
Can any please repost the firmware , the link isn't working
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Files You Need To Download:
1:Miracle Box Tool-https://mega.nz/#!lVsQGSaC!6TTJopMyntMQA0IKYdC_5BlsxIjV_Ibhx2qWL_ZqDyI
2:Stock Rom- https://mega.nz/#F!ncMFUaaa!0fVNwJ_Io0EMFv8YLjBZlQ [Select Download As Zip]
3:https://androidmtk.com/install-android-cdc-driver-manually [Install Drivers Using This Guide]
Click to expand...
Click to collapse
Steps To Flash Stock Rom:
1:Install Miracle Box And Drivers
2:Launch Miracle Box
3: Open Mtk Tab
4:Click on Services
5:Select Write From The Available Options
6:Select 8th Boot From Boot Options
7:In Second Options,Select Oppo Realme 1
8:Check Skip Preloader File
9:Hit Start
10:Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
11:Remove Cable And Press Power+VOLUME Up For 15 Seconds
You Have Unbricked Your Device
Click to expand...
Click to collapse
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
1st link miracle box is not working plz correct it bro
can you share download links from other providers? mega asks for premium account.
thank you.
Didn't work for me
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
After flashing twrp recovery when I booted my device, a software update popped up and it automatically updated over night and my device hard bricked. I tried everything but couldn't fix it. My pc is not even recognising my phone so can't follow your steps. Any suggestion or help to fix my device will be appreciated.
same mine bro,
rom version was a31 and after installed twrp, my device hard bricked. i couldnt solve yet, waiting a newer version of miracle box or etc.
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
i dumped the stock rom bro @besttipsYT Not Shobith
this method is not working at this time...when i trying to flash by this method only show.......phone connected......downloding boot8....then disconnect my phone ..&reboot
Please don't flash custom recovery (here twrp) without proper knowledge or just sake of modding device. The builds and methods are not always working and may end up bricking your device.
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Alen012 said:
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Click to expand...
Click to collapse
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
StripsOfTatti said:
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Click to expand...
Click to collapse
Which recovery are you in? Is it Stock or Custom?
If u have stock first wipe data and then flash boot.img or ozip file (stock ROM).
If u have custom recovery then you need to flash stock recovery + stock ROM.
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Simba Gaara said:
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Click to expand...
Click to collapse
If recovery and fastboot are inaccessible means you need to visit service center.
When trying to connect realme 1 to miracle it showing usb device not connected, how to solve this? Drivers are installed
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
AwesomeVk47 said:
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
Click to expand...
Click to collapse
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Naveen56 said:
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Click to expand...
Click to collapse
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
AwesomeVk47 said:
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
Click to expand...
Click to collapse
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Code:
fastboot oem reboot-recovery
Install ozip.
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Is that link for realme 1 stock recovery?.......it would be great help if you could tell me how to obtain it....just for future use
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Will this link work for stock rom file?
Link1
https://www.realme.com/in/support/software-update
Link2
https://www.getdroidtips.com/oppo-realme-1-stock-firmware-collections/
Which one of these should I use?
What is a brick?If there is no usual way to recover your mobile, then it is called brick in my opinion. That means if you can't able to go to recovery and fastboot mode or the device is just blank with no sign of life.
When brick happens?It will happen because of locking bootloader with custom images or just because of Mediatek/Realme strange behaviour.
What we have to do if brick happens?Simply we have to flash stock firmware with Smart Phone Flash Tool(aka SPFlash Tool). With only SPFlash Tool we can't do anything, since we don't have permission for it. But with the advent of MTK-bypass, we can have full control over our device. If we don't have this MTK-bypass, then we have search for costly alternative's.
You can't flash only if your eMMC is damaged, which is the worst case because oppo phones are prone to eMMC failure.
Click to expand...
Click to collapse
Where to get firmware to flash?Download decrypted .ofp firmware from https://drive.google.com/file/d/1SOmRxix9_UtjOLLanXPYxf4YK1NrA_RW/view
Thanks to @bx2_nero for it.
What is the procedure for using MTK-bypass and SPFlashTool?MTK-bypass is a Python script and it needs different USB ways for working. So with these two in place, we can get our work done.
Linux UsersFor Linux we have to use FireISO or patched kernels for working of MTK-bypass.
Use the Linux guide by @bx2_nero at https://forum.xda-developers.com/t/...our-realme-6-6i-india-6s-linux-method.4251077
Windows UsersFor Windows we have to use libusb32 filter for MTK-bypass working.
Use the guide by @daeSundae at https://forum.xda-developers.com/t/...india-6s-using-spflash-tool-for-free.4222027/
MTK-bypass Official instructionsSee Github ReadMe at https://github.com/MTK-bypass/bypass_utility and XDA support thread at https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377/
Creditsxyzz / xyz`: GitHub | XDA
chaosmaster / k4y0z: GitHub | XDA
Dinolek: GitHub | XDA
References- https://forum.hovatek.com/thread-37957.html
- https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirement/
- https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
- https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
- https://forum.xda-developers.com/t/...ash-tool-authentication.4236881/post-84627359
MTKClient
After MTK-bypass got success, @viperbjk who is a reverse engineer came up with a FOSS replacement of SP Flash Tool.
MTKClient combines MTK-bypass and SP Flash Tool together and with many improvements and new features.
Ability to flash partitions without Scatter file
Ability to Readback partitions without specifying address and length
Ability to Format partitions without specifying address and length
Run multiple commands without reconnecting the device
Flash protected partitions(opporeserve2, special_preload, my_custom and cdt_engineering) with locked bootloader
Unlock bootloader without need of in-depth test/Deep testing app from Realme
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
www.github.com
Reserved
I need help, my C12 is stuck on fastboot mode. This happened after flashing a GSI using TWRP and flashing the image in the Super (System and Vendor) partition.
I tried rebooting to recovery mode by executing fastboot reboot recovery but it says that bootloader is not known.
I also tried to flash a GSI (taught it might fix the problem) using fastboot flash system system.img but it says that no partition named system exists.
Please suggest what I should do.
Bro, can you make a video about this? my realme c12 got hardbricked after I flashed ozip file from stock recovery while bootloader is unlocked. it got hardbricked when I reboot it after flashing ozip
DFM23 said:
Bro, can you make a video about this? my realme c12 got hardbricked after I flashed ozip file from stock recovery while bootloader is unlocked. it got hardbricked when I reboot it after flashing ozip
Click to expand...
Click to collapse
What is the present state of the device? Can you able to boot to fastboot mode?
HemanthJabalpuri said:
What is the present state of the device? Can you able to boot to fastboot mode?
Click to expand...
Click to collapse
it has no sign of life, cant go to recovery or fastboot. when I connect it to pc it goes connect and disconnected.
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
youcancallmekhen said:
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
Click to expand...
Click to collapse
Use latest platform tools
youcancallmekhen said:
How can I reboot to recovery mode when in fastboot mode? The command fastboot reboot recovery is not working for me.
Click to expand...
Click to collapse
HemanthJabalpuri said:
Use latest platform tools
Click to expand...
Click to collapse
Sir I've finally able to reboot to recovery. I've tried flashing the OZIP file for my model but after some time it says Installation failed. When I was still using custom recovery, I wasn't able to mount System and Vendor. My bootloader is also unlocked sir.
Should I lock my bootloader sir?
youcancallmekhen said:
Should I lock my bootloader sir?
Click to expand...
Click to collapse
Don't lock bootloader.
Download this https://drive.google.com/file/d/1jLdDz7M0G_KPDn4jXjTeuFnO1C-MFaBs/view (It is from A.87 UI 1.0 Stock ROM)
Extract above 7z file and flash ONLY super partition from it and TWRP from https://androidfilehost.com/?fid=7161016148664807816 with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery TWRP.img
fastboot reboot recovery
Now enable 'Skip Treble Compatibility error' in TWRP settings and flash stock ROM .ozip in TWRP.
Thanks
HemanthJabalpuri said:
Don't lock bootloader.
Download this https://sourceforge.net/projects/realmec11/files/Fastboot-ROM/[email protected]/download
Extract above 7z file and flash ONLY super partition from it with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery stock-recovery.img
fastboot reboot recovery
Now flash stock ROM .ozip in stock recovery.
Thanks
Click to expand...
Click to collapse
Oh my, thank you so much sir. You have no idea how much you are helping me sir! My parents will be so happy, and we won't waste money… Thank you so much sir…
I'll update you sir after doing these, thank you sir! ♥
HemanthJabalpuri said:
Don't lock bootloader.
Download this https://sourceforge.net/projects/realmec11/files/Fastboot-ROM/[email protected]/download
Extract above 7z file and flash ONLY super partition from it with below commands
Code:
fastboot -w
fastboot flash super super.img
fastboot flash recovery stock-recovery.img
fastboot reboot recovery
Now flash stock ROM .ozip in stock recovery.
Thanks
Click to expand...
Click to collapse
I don't have much data left today sir, so I will download this later. Thank you very much again sir, you're my hero!
DFM23 said:
it has no sign of life, cant go to recovery or fastboot. when I connect it to pc it goes connect and disconnected.
Click to expand...
Click to collapse
Follow the guide and you can get your mobile back to life.
Thanks
HemanthJabalpuri said:
Follow the guide and you can get your mobile back to life.
Thanks
Click to expand...
Click to collapse
thank you bro, Ill follow your guide then. btw does the RMX2185 firmware you provided works with realme c12? I look it up and saw that it was for realme c11
DFM23 said:
thank you bro, Ill follow your guide then. btw does the RMX2185 firmware you provided works with realme c12? I look it up and saw that it was for realme c11
Click to expand...
Click to collapse
Yes, both use same firmware.
I tried the guide but when I click download on sp flash tool it would stay in red bar for 1 min or more then message will appear saying STATUS_EXT_RAM_EXCEPTION. I have read a same comment here in xda about realme c12 I dont know if its only on realme c12.
Thanks for your works sir, you are super awesome!
I rooted My Device (Realme X2 Pro) by Magisk. And Since My Device Bootloader was unlocked I Unrooted/Uninstalled MAgisk.
While Locking Bootloader My Device is Stuck where It displays { The Current Image (boot/recovery) have been destroyed dand cannot boot. Please flash the correct Image or Contact Customer Service to fix it }
While Trying to ENter the Fast Boot Mode {By pressing Volume + - and Power Button} Its Unresponsive
It shows Realme Logo And chrging Display for a Instant
Do you Know any way around to fix my Problem?
Bhuprab said:
I rooted My Device (Realme X2 Pro) by Magisk. And Since My Device Bootloader was unlocked I Unrooted/Uninstalled MAgisk.
While Locking Bootloader My Device is Stuck where It displays { The Current Image (boot/recovery) have been destroyed dand cannot boot. Please flash the correct Image or Contact Customer Service to fix it }
While Trying to ENter the Fast Boot Mode {By pressing Volume + - and Power Button} Its Unresponsive
It shows Realme Logo And chrging Display for a Instant
Do you Know any way around to fix my Problem?
Click to expand...
Click to collapse
Since your device is Qualcomm, I don't know. In any device, we have to flash stock rom (or atleast the partitions that are modified) to get device in working state.
You may get better help at https://forum.xda-developers.com/f/realme-x2-pro-questions-answers.9439/
Thanks