My Gear Fit 2 pro stopped working recently. The core features such as steps, running, heart rate, cycling etc don't seem to recognise any movement. I can navigate around the menus without issue. Tried the reset and the factory reset but still refusing to work. Wondering whether the gyro is perhaps at fault. Anyone seen this before or any recommendations on how to fix? Thx
gordonm40 said:
My Gear Fit 2 pro stopped working recently. The core features such as steps, running, heart rate, cycling etc don't seem to recognise any movement. I can navigate around the menus without issue. Tried the reset and the factory reset but still refusing to work. Wondering whether the gyro is perhaps at fault. Anyone seen this before or any recommendations on how to fix? Thx
Click to expand...
Click to collapse
Hi,
Are you fixit? I have the same issue
..
Related
Since the update, my SW2 seems to be incapable of playing nicely with any other Bluetooth-enabled devices. If I am in an area where it is just my phone (LG G2 running KK) and the watch, everything works just fine. But if my phone connects to something else via BT, for example my car stereo or BT headphones), the watch will immediately disconnect and the only way to reestablish a connection is to power cycle the watch.
I'm trying to determine if this is a problem with the firmware update or simply a matter of a problem between phone's BT firmware and the watch. Anyone else have the same issue?
I don't face this problem. I've used 2 BT headphones models without any issue.
Sent from my SM-N9005 using Tapatalk
Before the update I had zero connection problems. After the update my SW2 constantly disconnects and sometimes reconnects, other times I have reconnect by going through smart connect and un-pairing/re-pairing to power cycle the watch. I have tried disabling apps and even removing all apps and resetting all to no avail. This is extremely frustrating because my fancy new expensive piece of tech is 99% useless . Also I have ZERO bluetooth devices on in the area besides the SW2.
Any help would be greatly appreciated. Is there a way to flash and/or format the SW2? I tried SUS(sony update service) which USED to have the SW2 in it with a repair option but they have since removed the SW2 in the latest version 2.14.6.2014170858.
help
Pirate_Freder said:
Before the update I had zero connection problems. After the update my SW2 constantly disconnects and sometimes reconnects, other times I have reconnect by going through smart connect and un-pairing/re-pairing to power cycle the watch. I have tried disabling apps and even removing all apps and resetting all to no avail. This is extremely frustrating because my fancy new expensive piece of tech is 99% useless . Also I have ZERO bluetooth devices on in the area besides the SW2.
Any help would be greatly appreciated. Is there a way to flash and/or format the SW2? I tried SUS(sony update service) which USED to have the SW2 in it with a repair option but they have since removed the SW2 in the latest version 2.14.6.2014170858.
Click to expand...
Click to collapse
helo
I have the same problem with my new sw2 firm: 1.0.B.4.154 and my sgs4 standard ROM .If You find some solutions for this problem please wright how make this.
Question: does any of you guys use the 'watchwidgets' app?
I had disconnection problems too only while using the clock widgets from this app.
As soon as I removed it all went back to normal.
I'd strongly suggest a connectivity test without the use of any 3rd party screen candy, at least for a day, maybe it'll help you find the culprit.
Sent from my Xperia V using Tapatalk
vrl13 said:
Question: does any of you guys use the 'watchwidgets' app?
I had disconnection problems too only while using the clock widgets from this app.
As soon as I removed it all went back to normal.
I'd strongly suggest a connectivity test without the use of any 3rd party screen candy, at least for a day, maybe it'll help you find the culprit.
Sent from my Xperia V using Tapatalk
Click to expand...
Click to collapse
I think the problem is on te watch because i try for four different phone with only 1 aplication for smw2 is smart watch connection
i think about loading Rom for watch but i don't now how.
It sounds like a watch problem indeed... can't you go to Sony with it? If you're still under warranty maybe they'll change it...
As for a watch ROM...there isn't any, as far as I am aware.
Sent from my Xperia V using Tapatalk
Same issues here. Mix of roms. With some roms all seams fine for a while. It always ends up with disconnects. I'm trying to find a reason. Mix of software and hardware. Coudl you post the HW version of your SW?
I have the same problem after update ... GT I8530
I have the same problem after update ... GT I8530
Hey guys,
yesterday I noticed that Bluetooth is switched off on my S7. I tried to switch it on again, but the slider/button in the bluetooth menu just stays gray, even though it moved to the right. It looks like the phone is not able to start blutooth for whatever reason. WiFi works without a flaw. My phone is completely stock, no root, no knox, no custom rom. I'm on stock rom G935FXXU1DQJ1
Any ideas how to fix this?
Try to perform a hard reset. Maybe there is a bug in your phone.
RossTeagan said:
Try to perform a hard reset. Maybe there is a bug in your phone.
Click to expand...
Click to collapse
Well I was hoping to find a solution without having to wipe everything. Without knowing if it will fix the issue, it would take me several hours of lifetime to setup the phone from scratch.
Ok - this is very strange. I'm still using the phone currently as it is and I'm wearing my Gear S2 smartwatch to at least know what time it is, but throughout the day bluetooth actually turned a few times on, synchronized with the watch and suddenly switch off again.
I was trying to stream music to a bluetooth speaker during one of the phases in which bluetooth was working, but the music stops after several seconds and bluetooth switches off again.
What the ....?
Ok I think I fixed it. Resetting all connectivity settings did the trick for me. Although I now need to reconnect to all the devices and WiFis. Still better then doing a factory reset
For my diabetes I use the Freestyle Libre system to measure my glucose levels. It works using NFC, it should work using NFC. Sadly it only works a few times out of every 10 times I try. Sometimes the Oppo reads my glucose levels with no problem but usually it is just a miss and miss scenario.
Sometimes turning NFC off and on resolves the issue, sometimes powering the Oppo off completely resolves the issue, but several times the seemingly only option was to do a factory reset , reinstalling everything again, whereafter it works a few days, when the same problem reappears again.
As you can imagine, not something that makes me happy. Anyone out here who recognizes these NFC problems, and has a solution, or a way to make it work more reliable. Every other NFC operations seem to work okay, but this one is really bugging me, especially as it is important with regards to my wellbeing. i am using a fully updated Oppo Find X2 Pro.
On my previous phone, a Samsung S9+, i had no issues at all.
I'm so glad someone else also has this issue!
I was about to start a similar thread.
I have a lot of issues scanning my libre and it hardly ever works!
Can anyone help locate the exact location of the NFC sensor. I have watched Jerry rigs everything teardown but he did not mention where exactly it is located.
If someone could give me the exact grid number from this grid I've created I'd be very grateful!
CheopsChefren said:
For my diabetes I use the Freestyle Libre system to measure my glucose levels. It works using NFC, it should work using NFC. Sadly it only works a few times out of every 10 times I try. Sometimes the Oppo reads my glucose levels with no problem but usually it is just a miss and miss scenario.
Sometimes turning NFC off and on resolves the issue, sometimes powering the Oppo off completely resolves the issue, but several times the seemingly only option was to do a factory reset , reinstalling everything again, whereafter it works a few days, when the same problem reappears again.
As you can imagine, not something that makes me happy. Anyone out here who recognizes these NFC problems, and has a solution, or a way to make it work more reliable. Every other NFC operations seem to work okay, but this one is really bugging me, especially as it is important with regards to my wellbeing. i am using a fully updated Oppo Find X2 Pro.
On my previous phone, a Samsung S9+, i had no issues at all.
Click to expand...
Click to collapse
Is this issue still present on Android 11 for you? My issue still persists even on a factory reset
Have you found solution. I have the Same problem with OPPO reno 4 z
I have bought an Oppo Find X3 Lite this weekend. Same issue. Anybody has a solution already for the above? I imagined only NFC would be enough but why is it that the Oppo phone does not connect with the scanner? Any idea anybody?
I got the Android 11 update for Oppo Reno 10x Zoom, and my Freestyle Libre 2 Sensors stopped working with the phone. When I try to scan, the NFC service hangs and NFC will not work anymore untill phone restart.
Oppo told me it is a known problem and they will try to fix it in a new firmware update. God knows when.
THANX A LOT, OPPO! Now I have to carry around the ****ty Freestyle reader all the time!
Hi Everyone. I had this issue and called ABBOT. Got a fix which now works. In your phone settings go to the libre link app and clear the cache data. Restart your phone and voila it works!
Did anyone experience such an issue? After disconnecting the phone from android auto the keyboard never shows up again for any input filed until the phone is rebooted.
I've tried changing the keyboard to another one, closing apps, cleaning memory... Nothing helps... Any ideas would be greatly appreciated!
Mine doesn't have that issue. Just wondering if you have any system apps disabled that might be causing your issue?
still haven't been able to use keyboard on your device??
If you can, reproduce the issue again... you can try to report the issue to Samsung Members app and see if Samsung is able to figure out what went wrong. If it's still not working, then I suppose you can chat with a tech on samsung website, see how you can get some technical help
Thanks guys! I suspect it's because of the Galaxy Max Hz and its Doze setting.
After I've disabled, it seems to be working fine.
Elastep said:
Thanks guys! I suspect it's because of the Galaxy Max Hz and its Doze setting.
After I've disabled, it seems to be working fine.
Click to expand...
Click to collapse
Hi - I have this exact same issue on my Note 10+. More often then not when I unplug my phone from Android Auto in the car, the normal keyboard stops working. It works fine when I restart the phone. I don't think I have "Galaxy Max Hz" on my phone, but were any other Doze setting you disabled to get this to work normally?
I've been having problems - the watch (Galaxy Watch 4) and phone (6 Pro) both pair initially just fine. But if I restart my phone, the phone won't reconnect to the watch, and the galaxy wearable app seems to have forgotten the watch. The only way to reconnect them is to reset the watch completely.
A further problem I seem to be having with the phone is that sometimes the "recents" button will just stop working. The only way to get it to work again so far has been to restart the phone. Which then brings me back to my pairing problem with the watch.
It's an annoying situation. Anyone else experience anything like this before?
No, can't say I have...My GW4 has been working fine on my P6P. Sorry I can't be of more help.
Same here. Try reinstalling the galaxy wear app and also the Google wear app from play store.
Has anyone been able to get the battery share function working between 6 pro and GW4?
aga13 said:
Same here. Try reinstalling the galaxy wear app and also the Google wear app from play store.
Has anyone been able to get the battery share function working between 6 pro and GW4?
Click to expand...
Click to collapse
I'm not sure if it ever will because Samsung decided to use a modified version of Qi wireless charging on the GW4... Seems to work on some from some searching but not all.