Just out of curiosity, has anyone tried to install xposed sdk 26 on their u12 yet or is it foolish without a recovery backup?
I flashed it using the Magisk App. Only thing I use it for is Greenify.
But with any Android around here. Make sure you have backups etc.
I personally have an RUU saved so if anything I'll just reflash my phone.
I use the Magisk Module "Xposed Framework (SDK 26)", systemless. It works without problems, but you neeed to use a special Xposed Installer app, linked in the module description.
The following Xposed Modules work for me: AFWall+, GravityBox [O], XPrivacyLua
Anyone have any more experience with Xposed on the U12+? There are just a few mods and tweaks I am missing and thinking about trying Xposed. I will report back my experience, thanks.
I was able to install Xposed with no issues but couldn't install gravitybox, plus it states that Xposed is for pure vanilla ROMs so I don't know
Xposed + GravityBox, XInsta and Greenify works without any problems. Disabled it because I want to use Google pay (doesn't work together)
Do not fool with Xposed. It is not worth the trouble I promise.
LibertyMonger said:
Do not fool with Xposed. It is not worth the trouble I promise.
Click to expand...
Click to collapse
Which features are you missing. Maybe there's a Magisk Module available for the one of the other.
Sent from my HTC U12+ using XDA Labs
5m4r7ph0n36uru said:
Which features are you missing. Maybe there's a Magisk Module available for the one of the other.
Sent from my HTC U12+ using XDA Labs
Click to expand...
Click to collapse
The only thing I really miss is back to kill. Really don't need much more. Probably don't even need that, it just became a habit lol. By the way, trying Xposed screwed my ability to use face unlock even after removing it. I had to run the RUU to get it back.
***EDIT I also miss the advanced power menu.
LibertyMonger said:
The only thing I really miss is back to kill. Really don't need much more. Probably don't even need that, it just became a habit lol. By the way, trying Xposed screwed my ability to use face unlock even after removing it. I had to run the RUU to get it back.
***EDIT I also miss the advanced power menu.
Click to expand...
Click to collapse
Well the APM is included in LeeDrOiD Shortcutter as far as I can tell. Will check for the back to kill thingy.
Sent from my HTC U12+ using XDA Labs
5m4r7ph0n36uru said:
Well the APM is included in LeeDrOiD Shortcutter as far as I can tell. Will check for the back to kill thingy.
Click to expand...
Click to collapse
Yes you are right Buddy, I forgot all about that app. I have it installed even. Thank you very much. It is working.
LibertyMonger said:
Yes you are right Buddy, I forgot all about that app. I have it installed even. Thank you very much. It is working.
Click to expand...
Click to collapse
check your PM when you have a chance
Related
Is there a way/mod for S4 I9505 to have NFC to work while screen off or locked?
myname70 said:
Is there a way/mod for S4 I9505 to have NFC to work while screen off or locked?
Click to expand...
Click to collapse
There is an Xposed module for that.
I haven't tried it yet on the S4 and the download site is down ATM.
You can also try the MoDaCo Toolkit, that has that module in it too
I'm interested. It was very useful in my Galaxy S3.
kantjer said:
There is an Xposed module for that.
I haven't tried it yet on the S4 and the download site is down ATM.
You can also try the MoDaCo Toolkit, that has that module in it too
Click to expand...
Click to collapse
Thanks. I downloaded and installed MoDoCo toolkit Pro. Clickec to activate the NFC. But nothing happens.. Even it did not ask me for root access... maybe does not work on i9505? Anyone tried it? here is the .apk file https://www.dropbox.com/s/a868pkg3hcy76nc/com.modaco.toolkit.apk
myname70 said:
Thanks. I downloaded and installed MoDoCo toolkit Pro. Clickec to activate the NFC. But nothing happens.. Even it did not ask me for root access... maybe does not work on i9505? Anyone tried it? here is the .apk file https://www.dropbox.com/s/a868pkg3hcy76nc/com.modaco.toolkit.apk
Click to expand...
Click to collapse
Could be, this is from the MoDoCo change log:
Note that the NFC on screen off functionality is tested against AOSP and may not work if your device manufacturer has fritzed with the NFC code a lot.
Click to expand...
Click to collapse
The module is loaded at boot, so no root access is being asked for that. The Xposed installer will need root access though.
Also Xposed requires a specific order in how to install thing.
First install Xposed installer, than install/update from the Xposed installer and reboot.
Then install the module, MoDoCo in this case, activate it in Xposed and reboot again.
kantjer said:
Could be, this is from the MoDoCo change log:
The module is loaded at boot, so no root access is being asked for that. The Xposed installer will need root access though.
Also Xposed requires a specific order in how to install thing.
First install Xposed installer, than install/update from the Xposed installer and reboot.
Then install the module, MoDoCo in this case, activate it in Xposed and reboot again.
Click to expand...
Click to collapse
Could you send me Xposed module? I cannot find it.
Sent from my GT-I9505 using xda premium
myname70 said:
Could you send me Xposed module? I cannot find it.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
Xposed
kantjer said:
Could be, this is from the MoDoCo change log:
The module is loaded at boot, so no root access is being asked for that. The Xposed installer will need root access though.
Also Xposed requires a specific order in how to install thing.
First install Xposed installer, than install/update from the Xposed installer and reboot.
Then install the module, MoDoCo in this case, activate it in Xposed and reboot again.
Click to expand...
Click to collapse
I did exactly as you advised. All installed. But the options I activated in the MoDoCo - do not work...
Sent from my GT-I9505 using xda premium
myname70 said:
I did exactly as you advised. All installed. But the options I activated in the MoDoCo - do not work...
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
Could anyone try this mod and advise if NFC works on screen OFF?
Check this thread out.
http://forum.xda-developers.com/showthread.php?p=41597243#post41597243
Optimal
myname70 said:
Could anyone try this mod and advise if NFC works on screen OFF?
Click to expand...
Click to collapse
I can confirm that it works. I installed the xposed framework, then I installed the modaco toolkit. I then enabled the NFC screen off module in the modaco toolkit; then I enabled the module in the xposed framework and rebooted the phone. Works like a charm!
Deleted
An alternative to Modaco would be nottach's xposed module for the att gs4. I'm using it on my t-mobile stock rooted galaxy s4 and screen off nfc works just fine, as well as several other features. Here's the thread, detailed install instructions are in it as well: http://forum.xda-developers.com/showthread.php?t=2285074
First post, hope this helps someone
myname70 said:
Could anyone try this mod and advise if NFC works on screen OFF?
Click to expand...
Click to collapse
I did this and it's working for me, but I'm running CM10.1 with Chronic Kernel.
Hi there, I'm on Omega v11 - ZHUDMH6 with Samsung Galaxy S4 I9505 . I wonder if your older version for screen off would work?
is there also a mod for the Galaxy S4 mini (i9195).
I want to use the nfc in standby!
FreedomRunner said:
is there also a mod for the Galaxy S4 mini (i9195).
I want to use the nfc in standby!
Click to expand...
Click to collapse
use this http://forum.xda-developers.com/showthread.php?t=2122019
it works great with my S4 mini on cyanogenmod 10.2
This is not my app, just sharing what is good.
I know this has been out awhile and many of you guys have already tried this, but this is for those who have not tried/heard/read/drank it.
Not guarantee to work on all rom!!!! <<<<<<< Read this!!!
[FRAMEWORK ONLY!] Xposed - ROM modding without modifying APKs (2.3.1)(10.10.2013)
Here's a link to the apk. You could also get the link from the above thread.
Here's the index to all the mods that it has to offer.
It's actually pretty simply to use. Just download and install Xposed Installer APK. A reboot is needed.
Then install the module. It is possible to download and install the modules from the app itself by selecting download. Remember to enable them in modules. A second reboot is required.
Open the modules u install and mod your device the way u like it to be.
1. Install exposed installer apk
2. Reboot
3. Download and install modules
4. Enable modules
5. Reboot
6. You are ready to mod
****make a nandroid backup before attempting this
Click to expand...
Click to collapse
Tips:
I tried GravityBox and change the softkey, disable led while charging, quick unlock using pin without keying enter and among other things.
This is only one the many other modules out there.
Use Xposed Additions to remap soft keys. GravityBox offers the same feature but doesn't have remap for search key.
****make a nandroid backup before attempting this
MIUI V5
If you're using miui V5, use version 2.1.8 and do not update. on 2.2.1 i had bootloops after reboot.
Using xposed addition fix the non functioning search button.
And there are a few other modules that you can use to customized your phone.
Click to expand...
Click to collapse
All credits to the author and creator of the installer and modules.
Works on Sense 3.5 - 4.0
Using tweakbox module :good:
Not working on latest MIUIv5 3.11.8 (provides bootloops)
Anyone with SVHD 2.1.0 before I try?
Sent from my HTC Desire S using xda app-developers app
ishahxeb said:
Anyone with SVHD 2.1.0 before I try?
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
Currently on Desire xs by thantos2024. I'm using xbutton action and xbattery themer, both are working fine. xposed addition seems to give some pop up toast massage asking for a restart, so i wouldnt recommend that. Seems to happen only on sense rom, was on viper and it gave the some toast msg.
Unfortunately only are few mods are available for sense.
If anythings gets mess up, just reflash the rom wiping only dalvik and cache. or make a nandroid backup.
#Fear said:
Currently on Desire xs by thantos2024. I'm using xbutton action and xbattery themer, both are working fine. xposed addition seems to give some pop up toast massage asking for a restart, so i wouldnt recommend that. Seems to happen only on sense rom, was on viper and it gave the some toast msg.
Unfortunately only are few mods are available for sense.
If anythings gets mess up, just reflash the rom wiping only dalvik and cache. or make a nandroid backup.
Click to expand...
Click to collapse
Hi #Fear
Thanks for the information
Still, I'll have a go with it followed by my feedback.
Cheers!
Sent from my HTC Desire S using xda app-developers app
yeah.. for sense user there is a limitation.. not all the modules work..
ishahxeb said:
Anyone with SVHD 2.1.0 before I try?
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
Hi, I'm on svhd but with desense mod. The tweakbox works for me, but I haven't tried any others. Just use it to change my status bar color as you could see in the “post your screen“ thread.
otterbvrn said:
yeah.. for sense user there is a limitation.. not all the modules work..
Click to expand...
Click to collapse
+1
Does anyone know if this is possible?
Actually, does anyone know if any of these are possible?
1.) Replace the Visually Built-In SuperUser with SuperSU found in the ROM Settings.
2.) Completely Remove/Uninstall SuperUser from ROM Settings so that it can no longer be seen or found.
If so, would you please be so kind in posting a simple tutorial?
Thanks so much in advance!
You would have to decompile the settings apk and remove the header for the superuser app. Then you would need to create a new header linked to an intent that would open the SuperSU package. Not really worth the amount of work if you ask me.
You do realize that by flashing SuperSU on top of a rom that already has superuser built in, superuser is completely removed and replaced by SuperSU regardless of the fact that it still has a header in the settings.
Chromium_ said:
You would have to decompile the settings apk and remove the header for the superuser app. Then you would need to create a new header linked to an intent that would open the SuperSU package. Not really worth the amount of work if you ask me.
You do realize that by flashing SuperSU on top of a rom that already has superuser built in, superuser is completely removed and replaced by SuperSU regardless of the fact that it still has a header in the settings.
Click to expand...
Click to collapse
After reading your very much appreciated response, I take it that neither of these can be done neither quick or easy.
Thank you and yes I do understand that, but I atleast want to remove it if I can't replace it. For me personally, it sticks out like a swore thumb.
I truly think that even if only one of these were available, countless people would appreciate it. When researching this I found nearly endless posts on the subject where users were trying to do something of the matter. Sounds like it might be worth it?
xnickfx said:
After reading your very much appreciated response, I take it that neither of these can be done neither quick or easy.
Thank you and yes I do understand that, but I atleast want to remove it if I can't replace it. For me personally, it sticks out like a swore thumb.
I truly think that even if only one of these were available, countless people would appreciate it. When researching this I found nearly endless posts on the subject where users were trying to do something of the matter. Sounds like it might be worth it?
Click to expand...
Click to collapse
Upload your Settings apk and I'll take a quick look to see if I can do it. No guarantees, but I can try
Chromium_ said:
Upload your Settings apk and I'll take a quick look to see if I can do it. No guarantees, but I can try
Click to expand...
Click to collapse
I apologize for my late reply. I wasn't aware that anyone has made a post after my last.
Anyway, just recently I discovered Xposed Framework and its awesome potential, so I am now using SuperSU and using Google's stock 4.4.2 ROM.
I really appreciate you offering to help me, that's really cool thank you. Now that I'm on the stock 4.4.2 ROM my only desire to still do this would be to implement/embed my SuperSU app into my settings which I think would be so cool seeing that its an original stock ROM. Similar to the way the custom CM ROMs do it but not the way they prompt you for root permission, I would simply like to keep the way SuperSU does it with its popup.
If you are still help me with this and willing to give it a shot, that would be really cool and I would feel pretty special having being the only one with SuperSU embedded into stock ROM settings . If you are still willing to attept something like this please let me know as I would be stoked having the original SuperSU embeded into the settings of the original 4.4.2 stock ROM . Thanks a lot!
xnickfx said:
I apologize for my late reply. I wasn't aware that anyone has made a post after my last.
Anyway, just recently I discovered Xposed Framework and its awesome potential, so I am now using SuperSU and using Google's stock 4.4.2 ROM.
I really appreciate you offering to help me, that's really cool thank you. Now that I'm on the stock 4.4.2 ROM my only desire to still do this would be to implement/embed my SuperSU app into my settings which I think would be so cool seeing that its an original stock ROM. Similar to the way the custom CM ROMs do it but not the way they prompt you for root permission, I would simply like to keep the way SuperSU does it with its popup.
If you are still help me with this and willing to give it a shot, that would be really cool and I would feel pretty special having being the only one with SuperSU embedded into stock ROM settings . If you are still willing to attept something like this please let me know as I would be stoked having the original SuperSU embeded into the settings of the original 4.4.2 stock ROM . Thanks a lot!
Click to expand...
Click to collapse
Sure, but the problem is that since you are now on stock rom, the phone is now odexed. Each apk has a corresponding odex file, which makes it tougher to modify stuff like this. If you could switch the stock deodexed rom it might make this possible.
Chromium_ said:
Sure, but the problem is that since you are now on stock rom, the phone is now odexed. Each apk has a corresponding odex file, which makes it tougher to modify stuff like this. If you could switch the stock deodexed rom it might make this possible.
Click to expand...
Click to collapse
It is the same with odexed as well. We need to add the manifest name of the su app to the settings header. Add png of size, add strings and done. 5 min job and chromium, nice to talk to you
Sent from my Nexus 5 using XDA Premium 4 mobile app
Jishnu Sur™ said:
It is the same with odexed as well. We need to add the manifest name of the su app to the settings header. Add png of size, add strings and done. 5 min job and chromium, nice to talk to you
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh, for some reason I thought that odexed ROMs needed some extra things done for apk modifications. Sorry for the misinformation.
I am running Mahdi ROM, latest version came with Superuser. I prefer SuperSU as it gets updated and maintained more often, so I flashed the latest (1.91) update zip and now I have both. It did not remove the integrated Superuser that came with the ROM settings.
Chromium_ said:
Oh, for some reason I thought that odexed ROMs needed some extra things done for apk modifications. Sorry for the misinformation.
Click to expand...
Click to collapse
No worries Actually the smali folder we see in the deodexed app is the same .odex file intergrated into 1 file..
xnickfx said:
Does anyone know if this is possible?
Actually, does anyone know if any of these are possible?
1.) Replace the Visually Built-In SuperUser with SuperSU found in the ROM Settings.
2.) Completely Remove/Uninstall SuperUser from ROM Settings so that it can no longer be seen or found.
If so, would you please be so kind in posting a simple tutorial?
Thanks so much in advance!
Click to expand...
Click to collapse
If you install supersu the builtin superuser wont work anymore. So no problem
Sent from my Nexus 5 using XDA Premium 4 mobile app
I noticed there is no xposed module or gravitybox for the Droids. Can we just use the Moto X stuff and it will work the same?
Sauveur said:
I noticed there is no xposed module or gravitybox for the Droids. Can we just use the Moto X stuff and it will work the same?
Click to expand...
Click to collapse
?
everything works except for device specific ones (i.e. xperia, Samsung, etc.)
livinitwarrior said:
?
everything works except for device specific ones (i.e. xperia, Samsung, etc.)
Click to expand...
Click to collapse
Ah, thanks. I didn't realize that it's just a general Gravity Box for each version of Android
Sauveur said:
Ah, thanks. I didn't realize that it's just a general Gravity Box for each version of Android
Click to expand...
Click to collapse
not a problem!
Remember xposed also won't work with art.
Sent from my XT1080 using Tapatalk
Where can i download the gravitybox for my Maxx on 4.2.2? I tried downloading it from the xposed installer>download menu, it installs, but won't open. Gives an error:
"GravityBox system framework not responding. Exiting."
I downloaded GravityBox(by [email protected]) for JB ver. 2.9.4
Thanks
tCizler said:
Where can i download the gravitybox for my Maxx on 4.2.2? I tried downloading it from the xposed installer>download menu, it installs, but won't open. Gives an error:
"GravityBox system framework not responding. Exiting."
I downloaded GravityBox(by [email protected]) for JB ver. 2.9.4
Thanks
Click to expand...
Click to collapse
Do you have any other modules already working?
If not, after you installed "xposed installer", did you install the framework from within the app? you should have installed the framework and been prompted to reboot. then you install gravity box, and make sure to check the box next to it in the modules menu (may require another reboot, i do not recall). After this you will be able to change the settings within gravity box (some / most changes also require a reboot to take effect)
Teksu said:
Do you have any other modules already working?
If not, after you installed "xposed installer", did you install the framework from within the app? you should have installed the framework and been prompted to reboot. then you install gravity box, and make sure to check the box next to it in the modules menu (may require another reboot, i do not recall). After this you will be able to change the settings within gravity box (some / most changes also require a reboot to take effect)
Click to expand...
Click to collapse
Yes i have another module running. I know about rebooting and all, it just wouldn't work for me. After some searching, it was suggested that i try an older version. I installed version 2.7.2 and it works. Just seems a little less refined, but atleast it works.
tCizler said:
Yes i have another module running. I know about rebooting and all, it just wouldn't work for me. After some searching, it was suggested that i try an older version. I installed version 2.7.2 and it works. Just seems a little less refined, but atleast it works.
Click to expand...
Click to collapse
The newest version works with my 4.2.2 Maxx just fine. Did you remove write protection?
Sent from my XT1080 using Tapatalk
Sauveur said:
The newest version works with my 4.2.2 Maxx just fine. Did you remove write protection?
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Yes I did... No idea why mine doesn't work. I've just settled for an older version
Sent from Droid Maxx
Will Xposed and gravity box work on rooted 4.4?
Sent from my XT1080 using Tapatalk
an21281 said:
Will Xposed and gravity box work on rooted 4.4?
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Xposed 2.41 and gravitybox 2.92 working fine on my 4.4 Maxx.
Sent from my XT1080
xjack said:
Xposed 2.41 and gravitybox 2.92 working fine on my 4.4 Maxx.
Sent from my XT1080
Click to expand...
Click to collapse
Thanks, installed Xposed and gravitybox with no problems! Just wanted to double check, didn't want to risk a boot loop or brick in and loose root...
Sent from my XT1080 using Tapatalk
This thread is old but does anyone else thats using GravityBox not have the option in the settings for Notification Drawer Style missing the option to set the Custom Image? Only options that seem to work are Default Background and Color Fill.
TULOA said:
This thread is old but does anyone else thats using GravityBox not have the option in the settings for Notification Drawer Style missing the option to set the Custom Image? Only options that seem to work are Default Background and Color Fill.
Click to expand...
Click to collapse
Nevermind it miraculously showed up somehow.
Anybody know if this is available yet for our phone. I used to have this and it was great. I especially liked it for allowing YouTube to play in the background.
Sent from my HTC U11 using Tapatalk
bambam1978 said:
Anybody know if this is available yet for our phone. I used to have this and it was great. I especially liked it for allowing YouTube to play in the background.
Click to expand...
Click to collapse
Yes, as long as you're rooted with Magisk. Download the SDK 26 framework version if you're on Oreo.
If you're only interested in background playing for YouTube, there is a Magisk module for that, too, so you wouldn't need Xposed. I'm only running it for GravityBox so I couid change a few SystemUI components.
Additional info from the screenshots. Check the official Magisk and Xposed XDA threads for any downloads you may need.
hx3 said:
Additional info from the screenshots. Check the official Magisk and Xposed XDA threads for any downloads you may need.
Click to expand...
Click to collapse
Really appreciate the help!
Sent from my HTC U11 using Tapatalk
Seems the magisk module isn't working to keep YouTube open in the background. I'll try the xposed now.
Sent from my HTC U11 using Tapatalk
bambam1978 said:
Seems the magisk module isn't working to keep YouTube open in the background. I'll try the xposed now.
Click to expand...
Click to collapse
Strange... Works fine on my end. You may need to fully uninstall YouTube first, then install the Magisk module and reboot. A reboot after uninstalling YouTube may be helpful, too. Also, when I install an updated LeeDroid ROM, I choose not to install YouTube during the Aroma setup process. Then through Magisk, I install the background YouTube module.
You can use Firefox with this plugin:
https://addons.mozilla.org/en-US/firefox/addon/video-background-play-fix/
Click to expand...
Click to collapse
Also you can use Firefox in desktop version to let Youtube run in background.