(Share)(Tweaks) tweaks for msm extended rom - Xiaomi Redmi Note 4 [Snapdragon] ROMs, Kernels, Re

I am not the developer I am just Sharing the zip
Tweak pack for MSM Xtended ROM:-
flashable zip include
- xenial kernel
- busybox 1.28.4
- gps Tweaks
- magisk 16.6
- simple gapps
- enable doze gapps
- port google framework
- port bravia engine display
- port trimulos engine display
- port asus launcher
- port mizo keyboard
- port es file exploler
- init.d injector
- alfin tweaks v1.3 Beta
- adsblock
simple set profile
- battery (default)
- balance
- performance
set displays
- amoled display
- super amoled display
- yellow display
tweaks feature
- enable google doze
- force deep sleep
- ram cache booster
- fstrim /data
- fstrim /cache
- fstrim /system
- sqlitedb /data
- sqlitedb /cache
- sqlitedb /system
- set cpu governor
- set cpu frequensi
- set gpu governor
- set gpu frequensi
- set io scheduler
- set io speed
- enable msm thermal
- enable cpu hotplug
- enable cpu power efficient
- enable andreno idler
- entropy generatos
- disable fsync
- reduce phone vibrator
- disable enable usb fast charge
- disable yellow flash
- big cache allocation
- big cache reclaiming
- disable kernel panic
- disable wake up
- disable swap
- disable zram
- battery saving mod
- Fix Bad voice quality in calls
- Better call voice quality
- Disable blackscreen after call
- Disable notification while adb is active
- Better scrolling
- Improve touchscreen
- more ram
- Increase picture JPEG
- Increase video recording & picture
- Increase flash camera
- Increase media quality
- Volume steps increase
- Telephon & ringtone tweaks
- Disable google & network location
- enabled support bravia engine
- enabled bravia engine
- enabled support for ipv4 & ipv6
- better signal
- fast streaming video
- disable kernel error checking
- disable strict mode checking
- sensor sleep control
- power saving
- reduce dirty ratio
- disable kill allocating task
- better image quality
- wify sleeper
- disable sending usage data
- disable logcat
- disable debug log
- disable tuner
- enabled button light timeout
- enabled youtube display 4K
- gpu render booster
- lock ram home screen
- qualcom assertive display
- persist.sys.force_highendgfx
- selinux permissive
- fps unlocked
- fast booting
- fast reboot
- no boot animation
- big deep buffers network
- Increase game speed
How to flash it?
Wipe dalvik cache and cache,
Wipe data and system,
And flash the newest version of MSM Xtended v9,
Flash gapps,
Flash this pack,.
And Reboot
Here is a link:
https://drive.google.com/file/d/1d4v099BJz5qAjyF-1HMRWVKbkprvGJtL/view?usp=sharing
Credits-? problem in credit I don't know who is the developer

mk24268 said:
I am not the developer I am just Sharing the zip
Tweak pack for MSM Xtended ROM:-
flashable zip include
- xenial kernel
- busybox 1.28.4
- gps Tweaks
- magisk 16.6
- simple gapps
- enable doze gapps
- port google framework
- port bravia engine display
- port trimulos engine display
- port asus launcher
- port mizo keyboard
- port es file exploler
- init.d injector
- alfin tweaks v1.3 Beta
- adsblock
simple set profile
- battery (default)
- balance
- performance
set displays
- amoled display
- super amoled display
- yellow display
tweaks feature
- enable google doze
- force deep sleep
- ram cache booster
- fstrim /data
- fstrim /cache
- fstrim /system
- sqlitedb /data
- sqlitedb /cache
- sqlitedb /system
- set cpu governor
- set cpu frequensi
- set gpu governor
- set gpu frequensi
- set io scheduler
- set io speed
- enable msm thermal
- enable cpu hotplug
- enable cpu power efficient
- enable andreno idler
- entropy generatos
- disable fsync
- reduce phone vibrator
- disable enable usb fast charge
- disable yellow flash
- big cache allocation
- big cache reclaiming
- disable kernel panic
- disable wake up
- disable swap
- disable zram
- battery saving mod
- Fix Bad voice quality in calls
- Better call voice quality
- Disable blackscreen after call
- Disable notification while adb is active
- Better scrolling
- Improve touchscreen
- more ram
- Increase picture JPEG
- Increase video recording & picture
- Increase flash camera
- Increase media quality
- Volume steps increase
- Telephon & ringtone tweaks
- Disable google & network location
- enabled support bravia engine
- enabled bravia engine
- enabled support for ipv4 & ipv6
- better signal
- fast streaming video
- disable kernel error checking
- disable strict mode checking
- sensor sleep control
- power saving
- reduce dirty ratio
- disable kill allocating task
- better image quality
- wify sleeper
- disable sending usage data
- disable logcat
- disable debug log
- disable tuner
- enabled button light timeout
- enabled youtube display 4K
- gpu render booster
- lock ram home screen
- qualcom assertive display
- persist.sys.force_highendgfx
- selinux permissive
- fps unlocked
- fast booting
- fast reboot
- no boot animation
- big deep buffers network
- Increase game speed
How to flash it?
Wipe dalvik cache and cache,
Wipe data and system,
And flash the newest version of MSM Xtended v9,
Flash gapps,
Flash this pack,.
And Reboot
Here is a link:
https://drive.google.com/file/d/1d4v099BJz5qAjyF-1HMRWVKbkprvGJtL/view?usp=sharing
Credits-[emoji53] problem in credit I don't know who is the developer
Click to expand...
Click to collapse
Just for xtented ? Can i use this tweak for others rom?
Sent from my Redmi Note 4 using Tapatalk

I installed that zip...bootloops all The time
Enviado de meu Redmi Note 4 usando o Tapatalk

Where is the original thread?

minta akses
ijin akses

.12.

Related

[Q] phone stops sending/receiving calls after some time

Hi,
I have xda orbit II with 3LIT3_VIII_Full_WWE rom and 1.65.30.09 radio.
I was running with this setup for a year or so,
Lately i have a problem making/receiving calls. If i receive a - i can see that the phone is ringing but when i answer the call it is not connected.
If i try to make a call i see that the phone is dialing but it will not connect.
When this happens i need to soft reset the phone and then it is ok for some time.
I thought to upgrade to one of the 6.5 roms but they all say i need to downgrade my radio version - do i do it the same way as new rom?
Can anyone suggest what to do to solve this problem?
davidez2 said:
Hi,
I have xda orbit II with 3LIT3_VIII_Full_WWE rom and 1.65.30.09 radio.
I was running with this setup for a year or so,
Lately i have a problem making/receiving calls. If i receive a - i can see that the phone is ringing but when i answer the call it is not connected.
If i try to make a call i see that the phone is dialing but it will not connect.
When this happens i need to soft reset the phone and then it is ok for some time.
I thought to upgrade to one of the 6.5 roms but they all say i need to downgrade my radio version - do i do it the same way as new rom?
Can anyone suggest what to do to solve this problem?
Click to expand...
Click to collapse
you should try to use Advanced Configuration Tool v3.30 first
before you downgrade radio
here Main features Advanced Configuration Tool
v3.30:
* Extensible tweak list
* Multi-devices support
* Multi-languages support
* Customize key mapping
* Customize file associations
* Custumize ClearType settings
* Customize connection settings
* Customize HTC Comm Manager
* Customize HTC TouchFLO 3D
* Import/export settings using provisioning XML
* User Interface
- Animate windows
- Window animations frames
- Window animations delay
- Animate menus
- Vertical scrollbar width
- Vertical scroll arrow height
- Horizontal scrollbar height
- Horizontal scroll arrow width
- Horizontal icon spacing
- Vertical icon spacing
- Icon title font size
- Menu bar font size
- Popup menu font size
- Use long delay for gestures
* Today
- Single line Date plug-in
- Show clock/battery on title bar
- Show Power icon
- Show Wireless Manager icon
* Performances
- File system cache
- File system cache size
- File system filter cache
- PNP unload delay
- PNP wait I/O delay
- Glyph cache
* Power Management
- SD Memory power management
- MMC Memory power management
- NAND Memory power management
- SIM Memory power management
- AsyncMAC power management
- IrSIR power management
- PPTP power management
- L2TP power management
- USB charging
- Show moving charge bar
- AC resuming from suspend timeout
- Battery resuming from suspend timeout
* Screen
- Show Orientation settings
- Landscape mode
- Landscape fixed
- Aut- device lock
- Aut- device lock timeout
- Dim backlight in unlock screen
- Backlight lock level
* Input
- Keyboard layout
- Slide wake up
- Keyboard backlight timeout
- Suggested words
* Network
- Device friendly name
- Max TCP Connect Retransmissions
- Max TCP Data Retransmissions
- TCP window size
- DHCP
- Validate server certificate
- WPA authentication
- Wi-Fi scan interval
- Wi-Fi delay after boot
- Turn off Wi-Fi if n- activity
- Wi-Fi aut- off timeout
* Phone
- Phone skin
- Enable vide- calls
- Answer using any key
- Face down mute ring
- Phone sleep during call
- Fast sleep during call
- End call delay
- Call progress idle timeout
- Call ID match
- Shows all call history in dialer
- Max entries in call history
- Call history clean period
- Show SIM contacts
- Purge SIM contacts when n- SIM
- DTMF support
- Show Battery icon
- Show Band page
- Show PIN2 page
- Show NITZ page
- Show TTY page
- Show ALS page
- Use EONS
- CPHS override
- 3G prefix in operator name
- 3G prefix text
* Bluetooth
- Bluetooth device name
- OBEX
- Use Joint Stereo
- Bitpool
- Maximum supported bitpool
- Minimum supported bitpool
- Sample rate
- Audi- gateway service
- Audi- gateway power save
* GPS
- Assisted GPS
- Log file
- Old log file
- Max. log file size
* Data Connections
- GPRS aut- attach
- GPRS disconnect
- EDGE icon
- HSDPA icon
- Legacy GPRS notification
- HSUPA support
- Private interface for Internet Sharing
* Internet Explorer
- User Agent custom base
- 4-way navigation
- ClearType
- Delay image load
- Block static ActiveX
- Play background sounds
- Show script errors
- URL Prefix
- URL suffix
- Links t- keep
- Search page
- Maximum connections per server
- Proxy Aut- Detection
* Messaging
- Threaded SMS
- SMS sent notification
- SMS delivery notification
- Wake up on new SMS
- SMS Unicode support
- SMS recipients limit
- Max deleted SMS
- Sync Sent Items
- SMS callback number
- SMS priority
- Show roam warning
* Calendar
- Show lunar calendar
- Show events text in Week view
- Holiday category
- Today Item
* Camera
- Save location
- Burst mode
- Theme Phot- mode
- Sport mode
- Vide- Share mode
- GPS Phot- mode
- Max size in Burst mode
- Max size in Sport mode
- Encode photos in portrait mode
- Capture Key Delay
- Key Delay
- Capture Key Delay Time
* Locations
- Program Files folder
- My Documents folder
- Application Data folder
- Desktop folder
- Programs folder
- StartUp folder
- Recent folder
- Favorites folder
- Fonts folder
- Default storage location for image files
- Default storage location for audi- files
- Default storage location for vide- files
- Default storage location for downloads
- Internet Explorer cache location
- Internet Explorer cookies location
- Internet Explorer history location
* Task Manager
- Refresh interval
- CPU usage refresh interval
* Voice Command
- Respect key lock
- Default TTS rate
* Windows Live
- Live Search URL
* Splash screen
- MS splash screen on startup
- MS splash screen on shutdown
- Carrier splash screen on startup
- Carrier splash screen on shutdown
- MS timeout on startup
- MS timeout on shutdown
- Carrier timeout on startup
- Carrier timeout on shutdown
* HTC Animation
- Animation
- Volume
- GIF file
- WAV file
- Startup GIF file
- Startup WAV file
- Shutdown GIF file
- Shutdown WAV file
- GIF animation speed
- Play shutdown animation
* HTC TouchFLO
- Scrolling
- Cube
- Sound
- Pressure threshold
- Finger Pressure
- High scrolling speed
- Low scrolling speed
* HTC TouchFLO 3D
- Show logo
* HTC Home
- Lock position
- Always open E-mail folder
- Weather location
- Weather location code
* HTC Audi- Manager
- Music player volume
* HTC Music plug-in
- Default music player
* HTC Audi- Booster
- Bass Level
- Treble Level
- 3D Sound Level
* HTC Camera Album
- OK button
- Show Camera icon
* HTC AT Debug Log
- HTC Debug Log
- Log mode
- RAM size
- File index
- File size
* G-sensor
- G-sensor polling interval
* Light sensor
- Light sensor polling
- Light sensor polling interval
- Light sensor threshold
- Light sensor threshold t- turn screen off
* Miscellaneous
- Security warning
- Delete CAB file after install
- Automatic daylight savings switch-over
- Show daylight saving time notifications

Tweak ROM your Own with single apk (pimp my rom)

This is a amazing app... you can do many things with this.. pl try...
Network & Internet
Wifi Scan interval in seconds
TCP Congestion Algorithm selection
Media streaming tweaks
Use Google DNS servers
Enable/Disable HSUPA
Protect against SYN attacks by hardening your TCP stack
Avoid Time-Wait state
Block all redirects
Block source-routing
Various IPv4 tweaks
Multitasking
3 presets of OOM Groupings (lom/mid/high)
3 presets of Minfree values (low/mid/high)
2 presets of zRam compression (64mb/128mb)
Adjust Dalvik VM to new OOM & Minfrees
Adjust kernel to new OOM & Minfrees
Renice low consumption processes to a softer value
Dalvik VM
VM Heap Size selection
VM Heap Growth-limit selection
VM Heap Start Size selection
Optimization Flags selection, any combination of verification, optimization & register mapping
Force dex optimization on /data only
Enable/Disable Just in Time Compiler (JIT)
Enable/Disable JNI Error Checking
Enable/Disable bytecode verification for Dalvik
Kernel
Governor tweaks
I/O Scheduler tweaks
Disabling I/O stats
Enable/Disable Vertical Synchronization (Vsync)
Disable Normalized Sleepers
Disable New-Fair Sleepers
Disable Gentle-Fair Sleepers
Toggle Android Features
Hardware Acceleration
Force GPU rendering
Surface Dithering
Purgeable Assets
16bit Transparency
Kernel JNI Error Checking
Android Logger
Locking launcher in memory
Telephony
Call Ring Delay
Proximity Sensor delay
In-Call amount of volume steps
SMS & MMS retry timer if failed sending
SMS & MMS amount of retries if failed sending
Enable/Disable AMR Wideband (a.k.a HD Voice)
Touchscreen & Display
Amount of fingers recognized by the screen (multitouch)
Minimum amount of time between 2 touch events (Pointer Duration)
Maximum amount of events per second WindowsManager can handle
SurfaceFlinger's minimum velocity
SurfaceFlinger's maximum velocity
Enable/Disable FPS Capping
Miscellaneous
Optimize sqlite3 databases at each boot
I/O Tweaks for ext4 file-systems
Internal & External sdcard tweaks
Zipalign all apks at each boot
Various battery saving tweaks
Various camera quality tweaks
Raising jpg quality to 100%
Enable quickpoweron
download latest pimp my rom alpha PimpMyRom-alpha-3.3.1.apk
hit thanks if i helped..
http://d-h.st/v1m
Can you explain what this app actually do??
you have written something out of brain network, possibly some screenshots or some more elaborated writing could work.
mmxandy said:
This is a amazing app... you can do many things with this.. pl try...
Network & Internet
Wifi Scan interval in seconds
TCP Congestion Algorithm selection
Media streaming tweaks
Use Google DNS servers
Enable/Disable HSUPA
Protect against SYN attacks by hardening your TCP stack
Avoid Time-Wait state
Block all redirects
Block source-routing
Various IPv4 tweaks
Multitasking
3 presets of OOM Groupings (lom/mid/high)
3 presets of Minfree values (low/mid/high)
2 presets of zRam compression (64mb/128mb)
Adjust Dalvik VM to new OOM & Minfrees
Adjust kernel to new OOM & Minfrees
Renice low consumption processes to a softer value
Dalvik VM
VM Heap Size selection
VM Heap Growth-limit selection
VM Heap Start Size selection
Optimization Flags selection, any combination of verification, optimization & register mapping
Force dex optimization on /data only
Enable/Disable Just in Time Compiler (JIT)
Enable/Disable JNI Error Checking
Enable/Disable bytecode verification for Dalvik
Kernel
Governor tweaks
I/O Scheduler tweaks
Disabling I/O stats
Enable/Disable Vertical Synchronization (Vsync)
Disable Normalized Sleepers
Disable New-Fair Sleepers
Disable Gentle-Fair Sleepers
Toggle Android Features
Hardware Acceleration
Force GPU rendering
Surface Dithering
Purgeable Assets
16bit Transparency
Kernel JNI Error Checking
Android Logger
Locking launcher in memory
Telephony
Call Ring Delay
Proximity Sensor delay
In-Call amount of volume steps
SMS & MMS retry timer if failed sending
SMS & MMS amount of retries if failed sending
Enable/Disable AMR Wideband (a.k.a HD Voice)
Touchscreen & Display
Amount of fingers recognized by the screen (multitouch)
Minimum amount of time between 2 touch events (Pointer Duration)
Maximum amount of events per second WindowsManager can handle
SurfaceFlinger's minimum velocity
SurfaceFlinger's maximum velocity
Enable/Disable FPS Capping
Miscellaneous
Optimize sqlite3 databases at each boot
I/O Tweaks for ext4 file-systems
Internal & External sdcard tweaks
Zipalign all apks at each boot
Various battery saving tweaks
Various camera quality tweaks
Raising jpg quality to 100%
Enable quickpoweron
download latest pimp my rom alpha PimpMyRom-alpha-3.3.1.apk
hit thanks if i helped..
http://d-h.st/v1m
Click to expand...
Click to collapse
Nice Application for tweaks........
there no need to screenshot.. its very popular app.

[R] Custom kernel for 6.0/.1

Could someone make a custom kernel which has the features i will list below?
Double tap to wake, (do not include swipe to wake)
Headphone/speaker gain
Xz compressed/ tweaked ramdisk (gzip)
Removed any logs/loggers
Undervolt options
Disabled mpdecision
Tunable vibration strength
Back light dimmer/ able to dim it below factory settings
Fast charge
Init.d support
Over clock to between max and min potential
Lionheart/bioshock schedulers
random (aosp/cm/anything) boot logo
Selinux needs to be permissive
Brighter tourch power
Any audio mods/tweaks
Battery enhancements if anyone can think of what ones would be suitable
Any other tweaks you might think of
Thanks

[ROM][OFFICIAL][11.0] SpiceOS 3.4 [jasmine_sprout] [4.19]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SpiceOS is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device.
SpiceOS is based on the LineageOS Project with extra contributions from many people within the Mallu Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
​​
Kernel source code: Jasmine-Wayne-4-19/android_kernel_xiaomi_sdm660_4.19
Our Source code is available in the SpiceOS Github repo
Base source code is available in the LineageOS Github repo.
Working:
Camera (and flashlight)
WiFi
Battery LED
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
VOLTE
VOWIFI
Hotspot
Broken:
You tell me whats broken with logs
Basic Stuffs​
Basic LineageOS features
More Features
Theme picker
OTA Support
Frequent Updates
Animations & eye candies​
More Fonts
More Accents
Lottiee Animations
Battery Stats Animation
SpiceOS Lottie Animations
StatusBar Customization​
4G/LTE toggle
VoLTE Icons
VoWiFi Icons
Volte/Vowifi Icon Ovveride Toggle
Toggle For Roaming Indicator
Bluetooth Battery Status
Old Style Signal Icon
Data disabled Indictor
Colored Statusbar Icons
QuickSettings Customization​
QS Tile Vibrate
QS Tile Title Customization
QS Headers Images
QS Row&Coloumn Customization
QS panel opacity
Tint QS Tile
Data Usage
Brightness Slider position
Notifications background opacity
Interface Themes​
Colour Bucket
LockScreen Customization​
Lockscreen Lock Icon Toggle
Lockscreen charging Info
20 LS Clocks
Charging animation
Lockscreen background blur
Misc​
Icon Pack Support
3 Finger Screenshot
Gaming Mode
Disable H/W keys
Adaptive Playback
Back gesture animation toggle
Colored Statusbar Notification icons
Volume Steps Customization
Smart Charging
Ambient Pulse
Edge Ligting
Pulse Navbar
Volume Panel Customization
Kill button to notification guts
DataSwitchTile
Compatibility:​​Xiaomi Mi A2​
​
Download links
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery
Format /system,/data and /cache
Install SpiceOS zip package
Change Slot and Reboot & Let the Rom Boot
Use adb and boot into Twrp Flash Gapps and Magisk(Only Version 21 & above)
Telegram Community
LineageOS team
AOSP
SpiceOS Community
CrDroid
AOSPA
PixysOS
SuperiorOS
BlissROM​
XDA:DevDB Information
[ROM][OFFICIAL][11.0] SpiceOS 2.0 Beta [jasmine_sprout], ROM for the Xiaomi Mi A2
Contributors
Anush02198, Manish4586, Nebrassy, rcstar6696 & Odsazib
Source Code: https://github.com/SpiceOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Current Beta Version: 2.0
Beta Release Date: 2020-11-14
Created 2020-11-14
Last Updated 2020-11-28
Initial Build
Changelogs:-
+ November Security Patch 11.0.0_r17
+ Added FaceUnlock
+ Kernel Upstreamed to V4.4.243
+ sched/fair: Avoid unnecessary active load balance
+ sdm660_audio: use 24.576MHz MCLK
+ ASoC: msm: q6asm: silence logspam
+ drivers: power: add timeouts to wakelocks
+ sound: use clk gear 11 instead of 10
+ ASoC:WCD9335: Enhance SLimbus CLK Gear
+ Optmize audio codec!!
+ Slimbus: incrase more the frequency for better audio quality
+ sched/core: nr_migrate = 128 increases number of tasks to iterate in a single balance run
+ sdm660-common: Switch Skia rendering backend to Vulkan
+ sdm660-common: Add formatted="false" for multiple substitutions
+ Revert "sdm660: Enable GL comp backpressure"
+ sdm660-common: Enable RRO overlays for lineage-sdk and Snap
**NOTE**
There is no TWRP or Gapps Included in this build
CTS is passed but Selinux is Permissive
NEW BUILD UP :-
Changelogs:-
Source side:-
+ LineageOS updates
+ Some more Under the hood changes
+ Added many Fonts and Accents
+ Added flower icon overlay
Device Changelogs :-
+ Kernel Upstreamed to V4.4.246
+ Merge tag 'LA.UM.8.2.r2-03200-sdm660.0'
+ sdm660-common: Enable compositor background blurring
+ Revert "sdm660: Enable GL comp backpressure"
+ sdm660-common: overlay: Update lineage-sdk overlay
+ sdm660-common: Nuke deprecated bluetooth flags
+ Enable Custom audio policy
+ Some Improvements in Pixel powerhal
+ Fixed Call Recording
+ Revert sdm660_audio: use 24.576MHz MCLK
+ Revert drivers: power: add timeouts to wakelocks
+ Revert sound: use clk gear 11 instead of 10
+ Revert ASoC:WCD9335: Enhance SLimbus CLK Gear
+ Revert Optmize audio codec!!
+ Revert Slimbus: incrase more the frequency for better audio quality
+ TWRP is now bundled with the ROM
NEW BUILD UP :-
Changelogs:-
===============
27 NOV 2020
===============
+ Selinux is now Enforcing
+ Lineage Source updates
+ Revert Safailnet
Note :- TWRP is Included in this build
* CTS Bypass requires Magisk Hide*
NEW BUILD IS UP :-
=========================
DEC 20 , 2020
=========================
+ Kernel Upstreamed to V4.4.248
+ Fixed Night Light
+ Updated Twrp to 3.4.0_10
+ Refactor Apex
+ Added Xiaomi Parts
Check Above in Thread to see Whats new
Since SourceForge is down here is the new link for the same build :-
SpiceOS-2.1-BETA-20201220-jasmine_sprout-OFFICIAL.zip
bit.ly
I can't install gapps even via adb
Gapps (i use nikgapps) work with magisk in my case: w/o It i don't see gapps
GGelmi
So must root yah?
New BUILD UP :-
Changelogs :-
=========================
JAN 01 , 2021
=========================
+ SpiceOS V2.2
+ Kernel Upstreamed to V4.4.249
+ mm: speed up mremap by 20x on large regions
+ gcc-sdm660: overclock I2C and SPI to 800mhz
+ net: wireguard: update wireguard to version v1.0.20201221
+ Merge tag 'LA.UM.9.2.r1-01800-SDMxx0.0'
+ mdss: mdp: Default to 258 kcal saturation
+ sdm660-common: Decommonize sensor blob
+ sdm660-common: props: enable vsync and disable backpressure
+ sdm660-common: Update WFD and Time services from LA.UM.9.6.2.r1-02500-89xx.0 (WFD still in WIP)
+ sdm660-common: Update perfd from taimen RP1A.201005.004
SpiceOS 2.2 Changelogs :-
@SpiceOSChannel
You can view and join @spiceoschannel right away.
t.me
ScreenShots :-
@SpiceOSChannel
You can view and join @spiceoschannel right away.
t.me
azkiaslam said:
So must root yah?
Click to expand...
Click to collapse
Yes Magisk Is Compulsary after flashing Gapps
New BUILD UP :-
Changelogs :-
=========================
APR 14 , 2021
=========================
+ SpiceOS V3.0
+ Rebased on latest LOS Source
+ Based On New tree vendor and kernel
+ Added Volume Curves from latest stock MiA2
+ Based on Latest NB kernel
** Only Clean Flash **
* Gapps pre included
* Twrp Pre included
Just installed now,and it`s looks smooth and fluid without any trouble...great work guys! What I only missing is,the edge lightning on a new notification,but I can live without it!
Changelogs:-
+ May Security Ptch
+ Initial 4.19 Build
+ CTS is passed by default
+ Selinux is Enforcing
+ GPS and WFD Fixed
## Gapps n TWRP pre included ##
Known issues
+ Geekbench is not properly compatible for sdm660 4.19 enforcing build yet.
+ Only Clean Flash
+ You cant upgrade from 4.4 to 4.19 via dirty flash (may softbrick your device)
Screenshots : https://t.me/spiceosmia2/6547
Can`t update through OTA to the newest version..
New Build is Up:-
=========================
MAY 15 , 2021
=========================
+ Fixed Thermal instability
+ Fixed Geekbench incompatibilty issues
+ sdm660-common: Switch to OpenGL rendering backend
+ sdm660-common:Update FCM level to 4
+ sdm660-common: increase CPU Boost duration to 140ms
+ sdm660-common: Enable AOSP surfaceflinger
+ sdm660-common: Create dummy libqti-perfd-client
+ sdm660-common:Update Mlipay from miui_MI6X_V12.0.2.0.PDCCNXM
+ sdm660-common:Update drm hidl version
+ sdm660-common: Update esepowermanager Interface version
+ sdm660-common:Kang Thermal values from Wayne Pie
+ sdm660-common: Disabled some scheduling knobs
+ sdm660-common:Remove thermal controller and hardware.thermal
+ msm: kgsl: Remove POPP
+ kernel: Add API to affine IRQs and kthreads to fast CPUs
+ wayne_defconfig:Enable SLMK
+ ARM64: dts: qcom: Disable LPM ipi prediction
+ binfmt_elf.c: use get_random_int() to fix entropy depleting
+ arm64: determine stack entropy based on mmap entropy
+ ARM64/configs: wayne: Enable freq stats
+ drivers: misc: implement usb fast charge mode
+ power: qcom: Force 900mA charging for USB2.0
+ FilesGo is replaced with Los file manager
+ Fixed OTG
Nice work sir
Great rom
New Build is up
Changelogs:-
=========================
JUN 13 , 2021
=========================
+ Kernel Upstreamed to V4.19.194
+ sdm660-common:Update IRQ,Perf,Thermal and Charger blobs from LA.UM.8.2.1.r1-05600-sdm660
+ sdm660-common:Kang WFD Blobs from LA.UM.9.2.r1-01800-SDMxx0.0
+ sdm660-common:Enable zram-writeback job
+ sdm660-common: sepolicy: allow mediaprovider to talk to gpuservice
+ sdm660-common: Build custom audio amplifier
+ sdm660-common: Add custom audio amplifier for TFA amp feedback
+ sdm660-common: overlay-lineage: Limit screen recorder's framerate to 60fps
+ sdm660-common:Address some more sepolicies
+ sdm660-common:Remove Secure Element
+ sdm660-common Downgrade to DRM 1.0
+ Revert "sdm660-common:Update FCM level to 4"
+ Fixed Chrome crahes and DRM issues
+ sdm660-common:Remove Radio property_contexts
+ sdm660-common: Add netutils-wrapper to device compatibility matrix.
+ sdm660:Adress netutils_wrapper denial
+ sdm660-common:Remove un-necesary display blobs
+ sdm660-common: Disable hwc vds in surface flinger
+ sdm660-common: libqti-perfd-client: return a dummy value
+ sdm660-common: libqti-perfd-client: Remove namespace declaration
+ sdm660-common: power-libperfmgr: let power hal start early
+ sdm660-common: Build [email protected] and @4.0
+ sdm660-common: sepolicy: Fix exported_camera_prop denials
+ sdm660-common: sepolicy: Fix userspace_reboot prop denials
+ sdm660-common: Disable sdm rotator downscaler
+ sdm660-common:Build OMX hal
+ Merge tag 'LA.UM.9.2.1.r1-07200-sdm660.0' into data-ipa-cff-mgr
+ hal: Use log/log.h instead of cutils/log.h
+ data-ipa-cfg-mgr: Use generated kernel headers
+ data-ipa-cfg-mgr: Don't build ipacm tests on debug builds
+ data-ipa-cfg-mgr: Remove verbose cflag
+ ipacm: Address ipacm start failure
+ sdm660-common: art quicken = speed
+ sdm660-common:Increase Boot and Recovery partition size
+ sdm660-common:Use Clang 12.0.6
+ sdm660-common: rootdir: fix the zram init process
+ sdm660-common: Stop creating IOP deamon dirs
+ sdm660-common: overlay: Enable VoLTE and VoWIFI for all
+ sdm660-common: Enable debug.performance.tuning
+ sdm660-common: Speed preopt SysUI/Launcher/Settings
+ sdm660-common: Adjust dex2oat thread count after setup wizard
+ sdm660-common: Port dynamic thermal profile implementation from SDM845
+ sdm660-common: DeviceSettings: Make thermal profiles naming completely generic
+ sdm660-common: DeviceSettings: Set dynamic thermal interval to 5 sec
+ sdm660-common: rootdir: Fix permissions for dynamic thermal profile
+ sdm660-common: DeviceSettings: Switch to TaskStackListener
+ sdm660-common: thermal: Regen thermal configs
+ sdm660-common:Add some thermal configs
+ sdm660-common: Drop libgpustats
+ sdm660-common: Update soundtrigger blobs from lemon
+ sdm660-common: Enable soundtrigger hidl hal 2.3
+ sdm660-common: audio: Add built-in/Back mic and remove TelePhony Rx from primary input
+ sdm660-common: audio: Add incall music profile
+ sdm660-common: audio: Enable feature flag for incall music profile
+ sdm660-common:Update ESE blobs from LA.UM.8.2.1.r1-05600-sdm660
+ + Merged CAF LA.UM.9.2.1.r1-07200-sdm660.0
+ drivers: misc: implement usb fast charge mode
+ defconfig: wayne: Enable USB fast charge
+ power: qcom: Force 900mA charging for USB2.0
+ codecs : max98937 : include missing headers
+ arm64/dts: longcheer: Disable DMA Mapping for max98937 explicitly
+ techpack : include longcheer specific configs
+ techpack: audio: max98937: adapt for kernel 4.19
+ codecs: max98937: fix debug_fs compilation
+ defconfig: wayne: Enable some sound drivers
+ techpack : ellipticlabs : adapt driver to kernel 4.19
+ partially revert UPSTREAM: PM / wakeup: Drop wakeup_source_init(), wakeup_source_prepare()
+ defconfig: wayne: Enable ELLIPTICLABS ultrasound dsp driver
+ defconfig: wayne: Enable TFA9879 AMP
+ sdm660-common:Enable ZRAM writeback
+ techpack: qdsp6v2: Allow 320K AAC encoding
+ sound: soc: pcm: support host-less 24bit formats
+ sdm660:Use 24-bit audio
+ config: improved zRAM & enable zCACHE swap
+ ARM: dts: xiaomi: Optimise notification LED fluency
+ do accept() in LIFO order for cache efficiency
+ devfreq_boost: Run boost kthreads on big CPU cluster
+ drm/atomic: Boost DDR when committing a new frame
+ fs: exec: Introduce is_zygote_pid()
+ kernel: Boost whenever a zygote-forked process becomes a top app
+ kernel: Boost to the max for a short amount of time when zygote forks
+ cpufreq: qcom-hw: Allow overriding CPU frequency tables in DT
+ cpufreq: Kill userspace CPU boosting entirely
+ memlat: don't read perf event if other CPU is under scm call
+ ipv4/tcp: allow the memory tuning for tcp to go a little bigger than default
+ mm: vmstat: Use more power efficient workingqueues
+ platform: ipa: Use power efficient workingqueues
+ power: supply: Use power efficient workingqueues
+ mm: Perform PID map reads on the little CPU cluster
+ sched: features: Disable EAS_PREFER_IDLE
+ qpnp-smb2: Silence dmesg spam while charging
+ qpnp-smb2: fake as display off to fasten charging rates
+ dts: drivers: increase charging speed
+ treewide-minimal: Fix warning variable
+ Revert "cpufreq: schedutil: Expose default configuration options and apply init protection"
+ qcacld-3.0: remove logspam
+ drivers: staging: qcacld-3.0: Remove android.mk
+ iio: adc: Add backlight_therm ADC channel
+ ARM64: dts: sdm660: Switch back to CAF energy cost model
+ drivers: power: properly import missing xiaomi changes
+ exfat: fix overflow issue in exfat_cluster_to_sector()
+ exfat: fix wrong hint_stat initialization in exfat_find_dir_entry()
+ exfat: fix wrong size update of stream entry by typo
+ exfat: fix name_hash computation on big endian systems
+ exfat: remove EXFAT_SB_DIRTY flag
+ exfat: write multiple sectors at once
+ exfat: add error check when updating dir-entries
+ exfat: optimize exfat_zeroed_cluster()
+ exfat: retain 'VolumeFlags' properly
+ exfat: fix pointer error checking
+ exfat: fix use of uninitialized spinlock on error path
+ exfat: fix misspellings using codespell tool
+ exfat: use i_blocksize() to get blocksize
+ exfat: eliminate dead code in exfat_find()
+ exfat: remove useless directory scan in exfat_add_entry()
+ exfat: replace memcpy with structure assignment
+ exfat: remove 'rwoffset' in exfat_inode_info
+ exfat: remove useless check in exfat_move_file()
+ dm-crypt: increase threads
+ Makefile: Use pipes rather than temporary files for intermediate steps
+ drivers:i2c: Reduce touch latency by 0.5-1ms by just making it use block transfer mode for small transactions
+ msm: mdss: Boost CPU when a new frame is ready to be committed
+ defconfig: wayne: Disable PSI
+ qpnp-fg-gen3: 1000mA minimum charging 70% to 90%
+ ARM64: dts: xiaomi: set max brightness to 255
+ defconfig: wayne: Enable TTL Target
+ block: Do not collect I/O statistics
+ cnss: Do not mandate TESTMODE for netlink driver
+ block: Allow noop to be disabled
+ mmc: disable SPI CRC
+ selinux: Avoid dynamic memory allocation for INITCONTEXTLEN buffers
+ lib: Don't make DEBUG_KMEMLEAK depend on DEBUG_KERNEL
+ lib: Disable debug_locks
+ bpf: avoid dynamic memory allocation for small value buffers
+ printk: use buffer from the stack space
+ binder: set binder_debug_mask=0 to suppress logging
+ fs: default to noatime
+ power: don't ever reboot to verity red
+ arm64: debug: disable self-hosted debug by default
+ arm64: Kconfig: Don't select FRAME_POINTERS
+ lib: Kconfig: Don't enable DEBUG_BUGVERBOSE by default
+ diag: disable DIAG_DEBUG
+ lib: Remove DEBUG_KERNEL dependency from SCHED_DEBUG and SCHEDSTATS
+ msm: kgsl: Avoid dynamically allocating small command buffers
+ irq: spurious: Disable IRQ debugging by default
+ defconfig: wayne: Enable OTG
+ Update dtc sripts
+ Makefile: Set KBUILD_OUTPUT to out by default
+ Makefile: Force ARCH to be arm64
+ kbuild: Silence noisy GCC warnings up to GCC 10
+ msm: kgsl: Increase worker thread priority
+ msm: kgsl: Remove sync fence names
+ kernel: Don't allow IRQ affinity masks to have more than one CPU
+ kernel: Only set one CPU in the default IRQ affinity mask
+ msm: kgsl: Don't try to wait for fences that have been signaled
+ mm: kmemleak: Don't die when memory allocation fails
+ scatterlist: Don't allocate sg lists using __get_free_page
+ f2fs: Force strict fsync mode
+ Revert "usb: gadget: f_mtp: Increase default TX buffer size"
+ Revert "usb: gadget: mtp: Increase RX transfer length to 1M"
+ Revert "mutex: Add a delay into the SPIN_ON_OWNER wait loop."
+ arm64: Allow IPI_WAKEUP to be used outside of the ACPI parking protocol
+ locking/mutex: Don't hog RCU read lock while optimistically spinning
+ locking/rwsem: Don't hog RCU read lock while optimistically spinning
+ irqchip/gic-v3: Remove pr_devel message containing smp_processor_id()
+ kbuild: Disable stack conservation for GCC
+ arm64: Disable -fwhole-program for vDSO
+ selinux: Remove audit dependency
+ workqueue: Schedule workers on CPU0 or 0-3 by default
+ kernfs: Avoid dynamic memory allocation for small write buffers
+ ALSA: control_compat: Don't dynamically allocate single-use structs
+ binder: Stub out debug prints by default
+ msm: msm_bus: Kill transaction logging functionality
+ trace: add CONFIG_DISABLE_TRACE_PRINTK option
+ mm/slub.c: branch optimization in free slowpath
+ lib/lz4: update LZ4 decompressor module
+ lz4: do not export static symbol
+ lib/lz4/lz4_decompress.c: document deliberate use of `&'
+ lz4: fix kernel decompression speed
+ lib/lz4: explicitly support in-place decompression
+ cpufreq: stats: replace the global lock with atomic
+ ANDROID: sched: EAS: take cstate into account when selecting idle core
+ ANDROID: sched: EAS: take cstate into account when selecting idle core
+ msm: kgsl: Use lock-less list for page pools
+ ashmem: Rewrite to improve clarity and performance
+ ashmem: Adapt building on msm-4.19
+ kallsyms: increase KSYM_NAME_LEN both in kernel and kallsyms.c
+ defconfig: wayne: Add more kernel configs
+ simple_lmk: Run reclaim kthread on big CPU cluster
+ simple_lmk: Don't block in simple_lmk_mm_freed() on mm_free_lock
+ simple_lmk: Use MIN_FREE_PAGES wherever pages_needed is used
+ simple_lmk: Skip victim reduction when all victims need to be killed
+ simple_lmk: Pass a custom swap function to sort()
+ simple_lmk: Cacheline-align the victims array and mm_free_lock on SMP
+ simple_lmk: Optimize victim finder to eliminate hard-coded adj ranges
+ sched: Add API to migrate the current process to a given cpumask
+ sched/fair: Don't remove important task migration logic from PELT
+ kernel: Extend the perf-critical API to little CPUs
+ kernel: Warn when an IRQ's affinity notifier gets overwritten
+ drm: Affine IRQ to the perf CPU cluster
+ defconfig:wayne:Add CONFIG_LOCALVERSION_AUTO
+ defconfig: Disable Privileged Access Never (PAN) emulation
+ techpack: audio: Import Xiaomi changes
+ ARM: dts: sdm660: tas2557: enable 24bit data
+ sdm660-common:Nuke CONFIG_QTI_QMI_COOLING_DEVICE
+ sched/fair: Don't remove important task migration logic from PELT
+ qos: Don't allow userspace to impose restrictions on CPU idle levels
+ qos: Don't disable interrupts while holding pm_qos_lock
+ cpuidle: Optimize pm_qos notifier callback and IPI semantics
+ cpuidle: Mark CPUs idle as late as possible to avoid unneeded IPIs
+ ARM64: dts: longcheer: Bump touchscreen I2C bus clock
+ ARM64: wayne: Enable CONFIG_CC_WERROR
+ vidc_3x: Use static table governor for bus voting
+ vidc_3x: Change to avoid unloading firmware
+ Revert "ARM64: dts: qcom: Move LPI nodes to q6core
Issues I am facing
1. When connected to TWS, Phone doesn’t ring for incoming call. No sound of ring in TWS or/and Phone. Right after disconnecting the TWS phones starts ringing. The problem comes only when TWS is connected. My TWS has no problem it is working well on my other phones.
2. How to set different ring tone for both SIM Connections.
battery drained straight from 90 to 4 with 30 mins of Call of Duty. tried kang thats doing well. I want to be on this ROM if it is fixed.
New Build is Up
=========================
JUL 18 , 2021
=========================
+ Kernel Upstreamed to V4.19.197
+ Based On New Rebased WCSF Kernel
+ Update to Clang 12.0.7
+ sdm660-common:Update Blobs from LA.UM.9.1-r1-06700-Smxxx0.0
+ sdm660-common:Update Wi-Fi blobs LA.UM.9.12.r1-10800-SMxx50.0
+ sdm660-common:Update ESE blobs from LA.UM.8.2.1.r1-05600-sdm660
+ sdm660-common: audio: Add incall music profile [2/2]
+ sdm660-common: Drop libgpustats
+ sdm660-common:Add Missing sepolicies
+ sdm660-common: Update IDisplayConfig to 2.0 version
+ sdm660-common: Address sepolicy denials
+ sdm660-common: sepolicy: thermal_engine_prop -> vendor_thermal_prop
+ sdm660-common: power-libperfmgr: Update powerhint
+ sdm660-common:Adapt cpu architecture as per our chip
+ jasmine_sprout:Add SND_DEVICE_IN_CAMCORDER_TMIC and SND_DEVICE_IN_CAMCORDER_DMIC configs from stock
+ jasmine_sprout : add hph-highquality-mode
+ techpack: audio: autoconf: Enable leagay avtimer for sdm660

[ROM][OFFICIAL][STABLE][13][mido] PixelExperience [AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Redmi Note 4/4X [mido]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13
What's working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from PixelExperience website
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog​
Android OS version: 13
Security patch level: May 2023
Build author/Device Maintainer: [email protected]
Device Source code: https://github.com/PixelExperience-Devices
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Contributors
Alone0316 and RasyidKautsar(Mentor and Helper),[email protected]
Created : 2022-03-29
Last Updated 2023-05-04
04/05/2023 Update
Changelog:
- RETROFIT Build
- Use updated Retrofit recovery and follow install Guide if you are installing this rom for the first time or coming from unofficial build
- Recommended Recovery: https://sourceforge.net/projects/nr...1.1-A12-RETROFIT-Unofficial-mido.zip/download
- Guide: https://raw.githubusercontent.com/NRanjan-17/Pixel-Experience-Releases/main/RETROFIT_GUIDE.md
- If you are on the previous Official Build and using the Recommended RETROFIT Recovery then you can update via OTA
- Changelog
- May security patch
- Updated translations
- Updated Google Apps
- Minor issues fixed
Download
30/04/2023 Update
Changelog:
- RETROFIT Build
- Use updated Retrofit recovery and follow install Guide if you are installing this rom for the first time or coming from unofficial build
- Recommended Recovery: https://sourceforge.net/projects/nranjan-17/files/RETROFIT OrangeFox/OrangeFox-R11.1-A12-RETROFIT-Unofficial-mido.zip/download
- Guide: https://raw.githubusercontent.com/NRanjan-17/Pixel-Experience-Releases/main/RETROFIT_GUIDE.md
- Changelog
- April 2023 Release
- Enabled Quick Tap
- Inherit 2048 dalvik config as fallback for GSIs
- props: Enable Seamless Transfer support
- enable GL comp backpressure
- Increase 5 GHz network signal tolerance
- Clean Flash Recommended
Download
03/04/2023 Update
Changelog:
- FBE (File based encryption) enabled by default
- Build Now ships with aosp recovery also
- Use updated TWRP and follow install Guide if you are installing this rom for the first time or coming from unofficial build
- Recommended TWRP: https://github.com/zeelog/device_mido_twrp/releases/tag/2.0
- Guide: https://raw.githubusercontent.com/NRanjan-17/Pixel-Experience-Releases/main/install_guide.md
- If you are on the previous Official Build and using the Recommended TWRP then you can update via OTA
- Changelog
- March 2023 /QPR 2 Release
- Build libstdc++.so from source
- Remove aptX(HD) encoder shared libs
- Disable Bluetooth APCF Extended features
- Kernel Update to v3.1
Download
21/02/2023 Update
Changelog:
- FBE (File based encryption) enabled by default
- Build Now ships with aosp recovery also
- Use updated TWRP and follow install Guide if you are installing this rom for the first time or coming from unofficial build
- Recommended TWRP: https://github.com/zeelog/device_mido_twrp/releases/tag/2.0
- Guide: https://raw.githubusercontent.com/NRanjan-17/Pixel-Experience-Releases/main/install_guide.md
- If you are on the previous Official Build and using the Recommended TWRP then you can update via OTA
- Changelog
- Feb 2023 Patch
- CTS Fixed
- Disable Ripple Effect Animation
- Enable Framework Boost
- Added f2fs support for cache and data
- Disable enhanced sco connection via sysprop
- Drop deprecated ro.qualcomm.cabl prop
- Switch to jemalloc for libc
- Add performance hint definition for excessive rendering
- Kernel Update
Download
15/01/2023 Update
Changelog:
- FBE (File based encryption) enabled by default
- Use updated TWRP and follow install Guide if you are installing this rom for the first time or coming from unofficial build
- Recommended TWRP: https://github.com/zeelog/device_mido_twrp/releases/tag/2.0
- Guide: https://raw.githubusercontent.com/NRanjan-17/Pixel-Experience-Releases/main/install_guide.md
- If you are on the previous Official Build and using the Recommended TWRP then you can update via OTA
- Changelog
- Upstream kernel to 4.9.337
- New dirac lottie
- Minor Fixes
Download
07/01/2023 Update
Changelog:
- Initial Official Build
- Clean flash Recommended
- FBE (File based encryption) enabled by default *
- * use updated TWRP: https://github.com/zeelog/device_mido_twrp/releases/tag/2.0
- Follow this Guide: https://raw.githubusercontent.com/NRanjan-17/Pixel-Experience-Releases/main/install_guide.md
- Move audio configs under new location
- Disable SF client composition cache
- Disable HWC composition strategy prediction
- Disable continuous transaction tracing on all build types
- Update multiple vibration strength levels overlay for 13
- Disable Skia tracing by default
- Disable Async MTE on System Server
- Drop rild libargs property
- Allow init write to discard_max_bytes
- QCamera2: Update jpeg exif flash mode data properly
- QCamera2: mm-jpeg-interface: exif: supply full AE data in exif
- remove DEVICE_PROVISIONED
- Ditch rild.libpath prop
- Ditch persist.rild.nitz_* props
- audio: fix VTS
- Remove references to a2dp module
- wifi: Enable set channel on NDP setup
- wifi: Configure correct overlay configuration.
- wifi: smarter decisions on whether to use a 2- or 5Ghz AP
- enable wpa3 security feature for hotspot
- Enable WPA2 to WPA3 auto-upgrade
- Disable proprietary APE parser
- Disable proprietary MKV parser
- Update supported qcom parsers
- init: bump zram max_comp_streams to 8
- Restore pre a13 battery warning threshold
- Set block_binder_thread_on_incoming_calls in product.prop
- Do not block binder thread on incoming calls
- Speed profile services and wifi-service to reduce RAM and storage
- sepolicy: Change label for various graphics libs
- Improve pinner configuration
- Move qti_whitelist.xml to /system_ext
- manifest: Adding bluetooth a2dp & audio manifest entries
- sepolicy: Address qti_init_shell denial
- store TaskSnapshot in 16 bit pixel format to save memory
- AOSP WFD doesn't support protected Wi-Fi Display buffers
- Revert "mido: Disable ALMK and PPR on all targets"
- Revert "mido: rootdir: Use default allocstall threshold on k4.9"
- Revert "mido: Tune zram & swappinness"
- Revert "init: Limit cpufreq rate via down-/up_rate_limit_us knobs."
- Revert "mido: init: Apply aggressive write caching."
- Revert vibration intensity toggle
- parts: Fix compilation for QPR1 merge
- upstream kernel to 4.9.336
Download
18/11/2022 Update
Changelog:
Initial Normal and Plus Stable Release
Android 13
November 2022 Security Patch
Added Back Key Customization
Switched to new Aperture Camera
LiveDisplay (color profile, display mode, reading mode, color calibration)
Updated translations
Added Ripple Effect (Plus)
Added Face Unlock
Updated translations
StatusBar shortcuts (Plus)
Rotation settings (Plus)
Lock screen display (music visualizer, power menu) (Plus)
Per-app volume settings (Plus)
Increasing ring volume (Plus)
Adaptive Playback (Plus)
Different gestures (Plus)
Power and Volume button customisations (Plus)
Network traffic monitor (Plus)
Brightness (brightness slider, auto brightness, brightness control) (Plus)
Quick Pulldown (Plus)
Security Settings (Plus)
More QS tiles (Plus)
Scramble Pin Option (Plus)
Note:
Clean flash Recommend
Decrypted Build
Use Regular Flash method
Recommend Recovery: Official TWRP
Download
18/10/2022 Update
Changelog:
*October 2022 Security Patch
*Synced with source as of October 18th, 2022
*Enable Button Backlight
*Added Button Settings
*IPA: Use legacy IPA implementation by identifying as UM 3.18 platform
*mido: Update aptX from coral
*mido: Update DRM Widevine from Coral
*mido: Update camera to v52
*mido: Update Audio HIDL to 7.1
*Updated Vendor to September 2022
*Updated kernel to 4.9.330~hyper-v2.0
Download
18/09/2022 Update
Changelog:
* Initial PixelExperience BETA Android 13 Build
* September 2022 Security Patch
* Selinux Enforcing
* Basic stuff working
Download (13)
15/09/2022 Update
Changelog:
* September 2022 Security Patch
* mido: Update camera to v48
* mido: Disable zram writeback
* mido: init: Extend config_avoidGfxAccel for 3GB variants
* mido: parts: Add vibration intensity control
* mido: [SQUASH] Update Audio HAL from LA.UM.10.6.2.r1-02300-89xx.0
* mido: Drop unused 32bit blobs
* mido: audio feature: Disable incall_music support
* init: Limit cpufreq rate via down-/up_rate_limit_us knobs.
* perf:increase touch boost duration
* mido: Enable freeform windows
* mido: Update fqnames for Data factory HAL.
* mido: Drop default DRM service
* mido: parts: Update translations
* mido: Upstream kernel to 4.9.326~hyper
Download
19/08/2022 Update
Changelog:
* August 2022 Security Patch
* mido: Disable ALAC support
* mido: rootdir: Use default allocstall threshold on k4.9
* mido : Correct console config property
* mido: configs: Import gpfspath_oem_config.xml
* mido: add IQccvndhal from LA.UM.9.6.3.r1-06200-89xx.0
* mido: parts: dirac: Update vector icons to MD2 versions
* mido: add IQccvndhal from LA.UM.9.6.3.r1-06200-89xx.0
* mido: Tune zram & swappinness
* mido: update camera to v45
* mido: Enable SIP based VoIP feature
* mido: Update GPS config for S
* mido: Update GPS from LA.UM.9.6.3.r1-06200-89xx.0
* mido: dirac: add dirac logo
* mido: parts: Translation updates
* Upstream Kernel to 4.9.324~hyper
Download
Note -> If fingerprint not working after updating through dirty flash just go into the settings and register your fingerprint again.(For Normal and Plus Both)
16/July/2022 Update
Changelog:
- July Patch
- OK Google fixed
- Forced disabled iorapd
- Remove activity_recognition libs
- Update GPS config for S
- Inherit several Android Go configurations
- fix deprecated power profile items
- Upstream kernel to 4.9.319~hyper
Download
12/June/2022 update
Changelog ->
- June Security Patch
- Increase BootCompletedReceiver priority (Helps to restore Xiaomi Parts as soon as device boots up)
- Optimise dex flags
- Ok Google should work now
- Removed Google Camera due to multiple issues
- Added GrapheneOS Camera
- Added Smooth Scrolling props
- Disable slow blur effect to avoid laggish blur effect
- Upstream kernel to 4.9.317~hyper
Download
24/May/2022 update
Changelog ( Plus Edition )-
Changelog for 17/May/2022 build ->
May Security Patch
Added Google Camera 8.2
Fixed QR camera
Update Kernel 4.9.313
Kernel: update Wireguard
Added new Dirac presets
Enabled 2GB Zram
Added Power off charging Green led light indicator
Revert to stock build fingerprint
Drop Camera2
Added Auto Brightness toggle Setting -> System -> Status Bar
Introduced more granular settings for hotspot
Reverted QS background on white theme to old style
Other minor issues that have been fixed
Fixed battery widget not working properly
Clean Flash recommend OR Face Bootloop
Changelog for 23/May/2022 build ->
Fixed Google Camera issue
Switched to custom Hyper kernel 4.9.315
App launching improvement
Merged latest source fixes
Can dirty-flash if on 17/May/2022 build otherwise cleanflash
Download
Changelog ( Normal Edition )-
May Security Patch
Added Google Camera 8.2
Fixed QR camera
Update Kernel 4.9.313
Kernel: update Wireguard
Added new Dirac presets
Enabled 2GB Zram
Added Power off charging Green led light indicator
Revert to stock build fingerprint
Drop Camera2
Fixed battery widget not working properly
Clean Flash recommend or face bootloop
Download
24/April/2022 update
Changelog ( Plus Edition )-
Update Perf stack from LA.UM.9.6.2.r1-04200-89xx.0
Dirac: override AudioFX
Use threaded GLES render engine
Update ImsRadio HAL to v1.7
Update Kernel 4.9.310
Kernel: update Wireguard
Updated audio to v7
Updated OpenGL ES and Vulkan dEQP
Updated DRM, Widevine and Bluetooth
Updated Bluetooth audio to 2.1
Download
Changelog ( Normal Edition )-
Update Perf stack from LA.UM.9.6.2.r1-04200-89xx.0
Dirac: override AudioFX
Use threaded GLES render engine
Update ImsRadio HAL to v1.7
Update Kernel 4.9.310
Kernel: update Wireguard
Updated audio to v7
Updated OpenGL ES and Vulkan dEQP
Updated DRM, Widevine and Bluetooth
Updated Bluetooth audio to 2.1
Added Live Display
Download
12/April/2022 update
Changelog ( Plus Edition )-
Initial Release of Pixel Experience Plus version
April Security Patch
Goodix Fingerprint fixed ( Thanks to Rasyid Al Kautsar )
LiveDisplay (color profile, display mode, reading mode, color calibration)
StatusBar shortcuts
Rotation settings
Lock screen display (media cover, music visualizer, power menu)
Per-app volume settings
Increasing ring volume
Different gestures
Power and Volume button customisations
Network traffic monitor
Brightness (brightness slider, auto brightness, brightness control)
Quick settings (quick pulldown, title visibility, vibrate on touch)
Improved Dirac
Torch settings
Clear Speakers
Audio amplification
Ambient Display moved to system -> Gestures
New Volume Panel
Mobile Data and WI-FI tile
Clean Flash recommend
Download
Changelog ( Normal Edition )-
Hotfix Build
Goodix Fingerprint fixed ( Thanks to Rasyid Al Kautsar )
Improved Dirac
Torch settings
Clear Speakers
Audio amplification
Ambient Display moved to system -> Gestures
Download
Note - #Clean flash is recommended. But if you are dirty flashing then re-register your fingerprint.
#If USB is not detecting in your PC ,then reboot your device and wait it will start working. (This only happens when you have flashed or
updated the rom fresh and trying to connect it to PC)
10/April/2022 update
Changelog-
Hotfix build
April Security patch
Fixed USB file transfer ( Thanks to Rasyid Al Kautsar )
Merged Latest tags
Improved App animation
Fixed charging animation not appearing
Fixed unlock sound playing repeatedly
Updated translations
Others fixes
Download
09/April/2022 update
Changelog-
- Fixed Bluetooth Calling ( Thanks to Alone0316 )
- Added support for Pixel Live Wallpapers
- Added support for Quick Tap
- New Google phone dial pad layout support ( If not added update your app to the latest BETA )
- Fixed lag issue
Download
30/March/2022 update
Changelog-
- Fixed Chrome crash and Hang issue.
- Update to Fusion Kernel 4.9
- Removed Pixel Live Wallpaper
- Add High sensitivity mode
- Merged latest tags
Download
31/March/2022 update
Changelog-
- Updated zlos kernel 4.9
- Improved app loading speed
- Fixed lag
- Added Google Call Recording
Download
The fingerprint does not work.
CuteGrass said:
The fingerprint does not work.
Click to expand...
Click to collapse
Fingerprint is not working for Goodix users
[email protected] said:
Fingerprint is not working for Goodix users
Click to expand...
Click to collapse
Is it possible to fix this problem?
CuteGrass said:
Is it possible to fix this problem?
Click to expand...
Click to collapse
yes
well done bro! everything's work flawlessly on my mido
Can you add advanced reboot option?
djfnz said:
Can you add advanced reboot option?
Click to expand...
Click to collapse
It will be in PE Plus. Stay Tuned.
Release PixelExperience_Plus_mido-12.1-20220411-1302-UNOFFICIAL · NRanjan-17/Pixel-Experience-Releases
Initial Release of Pixel Experience Plus version April Security Patch Goodix Fingerprint fixed ( Thanks to Rasyid Al Kautsar ) LiveDisplay (color profile, display mode, reading mode, color calibrat...
github.com
Everything is fine! Thank you!
12/April/2022 update
Changelog ( Plus Edition )-
Initial Release of Pixel Experience Plus version
April Security Patch
Goodix Fingerprint fixed ( Thanks to Rasyid Al Kautsar )
LiveDisplay (color profile, display mode, reading mode, color calibration)
StatusBar shortcuts
Rotation settings
Lock screen display (media cover, music visualizer, power menu)
Per-app volume settings
Increasing ring volume
Different gestures
Power and Volume button customisations
Network traffic monitor
Brightness (brightness slider, auto brightness, brightness control)
Quick settings (quick pulldown, title visibility, vibrate on touch)
Improved Dirac
Torch settings
Clear Speakers
Audio amplification
Ambient Display moved to system -> Gestures
New Volume Panel
Mobile Data and WI-FI tile
Clean Flash recommend
Download
Changelog ( Normal Edition )-
Hotfix Build
Goodix Fingerprint fixed ( Thanks to Rasyid Al Kautsar )
Improved Dirac
Torch settings
Clear Speakers
Audio amplification
Ambient Display moved to system -> Gestures
Download
Note - #Clean flash is recommended. But if you are dirty flashing then re-register your fingerprint.
#If USB is not detecting in your PC ,then reboot your device and wait it will start working. (This only happens when you have flashed or
updated the rom fresh and trying to connect it to PC)
[email protected] said:
12/April/2022 update
Changelog ( Plus Edition )-
Initial Release of Pixel Experience Plus version
April Security Patch
Goodix Fingerprint fixed ( Thanks to Rasyid Al Kautsar )
LiveDisplay (color profile, display mode, reading mode, color calibration)
StatusBar shortcuts
Rotation settings
Lock screen display (media cover, music visualizer, power menu)
Per-app volume settings
Increasing ring volume
Different gestures
Power and Volume button customisations
Network traffic monitor
Brightness (brightness slider, auto brightness, brightness control)
Quick settings (quick pulldown, title visibility, vibrate on touch)
Improved Dirac
Torch settings
Clear Speakers
Audio amplification
Ambient Display moved to system -> Gestures
New Volume Panel
Mobile Data and WI-FI tile
Clean Flash recommend
Download
Changelog ( Normal Edition )-
Hotfix Build
Goodix Fingerprint fixed ( Thanks to Rasyid Al Kautsar )
Improved Dirac
Torch settings
Clear Speakers
Audio amplification
Ambient Display moved to system -> Gestures
Download
Note - #Clean flash is recommended. But if you are dirty flashing then re-register your fingerprint.
#If USB is not detecting in your PC ,then reboot your device and wait it will start working. (This only happens when you have flashed or
updated the rom fresh and trying to connect it to PC)
Click to expand...
Click to collapse
Great!Thanks.
Hey guys, can you tell me what kind of performance I can expect from this? I installed PixelExperience from their official website on my RN4X two weeks ago and it has been a terrible experience so far, apps take up to 10 seconds to load and everything crashes all the time. Will this be better?
GucioGucioCo said:
Hey guys, can you tell me what kind of performance I can expect from this? I installed PixelExperience from their official website on my RN4X two weeks ago and it has been a terrible experience so far, apps take up to 10 seconds to load and everything crashes all the time. Will this be better?
Click to expand...
Click to collapse
The firmware is smooth, does not freeze.
I have a need to try this ROM, but - which custom recovery to use? This is A 12 L, and I have maybe outdated OFox, but on PEx11 there is recommended TWRP. So, do I need to flash the latest TWRP for Mido, or can use Ofox as I did for A12?
what,s different normal version with plus version?
i have problem with this rom, alarm doesnt work!,
arihiroyuki said:
i have problem with this rom, alarm doesnt work!,
Click to expand...
Click to collapse
it works
tested
Fogdeveloper.blogspot.com said:
I have a need to try this ROM, but - which custom recovery to use? This is A 12 L, and I have maybe outdated OFox, but on PEx11 there is recommended TWRP. So, do I need to flash the latest TWRP for Mido, or can use Ofox as I did for A12?
Click to expand...
Click to collapse
PE 12L recovery is given inside rom zip
[email protected] said:
12/April/2022 update
Changelog ( Plus Edition )-
Initial Release of Pixel Experience Plus version
April Security Patch
Goodix Fingerprint fixed ( Thanks to Rasyid Al Kautsar )
LiveDisplay (color profile, display mode, reading mode, color calibration)
StatusBar shortcuts
Rotation settings
Lock screen display (media cover, music visualizer, power menu)
Per-app volume settings
Increasing ring volume
Different gestures
Power and Volume button customisations
Network traffic monitor
Brightness (brightness slider, auto brightness, brightness control)
Quick settings (quick pulldown, title visibility, vibrate on touch)
Improved Dirac
Torch settings
Clear Speakers
Audio amplification
Ambient Display moved to system -> Gestures
New Volume Panel
Mobile Data and WI-FI tile
Clean Flash recommend
Download
Changelog ( Normal Edition )-
Hotfix Build
Goodix Fingerprint fixed ( Thanks to Rasyid Al Kautsar )
Improved Dirac
Torch settings
Clear Speakers
Audio amplification
Ambient Display moved to system -> Gestures
Download
Note - #Clean flash is recommended. But if you are dirty flashing then re-register your fingerprint.
#If USB is not detecting in your PC ,then reboot your device and wait it will start working. (This only happens when you have flashed or
updated the rom fresh and trying to connect it to PC)
Click to expand...
Click to collapse
I am using the plus edition. I haven't encountered any problems so far. Thanks.

Categories

Resources