Database Info

How to change oom priority on an APK

My question is basic. I got an app and i need this alive. But its oom priority 12 P). I tried to change oom priority from oom changer but it turned deck after 5 minutes. How can i change oom priority from classes.dex?

[R] Custom kernel for 6.0/.1

Could someone make a custom kernel which has the features i will list below?
Double tap to wake, (do not include swipe to wake)
Headphone/speaker gain
Xz compressed/ tweaked ramdisk (gzip)
Removed any logs/loggers
Undervolt options
Disabled mpdecision
Tunable vibration strength
Back light dimmer/ able to dim it below factory settings
Fast charge
Init.d support
Over clock to between max and min potential
Lionheart/bioshock schedulers
random (aosp/cm/anything) boot logo
Selinux needs to be permissive
Brighter tourch power
Any audio mods/tweaks
Battery enhancements if anyone can think of what ones would be suitable
Any other tweaks you might think of
Thanks

Super Battery Saving Modes for SetCPU

Super Saving Battery Modes for
SetCPU​
Disclaimer: Tinkering with CPU/s is dangerous, do it at your own risk​
Requirements:
• SetCPU installed
• Root access
First launch SetCPU and tap Recommended Settings in the introduction, grant root access
Introduction
Here what we will do is we will create profiles in SetCPU to set the frequency to lower frequencies.
I recommend that you use a custom firmware like LOS or whatever OS that is bloat free, but the stock rom is ok naman. The reason for this is stock roms tend to lag much more than the custom ones.
Profile creation - Night Mode
Ok, first create profile, then add a trigger + select time range.
Pick the time range that you are mostly sleeping ex. 11:00 to 8:00 in my case
Set the values:
• CPU Speed - 500Max and 400Min(Lowest one you have
• Uncheck the cpu governor only ifyou don't have the powersave governor, if you have enable it and set it to powersave
• Ignore I/O scheduler
• Check Show Notification and Persistent and choose Battery
Hit next then just name it ULTRA Stamina Mode - Enabled, for better identification, set the priority to 100 and uncheck the Exclusive profileYou will know later why then hit next.
Profile Creation - Standby Mode
Again set the trigger in Any of These True, inside of it choose time range:
Mostly you have a time that you are awake but not literally active doing some in your Android ex. For me that is 8:00 to 12:55 and 20:00 to 22:55
*Don't worry u can create another condition inside the of the condition Any of These True if you want to set two time range
Set the values:
• CPU - 800Max and 400Min
• Ignore the governor and I/O scheduler
• Tick the notification and persistent and choose Normal
Name the profile: Standby Mode - Active, priority to 99 and not exclusive.
Profile Creation - Charging
Now this profile is the reason why i did not make any profile exclusive because this profile can be active anytime and it will override the current active profile.
Set the Trigger to Charging State and change it to Charging AC then hit next.
Set the values:
• CPU - 700Max
• Ignore the governore and I/O scheduler
• Enable Notification and Persistent, choose charging. Hit next
Name it Charging and ofcourse do not set it to Exclusive, priority to 98. Tap next
Profile Creation - Boost Mode
Now this mode is the time that it changes the CPU frequency to high but not maximum to save battery.
Again create a profile then for the trigger select Time Range:
Select the time range that you are mostly doing operations on your Android, typically its After Launch until mid -midnight. (Ex. For me its 13:00 to 19:55. Hit next
Important: Do not overlap the time ranges between the profiles you've created, you will have some problems, try alotting 5 minutes between them.
Set the values:
• CPU - 1200Max and 400Min
• Ignore the governor and I/O scheduler
• Enable notification, tick the persistent and choose warning. Hit next
Name it Boost Mode - Active
Priority to 97 and not exclusive. Tap next
And you are done, post a quick reply if you have questions but please do not quote OP.
I will attach a series of screen shots in the next post for reference.
Be sure to hit thanks button if this profiles work for you

Here is the zip, it's attached. They are not scrambled
Verify the contents if not sure: MD5
4ec4f28cc43b1426812d4c69a9b341d3

(Share)(Tweaks) tweaks for msm extended rom

I am not the developer I am just Sharing the zip
Tweak pack for MSM Xtended ROM:-
flashable zip include
- xenial kernel
- busybox 1.28.4
- gps Tweaks
- magisk 16.6
- simple gapps
- enable doze gapps
- port google framework
- port bravia engine display
- port trimulos engine display
- port asus launcher
- port mizo keyboard
- port es file exploler
- init.d injector
- alfin tweaks v1.3 Beta
- adsblock
simple set profile
- battery (default)
- balance
- performance
set displays
- amoled display
- super amoled display
- yellow display
tweaks feature
- enable google doze
- force deep sleep
- ram cache booster
- fstrim /data
- fstrim /cache
- fstrim /system
- sqlitedb /data
- sqlitedb /cache
- sqlitedb /system
- set cpu governor
- set cpu frequensi
- set gpu governor
- set gpu frequensi
- set io scheduler
- set io speed
- enable msm thermal
- enable cpu hotplug
- enable cpu power efficient
- enable andreno idler
- entropy generatos
- disable fsync
- reduce phone vibrator
- disable enable usb fast charge
- disable yellow flash
- big cache allocation
- big cache reclaiming
- disable kernel panic
- disable wake up
- disable swap
- disable zram
- battery saving mod
- Fix Bad voice quality in calls
- Better call voice quality
- Disable blackscreen after call
- Disable notification while adb is active
- Better scrolling
- Improve touchscreen
- more ram
- Increase picture JPEG
- Increase video recording & picture
- Increase flash camera
- Increase media quality
- Volume steps increase
- Telephon & ringtone tweaks
- Disable google & network location
- enabled support bravia engine
- enabled bravia engine
- enabled support for ipv4 & ipv6
- better signal
- fast streaming video
- disable kernel error checking
- disable strict mode checking
- sensor sleep control
- power saving
- reduce dirty ratio
- disable kill allocating task
- better image quality
- wify sleeper
- disable sending usage data
- disable logcat
- disable debug log
- disable tuner
- enabled button light timeout
- enabled youtube display 4K
- gpu render booster
- lock ram home screen
- qualcom assertive display
- persist.sys.force_highendgfx
- selinux permissive
- fps unlocked
- fast booting
- fast reboot
- no boot animation
- big deep buffers network
- Increase game speed
How to flash it?
Wipe dalvik cache and cache,
Wipe data and system,
And flash the newest version of MSM Xtended v9,
Flash gapps,
Flash this pack,.
And Reboot
Here is a link:
https://drive.google.com/file/d/1d4v099BJz5qAjyF-1HMRWVKbkprvGJtL/view?usp=sharing
Credits-? problem in credit I don't know who is the developer

mk24268 said:
I am not the developer I am just Sharing the zip
Tweak pack for MSM Xtended ROM:-
flashable zip include
- xenial kernel
- busybox 1.28.4
- gps Tweaks
- magisk 16.6
- simple gapps
- enable doze gapps
- port google framework
- port bravia engine display
- port trimulos engine display
- port asus launcher
- port mizo keyboard
- port es file exploler
- init.d injector
- alfin tweaks v1.3 Beta
- adsblock
simple set profile
- battery (default)
- balance
- performance
set displays
- amoled display
- super amoled display
- yellow display
tweaks feature
- enable google doze
- force deep sleep
- ram cache booster
- fstrim /data
- fstrim /cache
- fstrim /system
- sqlitedb /data
- sqlitedb /cache
- sqlitedb /system
- set cpu governor
- set cpu frequensi
- set gpu governor
- set gpu frequensi
- set io scheduler
- set io speed
- enable msm thermal
- enable cpu hotplug
- enable cpu power efficient
- enable andreno idler
- entropy generatos
- disable fsync
- reduce phone vibrator
- disable enable usb fast charge
- disable yellow flash
- big cache allocation
- big cache reclaiming
- disable kernel panic
- disable wake up
- disable swap
- disable zram
- battery saving mod
- Fix Bad voice quality in calls
- Better call voice quality
- Disable blackscreen after call
- Disable notification while adb is active
- Better scrolling
- Improve touchscreen
- more ram
- Increase picture JPEG
- Increase video recording & picture
- Increase flash camera
- Increase media quality
- Volume steps increase
- Telephon & ringtone tweaks
- Disable google & network location
- enabled support bravia engine
- enabled bravia engine
- enabled support for ipv4 & ipv6
- better signal
- fast streaming video
- disable kernel error checking
- disable strict mode checking
- sensor sleep control
- power saving
- reduce dirty ratio
- disable kill allocating task
- better image quality
- wify sleeper
- disable sending usage data
- disable logcat
- disable debug log
- disable tuner
- enabled button light timeout
- enabled youtube display 4K
- gpu render booster
- lock ram home screen
- qualcom assertive display
- persist.sys.force_highendgfx
- selinux permissive
- fps unlocked
- fast booting
- fast reboot
- no boot animation
- big deep buffers network
- Increase game speed
How to flash it?
Wipe dalvik cache and cache,
Wipe data and system,
And flash the newest version of MSM Xtended v9,
Flash gapps,
Flash this pack,.
And Reboot
Here is a link:
https://drive.google.com/file/d/1d4v099BJz5qAjyF-1HMRWVKbkprvGJtL/view?usp=sharing
Credits-[emoji53] problem in credit I don't know who is the developer
Click to expand...
Click to collapse
Just for xtented ? Can i use this tweak for others rom?
Sent from my Redmi Note 4 using Tapatalk

I installed that zip...bootloops all The time
Enviado de meu Redmi Note 4 usando o Tapatalk

Where is the original thread?

minta akses
ijin akses

.12.

Themes / Apps / Mods [App]Galaxy Max Hz (Refresh Rate Mods, Screen-off Mods and More)

About this app:
Refresh Rate Control: Easily control the max refresh rate (Hz) of android devices with multiple refresh rates even on power saving mode (e.g. note20 ultra, s20/S20+/S20Ultra, z fold 2, s21/s21+/s21Ultra, tab S7/S7+, A52, A72). This app can limit max refresh rate to 96hz (or any available refresh rate) on supported smartphones - you can save power with negligible difference on smoothness. Use either the in-app toggle or quick settings tile - ADB setup or Root NOT needed.
Switch to High: Option to use High(Fixed) motion smoothness mode on Samsung devices with native Adaptive motion smoothness***
Current Samsung smartphones natively supporting adaptive refresh rates:
Galaxy Note 20 Ultra
Galaxy Z Fold 2
Galaxy S21, S21+, S21 Ultra
Refresh Rate Monitor: Observe how multiple refresh rates work on your device. Use either the in-app toggle or quick settings tile
Quick Resolution Switcher: Easily switch to any supported resolutions using the included quick setting tile***
Quick High/Adaptive on Power Saving Mode: Easily switch to high or adaptive motion smoothness mode (from Standard) even on power saving mode on supported Samsung smartphones.***
Force to Lowest Hz: Force lowest refresh rate on screen-off/AOD. This overrides Samsung's strange stock behavior which sets the refresh rate to the highest on screen off (update: it is now at 60hz since oneui3.0) - to improve standby power consumption a bit - ADB setup or Root NOT needed.
Auto set power saving mode during screen-off***
Ad-Free Exclusive Features:
Keep motion smoothness when power saving mode is enabled - either manually or by the system/adaptive power saving***
Adaptive refresh rate mod: Experimental adaptive refresh rate mod for devices supporting multiple refresh rates but do not have the native Adaptive motion smoothness (e.g. S20 series, S20FE, TabS7/S7+, A52 and A72)***
Quick-doze mod: Quick doze mode during screen-off to improve standby power consumption***
Set minimum refresh rate for adaptive mode to 60hz or lower (if available)***
Resolution switcher filter: Filter what screen resolutions to include for the resolution switcher QS tile.
Statusbar net speed indicator
7-day Ad-Free Trial is available. Just click "Activate Ad-free" button and activate free trial when prompted.
***these marked features require one-time ADB setup (this is not root)
Download link , FAQs and more info in original xda thread

v7.10.21 in-app update now available
- Bug fixesv7.10 changes- Separate Max hz setting for power saving mode- Automate GMH settings using Tasker plugin support. Supported actions/variables: Max Refresh Rate, Keep Motion Smoothness on PSM, Motion Smoothness Mode, Quick-doze Mod, Change Screen Resolution. Check FAQs for the basic setup guide.- Some code refactoring and optimizationsNote: Clear app's data if experiencing any issues

v7.12 in-app update now available
- More customizable maintenance window interval for Quick-Doze Mode
v7.11
- Added turn-off autosync option under screen-off mods

v7.13.00 in-app update now up.
tribalfs said:
v7.13
Anti-flicker: added minimum brightness threshold for Adaptive mod similar to the native one. When the device's display brightness falls below the set minimum brightness threshold, adaptive mod will pause and will resume once the brightness increases again above the threshold. This is for devices who are experiencing flickers when refresh rate switches at certain low brightness level.Stability and bug fixes
Click to expand...
Click to collapse

v7.14.10 in-app update now available
-48hz on force lowest on screen off/AOD now works on S20/+/Ultra on any refresh rate mode-improvements on brightness threshold for adaptive mod performance(anti-flicker)-added quick settings tille to toggle min hz for adaptive mod on supported devices-added tasker option to toggle min hz for adaptive mod on supported devices-other fixes
v7.14
Added Auto SENSORS OFF (experimental non-root workaround): Device sensors will automatically turn off while screen is off until the device is unlocked. With tasker support so you can enable and disable this setting on the conditions you set.

v7.14.20 in-app update:
-Google Chrome's swipe to switch tab gesture is now working even with the accessibility service enabled.-Improved Turkish translations-some minor improvements
v7.14.19
Fixed: Retain previously selected mode(high or adaptive) when switching back from standard mode
Refresh rate overlay now visible on settings/notification panel and lockscreen - stock-like but customizable
Improved Swedish translations
v7.14.18
Fixed bugs on OneUi4.0: brightness threshold for adaptive mod bug, netspeed indicator bug
Fixed bug on minimum hz tile and minimum hz tile tasker command
Minor layout and tile improvements
Auto dim refresh rate overlay when not changing after few seconds
Fixed crashes on netspeed indicator
v7.14.17
Workaround for auto sensors off for OneUI4.0. Prior method was already blocked in A12.
Experimental workaround: enabling High/Adaptive on PSM on OneUI4.0 (not working on some models)
Fixed: setting min hertz for adaptive (%lhz) using Tasker not working