Hi, I have a FRD-L09C432. I wanted to try Oreo with the russian firmware, so I followed this guide:
https://forum.xda-developers.com/honor-8/how-to/rebranding-to-frd-l09c10-oreo-russian-t3815591
Something must have went wrong because it booted without setup nor GApps. I think the two data zips didn't flash correctly. They couldn't be dloaded because they don't have an update.app file.
I managed to install TWRP with MultiTool v8, and I tried to flash Gapps but the google account setup crashes. I tried to flash the two other zips, "update_data_full_public" flashed successfully (only a small error at the begining but I don't think it was important) and "update_full_FRD-L09_hw_ru" gave an error directly.
I rebooted to system and OEM unlock was disabled and greyed out ... I tried to factory reset in TWRP and now it won't boot, it's stuck on honor boot animation for minutes then reboot ...
I tried to reflash update.zip via TWRP but it gives an error. Also TWRP can't unmount system, I don't know if it's important.
I tried to use DC Unlocker (15€ credits) to unlock FRP but it didn't do anything ... I asked for a refund to try DC Phoenix.
I thought about flashing stock recovery via TWRP to factory reset properly but with FRP locked I'm worried to lose TWRP forever.
Now I don't know what to do. Is DC Phoenix a good solution? Which ROM must I flash? How do I rollback to Nougat? Is there any solution?
Thanks. I'm pretty lost actually :crying:
Ok I solved my problem by flashing C10B360 from TWRP and factory reset from stock recovery. If it can help someone!
The bootloader is relocked but the rom works
BriceFW said:
Ok I solved my problem by flashing C10B360 from TWRP and factory reset from stock recovery. If it can help someone!
The bootloader is relocked but the rom works
Click to expand...
Click to collapse
The only problem is that I lost twrp in the process and now my bootloader is locked and oem unlock is greyd out :crying:
Juhkimo said:
The only problem is that I lost twrp in the process and now my bootloader is locked and oem unlock is greyd out :crying:
Click to expand...
Click to collapse
Maybe you can try to dload the B360 ROM if you are on the stock recovery
BriceFW said:
Maybe you can try to dload the B360 ROM if you are on the stock recovery
Click to expand...
Click to collapse
I will try that but don't you need a rollback package for that?
Juhkimo said:
I will try that but don't you need a rollback package for that?
Click to expand...
Click to collapse
I didn't need one, just had to factory reset from stock recovery after flashing it
BriceFW said:
I didn't need one, just had to factory reset from stock recovery after flashing it
Click to expand...
Click to collapse
Ok that did not work. It fails at 5%
Juhkimo said:
Ok that did not work. It fails at 5%
Click to expand...
Click to collapse
:/ Maybe try the rollback package then B130 ... I've no idea
If you have no other solution look for DC Phoenix and how to use it properly (don't reproduce my error, it costs money ?), I don't know how to help more :/ good luck!
BriceFW said:
:/ Maybe try the rollback package then B130 ... I've no idea
If you have no other solution look for DC Phoenix and how to use it properly (don't reproduce my error, it costs money ), I don't know how to help more :/ good luck!
Click to expand...
Click to collapse
Thanks for help and quick answers :highfive:
I will try to figure out something.
sorry
BriceFW said:
Hi, I have a FRD-L09C432. I wanted to try Oreo with the russian firmware, so I followed this guide:
https://forum.xda-developers.com/honor-8/how-to/rebranding-to-frd-l09c10-oreo-russian-t3815591
Something must have went wrong because it booted without setup nor GApps. I think the two data zips didn't flash correctly. They couldn't be dloaded because they don't have an update.app file.
I managed to install TWRP with MultiTool v8, and I tried to flash Gapps but the google account setup crashes. I tried to flash the two other zips, "update_data_full_public" flashed successfully (only a small error at the begining but I don't think it was important) and "update_full_FRD-L09_hw_ru" gave an error directly.
I rebooted to system and OEM unlock was disabled and greyed out ... I tried to factory reset in TWRP and now it won't boot, it's stuck on honor boot animation for minutes then reboot ...
I tried to reflash update.zip via TWRP but it gives an error. Also TWRP can't unmount system, I don't know if it's important.
I tried to use DC Unlocker (15€ credits) to unlock FRP but it didn't do anything ... I asked for a refund to try DC Phoenix.
I thought about flashing stock recovery via TWRP to factory reset properly but with FRP locked I'm worried to lose TWRP forever.
Now I don't know what to do. Is DC Phoenix a good solution? Which ROM must I flash? How do I rollback to Nougat? Is there any solution?
Thanks. I'm pretty lost actually :crying:
Click to expand...
Click to collapse
i'm the author of the post and can tell you that you probally forget the oeminfo file... i did the same thing coming back to frd-l04 and now i don't know how to fix it... what did you do?
Related
Hi,
I need your help: I might have bricked my Mate 9 while trying to root it. Right now it makes a boot loop. I still have access to TWRP:
I already WIPED the phone with TWRP (all apart from the Systempartition) but I'm still out of luck.
I downloaded the current firmware (FULL) and extracted the update.app, copied it into a "dload" folder on my SDCARD but I get a "Software install failed" after 5% from the HUAWEI updater tool (which opens when pressing VolumeDown while booting). I tried it with bootloader unlocked and relocked.
I really hope you guys have another idea!
Thanks a lot!
Cheers,
quicky
Extract update.app with huawei extractor, and flash system, recovery, boot.img with fastboot.
gm007 said:
Extract update.app with huawei extractor, and flash system, recovery, boot.img with fastboot.
Click to expand...
Click to collapse
Thanks for the feedback. I HEARD that the new filesystem of the Mate9 renders the phone with that process. As you can see I'm a noob, I just wanted to ask if anybody was succesful with HuaweiExtractor on the Mate9
Also fastboot flashing method not working
Phone bootloap
So that means it's bricked? I just made a donation for "Funky Huawei" hoping that this solution will let me flash it back to normal. But I start running out of ideas.
Any other options?
Just to let you all know: I tried FunkyHuawei and I was able to recover my Mate9! Everything is working fine again.
quicky said:
Just to let you all know: I tried FunkyHuawei and I was able to recover my Mate9! Everything is working fine again.
Click to expand...
Click to collapse
Good to hear! Enjoy
quicky said:
Just to let you all know: I tried FunkyHuawei and I was able to recover my Mate9! Everything is working fine again.
Click to expand...
Click to collapse
how to recover it .. my case same as you
my mate 9 brick
thanks before
Update : im using Funkyhuawei methode, Problem solved.
Need help to relock bootloader stock mate 9 usa
Anyone has the stock rom for the mate 9 USA version I want to relock bootloader. Thanks
Moenasser34 said:
Anyone has the stock rom for the mate 9 USA version I want to relock bootloader. Thanks
Click to expand...
Click to collapse
Just reunlock from ADB
I really need help, i was trying to go back to stock and i have no idea what happened, was flashing just fine and then it said crust gave me a error so i thought to just wipe cache and start over well when i did that, it went to a white screen now all i can do is get into fastboot mode, tried almost everything, have the stock firmware and roll back files but i cant do the 3 button method just boots to a blue screen over and over agin then back to the white screen. can someone please help me
dussycole92 said:
I really need help, i was trying to go back to stock and i have no idea what happened, was flashing just fine and then it said crust gave me a error so i thought to just wipe cache and start over well when i did that, it went to a white screen now all i can do is get into fastboot mode, tried almost everything, have the stock firmware and roll back files but i cant do the 3 button method just boots to a blue screen over and over agin then back to the white screen. can someone please help me
Click to expand...
Click to collapse
You can't get into recovery or erecovery? Only fastboot? Does it say you still have the bootloader unlocked?
Gus194 said:
You can't get into recovery or erecovery? Only fastboot? Does it say you still have the bootloader unlocked?
Click to expand...
Click to collapse
yeah it says phone unlocked and FRP unlocked but wont let me flash twrp img, boots on the computer but not on the phone?
dussycole92 said:
yeah it says phone unlocked and FRP unlocked but wont let me flash twrp img, boots on the computer but not on the phone?
Click to expand...
Click to collapse
What error does it say when you try to flash TWRP?
Gus194 said:
What error does it say when you try to flash TWRP?
Click to expand...
Click to collapse
says '"error mode" please update system again then it says error! func no : 16 (lmp3 image) error no : 1 (security verify faild!) then it will keep looping and the Huawei update extrator wont load the update.app, im just a mess right now cause this is my work phone and im freaking out right now
Have you tried flashing the system files and the rest of the files by fastboot yet?
Gus194 said:
Have you tried flashing the system files and the rest of the files by fastboot yet?
Click to expand...
Click to collapse
how do i do that? all i have are the stock firmware and the rollback files with the dl files? but its for 6.0
dussycole92 said:
how do i do that? all i have are the stock firmware and the rollback files with the dl files? but its for 6.0
Click to expand...
Click to collapse
Extract the update.app files with the Huawei Update Extractor program. Google it
And then try to flash the system.img via fastboot in the bootloader
Gus194 said:
Extract the update.app files with the Huawei Update Extractor program. Google it
And then try to flash the system.img via fastboot in the bootloader
Click to expand...
Click to collapse
Huawei update extrator wont read the update.app, it shows up but when i click it to open it gives an error?!
dussycole92 said:
Huawei update extrator wont read the update.app, it shows up but when i click it to open it gives an error?!
Click to expand...
Click to collapse
It's most likely a corrupted update.app thats probably the problem. Redownload it
Gus194 said:
It's most likely a corrupted update.app thats probably the problem. Redownload it
Click to expand...
Click to collapse
okay i got it! what are the steps exactly? btw thanks so much for the help!!!
dussycole92 said:
okay i got it! what are the steps exactly? btw thanks so much for the help!!!
Click to expand...
Click to collapse
Just download the stock firmware again for your phone model
Gus194 said:
Just download the stock firmware again for your phone model
Click to expand...
Click to collapse
i have the stock 6.0 firmware and the rollback file, whats the command prompt id run and what files would i flash, sorry for all the questions, never had this problem on any phone?
dussycole92 said:
i have the stock 6.0 firmware and the rollback file, whats the command prompt id run and what files would i flash, sorry for all the questions, never had this problem on any phone?
Click to expand...
Click to collapse
You can't get into recovery right? Or the update menu by pressing volume up + down and power at the same time?
Gus194 said:
You can't get into recovery right? Or the update menu by pressing volume up + down and power at the same time?
Click to expand...
Click to collapse
yeah i cant get in to either, and the system img fails when i try to flash it in fastboot mode, and twrp wont boo teven if it successfully flashes on my end, and when i do the 3 button combo it just flashes a blu screen over and over again, i feel like im screwed
dussycole92 said:
yeah i cant get in to either, and the system img fails when i try to flash it in fastboot mode, and twrp wont boo teven if it successfully flashes on my end, and when i do the 3 button combo it just flashes a blu screen over and over again, i feel like im screwed
Click to expand...
Click to collapse
Nah there's still hope. I screwed up worse. I had the same problem that I couldn't get into recovery. But I had the FRP Lock and Bootloader Locked also. But what I had to do was pay 15 Euros for a program called DC Phoenix and it fixed all my problem. Not all is lost
Gus194 said:
Nah there's still hope. I screwed up worse. I had the same problem that I couldn't get into recovery. But I had the FRP Lock and Bootloader Locked also. But what I had to do was pay 15 Euros for a program called DC Phoenix and it fixed all my problem. Not all is lost
Click to expand...
Click to collapse
really dont wanna drop money lol, but i have everything installed, just need to know what to do next, the system img isnt flashing
dussycole92 said:
really dont wanna drop money lol, but i have everything installed, just need to know what to do next, the system img isnt flashing
Click to expand...
Click to collapse
Well you can try to use the SRK toolkit if u want
I need help too, I have a 64 gig US version. Just rooted it today and got TWRP, made a back up. Flashed 2 roms, and none would go past the boot screen so I tried to do my back up and it error'd out at the last minute. I would like to just revert everything back to stock and lock the bootloader. IS this possible? if I do the EMUI update it fails, prob cause the boot loader is locked.
Gus194 said:
Well you can try to use the SRK toolkit if u want
Click to expand...
Click to collapse
i just need to know how the step by step why to get the stock recovery and system on the phone?
I am unable to enroll fingerprint or setup any passcode or pin on my lockscreen i can't even access the security tab in the settings.
I was using stock. I flashed the RR without removing OLD enrolled fingerprints. Then due to camera issues I have reverted to stock.
I used Firmware Finder to get the firmware file. I tried to flash it through dload method but it didn't worked so I extracted the UPDATE.APP and flashed stock boot,system,vendor,recovery and factory restored the phone but that didn't helped .. Anyone can please help me.
Or can someone tell me where the enrolled fingers data is stored because i have formated the system,vendor,data paratitions through twrp and after that did the fastboot flash method. No luck no success... Anyone with solutions .. ?
{SOLVED}
Flash stock recovery amd do factory reset from stock recovery
shashank1320 said:
Flash stock recovery amd do factory reset from stock recovery
Click to expand...
Click to collapse
Didn't worked
Rommco05 said:
You already try flash boot.img and stock recovery.img? After that u will be able make factory reset
Click to expand...
Click to collapse
factory reset from stock recovery didn't made any changes
Rommco05 said:
Try again flash custom rom but without set pin or fingerprint lock
Click to expand...
Click to collapse
I can't set any pin or lock. I have a phone without security settings.
Rommco05 said:
Try again flash custom rom but without set pin or fingerprint lock
Click to expand...
Click to collapse
He dont have the pin or FP working
Rommco05 said:
True mi mistake
Click to expand...
Click to collapse
Thank You Guys For the Support I made it Just flashed the Update.APP downloaded from stechguide.com and flashed it through dload method worked like a charm
shashank1320 said:
He dont have the pin or FP working
Click to expand...
Click to collapse
Thank You Guys got everything working just changed the update.app
musamaashraf said:
Thank You Guys got everything working just changed the update.app
Click to expand...
Click to collapse
Glad mate. Enjoy
I've flashed 3.4.0-15][surya] recovery then flashed lineageos and havoc but the wifi wasn t working so I tried to flash the original rom but it just boots into recovery
Please help guys?
Bozdo said:
I've flashed 3.4.0-15][surya] recovery then flashed lineageos and havoc but the wifi wasn t working so I tried to flash the original rom but it just boots into recovery
Please help guys?
Click to expand...
Click to collapse
Most probable you did not Format data after you flashed the stock ROM. Download the fastboot of the stock ROM you wanna use, unzip it and flash it with MiFlash tool.
Alin45 said:
Most probable you did not Format data after you flashed the stock ROM. Download the fastboot of the stock ROM you wanna use, unzip it and flash it with MiFlash tool.
Click to expand...
Click to collapse
I did wipe system folder, cache and dalvik folders
Bozdo said:
I did wipe system folder, cache and dalvik folders
Click to expand...
Click to collapse
Nope...format data is needed (this one when you have to type ”yes”)
Even though I get this message error the phone booted the rom, weird...
So can I try flashing other roms like lineageos using this tool or do I need twrp? Could the wifi error on the other roms be from not properly formatting the folders?
View attachment 5128525
Bozdo said:
Even though I get this message error the phone booted the rom, weird...
So can I try flashing other roms like lineageos using this tool or do I need twrp? Could the wifi error on the other roms be from not properly formatting the folders?
View attachment 5128525
Click to expand...
Click to collapse
Yeah, you got that error because you did not lock your bootloader, but ROM will work just fine. You can use MiFlash for stock ROMs only.
The Wi-Fi problems are usually related by flashing the custom ROM from the wrong stock firmware and vendor version. Just read the first page (OP) of the ROM you wanna flash and see what version of the stock ROM is needed (most of them ask for 12.0.3.0 version, but some ask for 12.0.2.0 or 12.0.4.0).
Alin45 said:
Yeah, you got that error because you did not lock your bootloader, but ROM will work just fine
Click to expand...
Click to collapse
Say I lock the bootloader, but what if I want to unlock after? will I have to wait 7 days again?
Bozdo said:
Say I lock the bootloader, but what if I want to unlock after? will I have to wait 7 days again?
Click to expand...
Click to collapse
If you already unlock. Then flash with fastboot, phone will lock again. And you can instant unlock again because your Mi Account have permission to unlock your device.
Hi. Recently I've been trying to flash Xiaomi.eu. however, it didn't have success. My bootloader is unlocked, and I flashed the Chinese TWRP to flash it. However, upon flashing it I always had an error about my cache being corrupted or an odm error. However, I did manage to boot into xiaomi.eu before, but it randomly stopped working. Tried to flash stock as well, but everytime I do, it stops at the cache again and always gives me an error.
I'm fully defeated at this point and I haven't been able to boot into anything since. I've tried everything and that's why I'm here.
I hope anyone can help me.
Thank you.
PompoenJeroen said:
Hi. Recently I've been trying to flash Xiaomi.eu. however, it didn't have success. My bootloader is unlocked, and I flashed the Chinese TWRP to flash it. However, upon flashing it I always had an error about my cache being corrupted or an odm error. However, I did manage to boot into xiaomi.eu before, but it randomly stopped working. Tried to flash stock as well, but everytime I do, it stops at the cache again and always gives me an error.
I'm fully defeated at this point and I haven't been able to boot into anything since. I've tried everything and that's why I'm here.
I hope anyone can help me.
Thank you.
Click to expand...
Click to collapse
how did you try to flash stock rom?
try with another usb cable.
NOSS8 said:
how did you try to flash stock rom?
try with another usb cable.
Click to expand...
Click to collapse
I tried to flash stock ROM via MiFlash. Most likely the latest build. I will try with another USB cable now.
Screenshot with error
I've instead tried to unbrick it with XiaomiToolV2. However, I'm still getting the same error, just in a different way. Does anyone know how to fix this? I've had this multiple times without success.
https://imgur.com/lSGJydI
PompoenJeroen said:
I tried to flash stock ROM via MiFlash. Most likely the latest build. I will try with another USB cable now.
Click to expand...
Click to collapse
Use miflash,put the file on C:,rename the file (ex:12.04EU),Flash the rom that was on the phone when you got it,select clean all with miflash.
MIFLASH https://xiaomiflashtool.com/
NOSS8 said:
Use miflash,put the file on C:,rename the file (ex:12.04EU),Flash the rom that was on the phone when you got it,select clean all with miflash.
MIFLASH https://xiaomiflashtool.com/
Click to expand...
Click to collapse
i have the same problem and ive tried the things youve said and it finishes in about a second i think ive done something wrong right?
What rom did you have?
Which rom do you want to install?
NOSS8 said:
What rom did you have?
Which rom do you want to install?
Click to expand...
Click to collapse
both european i think i bougt if of a dutch site idk if that helps
install TWRP(chinesse)format data only->reboot system done if not download ZIP recovery(https://xiaomifirmwareupdater.com/archive/miui/lmi/ )and flash it with TWRP.
NOSS8 said:
install TWRP(chinesse)format data only->reboot system done if not download ZIP recovery(https://xiaomifirmwareupdater.com/archive/miui/lmi/ )and flash it with TWRP.
Click to expand...
Click to collapse
where do i find chinese twrp?
i always get
failed to mount '/odm' (No such device)
Mikxx said:
where do i find chinese twrp?
Click to expand...
Click to collapse
here"https://drive.google.com/drive/folders/10_nqA89FmAXNseHmLOcTeDSzfkPMn5hQ"
NOSS8 said:
here"https://drive.google.com/drive/folders/10_nqA89FmAXNseHmLOcTeDSzfkPMn5hQ"
Click to expand...
Click to collapse
you are a hero my phone works again
NOSS8 said:
here"https://drive.google.com/drive/folders/10_nqA89FmAXNseHmLOcTeDSzfkPMn5hQ"
Click to expand...
Click to collapse
please give me this recovery again!
dingila said:
please give me this recovery again!
Click to expand...
Click to collapse
https://androidfilehost.com/?w=files&flid=318240