Disable logd [Speed improvement] - LG V20 Guides, News, & Discussion

So last night I had to reinstall one of my H918s. I usually just debloat / customize my own ROM, but I have started using Alpha ROM by @i95swervin. Even then, I have a zip that I flash that makes some tweaks that I like, and that saves me time.
Well I was in a hurry, and didn't have quick access to my zip, so I used the phone with a "stock" Alpha ROM.
Wow .. talk about sluggish. I can see why some people have complained.
This morning I decided to try and figure out why, and noticed that logd was enabled. When you root and debloat, you get a massive amount of errors that are logged. If you run adb logcat you will see the massive stream that starts scrolling down your screen.
Unfortunately, disabling logd causes SafetyNet to fail.
For me the performance is worth it. If you don't care about it, you can disable logd by:
* Boot to TWRP
* Mount system
* Use file manager to navigate to /system/bin
* Rename logd to logd.bak
There is a "proper" way to disable it by changing init scripts, but this is by far the easiest.
If you need to pass SafetyNet, or if you need logging again, just rename it back.
-- Brian

Good tip. You may also have noticed my follow up post in the "Is it still worth buying this phone in 2018" thread. In my case, I discovered that a good part of the sluggishness I had reported was being caused by Magisk in i95swervin's ROM. Once I got rid of it, the ROM immediately started to perform so much better. Between disabling logd, removing Magisk and turning Window, Transition and Animator scales to "off", the phone finally feels premium again.

I don't experience any of this on pure stock ROM.
Sent from my LG-H918 using XDA Labs

@BROKEN1981 If you are talking about a stock non-rooted ROM, the logging isn't an issue. Even a stock ROM that is rooted and not debloated doesn't have the issue if you disable rctd. This becomes an issue when you start debloating a lot of crap.
-- Brian

runningnak3d said:
@BROKEN1981 If you are talking about a stock non-rooted ROM, the logging isn't an issue. Even a stock ROM that is rooted and not debloated doesn't have the issue if you disable rctd. This becomes an issue when you start debloating a lot of crap.
-- Brian
Click to expand...
Click to collapse
Ahh ok. Only things I deleted out of system was Lookout and a few Google apps. That's probably why I never noticed anything. Also have RCTD disabled.
Right now I'm looking into deleting a few LG apps like LG bridge, switch, account and backup.
Thanks for the heads up on the logd file. I might end up having to rename like you suggested.
Sent from my LG-H918 using XDA Labs

The quick and dirty way to tell if you might be getting performance issues is to run adb logcat while the phone is booted into the OS.
If you are getting a few log entries every couple of seconds, or even a couple of log entries every second, then no, it isn't really going to help.
However, if you are getting pages of log entries every second (as in scrolling by so fast you can't read it), then yea, it is killing your NAND performance -- not to mention killing your NAND since they only have so many read / write cycles.
-- Brian

Anyway to do this without causing issues with SafetyNet? I have a couple of apps I like to use and google pay.

I am researching that now. It looks like older versions of Magisk will work without logd, but I don't have time to test right now.
-- Brian

runningnak3d said:
I am researching that now. It looks like older versions of Magisk will work without logd, but I don't have time to test right now.
-- Brian
Click to expand...
Click to collapse
Ok Thank you. Please keep us up to date.

Will it increase Also battery life?

IF it is writing a lot of logs, yes. Just disabling it if you aren't getting a stream of logs isn't going to do anything.
-- Brian

I totally understand. I hope you didn't think I was given ya sh*t
You may want to consider adding it as an option explaining that (for now) SafetyNet will be broken if they disable it.
-- Brian

runningnak3d said:
IF it is writing a lot of logs, yes. Just disabling it if you aren't getting a stream of logs isn't going to do anything.
-- Brian
Click to expand...
Click to collapse
i was thinking while reading the thread, if you move the file from /system/bin/ to sdcard/documents.,, that wouldn't trip safety net would it? your technically not your touching(modding) your system .. sorta speak.

Was there any progress with magisk and getting safety net working with this disabled?

bountyman334 said:
i was thinking while reading the thread, if you move the file from /system/bin/ to sdcard/documents.,, that wouldn't trip safety net would it? your technically not your touching(modding) your system .. sorta speak.
Click to expand...
Click to collapse
I was able to seemingly get it to pass SafetyNet by replacing the logd binary with an empty file via a Magisk module. The issue is if you enable MagiskHide with logd disabled it kills performance. Because of this Magisk auto disables MagiskHide on startup if it detects logd is missing.
So it's actually possible that SafetyNet would pass even if you just delete the file normally and re enable MagiskHide, I haven't tested that, but again not recommended because of the performance issue.
This thread is relevant: https://forum.xda-developers.com/apps/magisk/disable-logd-t3726561

Im Running RR6.1 on my H918ARB1 and it is so smooth comparaed to stock roms that going back feels like installing a beta. There is something definitely wrong with LG. I just leaved RR on it. I have a Gcam that works and the battery is surprisingly very good. There is still no wifi calling or Volte but those are compromises im willing to live with for the sake of better performace and battery life. And best of all is That I have not experienced any throttle when hot. when lineage goes official and RR follows it is better to be AOSP.

carlosjcar said:
Im Running RR6.1 on my H918ARB1 and it is so smooth comparaed to stock roms that going back feels like installing a beta. There is something definitely wrong with LG. I just leaved RR on it. I have a Gcam that works and the battery is surprisingly very good. There is still no wifi calling or Volte but those are compromises im willing to live with for the sake of better performace and battery life. And best of all is That I have not experienced any throttle when hot. when lineage goes official and RR follows it is better to be AOSP.
Click to expand...
Click to collapse
OK fan boy wave that flag, keep preaching that half baked, missing features os
Sent from my LG-H910 using XDA Labs

cnjax said:
OK fan boy wave that flag, keep preaching that half baked, missing features os
Sent from my LG-H910 using XDA Labs
Click to expand...
Click to collapse
That is exactly the point, Some missing features yes, but we are talking 8.1 vs. 7.0 WITHOUT Support from lg. No thermal throttling and smoothness and speed. Heck yes I'm a fan of that.
And I surely hope you are not talking about my PR flag, because if you are a racist you should have no part in this community.

carlosjcar said:
That is exactly the point, Some missing features yes, but we are talking 8.1 vs. 7.0 WITHOUT Support from lg. No thermal throttling and smoothness and speed. Heck yes I'm a fan of that.
And I surely hope you are not talking about my PR flag, because if you are a racist you should have no part in this community.
Click to expand...
Click to collapse
There wasn't any reference to race in my post, my phone is super fast and smooth on stock as well and all the v20 features work flawlessly where as on Los stuff doesn't work and you have to jump through hoops, dl additional apps to get basic functionality. But I digress this isn't a los thread, and your post was off topic to begin with.
Sent from my LG-H910 using XDA Labs

carlosjcar said:
That is exactly the point, Some missing features yes, but we are talking 8.1 vs. 7.0 WITHOUT Support from lg. No thermal throttling and smoothness and speed. Heck yes I'm a fan of that.
And I surely hope you are not talking about my PR flag, because if you are a racist you should have no part in this community.
Click to expand...
Click to collapse
Can you even list the differences between 7.0 and 8.0? To my knowledge there is really nothing different.
Sent from my LG-H918 using XDA Labs
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
carlosjcar said:
That is exactly the point, Some missing features yes, but we are talking 8.1 vs. 7.0 WITHOUT Support from lg. No thermal throttling and smoothness and speed. Heck yes I'm a fan of that.
And I surely hope you are not talking about my PR flag, because if you are a racist you should have no part in this community.
Click to expand...
Click to collapse
Also he was talking about you preaching about RR. That's the reference to waving the flag.
Get a clue brah.
Sent from my LG-H918 using XDA Labs
---------- Post added at 05:08 PM ---------- Previous post was at 05:07 PM ----------
cnjax said:
OK fan boy wave that flag, keep preaching that half baked, missing features os
Click to expand...
Click to collapse
Agreed!!!!!!!
I replaced the thermal paste and have no throttling whatsoever. No lagging and it feels butter smooth.
Sent from my LG-H918 using XDA Labs

Related

[Kernel][TeamViper]Spartacus_EB13_1.3GHz Build From Source[17 Mar 2011]

------------------------------------------------------------------------------**DISCLAIMER**------------------------------------------------------------------------------​
Ok, So I decided to get this kernel out and played with a little more. Had quite a few people test it with success, so I'm gonna release it, but of course, I have to release it with the standard disclaimer.
I nor any of the contributors to this Kernel will be held responsible for anything you decide to do on your own. By downloading and flashing this kernel, you are knowingly accepting the fact that it may not work for you. If you should have any issues though, we are more than happy to help you to try to get it working.
The Battery Tweaks Have Been Removed Until They Are Updated... I Have Permission To Use Them, And I WILL Change Them, But I Will Also Make Sure I Don't Forget Credit This Time. My Apologies For The Last One.
---------------------------------------------------------------------------------**CREDITS**---------------------------------------------------------------------------------​
Rodderik - For helping me out from the start. We've been working on kernels since day one of the source drop, but I also had ROM stuff to do and he just kept his kernel wheels turning. The mans a Genius.
Supercurio - For paving the way with voodoo sound.
Mkasick - For the video and keyboard patches.
Paiyne - For putting all my tester kernels through the gauntlet and letting me know what needed to be fixed right away so I could make sure it was a stable release.
All my other testers - I wouldn't be where I am without you guys. So thank you all
-------------------------------------------------------------------------------**CHANGELOG**-------------------------------------------------------------------------------​
..::Spartacus v1.0::..
*Added A2SD*
*Added A Few CPU Scripts For Verification, And For Setting Frequencies*
*Overclockable To 1.3Ghz*
*Added A 1.3GHz, 1.2Ghz, And 600MHz Step*
*Added Camera/Video Fix By Mkasick*
*Added Keyboard Patch Fix By Mkasick*
*Undervolted A Little, But Not Much Because Of The Battery Tweaking Scripts*
*Added Voodoo Sound By Supercurio*
*Added Rodderiks Malware Patch*
*Raised The FPS Cap*
*Added All Scripts Needed For A2SD*
*Added My Custom Backup And Restore Scripts*
*Built From Source*
*Removed Battery Tweak Scripts Until I Update Them*
Yes.... I will make sure credit goes to everyone else that worked on them too...
NOTE: My custom backup and restore scripts are a work in progress. I know for sure that the backup works (I've had many testers confirm this), but I've changed the restore script, so hopefully it works for you. To give you a few features of what the script does, here's a brief rundown.
Backup
1. Backs up /data/app.
2. Backs up /data/app-private.
3. Backs up /data/data
4. Creates a compressed .tar file of backed up /data/data to conserve space.
5. Creates a folder on your sdcard for easy access labeled "backuppro".
Restore
1. Restores /data/app from sdcard to phone.
2. Restores /data/app-private from sdcard to phone.
3. Uncompresses .tar file and restores data to phone.
4. Once restored, the apps show back up in your "downloads" section of the Market again so you can still update when an update is available.
5. What to restore is optional. Whether it be both apps and data, or one or the other. You have the option to choose what you want with simple "y" or "n" responses.
When running the backup.sh script, you may see "No such file" or "No such directory", don't worry this is normal, it is still performing the requested actions. Also, before you backup or restore, the script will tell you exactly how much space is being used in the folder on your sdcard. This number does not show up until after the first time you run it obviously, but after the first time, it will show you exactly how much space you are using for apps & data.
---------------------------------------------------------------------------------**SCRIPTS**---------------------------------------------------------------------------------
Here Is A List Of The Scripts Included In The Kernel Flash And Their Description Of What They Do
(All commands are typed here exactly as they should be typed into Terminal Emulator following "su")​
1. 1200perf.sh - This script can be run to quickly change the CPU Frequency to 1.2GHz Max and 200MHz Min Frequencies while on the Conservative Governor.
2. 1300perf.sh - This script can be run to quickly change the CPU Frequency to 1.3GHz Max and 200MHz Min Frequencies while on the Conservative Governor.
3. backup.sh - This script was created custom by Team Viper to backup your /data/app & /data/app-private folders to your sdcard, as well as your /data/data folder.
4. restore.sh - This script was created custom by Team Viper to restore your /data/app & /data/app-private folders and your /data/data files back to your phone from the sdcard.
5. cpufreq.sh - This script sets your governor to 'Conservative' and your frequency changing thresholds to 50/10.
6. getfreq.sh - This script can be run to tell you your current CPU Frequency.
7. getgov.sh - This script can be run to tell you your current CPU Governor.
8. verifycache.sh - Force /system dalvik-cache on /data instead of /cache if it is not large enough.
9. maxperf.sh - This script sets your CPU to 'Conservative' while setting your Max frequency to 1300MHz, and your Min frequency to 200MHz.
10. minfree.sh - This script sets your phones internal memory killer to slightly more aggressive settings.
11. tweaks - This script allows you to change certain features of the phone. With it, you can change your Hardware Accelleration, Stagefright Media Player, JIT, and Dalvik Heap Sizes status to either Enabled or Disabled. It prompts you to make a backup first, or you can not use the script.
12. Malware Patch - Rodderick wrote up this script to prevent anyone from accessing your phone or causing virus like issues. Thanks Rodderik, we love your tight butt.
------------------------------------------------------------------------------**DOWNLOADS**------------------------------------------------------------------------------
Spartacus Kernel Download & Mirror
Spartacus_v1.0_EB13_1.3GHz​
This Kernel Was Built Entirely From Source, But Has The Battery Tweaks Removed Until They Are Updated. I Will Post Another Version Tomorrow When I Get More Time With The A2SD Scripts In It.
------------------------------------------------------------------------------**APPLICATIONS**------------------------------------------------------------------------------
Here are a few applications that you can use with the kernel. Some applications are needed, such as Terminal Emulator, some applications are optional, such as Voodoo Control App, and some applications are just for fun, such as Linpack. Regardless of your choice, enjoy
Voodoo Control App
Terminal Emulator
Linpack
Quadrant
Smartbench 2010
Smartbench 2011
Neocore FPS Test
SimplyLock Lockscreen Replacement
Just wanted to make sure everyone was aware, even though they are posted in my thread, I am NOT taking credit for them. Just a heads up.
NOTE: All the applications that I have listed here are FREE in the market. I simply placed them here for convenience. If you like the apps, feel free to go to the market and purchase the donation versions if available.
You can also download SetCPU from the Developers page on XDA found here or you can get it from the Android Market. If you like the app, show your support for the Dev and purchase it, it's cheap, it wont break you .
------------------------------------------------------------------------------**RESOURCES**------------------------------------------------------------------------------​
Team Viper
Team Viper's Official Site: Click Here
Team Viper's Official Wiki: Click Here
Team Viper's Official Tickets: Click Here​
I'd like to now thank all of you for your support! All the work I do is 100% free and I will never charge for anything I do. Should you ever feel the need to donate, you are more than welcome to and you can donate by clicking this link.
Click Here to buy me a soda, beer, or Flux Capacitor for my DeLorean... Yes, that's right, you are NOT the only time traveling Ninja, set on a quest for truth and justice. The only difference between me and you... I was trained by Chuck Norris.
Downloading now.
You should of waited to see if you get the OP back,you should be ok since you said you made a mistake...
Sent from my SPH-D700 using XDA Premium App
ecooce said:
You should of waited to see if you get the OP back,you should be ok since you said you made a mistake...
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I was going to, but i hate defending myself for honest mistakes... I removed any trace of anything people could yell about. I built this personally from source myself, and people can see that i did it. That way there's no questions. And for all the people that said stuff in the other thread... If you don't like my work... don't download it... seriously... developing for the Samsung Epic turned from being fun for me to living in a daytime soap opera... This may be the last thing i do.
Nothing against you ecooce... i've got no beef with you... I agree 100% with the statement you made, what he did was uncalled for... but credit DID need to be given... I just wish i would have been properly presented with the opportunity to fix my mistake before anything happened. I would have gladly done so.
I'm sorry, i don't mean to rant, i just feel like i need to present my case to everyone. If you've been a loyal follower of Viper or not, i never intended to do wrong. I understand that when ViperROM first started, yeah, we have had a few things that didn't work, but our ROM is just like anyone else's out there today... I've personally never heard of anyone needing to replace their phone after running one of my ROM's... I'm not even making the current release, and TPhillips busted his ass on it, but i'm sure someone will say something about it. ViperROM has advanced since we've started, and we're not backing down because some of the other dev's dont like us. We don't care. Again, i apologize for not giving credit to begin with, it was an honest mistake and i gladly fixed the mistake by stating i was sorry.
Here's the bottom line. I Credited other people in my thread, so it's obvious i don't have issues with crediting people. I apologize for my mistake. If you don't like me, or any other person of the team, you have the freedom to choose not to install this. To everyone else, Thank you.
Agreed,well said...
Sent from my SPH-D700 using XDA Premium App
BThomas22x said:
I was going to, but i hate defending myself for honest mistakes... I removed any trace of anything people could yell about. I built this personally from source myself, and people can see that i did it. That way there's no questions. And for all the people that said stuff in the other thread... If you don't like my work... don't download it... seriously... developing for the Samsung Epic turned from being fun for me to living in a daytime soap opera... This may be the last thing i do.
Nothing against you ecooce... i've got no beef with you... I agree 100% with the statement you made, what he did was uncalled for... but credit DID need to be given... I just wish i would have been properly presented with the opportunity to fix my mistake before anything happened. I would have gladly done so.
I'm sorry, i don't mean to rant, i just feel like i need to present my case to everyone. If you've been a loyal follower of Viper or not, i never intended to do wrong. I understand that when ViperROM first started, yeah, we have had a few things that didn't work, but our ROM is just like anyone else's out there today... I've personally never heard of anyone needing to replace their phone after running one of my ROM's... I'm not even making the current release, and TPhillips busted his ass on it, but i'm sure someone will say something about it. ViperROM has advanced since we've started, and we're not backing down because some of the other dev's dont like us. We don't care. Again, i apologize for not giving credit to begin with, it was an honest mistake and i gladly fixed the mistake by stating i was sorry.
Here's the bottom line. I Credited other people in my thread, so it's obvious i don't have issues with crediting people. I apologize for my mistake. If you don't like me, or any other person of the team, you have the freedom to choose not to install this. To everyone else, Thank you.
Click to expand...
Click to collapse
Good man.
As someone thats around you guys alot (the team), I've got to say people on here don't understand how much work gets put into these things. Even though he borrowed some Scripts, as you can see here, the kernel doesn't need the scripts at all to run, and is an amazing kernel WITHOUT the scripts, with just everything BT made HIMSELF.
The dudes helping our Epics while ACTIVELY serving our country EVERYDAY as well, and you don't see him complain or ask for anything in return. Imagine yourself being in the military all day and than dev'ing all night. I sure as hell know I'd be tired. But he still does it anyway cause he enjoys it.
But as you can tell, it seems that enjoyment is slowly being taken away from him, which is horrible. Hasn't anyones momma on here taught them the "If you don't have anything nice to say, don't say anything at all?".
Dudes a great guy yet I haven't seen much respect shown toward him on here and its kind of sickening. I mean no disrespect towards anyone on here, but anyone that's got something against BT or anyone on the ViperTeam, take it up with them privately from now on. You may also take notice that they ViperTeam doesn't go around implying they're better than anyone like some other groups you see around. If you don't like their stuff, they don't care. Just don't use it.
And a problem I saw in the other thread was people saying the kernel was breaking their root.
People, if your on Syndicate, Their root is in their KERNEL instead of their ROM. Therefore if you flash a kernel that doesn't have the root files, you will lose root on the ROM because the root was in the kernel. So stop thinking its the kernels fault when your on Syndicate and this kernel makes you lose root.
Don't know if it works but you can try flashing the kernel than one-click-rooting if you want. That may make it work. Other than that, don't keep saying "I'm running ACS's rom and this kernel makes me lose root! rage!!$%%percent%[email protected]!"
/rant.
Keep it up BT, trying er out now.
Soooo...this does have a2sd?
I know it says "added a2sd", I only ask since the a2sd instructions werent included
Btw, whats the swap partition for? I have a2sd setup from baked snack, but I don't remember it having me make a swap partition...what purpose does that serve? (Just out of curiosty)
And since I don't have a swap, I'm gonna have to remove the partitions first....is there an option to do this in cwm or will I have to adb it?
Sent from my baked and emotionless SPH-D700
thanks
thanks bro you now how i feel hahaha you the man regardless so lets just do the dang thing BT imma hit u up in the irc bro..tomorrow lol
Does this kernal still have the color problem?
Sent from my SPH-D700 using XDA App
Thanks!
10 char
**** happens people can be big ass's but don't trip everyone still loves you and the work you and the team do. Maybe next time they won't jump the gun and freak out about the little stufff in life.
Sent from my SPH-D700 using XDA Premium App
Just installed and love the speed of this.
But after I wake the phone up from from its first sleep after reboot, color goes weird. Color is all washed out.
Screen looks normal on first boot, its only after the first wake up does it go weird.
I will reinstall when this is fixed.
Can we get everything except the color changes without a2sd?
Sent from my Epic 4G using XDA Premium app
SemiGamer said:
Good man.
As someone thats around you guys alot (the team), I've got to say people on here don't understand how much work gets put into these things. Even though he borrowed some Scripts, as you can see here, the kernel doesn't need the scripts at all to run, and is an amazing kernel WITHOUT the scripts, with just everything BT made HIMSELF.
The dudes helping our Epics while ACTIVELY serving our country EVERYDAY as well, and you don't see him complain or ask for anything in return. Imagine yourself being in the military all day and than dev'ing all night. I sure as hell know I'd be tired. But he still does it anyway cause he enjoys it.
But as you can tell, it seems that enjoyment is slowly being taken away from him, which is horrible. Hasn't anyones momma on here taught them the "If you don't have anything nice to say, don't say anything at all?".
Dudes a great guy yet I haven't seen much respect shown toward him on here and its kind of sickening. I mean no disrespect towards anyone on here, but anyone that's got something against BT or anyone on the ViperTeam, take it up with them privately from now on. You may also take notice that they ViperTeam doesn't go around implying they're better than anyone like some other groups you see around. If you don't like their stuff, they don't care. Just don't use it.
And a problem I saw in the other thread was people saying the kernel was breaking their root.
People, if your on Syndicate, Their root is in their KERNEL instead of their ROM. Therefore if you flash a kernel that doesn't have the root files, you will lose root on the ROM because the root was in the kernel. So stop thinking its the kernels fault when your on Syndicate and this kernel makes you lose root.
Don't know if it works but you can try flashing the kernel than one-click-rooting if you want. That may make it work. Other than that, don't keep saying "I'm running ACS's rom and this kernel makes me lose root! rage!!$%%percent%[email protected]!"
/rant.
Keep it up BT, trying er out now.
Click to expand...
Click to collapse
I don't complain much on here, but one click root didn't work. I read the whole thing and it keeps saying not allowed throughout the process so hopefully I can figure it out how to deeply my phone. To the op, thanks for your efforts
Sent from my SPH-D700 using Tapatalk
squshy 7 said:
Soooo...this does have a2sd?
I know it says "added a2sd", I only ask since the a2sd instructions werent included
Btw, whats the swap partition for? I have a2sd setup from baked snack, but I don't remember it having me make a swap partition...what purpose does that serve? (Just out of curiosty)
And since I don't have a swap, I'm gonna have to remove the partitions first....is there an option to do this in cwm or will I have to adb it?
Sent from my baked and emotionless SPH-D700
Click to expand...
Click to collapse
Bump quoting because I want this answered (specifically about the swap)
Sent from my baked and emotionless SPH-D700
BT again THANKS!
Will try it out.
Been running Viper Roms forever but was trying others while waiting for the new release. i was on Midnight when I flashed the new Kernel and it seemed to work fine. I then put Trinity back on an did a few more things....well bottom line I cannot get the new kernel to work now with trinity. I've odin'd back to stock and worked my way up and as soon as I put the new kernel on it hangs at the Samscreen. I can flash the 03a and 4 kenels with no problem but Spartacus is out of the question. Any Idea what I may have F'd up?
BT...just trying this out and seems to be great, as usual from team viper. Just a quick question...does running one of the performance scripts eliminate the need for set cpu...or would I still need both? Thanks again! Happy st pat's day!
Sent from my SPH-D700 using XDA Premium App
lilmikeyv said:
BT...just trying this out and seems to be great, as usual from team viper. Just a quick question...does running one of the performance scripts eliminate the need for set cpu...or would I still need both? Thanks again! Happy st pat's day!
Edit: nm...the scripts didn't seem to work for me...I'll just adjust on set cpu then...superfast...thanks!
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA Premium App
It eliminates it.
lilmikeyv said:
BT...just trying this out and seems to be great, as usual from team viper. Just a quick question...does running one of the performance scripts eliminate the need for set cpu...or would I still need both? Thanks again! Happy st pat's day!
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Sent From My Evo Killer!

[ROM][MAN][ED12] n⁀b‿f⁀s ▶r☢m◀ [edify] v1.0

Read this whole post before downloading!!!!
Well, I removed stock apps, I inserted a lot of cm7 stuff, I added over-scroll and CRT, I fixed gallery drain, I removed all 4g related stuff (it doesn't work, so why the extra space ), I added some things to init.d (they wont work until we have support), I changed the build.prop to be nexus-ish (Netflix shows and works), I did a bunch of other random stuff.
I RECOMMEND AFTER YOU FLASH (IF YOU DON'T DO THE * ONES SOME THINGS WONT WORK):
*Download GPS status and clear a-GPS status
*Download CPU Master or SetCPU and change the governor to what you want (if you want ondemand and it is already, just change to conservative and then back)
-not necessary but really recommended- Download a SD tweak app and change the setting to 2048
*Download battery widget and place it somewhere (fixes battery issues)
*Go into settings-display-animations-all
Look at this http://www.tested.com/news/25-essential-tweaks-to-perform-on-your-new-android-phone/1656/
Replace your sprint voice mail with Google Voice and delete the default sprint voice mail XD
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
This is RFS-only. There is no EXT4 support - believe me, ACS tried to hack it in there for you, but it's just not happening right now. Other devs are welcome to try, but ACS doesn't believe it's possible at this point. However, the kernel is rooted, and contains Busybox for your device usage pleasure.
CREDITS:
Cyanogen
ACS
Google
Sprint
Samsung
Darkyy
Impaler
ACS leaker
K0nane
TheDub
Init.d support would really be nice...
I need some help wiff teh AOSP lock...
Not familiar with how to remove CIQ
YOU NEED RFS (CWM 2.x.x OR CWM 3.0.2.5). Only tested on CWM 2, don't trust CWM 3, IDK why.
Open source licenses: http://source.android.com/source/licenses.html
Flash the rerfs first
Bugs:
4g is non functional.
Phone only powers on while unplugged (plug in after boot). Still charges, just doesnt boot.
This leak is from ACS's leaker and I hold no legal responsibility regarding the ED12 leak, I am unaware who this leaker is, but I just modified what was made available for speed and stability.
Support is discontinued until ee03 rom is done.
I'm so glad to see someone working on this!
Sent from my SPH-D700 using Tapatalk
No CIQ
Sent from my SPH-D700 using XDA App
Is it possible for you to add the screen on/off animations?
Sent from my SPH-D700 using XDA Premium App
ksmullins88 said:
No CIQ
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
your funny, but not anytime soon. =/
chouston33 said:
Is it possible for you to add the screen on/off animations?
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
He already talked about this, look through his thread's.
My request would be to take the theme from Simply AOSP ROM and port it over to this new rom. Just the basic's. not all of it. so it's more gingerish.
Shoulon said:
your funny, but not anytime soon. =/
He already did this, look through his thread's.
My request would be to take the theme from Simply AOSP ROM and port it over to this new rom.
Click to expand...
Click to collapse
Ill do the aosp theme.
Sent from my SPH-D700 using XDA App
AOSP launcher or tw?
Would be nice to have touchwiz-4.0, if possible.
Sent from my SPH-D700 using XDA App
WIP threads are stupid.
bigray327 said:
WIP threads are stupid.
Click to expand...
Click to collapse
I needed suggestions
My suggestion would be to wait.
(Taken from ACS's OP on ED12)
Known Bugs
4G non-functional
GPS non-functional out of the box - WORKAROUND: get GPS Status from the Market; reset AGPS status (works with wireless networks off)
Wake lag present
Does not boot when plugged in and powered off, unplug to boot
Temperature sensor readings are incorrect. You may see interrupted charging due to bad battery temp readings.
ED12 is really an Alpha if anything. There is a reason other Dev's haven't quickly been updating their ROMs to Gingerbread. It's not ready.
Not to mention there is no source code, no kernel support, etc..
TheDub said:
My suggestion would be to wait.
(Taken from ACS's OP on ED12)
Known Bugs
4G non-functional
GPS non-functional out of the box - WORKAROUND: get GPS Status from the Market; reset AGPS status (works with wireless networks off)
Wake lag present
Does not boot when plugged in and powered off, unplug to boot
Temperature sensor readings are incorrect. You may see interrupted charging due to bad battery temp readings.
ED12 is really an Alpha if anything. There is a reason other Dev's haven't quickly been updating their ROMs to Gingerbread. It's not ready.
Not to mention there is no source code, no kernel support, etc..
Click to expand...
Click to collapse
My suggestion would be to give him suggestions for a ROM he is making, not be a tool. A lot of people want to use Gingerbread now regardless of the issues. I, for one, don't use 4G (not in my area) and don't use GPS. I'd rather sacrifice a little to use Netflix right now.
http://forum.xda-developers.com/showthread.php?t=1050666
I agree to waiting. Just for the fact that so much is non-functioning. However! Just because a few won't be jumping on board doesn't mean you shouldn't DK28 on the bit. Who knows when actual GB will be coming out.
That's a link to TouchWiz 4.0 ported to the Galaxy S. I heard they got it working on the captivate and vibrant as well.
octones said:
My suggestion would be to give him suggestions for a ROM he is making, not be a tool. A lot of people want to use Gingerbread now regardless of the issues. I, for one, don't use 4G (not in my area) and don't use GPS. I'd rather sacrifice a little to use Netflix right now.
Click to expand...
Click to collapse
You're right.. how improper of me to recommend waiting to avoid problems. As requested here are my suggestions..
Suggestions
Fix 4G
Fix GPS
Fix the wake lag
Won't boot if plugged in, recommend fixing that as well
Oh and fix the Temperature Sensors so the battery will charge properly (Anyone else realize that's a huge huge bug?)
I'm not trying to be pessimistic and more power to him or anyone else who makes a ED12 ROM but it's in bad bad shape.. and I'd never recommend building a house with a foundation of mud.
Just saying..
TheDub said:
You're right.. how improper of me to recommend waiting to avoid problems. As requested here are my suggestions..
Suggestions
Fix 4G
Fix GPS
Fix the wake lag
Won't boot if plugged in, recommend fixing that as well
Oh and fix the Temperature Sensors so the battery will charge properly (Anyone else realize that's a huge huge bug?)
I'm not trying to be pessimistic and more power to him or anyone else who makes a ED12 ROM but it's in bad bad shape.. and I'd never recommend building a house with a foundation of mud.
Just saying..
Click to expand...
Click to collapse
He's not ONLY using the ed12. he's using the Nexus S CMDA deoxodized 2.3.4 stock ROM also. So he could come up very high actually.
Well I wish you good luck sir.
marcusant said:
Please post suggestions before it is releases
Click to expand...
Click to collapse
My suggestions:
1) ignore the trolls, they have nothing but negativity to add
2) ignore those that say wait, if you are offering the time, why wait, some people may want even a flaky release to play with
3) add as much black to the theme as possible to help save battery since you said you couldn't do kernel work
4) post updates on your effort a lot, even if it is a "not yet ready, no eta"
Questions, though they may both be a kernel thing:
Will this work only with CWM 2.5.5, as it would only be RFS?
Is it possible for WiFi tether to work with this?
This build should work with the Netflix app, correct?
After all, if the bug list ONLY includes, no 4G, no GPS, wake lag, and battery temp issue, that would make for a pretty good play around with build! Heck, that's a lot better than other "play around with" builds I have tried out in the past!
TheDub said:
Well I wish you good luck sir.
Click to expand...
Click to collapse
+1
Sent from my Epic 4G using XDA.
DCRocks said:
My suggestions:
1) ignore the trolls, they have nothing but negativity to add
2) ignore those that say wait, if you are offering the time, why wait, some people may want even a flaky release to play with
3) add as much black to the theme as possible to help save battery since you said you couldn't do kernel work
4) post updates on your effort a lot, even if it is a "not yet ready, no eta"
Questions, though they may both be a kernel thing:
Will this work only with CWM 2.5.5, as it would only be RFS?
Is it possible for WiFi tether to work with this?
Click to expand...
Click to collapse
Whats wrong with using cwm 3.0.2.5? its rfs compatible also.
TheDub said:
You're right.. how improper of me to recommend waiting to avoid problems. As requested here are my suggestions..
Suggestions
Fix 4G
Fix GPS
Fix the wake lag
Won't boot if plugged in, recommend fixing that as well
Oh and fix the Temperature Sensors so the battery will charge properly (Anyone else realize that's a huge huge bug?)
I'm not trying to be pessimistic and more power to him or anyone else who makes a ED12 ROM but it's in bad bad shape.. and I'd never recommend building a house with a foundation of mud.
Just saying..
Click to expand...
Click to collapse
Lol...
Sent from my SPH-D700 using XDA App
3.0.2.5 only
Sent from my SPH-D700 using XDA App

[Q] Liquid ROM 4.4.2 - Discussion Thread

Flashed this ROM on my Relay. The ROM's pretty customizable and neatly done. Has a custom kernel which let's you tweak the CPU and GPU parameters. However my battery life hasn't been stellar by any means and since I'm using it in India, I have to check the roaming option under the Mobile Networks option. Also, adfree wasn't really doing anything at all. The host file got updated and still the ads weren't being screened. The ROM is no doubt amazing. But these are small issues that's kinda making my ROM experience not so dreamy. Any kinda help and opinion is welcome.
hbk.vix said:
Flashed this ROM on my Relay. The ROM's pretty customizable and neatly done. Has a custom kernel which let's you tweak the CPU and GPU parameters. However my battery life hasn't been stellar by any means and since I'm using it in India, I have to check the roaming option under the Mobile Networks option. Also, adfree wasn't really doing anything at all. The host file got updated and still the ads weren't being screened. The ROM is no doubt amazing. But these are small issues that's kinda making my ROM experience not so dreamy. Any kinda help and opinion is welcome.
Click to expand...
Click to collapse
I've found that on 4.4 adfree has been useless in general. I've since migrated to MoAB, myself.
http://forum.xda-developers.com/showthread.php?t=1916098
Magamo said:
I've found that on 4.4 adfree has been useless in general. I've since migrated to MoAB, myself.
http://forum.xda-developers.com/showthread.php?t=1916098
Click to expand...
Click to collapse
Yes, I've resorted to this as well. Though, sometimes there's a few slip ups. Not too sure as to what the problem is. I read in a couple of forums about the success people have had with adaway on KITKAT. Which is surprising as they do the same job of hosting the hosts file. Maybe Kitkat bypasses or maybe overrides this to get ads back on the apps. Anyway, ATM MoAB's been the most successful.
Liquid Smooth got it's new update with promising results. Hoping all the bugs are squished.
hbk.vix said:
Liquid Smooth got it's new update with promising results. Hoping all the bugs are squished.
Click to expand...
Click to collapse
ummm liquid has built in AppOpps for even better control...its under system settings>apps> select the app> and modify......just thought i should let you all know this
REV3NT3CH said:
ummm liquid has built in AppOpps for even better control...its under system settings>apps> select the app> and modify......just thought i should let you all know this
Click to expand...
Click to collapse
Completely forgot about AppOpps, now you can modify permissions for each app individually, trace out every wakelock and send your phone to slumber.
Would really like to thank REV3NT3CH for his contribution towards this device. You Sir, are simply awesome.
hbk.vix said:
Completely forgot about AppOpps, now you can modify permissions for each app individually, trace out every wakelock and send your phone to slumber.
Would really like to thank REV3NT3CH for his contribution towards this device. You Sir, are simply awesome.
Click to expand...
Click to collapse
Thanks a ton yourself...i'm all about helping the community.

Xposed for 6.0

I'm rooted on stock with twrp, wanted to install some tweaks for the reboot menu and status bar and I know we need xposed for it.
Can anyone guide me as to how to install it? I've read tutorials but wanted to ask the people here. I'm new to this phone.
Much thanks
https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Use ARM/SDK23 for the Galaxy S5.
Sent from my SM-G900P using Tapatalk
good info, im just not sure why people use xposed as opposed to a custom ROM with the features that theyre looking for baked into the ROM
Because sometimes, there are many things "cooked", and if I need 1 or 2 mods, then I don't need to deal with all the bugs that came with custom ROMs.
Sent from my SM-G900P using Tapatalk
csmasn said:
Because sometimes, there are many things "cooked", and if I need 1 or 2 mods, then I don't need to deal with all the bugs that came with custom ROMs.
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
thats pretty fair, but i dont really get many (if any) bugs with custom ROMsif installed correctly. Im not bashing xposed, i just think that custom ROMs are the way to go for my taste
plus, in my experience, using xposed on a stock rom is better, you don't have to deal with any bugs
jafferkhan said:
plus, in my experience, using xposed on a stock rom is better, you don't have to deal with any bugs
Click to expand...
Click to collapse
right on, im glad that it worked well for you! ive had quite the opposite experience with xposed, maybe its just user error tho
youdoofus said:
right on, im glad that it worked well for you! ive had quite the opposite experience with xposed, maybe its just user error tho
Click to expand...
Click to collapse
It can screw things up fast and often! Haha. I use XPosed purely for boot manager and greenify. Those are safe on any rom. Unfortunately there are so many modules you can use on your phone that aren't meant for it. If you're not happy to screw things up to learn what works than it can be a huge headache. Lol. I gave up screwing with many of the modules. Oh. I also use it for no ads and background play for YouTube.
Kreatur3 said:
It can screw things up fast and often! Haha. I use XPosed purely for boot manager and greenify. Those are safe on any rom. Unfortunately there are so many modules you can use on your phone that aren't meant for it. If you're not happy to screw things up to learn what works than it can be a huge headache. Lol. I gave up screwing with many of the modules. Oh. I also use it for no ads and background play for YouTube.
Click to expand...
Click to collapse
man, i havent had a stock ROM in so long, im not sure where id even start LOL
youdoofus said:
man, i havent had a stock ROM in so long, im not sure where id even start LOL
Click to expand...
Click to collapse
I keep it purely for camera quality. I've yet to see a custom rom that compares.
Kreatur3 said:
I keep it purely for camera quality. I've yet to see a custom rom that compares.
Click to expand...
Click to collapse
one of a few things i miss about touchwiz
youdoofus said:
one of a few things i miss about touchwiz
Click to expand...
Click to collapse
You're using it on stock? How does it improve the camera quality?
As I've seen... I'm using the s5 for a second phone while my first is a note 5 which is the best phone I've used, after I had to give away my note 7.
And also that the camera on the s5 is not bad either... I just don't like it when it asks me to hold the device steady while it's taking a photo...
jafferkhan said:
And also that the camera on the s5 is not bad either... I just don't like it when it asks me to hold the device steady while it's taking a photo...
Click to expand...
Click to collapse
no, im on resurrection remix nowadays and very much miss the TW camera. I ran MOAR for over a year and wanted to try out the AOSP ROMs that everyone was ranting about, and i rather enjoy several things about RR, but the camera is rather lackluster on AOSP. TW ROMs have access to the stock Samsung camera, which is awesome!! I really havent found much that just WOWs me about AOSP vs MOAR other than the fact that MOAR isnt being updated anymore (yes, you jsut witnessed someone remind themselves about why they decided on something that they had totally forgotten LoL) I spent a little time finding out if one could port the stock TW cam to AOSP, but apparently its not possible
youdoofus said:
no, im on resurrection remix nowadays and very much miss the TW camera. I ran MOAR for over a year and wanted to try out the AOSP ROMs that everyone was ranting about, and i rather enjoy several things about RR, but the camera is rather lackluster on AOSP. TW ROMs have access to the stock Samsung camera, which is awesome!! I really havent found much that just WOWs me about AOSP vs MOAR other than the fact that MOAR isnt being updated anymore (yes, you jsut witnessed someone remind themselves about why they decided on something that they had totally forgotten LoL) I spent a little time finding out if one could port the stock TW cam to AOSP, but apparently its not possible
Click to expand...
Click to collapse
Have you used flat style bar indicators? It doesn't seem to work properly. The issue that I'm having is that it won't show the data icon even when I'm connected...
I want to change the look of the status bar... Any suggestions?
jafferkhan said:
Have you used flat style bar indicators? It doesn't seem to work properly. The issue that I'm having is that it won't show the data icon even when I'm connected...
I want to change the look of the status bar... Any suggestions?
Click to expand...
Click to collapse
not really, if youre running a stock ROM because it takes an xposed module to do it and im just too unfamiliar with those to be of any help

Android Q preview for Pixel?

I hope you'll have read this tweet
https://twitter.com/MishaalRahman/status/1104977146081169409?s=19
Android Q is near, Do you guys think we Pixel users will be getting Android Q Preview?
Doesn't seem likely but never know, I hope so, but even if it doesn't happen officially I'm still pretty sure we'll see custom Q roms
Sent from my Pixel using Tapatalk
Looks like the first beta is up! We are in!
Installed and running fine ... Pretty sweet we're in but with a 3 yo phone I just hope that it doesn't slow down too bad
Xalies said:
Installed and running fine ... Pretty sweet we're in but with a 3 yo phone I just hope that it doesn't slow down too bad
Click to expand...
Click to collapse
Couldn't resist trying it out. So far running great. Too soon to make any real conclusions at this point though. If it isn't as good as pie at least we can always go back
Sent from my Pixel using Tapatalk
Did you have to wipe user data after you enrolled for the preview?? Or is it just like an ota update leaving user data.
odlay75 said:
Did you have to wipe user data after you enrolled for the preview?? Or is it just like an ota update leaving user data.
Click to expand...
Click to collapse
it just installed like an OTA, no wipe
is it a daily driver?
Guys do let us know if it is a daily driver or not. I really wanna try this out.
And list bugs you encounter here also please
odlay75 said:
Did you have to wipe user data after you enrolled for the preview?? Or is it just like an ota update leaving user data.
Click to expand...
Click to collapse
It's like an Ota... But I wiped anyways and it states that if you opt out of the beta program you'll need to wipe to go back. If you stay in until the beta program ends though it'll just Ota you to the official without needing a wipe
Sent from my Pixel using Tapatalk
Impressions so far:
- scrolling is noticably smoother, whether it's web pages or news content on the glauncher.
- battery seems to be better than Pie. The standby is definitely better, but I should note that I used a battery recalibration app right after updating (for the first time).
- the device seems to stay cooler under normal load. For whatever reason, it got hot doing some basic things in Pie and the battery life drained quickly.
- no bugs so far, all of my apps still work from what I can tell. Surprisingly stable for a first preview.
SilentAce07 said:
Impressions so far:
- scrolling is noticably smoother, whether it's web pages or news content on the glauncher.
- battery seems to be better than Pie. The standby is definitely better, but I should note that I used a battery recalibration app right after updating (for the first time).
- the device seems to stay cooler under normal load. For whatever reason, it got hot doing some basic things in Pie and the battery life drained quickly.
- no bugs so far, all of my apps still work from what I can tell. Surprisingly stable for a first preview.
Click to expand...
Click to collapse
I agree, so far its working very well, no problems for me, I used OTA
Works fine, but when i tap on last button in settings "tips and support" app crashes. System-wide "dark" theme is not dark but pure black. Thi is annoying for my eyes, dark grey is much better for me.
Chase mobile app crashes after a couple min. Can anyone confirm the same?
Sent from my Pixel using Tapatalk
---------- Post added at 10:27 PM ---------- Previous post was at 09:30 PM ----------
joywork said:
Works fine, but when i tap on last button in settings "tips and support" app crashes. System-wide "dark" theme is not dark but pure black. Thi is annoying for my eyes, dark grey is much better for me.
Click to expand...
Click to collapse
Where is the system wide dark theme?
Sent from my Pixel using Tapatalk
Where is the system wide dark theme?
Enable: adb shell settings put secure ui_night_mode 2
Disable: adb shell settings put secure ui_night_mode 1
For now toggle is missing
May be 3 for gray ?
Dark mode is not worth yet. Cant use Google photos. And maybe few other apps which are not discovered yet .
Try battery saver dark mode and check if you can live with google photos (side menu, etc)
If you can then go for it.
Otherwise not even a single crash yet on android Q beta q. Its a good experience so far.
Can be used as Daily driver.
New gestures are pretty laggy for me.
Mi band 3 does not reconnect
kissme99 said:
New gestures are pretty laggy for me.
Click to expand...
Click to collapse
It's been quite buggy for me, there are times when I open some apps and the system freezes completely, but I've seen some users don't complain at all , is it my device model or something...?
Ezro_nightmare said:
It's been quite buggy for me, there are times when I open some apps and the system freezes completely, but I've seen some users don't complain at all , is it my device model or something...?
Click to expand...
Click to collapse
No not your device..., It freezes sometimes like once in a day but see its just a beta 1 i tend to ignore that 1 time a day thing.
And if you think its too buggy then try a clean flash or formatting your device once. It helps.

Categories

Resources