Database Info

[Q] boot loop after twrp recovery flash

Hi, I tried to root and ended up with boot loop (HTC screen).
My steps:
-unlocked bootloader (OK)
-in cmd executed: fastboot flash recovery using TWRP 2.6.0.0.img (OK)
-and i couldn't boot twrp recovery in cmd: fastboot boot recovery ...img - error message FAILED remote:incomplete boot image
Any advice? Do I need to flash back to stock recovery? Where can I download it? The attached is my software version. I would like to start my mobile only. I don't care about root at this stage. thanks for your help.

kureka1 said:
Hi, I tried to root and ended up with boot loop (HTC screen).
My steps:
-unlocked bootloader (OK)
-in cmd executed: fastboot flash recovery using TWRP 2.6.0.0.img (OK)
-and i couldn't boot twrp recovery in cmd: fastboot boot recovery ...img - error message FAILED remote:incomplete boot image
Any advice? Do I need to flash back to stock recovery? Where can I download it? The attached is my software version. I would like to start my mobile only. I don't care about root at this stage. thanks for your help.
Click to expand...
Click to collapse
Reflash the kernel using 'fastboot flash boot boot.img'.
Jmz M4 Kernel
Bubba Kernel

Ecstacy42 said:
Reflash the kernel using 'fastboot flash boot boot.img'.
Jmz M4 Kernel
Bubba Kernel
Click to expand...
Click to collapse
Thanks a lot. I am little lost:
- by using JMZ I flashed: 'Fastboot flash boot boot.img'
- and tried to reboot to recovery in order to flash zip but it is the same result still does not recover or reboot.
What do I do now? I appreciate your help.

kureka1 said:
Hi, I tried to root and ended up with boot loop (HTC screen).
My steps:
-unlocked bootloader (OK)
-in cmd executed: fastboot flash recovery using TWRP 2.6.0.0.img (OK)
-and i couldn't boot twrp recovery in cmd: fastboot boot recovery ...img - error message FAILED remote:incomplete boot image
Any advice? Do I need to flash back to stock recovery? Where can I download it? The attached is my software version. I would like to start my mobile only. I don't care about root at this stage. thanks for your help.
Click to expand...
Click to collapse
Hi,
you should erase cache (fastboot erase cache). Then try to start recovery directly from phone cause Fastboot boot will only start an
boot Image not recovery.

kureka1 said:
Thanks a lot. I am little lost:
- by using JMZ I flashed: 'Fastboot flash boot boot.img'
- and tried to reboot to recovery in order to flash zip but it is the same result still does not recover or reboot.
What do I do now? I appreciate your help.
Click to expand...
Click to collapse
You might have a corrupted download. Try verifiying the MD5 hashes and if they don't match re-download/flash it.

Any way to get out of my problem ?!

Hello ! iam new here and i have a really big problem !​
I Have Huwaei Honor 6 H60-L04 ! i was have liquid smooth 4.4 rom on it and i decided to install stock rom on it !! i flashed stock boot.img and stock recovery.img by rasher and after reboot my phone i got this error ( Attention PLease update system again ) i tried to flash system , boot , cust , recovery by fastboot but i got this error FAILED (remote: Command not allowed) and i tried to flash custom recovery by fastboot but i got same error ! i have unlocked bootloader ! i dont what to do ?
PLease help !!
NOTICE : SORRY FOR MY ENGLISH​
THANKS ALL <3​

Install in this order, using fastboot:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
fastboot reboot

badmania98 said:
Install in this order, using fastboot:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
fastboot reboot
Click to expand...
Click to collapse
Failed ( remote : command not allowed )

Use stock files, not custom. Extracted from a stock ROM for L04.

badmania98 said:
Use stock files, not custom. Extracted from a stock ROM for L04.
Click to expand...
Click to collapse
i tried that but same error

Try to use H6 multitool ( http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060 ) and reinstal stock recovery. You have to start the program using Honor6MultiTool.bat file and folowing the instruction on the screen. The program will get the recovery file from net automaticaly. After that try to write using the steps from 2nd post or use the same H6 multitool with unbrick solution.

badmania98 said:
Try to use H6 multitool ( http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060 ) and reinstal stock recovery. You have to start the program using Honor6MultiTool.bat file and folowing the instruction on the screen. The program will get the recovery file from net automaticaly. After that try to write using the steps from 2nd post or use the same H6 multitool with unbrick solution.
Click to expand...
Click to collapse
Same error i dont know what to do i tried everything

No ideea left.

Amjadaboudi22 said:
Failed ( remote : command not allowed )
Click to expand...
Click to collapse
try disconnecting the usb data cable after each fastboot command

root needed
Hi there,
seems like you lost root access when you flashed stock hence you keep getting the error try re-rooting your phone and then flash all files mentioned again,maybe that will help best of luck hope this helpsDont forget to thank

huawei g6 l11 b119

dear my friends have g6 l11 b119 ,but I cannot flash it, i downloaded b116 b118 ,b370 but got always error ,only vendor file i had flashed from b116 ,now phone lost home screen ,it has viruses and I need to flash it please help me?

what error did you get?
where did you place the update.zip / update.app files?

can I flash it with fastboot ? I extraxted recovery and system ,I unlocked bootloader and flashed recovery but system always got too many links and can not flash it

kerpua said:
can I flash it with fastboot ? I extraxted recovery and system ,I unlocked bootloader and flashed recovery but system always got too many links and can not flash it
Click to expand...
Click to collapse
What do you mean "too many links" ?! please explain your problem clearly so we can help you better.
have you tried flashing via these commands? :
Code:
fastboot -i flash recovery recovery.img
fastboot -i flash system system.img
fastboot -i flash boot boot.img

Stuck rescue mode, can't enter to bootloader

Hello everyone
I'm in a huge trouble, I flashed recovery partition using twrp on oreo firmware by mistake and now I can't enter to bootloader mode to reflash recovery using the extracted recovery.img from UPDATE.APP.
I already tried:
dload folder with UPDATE.APP and pressing volume down, volume up and power button
Press & hold power button and plug the USB cable
Neither of them work, and my phone is stucked in ERROR MODE saying:
Attention!
Plase update system again
Error!
Func NO: 11 (recovery image)
Error No: 2 (load failed!)
Please help, I do not what to do or at least enter to bootloader to reflash the custom recovery.

Hi, I have the same problem. Were you able to fix it?

plug in usb, hold power and vol down until you get to fastboot.
If you are on OREO now, make sure to extract recovery_ramdisk and recovery_kernel, and flash both in fastboot
fastboot flash recovery_ramdisk RECOVERY_RAMDISK.img
fastboot flash recovery_kernel RECOVERY_KERNEL.img
If you can't find RECOVERY_RAMDISK you're using a nougat update.app.

ante0 said:
plug in usb, hold power and vol down until you get to fastboot.
If you are on OREO now, make sure to extract recovery_ramdisk and recovery_kernel, and flash both in fastboot
fastboot flash recovery_ramdisk RECOVERY_RAMDISK.img
fastboot flash recovery_kernel RECOVERY_KERNEL.img
If you can't find RECOVERY_RAMDISK you're using a nougat update.app.
Click to expand...
Click to collapse
Hi,
I would like to know where to find RECOVERY_KERNEL.img, as there's no UPDATE.APP contains it.
I have the very same problem, but I managed to enter the fastboot though.
Another question, how to flash the erecovery partitions, it seems it has been blocked from access.
thanks.:good:

liuyujack said:
Hi,
I would like to know where to find RECOVERY_KERNEL.img, as there's no UPDATE.APP contains it.
I have the very same problem, but I managed to enter the fastboot though.
Another question, how to flash the erecovery partitions, it seems it has been blocked from access.
thanks.:good:
Click to expand...
Click to collapse
Woops. There's no recovery_kernel. There's ERECOVERY_KERNEL.
Recovery most likely uses regular KERNEL.
You can flash erecovery partitions in twrp, using dd.

ante0 said:
Woops. There's no recovery_kernel. There's ERECOVERY_KERNEL.
Recovery most likely uses regular KERNEL.
You can flash erecovery partitions in twrp, using dd.
Click to expand...
Click to collapse
Thanks for the explanation. however, to leave the error mode, I flashed recovery_ramdisk, ramdisk, kernel, and system, but it still stuck there the moment I leave the fastboot with the same error code.
Do you know why this is or have any solution?
Thanks.

liuyujack said:
Thanks for the explanation. however, to leave the error mode, I flashed recovery_ramdisk, ramdisk, kernel, and system, but it still stuck there the moment I leave the fastboot with the same error code.
Do you know why this is or have any solution?
Thanks.
Click to expand...
Click to collapse
Same error code as: Error!
Func NO: 11 (recovery image)
Error No: 2 (load failed!)
?

ante0 said:
Same error code as: Error!
Func NO: 11 (recovery image)
Error No: 2 (load failed!)
?
Click to expand...
Click to collapse
yes, exactly

ante0 said:
Same error code as: Error!
Func NO: 11 (recovery image)
Error No: 2 (load failed!)
?
Click to expand...
Click to collapse
liuyujack said:
yes, exactly
Click to expand...
Click to collapse
additional information:
fastboot oem lock-state info
...
(bootloader) FB LockState: LOCKED
(bootloader) USER LockState: UNLOCKED
OKAY [ 0.007s]
finished. total time: 0.007s

as: Error!
Func NO: 14 (no image found)
Error No: 2 (load failed!)
similar one here. Is there any solution?

liuyujack said:
yes, exactly
Click to expand...
Click to collapse
Hi !
Did you find a solution ?

I have the same errors, Desperately looking for a solution.... Did anyone get it figured out?
Thanks

I finally figured it out. Hopefully this will help somebody else. I ended up fixing it by using DC unlocker. That Basically got me to where I could boot into erecovery. It also allowed me to use ADB to flash TWRP. From there I just flashed the entire hwota8 package. I'm back up and running thankfully. Once again, I really appreciate you and people like you who help others on this forum.

seti007 said:
I finally figured it out. Hopefully this will help somebody else. I ended up fixing it by using DC unlocker. That Basically got me to where I could boot into erecovery. It also allowed me to use ADB to flash TWRP. From there I just flashed the entire hwota8 package. I'm back up and running thankfully. Once again, I really appreciate you and people like you who help others on this forum.
Click to expand...
Click to collapse
Could you do a guide for that?

Has anyone found a solution.? Im about ready to jump the gun on dc phoenix. But if someone found an alternative, it would really help.

twrp stuck in twrp logo and bootloop also

hi
i was trying to flash twrp .. i flashed but it stucked at twrp so i tried again .. while doing i flashed vbmeta file then twrp file .. now i cant boot my phone to rom as well as twrp
pl help

pankaj_123 said:
hi
i was trying to flash twrp .. i flashed but it stucked at twrp so i tried again .. while doing i flashed vbmeta file then twrp file .. now i cant boot my phone to rom as well as twrp
pl help
Click to expand...
Click to collapse
Which twrp u r flashing? Ptwrp or offical one? Try to flash orangefox from adb it is best over all the other ones.
Sent from my Redmi Note 7 Pro using XDA Labs

Recovery twrp 3.1.1b. Something

pankaj_123 said:
hi
i was trying to flash twrp .. i flashed but it stucked at twrp so i tried again .. while doing i flashed vbmeta file then twrp file .. now i cant boot my phone to rom as well as twrp
pl help
Click to expand...
Click to collapse
After flashing twrp
Use fastboot erase userdata command via adb
Then reboot to twrp

aarush.chaurasiya said:
After flashing twrp
Use fastboot erase userdata command via adb
Then reboot to twrp
Click to expand...
Click to collapse
fastboot erase userdata
This command works!! This was amazing man , I was searching for this for the last 3 days , my phone used to get stuck at teamwin splash logo!
Thanks man! I owe you big time.

aarush.chaurasiya said:
After flashing twrp
Use fastboot erase userdata command via adb
Then reboot to twrp
Click to expand...
Click to collapse
You saved my ass (K30 5G). Thanks m8.

Thank you guys for answers. I have mi 8 lite and I've been trying to fix splash logo bug for almost 3 days. Here's what worked for me:
1. enter fastboot and enter these commands
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase userdata
fastboot erase cache
2. Boot into recovery using volume buttons, not fastboot.

floor_official said:
Thank you guys for answers. I have mi 8 lite and I've been trying to fix splash logo bug for almost 3 days. Here's what worked for me:
1. enter fastboot and enter these commands
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase userdata
fastboot erase cache
2. Boot into recovery using volume buttons, not fastboot.
Click to expand...
Click to collapse
This has worked for me perfectly! Thanks!
I get this problem on my Mi 8 SPECIFICALLY after installing Pixel Experience. With other ROMs I don't have this issue.

Hi,
Question about the 'fastboot erase userdata' command : does it format the phone ? I mean, I have my phone running, Pixel Experience 12 on Oneplus 5T, and I would like to apply an update, and no way to enter in TWRP...
I wouldn't have to reinstall everything after that.
Thanks in advance

Hello Friends in dipper & PE I got this message at each time when trying to update :
adb sideload PixelExperience_dipper-12.1-20220521.zip
loading: 'PixelExperience_dipper-12.1-20220521.zip'
* cannot read 'PixelExperience_dipper-12.1-20220521.zip' *
& I don't know what to do; other recoveries get stuck on logo (TWRP, Orange fox)
I just succeed to root with magisk (by sideloading).
Is the ROM OK? I Ihoped with factory reset and changing recovery, not better...
Thanks for your help