Hello ! iam new here and i have a really big problem !
I Have Huwaei Honor 6 H60-L04 ! i was have liquid smooth 4.4 rom on it and i decided to install stock rom on it !! i flashed stock boot.img and stock recovery.img by rasher and after reboot my phone i got this error ( Attention PLease update system again ) i tried to flash system , boot , cust , recovery by fastboot but i got this error FAILED (remote: Command not allowed) and i tried to flash custom recovery by fastboot but i got same error ! i have unlocked bootloader ! i dont what to do ?
PLease help !!
NOTICE : SORRY FOR MY ENGLISH
THANKS ALL <3
Install in this order, using fastboot:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
fastboot reboot
badmania98 said:
Install in this order, using fastboot:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
fastboot reboot
Click to expand...
Click to collapse
Failed ( remote : command not allowed )
Use stock files, not custom. Extracted from a stock ROM for L04.
badmania98 said:
Use stock files, not custom. Extracted from a stock ROM for L04.
Click to expand...
Click to collapse
i tried that but same error
Try to use H6 multitool ( http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060 ) and reinstal stock recovery. You have to start the program using Honor6MultiTool.bat file and folowing the instruction on the screen. The program will get the recovery file from net automaticaly. After that try to write using the steps from 2nd post or use the same H6 multitool with unbrick solution.
badmania98 said:
Try to use H6 multitool ( http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060 ) and reinstal stock recovery. You have to start the program using Honor6MultiTool.bat file and folowing the instruction on the screen. The program will get the recovery file from net automaticaly. After that try to write using the steps from 2nd post or use the same H6 multitool with unbrick solution.
Click to expand...
Click to collapse
Same error i dont know what to do i tried everything
No ideea left.
Amjadaboudi22 said:
Failed ( remote : command not allowed )
Click to expand...
Click to collapse
try disconnecting the usb data cable after each fastboot command
root needed
Hi there,
seems like you lost root access when you flashed stock hence you keep getting the error try re-rooting your phone and then flash all files mentioned again,maybe that will help best of luck hope this helpsDont forget to thank
Related
3 days ago I got a lollipop ota update to my fe170cg. Everything is cool except rooting. I want to root this device like a used to do at kitkat.
But I couldn't find any solution to root this device. I also tried VampireFo's tethered CWM recovery but no luck with that it is not even flashing CWM because of the tigth locked asus lollipop bootloader. I also tried to downgrade to kitkat because of the lollipop recovery But I couldn't downgrade. Now I have no more chance to root this device. And no chance to downgrade to kitkat as well. So I decided to ask professionals like you. I really need help!!. Any help would be appreciated. Thanks from now for any response.
FreeAgentNBS said:
3 days ago I got a lollipop ota update to my fe170cg. Everything is cool except rooting. I want to root this device like a used to do at kitkat.
But I couldn't find any solution to root this device. I also tried VampireFo's tethered CWM recovery but no luck with that it is not even flashing CWM because of the tigth locked asus lollipop bootloader. I also tried to downgrade to kitkat because of the lollipop recovery But I couldn't downgrade. Now I have no more chance to root this device. And no chance to downgrade to kitkat as well. So I decided to ask professionals like you. I really need help!!. Any help would be appreciated. Thanks from now for any response.
Click to expand...
Click to collapse
Hey there!
Not sure this will help you or not..for me it just doing good. Try use fastboot
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. UL-K012-WW-11.2.3.33-user
Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img).
Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
fastboot reboot-bootloader
then you get your droidboot back.
user Temp CWM IntelAndroid-FBRL-05-16-2015-PTR to flash UL-K012-WW-11.2.3.33-user
so that you can downgrade to kitkat
BigBadWolf90 said:
Hey there!
Not sure this will help you or not..for me it just doing good. Try use fastboot
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. UL-K012-WW-11.2.3.33-user
Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img).
Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
fastboot reboot-bootloader
then you get your droidboot back.
user Temp CWM IntelAndroid-FBRL-05-16-2015-PTR to flash UL-K012-WW-11.2.3.33-user
so that you can downgrade to kitkat
Click to expand...
Click to collapse
Thanks a lot It worked :good:
thanx a lot it worked
It worked at-last ....
BigBadWolf90 said:
Hey there!
Not sure this will help you or not..for me it just doing good. Try use fastboot
fastboot erase cache
fastboot erase system
fastboot erase userdata
Then you need you flash the a stock firmware. UL-K012-WW-11.2.3.33-user
Download the appropriate firmware from Asus website. There are three .img files in the firmware zip file (fastboot.img, boot.img, splashscreen.img).
Copy all these three files to the extracted folder. Now type the following command in the command window one by one:
fastboot flash fastboot fastboot.img
fastboot flash boot boot.img
fastboot flash splashscreen splashscreen.img
fastboot reboot-bootloader
then you get your droidboot back.
user Temp CWM IntelAndroid-FBRL-05-16-2015-PTR to flash UL-K012-WW-11.2.3.33-user
so that you can downgrade to kitkat
Click to expand...
Click to collapse
:good::good::good: Thank you so much dude..:highfive: :victory: Now it is working ..
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
shubham412302 said:
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
Click to expand...
Click to collapse
maybe you can flash the b500 again?
shubham412302 said:
my L04 was running b500 5.1.1 and i flashed recovery, system, cache, boot, cust and userdata to go back to b370 but my device is boot looping and is not entering fastboot and recovery mode just show bootlogo
please help
Click to expand...
Click to collapse
Hi,
The same boot loop error also I encountered , and here is how i solved it.
1. First U need to download this tool -> HONOR_6_and_6Plus_Multi-Tool
2. run the Honor6MultiTool.bat
3. it will ask to install universal ADB driver. follow the instruction and install
4. then 6th option will be UNBRICK, Enter ur choice: 6
5. Then u follow the instruction
After that the phone will boot.
If any problem will occur do comment below.
All The Best!!
biswajit_kar said:
Hi,
The same boot loop error also I encountered , and here is how i solved it.
1. First U need to download this tool -> HONOR_6_and_6Plus_Multi-Tool
2. run the Honor6MultiTool.bat
3. it will ask to install universal ADB driver. follow the instruction and install
4. then 6th option will be UNBRICK, Enter ur choice: 6
5. Then u follow the instruction
After that the phone will boot.
If any problem will occur do comment below.
All The Best!!
Click to expand...
Click to collapse
the device does not enters fastboot mode just show the bootlogo
it enters fastboot but still the device wont boot
can you tell me the commands to flash all files from the update.app from fastboot
maybe that will solve the issue
DOWNLOAD stock firmware (update.app) extract from it Recovery.img system.img boot.img cache.img cust.img.and userdata.img. then turn your mobile in fastboot and connect to usb, open CMD in PC and write CD "path to adb.exe", when you are there, copy extracted files there too and write in CMD this lines:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
when you will finish write FASTBOOT REBOOT and that's all
Sent from my H60-L04 using XDA Free mobile app
Following. Reply if what Biswajit told you worked in reverting from Lollipop. Have you done this yourself Biswajit?
biswajit_kar said:
DOWNLOAD stock firmware (update.app) extract from it Recovery.img system.img boot.img cache.img cust.img.and userdata.img. then turn your mobile in fastboot and connect to usb, open CMD in PC and write CD "path to adb.exe", when you are there, copy extracted files there too and write in CMD this lines:
fastboot flash recovery RECOVERY.img
fastboot flash system SYSTEM.img
fastboot flash boot BOOT.img
fastboot flash cache CACHE.img
fastboot flash cust CUST.img
fastboot flash userdata USERDATA.img
when you will finish write FASTBOOT REBOOT and that's all
Sent from my H60-L04 using XDA Free mobile app
Click to expand...
Click to collapse
i tried this already but it did not work
i think flashing all the 22 files from the update.app file will work
or i have to wait till the lollipop update file comes out
my bootloader is unlocked so will my device be repaired under warranty(huawei didn't mentioned voiding warranty by unlocking bootloader while getting the code)
shubham412302 said:
i tried this already but it did not work
i think flashing all the 22 files from the update.app file will work
or i have to wait till the lollipop update file comes out
my bootloader is unlocked so will my device be repaired under warranty(huawei didn't mentioned voiding warranty by unlocking bootloader while getting the code)
Click to expand...
Click to collapse
Yes.
Though You can relock that by using the tool HONOR_6_and_6Plus_multi_tool from here .
try it. wish u luck.
http://forum.xda-developers.com/showthread.php?t=3142268
shubh_007 said:
http://forum.xda-developers.com/showthread.php?t=3142268
Click to expand...
Click to collapse
That would have worked but i already gave my phone to the service centre
shubham412302 said:
the device does not enters fastboot mode just show the bootlogo
it enters fastboot but still the device wont boot
can you tell me the commands to flash all files from the update.app from fastboot
maybe that will solve the issue
Click to expand...
Click to collapse
try this method
http://forum.xda-developers.com/honor-6/general/revert-h60-l04-emui-3-1-to-emui-3-0-t3142268
dear my friends have g6 l11 b119 ,but I cannot flash it, i downloaded b116 b118 ,b370 but got always error ,only vendor file i had flashed from b116 ,now phone lost home screen ,it has viruses and I need to flash it please help me?
what error did you get?
where did you place the update.zip / update.app files?
can I flash it with fastboot ? I extraxted recovery and system ,I unlocked bootloader and flashed recovery but system always got too many links and can not flash it
kerpua said:
can I flash it with fastboot ? I extraxted recovery and system ,I unlocked bootloader and flashed recovery but system always got too many links and can not flash it
Click to expand...
Click to collapse
What do you mean "too many links" ?! please explain your problem clearly so we can help you better.
have you tried flashing via these commands? :
Code:
fastboot -i flash recovery recovery.img
fastboot -i flash system system.img
fastboot -i flash boot boot.img
I was using cm13 sprout 4 and twrp recovery. Was getting error unfortunately ---- apps stopped again again from different apps.
So simply thought of wiping cache and dalvik from twrp . It gave error e: can't mount /cache. So thought of formattig data but by mistake instead of factory reset, i formatted my android. Now i have no os installed just a twrp and unlocked bootloader with me.
now it gives error also E: can't mount/ system also.
pls help, i have only this night to fix it , tight schedule ahead
Try to flash 4.4.4 (posted here) with SPTools. Then install TWRP and update to 6.0.1.
thanks for reply bro!!
but is their any alternate to sp flash tools.
As my sp flash tool does not detect my device. I have tried it many times on different pcs.
MihaiSG said:
Try to flash 4.4.4 (posted here) with SPTools. Then install TWRP and update to 6.0.1.
Click to expand...
Click to collapse
thanks for reply bro!!
but is their any alternate to sp flash tools.
As my sp flash tool does not detect my device. I have tried it many times on different pcs.
i have tried before on this thread also.
http://forum.xda-developers.com/sparkle-v/general/stock-firmware-t2889509/page5
#41
today i tried these commands in fastboot :
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
all commands finished successfully but strangely their no change in my device.
then i tried flashing cwm recovery
fastboot flash recovery cwm.img
but when i boot in recovery it was twrp only.
so i think the flash command from fastboot is not working.
pls help...
Now i managed to get my friends pc and flashed stock rom using sp flash tool , everything went smoothly without any error but strangely nothing happened in device. It remains same without any os . Is my device completely damaged?? :'(
i am attaching logs
please someone reply....
ghanta said:
i am attaching logs
please someone reply....
Click to expand...
Click to collapse
I used sp flash tool format+download option and flashed stock rom. Now its not even booting or charging anymore. Went to service center they simply said its dead buy a new one...
It is being detected by sp flash tools even now also.
Is their anyone who can help me out here???
i don't want to loose my device
please,anyone help
ghanta said:
I used sp flash tool format+download option and flashed stock rom. Now its not even booting or charging anymore. Went to service center they simply said its dead buy a new one...
It is being detected by sp flash tools even now also.
Is their anyone who can help me out here???
i don't want to loose my device
please,anyone help
Click to expand...
Click to collapse
Hi.. i am also facing the same problem. Did you solve it?? Or what did you do?
I have to buy a new phone.
It is still lying in one corner waiting for any solution if you can find
Karbonn Sparkle V
I have the same issue of mounting system as well as cache and data partition shows error and does not mount.
I did use below commands which completed successfully but does affect my device:
fastboot oem unlock (Press Vol+)
fastboot flash preloader preloader_sprout.bin
fastboot flash protect1 protect_f.img
fastboot flash protect2 protect_s.img
fastboot flash bootloader bootloader.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash secro secro.img
fastboot flash para para.img
fastboot flash logo logo.bin
fastboot flash oem oem.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot oem lock (Press Vol+)
fastboot reboot
Rajesh Jakhal
Got a solution!
This is kind of late but I hope this helps other people who have the same issue and are viewing this thread!
Take the battery out of your phone and connect it to your computer. Use SP flash tools and flash the stock rom, using the option, "Format All + Download"
You may have to press a button or button combination to get SPFT to recognize your phone. My phone's volume rockers don't work so I cant help you with that, it was pure luck for me!
Once you let it flash, let the phone boot. It will take some time, longer than usual but it WILL boot. And the bootloader will be locked, so be prepared to start tinkering from scratch!
Hi, I need your help....
Where can I find ROM with system.img, boot.img, userdata.img etc ?
for some reasons, mainly because i'm a dumb, i erased the entire partition of the OPO64.
Now, the only things I can do is to boot into :
- Fastboot Mode
- TWRP (that I installed just before doing silly things, like wiping everything out...)
I am wondering how to reinstall any OS on my phone, LineageOS or RR or anything else to get this phone working again. As there is no physical SDcard slot, I can't put a ROM on it to flash it from TWRP.
the only ROM I've found is CM13.x found here : https://www.androidsage.com/2016/08...anogen-os-13-1-2-znh2kas3p0-update-cm-13-1-2/
is it possible to get some other ROM with all the .img files ?
adb commands do not work.
The only thing I ca do is using fasboot commands.
As far as I understood, I could use there commands :
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
BUT : when I unzip all the ROMs I've found so far, there is always a boot.img file (and the fastboot flash boot boot.img works), but there is no other IMG file in the ZIP. No system.img, no userdata.img etc
Where can I download a ROM providing these files ?
is it mandatory to flask recovery.img ? I still want to use TWRP
Many many thanks
cm-13.1.2-ZNH2KAS3P0-bacon-signed-fastboot-76d803f730
cm-13.1.2-ZNH2KAS3P0-bacon-signed-fastboot-76d803f730 - FLASH it through BRT - Bacon Root Toolkit
flyjodel said:
Hi, I need your help....
Where can I find ROM with system.img, boot.img, userdata.img etc ?
for some reasons, mainly because i'm a dumb, i erased the entire partition of the OPO64.
Now, the only things I can do is to boot into :
- Fastboot Mode
- TWRP (that I installed just before doing silly things, like wiping everything out...)
I am wondering how to reinstall any OS on my phone, LineageOS or RR or anything else to get this phone working again. As there is no physical SDcard slot, I can't put a ROM on it to flash it from TWRP.
the only ROM I've found is CM13.x found here : https://www.androidsage.com/2016/08...anogen-os-13-1-2-znh2kas3p0-update-cm-13-1-2/
is it possible to get some other ROM with all the .img files ?
adb commands do not work.
The only thing I ca do is using fasboot commands.
As far as I understood, I could use there commands :
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
BUT : when I unzip all the ROMs I've found so far, there is always a boot.img file (and the fastboot flash boot boot.img works), but there is no other IMG file in the ZIP. No system.img, no userdata.img etc
Where can I download a ROM providing these files ?
is it mandatory to flask recovery.img ? I still want to use TWRP
Many many thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
It's not mandatory to flash recovery.img.
Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
It's not mandatory to flash recovery.img.
Click to expand...
Click to collapse
thank you !
flyjodel said:
thank you !
Click to expand...
Click to collapse
Instead hit the "thanks button "... Just sayin'