I don't know what is going on but if i will flash zip with android 5.1 (like cm.12.1) or 6 (resurr remix) system doesn't boot. Phone is just turning off and thats all. When i'll flash any nougat it start working. Please help me what i have to do. I want to change Nougat because doesn't have support of Xposed, it's important for me...
sorry for bad english
Engelstrommeln said:
I don't know what is going on but if i will flash zip with android 5.1 (like cm.12.1) or 6 (resurr remix) system doesn't boot. Phone is just turning off and thats all. When i'll flash any nougat it start working. Please help me what i have to do. I want to change Nougat because doesn't have support of Xposed, it's important for me...
sorry for bad english
Click to expand...
Click to collapse
You have nougat bootloader so you can install only nougat roms.
If you want to install lollipop roms you have to do a downgrade to lollipop bootloader.
Sent from my Mi-4c using Tapatalk
@cezarmed2
That means now i have to download original firmware 5.1 and flash it through the fastboot and then i will have good bootloader for cm12.1 ? Maybe i can find it in internet and flash bootlader in TWRP? Adb sideload and fastboot still available
Where i can find that?
https://www.google.ro/amp/s/forum.x...-unlocking-mi4c-bl-verification-t3336779/amp/
Follow steps 2 to 9 and you'll be OK.
Sent from my Mi-4c using Tapatalk
@cezarmed2 thanks for help with the main issue
I did flashed right bootloader and i did flashed cm12.1 without gapps for test. It works fine but now i can't enter recovery mode. It's also interesting because i was trying to flash through the fastboot and android app (flashify) and still does't work :/
Is it possible to flash twrp in honor 6x BLN-L22 Android version (Nougat 7.0) ?. Have tried to flash it using fastboot, after that my device is stuck in "your device is booting now" screen, Is it possible?
RAHUL3387 said:
Is it possible to flash twrp in honor 6x BLN-L22 Android version (Nougat 7.0) ?. Have tried to flash it using fastboot, after that my device is stuck in "your device is booting now" screen, Is it possible?
Click to expand...
Click to collapse
Yes its possible to flash twrp...
What error it gives while you try to flash twrp...
What version. Of twrp you used??
It is possible that it doesn't boot, and... This happens if you flashed the TWRP available on official TWRP site (I remember that, it happened to me also).This is because they've uploaded a version that doesn't work with our device (it's there from months now, i don't understand why it is still there... I have to report that), but no worries; you can solve this easily flashing the OpenKirin version of TWRP that you can grab here https://forum.xda-developers.com/honor-6x/development/twrp-t3583413 flash it via fastboot like you already did with the actual TWRP, and you're ready to go. I tried it on different builds, it always works and i still thank OldDroid's work on it for making TWRP working on Honor 6X.
hassanjavaid8181 said:
Yes its possible to flash twrp...
What error it gives while you try to flash twrp...
What version. Of twrp you used??
Click to expand...
Click to collapse
Thank you so much for responding. It doesn't give me any error while flashing it, going to bootloader using cmd and fastboot flash recovery twrp.img, it shows ok successful but after that i entered fastboot boot twrp.img... it's stuck in your device is booting now. I have used every available twrp in official website.. American and European ones. Nothing worked.
RedSkull23 said:
It is possible that it doesn't boot, and... This happens if you flashed the TWRP available on official TWRP site (I remember that, it happened to me also).This is because they've uploaded a version that doesn't work with our device (it's there from months now, i don't understand why it is still there... I have to report that), but no worries; you can solve this easily flashing the OpenKirin version of TWRP that you can grab here https://forum.xda-developers.com/honor-6x/development/twrp-t3583413 flash it via fastboot like you already did with the actual TWRP, and you're ready to go. I tried it on different builds, it always works and i still thank OldDroid's work on it for making TWRP working on Honor 6X.
Click to expand...
Click to collapse
Thank you so much for responding. Will try and get back to you with the result.
RedSkull23 said:
It is possible that it doesn't boot, and... This happens if you flashed the TWRP available on official TWRP site (I remember that, it happened to me also).This is because they've uploaded a version that doesn't work with our device (it's there from months now, i don't understand why it is still there... I have to report that), but no worries; you can solve this easily flashing the OpenKirin version of TWRP that you can grab here https://forum.xda-developers.com/honor-6x/development/twrp-t3583413 flash it via fastboot like you already did with the actual TWRP, and you're ready to go. I tried it on different builds, it always works and i still thank OldDroid's work on it for making TWRP working on Honor 6X.
Click to expand...
Click to collapse
It worked :laugh: Have been working on this for three days. It's true TWRP which is available officialy is not working. Thank you so much man.
RAHUL3387 said:
It worked :laugh: Have been working on this for three days. It's true TWRP which is available officialy is not working. Thank you so much man.
Click to expand...
Click to collapse
Nothing hard to do dude, the important is that it works now
Hello everyone
I have a Sony Xperia Z3 Dual D6633 running Android 4.4.4 and I would like to install TWRP on it
Does anyone know how to do it?
Bootloader is already unlocked
On the Internet I found this tutorial on several sites and forums
https://forum.xda-developers.com/z3/development/root-stock-kernel-twrp-v01-test-28-09-t2889794?__utma=248941774.950623471.1412017766.1412017766.1412017766.1&__utmb=248941774.1.10.1412017766&__utmc=248941774&__utmx=-&__utmz=248941774.1412017766.1.1.utmcsr=l.facebook.com%7Cutmccn=(referral)%7Cutmcmd=referral%7Cutmcct=/lsr.php&__utmv=-&__utmk=228295838
But this doesn't work for me. It bricks my phone and I have to do a hard reset and restore it from scratch.
(That's evan more frustrating because the links in the post are down and it took me hours to find a website where the files are available)
So is there anyone who has a working solution for installing TWRP on my phone?
Thank you for your answers
I have the same problem. I can't find a detailed tutorial how to bring the latest TWRP on the phone. Would be great if someone could write a dummy-proof tutorial.
I'm on the latest stock ROM (MM), btw.
I might be missing something here, but have you tried the method of downloading a recovery.img and then using "fastboot flash recovery recovery.img"?
https://forum.xda-developers.com/showthread.php?t=2261606
Hello
I wasn't able to work on that problem for the last months. I hope that I have enough time now to find a solution
Samyam25 said:
I might be missing something here, but have you tried the method of downloading a recovery.img and then using "fastboot flash recovery recovery.img"?
Click to expand...
Click to collapse
This cannot work because Sony stock kernel is not able to boot from recovery. TWRP MUST be packed into kernels RAM disk
haverlok said:
https://forum.xda-developers.com/showthread.php?t=2261606
Click to expand...
Click to collapse
Back then when I worked on that problem in June / July I did a lot of research
I found XZDualRecovery and tried. It works but it is only TWRP 2.8. I want to use newer version 3.x.x
Is there a way to change XZ TWRP 2.8 to 3.x.x ??
I also found the rootkernel script by Tobias Waldvogel.
https://forum.xda-developers.com/xperia-z5/development/root-automatic-repack-stock-kernel-dm-t3301605
I'm able to boot into TWRP 3.x.x but there's a huge decryption issue which I can't solve. So TWRP does nothing after boot.
I found a version of TWRP which is compatible with D6633 but I can't boot it from phone.
It boots only by fastboot boot d:\twrp\twrp.img
I'm a beginner on Android rooting / modding and did not find a solution to include working TWRP into XZ nor rootkernel by myself. Any ideas for that??
How can I include TWRP into my kernel??
What if you try fastboot flash boot d:\twr\twrp.img
hello there.
sorry for making a new thread .. ive asked my question multiple times no one answered properly. so here's the situation:
just received the phone from china . i'm on android pie hos. and want to update to ob7 . having root and twrp is it the right way to do it? :
1. update to ob7 using local update and full zip file.
2. unlock the bootloader and flash twrp 70 (or 74 i'm not sure?) using adb
3. flash magisk and twrp installer in twrp recovery
4. done!
i heared its better to use twrp 70 and dont know the reason. whats wrong with the latest version?
Not sure if that will work, but locally upgrading from h2OS to OOS worked on my old op6 when I had it.
If it does not work;
Backup your files first then you need to unlock your bootloader.
Then boot twrp via command prompt. Once booted into twrp. Wipe data and do a factory reset there. Flash twrp installer then reboot into recovery.
Flash OB7, twrp installer and magisk then reboot to recovery again and flash ob7, twrp installer and magisk then reboot to system
I'm using .74
Not sure what the problem is/are.
Regards
Dark Fear said:
hello there.
sorry for making a new thread .. ive asked my question multiple times no one answered properly. so here's the situation:
just received the phone from china . i'm on android pie hos. and want to update to ob7 . having root and twrp is it the right way to do it? :
1. update to ob7 using local update and full zip file.
2. unlock the bootloader and flash twrp 70 (or 74 i'm not sure?) using adb
3. flash magisk and twrp installer in twrp recovery
4. done!
i heared its better to use twrp 70 and dont know the reason. whats wrong with the latest version?
Click to expand...
Click to collapse
It can be done but I wasn't happy with it there were loads of bugs.. Issues slowdowns etc.. I would suggest strictly against it..
theocdguy said:
It can be done but I wasn't happy with it there were loads of bugs.. Issues slowdowns etc.. I would suggest strictly against it..
Click to expand...
Click to collapse
so whats the right way to do it
Dark Fear said:
so whats the right way to do it
Click to expand...
Click to collapse
Which route you want to follow twrp or official? If its official i'd say try the msm tool.. That will put you on oldest pie and then you can do OTA..
Twrp is self explanatory..
theocdguy said:
Which route you want to follow twrp or official? If its official i'd say try the msm tool.. That will put you on oldest pie and then you can do OTA..
Twrp is self explanatory..
Click to expand...
Click to collapse
i'm already on oldest pie.. whats the difference of his method with the one i mentioned?
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??
nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11
walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64
Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.
Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.
Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash