Is it possible to flash twrp in honor 6x BLN-L22 Android version (Nougat 7.0) ?. Have tried to flash it using fastboot, after that my device is stuck in "your device is booting now" screen, Is it possible?
RAHUL3387 said:
Is it possible to flash twrp in honor 6x BLN-L22 Android version (Nougat 7.0) ?. Have tried to flash it using fastboot, after that my device is stuck in "your device is booting now" screen, Is it possible?
Click to expand...
Click to collapse
Yes its possible to flash twrp...
What error it gives while you try to flash twrp...
What version. Of twrp you used??
It is possible that it doesn't boot, and... This happens if you flashed the TWRP available on official TWRP site (I remember that, it happened to me also).This is because they've uploaded a version that doesn't work with our device (it's there from months now, i don't understand why it is still there... I have to report that), but no worries; you can solve this easily flashing the OpenKirin version of TWRP that you can grab here https://forum.xda-developers.com/honor-6x/development/twrp-t3583413 flash it via fastboot like you already did with the actual TWRP, and you're ready to go. I tried it on different builds, it always works and i still thank OldDroid's work on it for making TWRP working on Honor 6X.
hassanjavaid8181 said:
Yes its possible to flash twrp...
What error it gives while you try to flash twrp...
What version. Of twrp you used??
Click to expand...
Click to collapse
Thank you so much for responding. It doesn't give me any error while flashing it, going to bootloader using cmd and fastboot flash recovery twrp.img, it shows ok successful but after that i entered fastboot boot twrp.img... it's stuck in your device is booting now. I have used every available twrp in official website.. American and European ones. Nothing worked.
RedSkull23 said:
It is possible that it doesn't boot, and... This happens if you flashed the TWRP available on official TWRP site (I remember that, it happened to me also).This is because they've uploaded a version that doesn't work with our device (it's there from months now, i don't understand why it is still there... I have to report that), but no worries; you can solve this easily flashing the OpenKirin version of TWRP that you can grab here https://forum.xda-developers.com/honor-6x/development/twrp-t3583413 flash it via fastboot like you already did with the actual TWRP, and you're ready to go. I tried it on different builds, it always works and i still thank OldDroid's work on it for making TWRP working on Honor 6X.
Click to expand...
Click to collapse
Thank you so much for responding. Will try and get back to you with the result.
RedSkull23 said:
It is possible that it doesn't boot, and... This happens if you flashed the TWRP available on official TWRP site (I remember that, it happened to me also).This is because they've uploaded a version that doesn't work with our device (it's there from months now, i don't understand why it is still there... I have to report that), but no worries; you can solve this easily flashing the OpenKirin version of TWRP that you can grab here https://forum.xda-developers.com/honor-6x/development/twrp-t3583413 flash it via fastboot like you already did with the actual TWRP, and you're ready to go. I tried it on different builds, it always works and i still thank OldDroid's work on it for making TWRP working on Honor 6X.
Click to expand...
Click to collapse
It worked :laugh: Have been working on this for three days. It's true TWRP which is available officialy is not working. Thank you so much man.
RAHUL3387 said:
It worked :laugh: Have been working on this for three days. It's true TWRP which is available officialy is not working. Thank you so much man.
Click to expand...
Click to collapse
Nothing hard to do dude, the important is that it works now
Related
Hi,
I've bricked my Honor 8 (no OS installed). Have a TWRP, unlocked bootloader, but when go to fastboot mode there is a text "FRP locked", can't flash by adb&fastboot (command not allowed). Every times I want to update by dload folder instalation is failed. I don't know what to do.
Please help
Have you tried to flash the rollback to Marshmallow package followed by the stock room itself via dload?
Does your TWRP work properly? In case it does, try to flash a custom rom.
deercosta said:
Have you tried to flash the rollback to Marshmallow package followed by the stock room itself via dload?
Does your TWRP work properly? In case it does, try to flash a custom rom.
Click to expand...
Click to collapse
I haven't tried yet, but i've tried flash b101, b360 and b389 firmware (which i have before it bricked). TWRP is working I think, but every try to flash rom is failed. I tried to flash lineage rom, but don't know it is a best choice.
Rommco05 said:
Flash via twrp B360, guide https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445
Click to expand...
Click to collapse
Man, I can't thank you enough. I love you, made my day. Honor is waking up now. Many thanks!! :victory: :victory:
Okay so every time I flash TWRP onto my phone and try to access it. TWRP will not load then my phone will not load as well. Plus my phone says it's a FRD 4 when it should say FRD 14. please help.
Rommco05 said:
Which version twrp you try flash? And which version of Android you have?
Click to expand...
Click to collapse
His problem is cleared , in other thread .
His phone is working fine
REMOVED PROJECT
XDA:DevDB Information
AOSP For The Honor 6x, ROM for the Honor 6X
Contributors
Meticulus
Source Code: https://github.com/Meticulus/android_kernel_huawei_hi6250_4.1
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 5.X
Based On: AOSP
Version Information
Status: Testing
Created 2017-12-03
Last Updated 2018-01-18
Installation Video....
Woaaahhh..
New rom...volte working ??? Thats d only thing i want to work in my phone properly as calling is so important in my career right now
Wow something exciting cooked..5 ROMs in 2 days after so much time that's great indeed.
Hats off to all for this work.
sreekantt said:
Woaaahhh..
New rom...volte working ??? Thats d only thing i want to work in my phone properly as calling is so important in my career right now
Click to expand...
Click to collapse
I am uncertain of this. If you have time, please give this a try and let us know...:highfive:
shashank1320 said:
Wow something exciting cooked..5 ROMs in 2 days after so much time that's great indeed.
Hats off to all for this work.
Click to expand...
Click to collapse
Honestly, I do not own an Honor 6x. The code base was developed for the P9 lite but we discovered that it worked with many other hi6250 devices. We know this ROM works for this device because @felix-development tested it.
Nice work and good rom. Keep Updating
sreekantt said:
Woaaahhh..
New rom...volte working ??? Thats d only thing i want to work in my phone properly as calling is so important in my career right now
Click to expand...
Click to collapse
Great news , ...are you sure about volte ...
HebrArtin said:
Great news , ...are you sure about volte ...
Click to expand...
Click to collapse
He is asking it mate..if VOLTE works, he will flash as he need this feature.
What bugs?
I can't flash it "This package is for hi6250" devices; this is a "berlin"
nice, clean & smooth
algg said:
I can't flash it "This package is for hi6250" devices; this is a "berlin"
Click to expand...
Click to collapse
What TWRP are you using?
Meticulus said:
What TWRP are you using?
Click to expand...
Click to collapse
twrp 3.1.1-0
maybe to add I was on stock emui 4 (marshmallow) when I got the device, since there appearently were no official updates I manually flashed the emui 5 nougat and now tried to flash this.
btw I also read the install instructions on their site but I thought it would screw my device since the recovery is actually made for another device
algg said:
twrp 3.1.1-0
maybe to add I was on stock emui 4 (marshmallow) when I got the device, since there appearently were no official updates I manually flashed the emui 5 nougat and now tried to flash this.
Click to expand...
Click to collapse
Try my TWRP : http://www.meticulus.co.vu/p/twrp-for-huawei-p9-lite.html
I booted into fastboot flashed it like I did the previous twrp.
Then I rebooted while holding power up (this is how twrp started) and got into Huaweis erecovery menu.
Then I booted the actual OS and tried to boot the custom twrp through adb.
It did reboot but again went into the erecovery menu.
Is this a fault on my part or simply incompatible devices? I used the emui 5 twrp since I am on emui 5 but again the stock rom delivered for my device was emui 4.
Am I actually supposed to flash the entire Zip file at once (fastboot flash recovery file.zip) or do I have to manually extract the file and then flash every single file individually?
While flashing the zip fastboot said it was succeful
algg said:
I booted into fastboot flashed it like I did the previous twrp.
Then I rebooted while holding power up (this is how twrp started) and got into Huaweis erecovery menu.
Then I booted the actual OS and tried to boot the custom twrp through adb.
It did reboot but again went into the erecovery menu.
Is this a fault on my part or simply incompatible devices? I used the emui 5 twrp since I am on emui 5 but again the stock rom delivered for my device was emui 4.
Am I actually supposed to flash the entire Zip file at once (fastboot flash recovery file.zip) or do I have to manually extract the file and then flash every single file individually?
While flashing the zip fastboot said it was succeful
Click to expand...
Click to collapse
Oh geez man. You did NOT flash a zip file via fast boot did you? Zip files should never be flashed via fastboot. There are installation instructions @ the link I gave you. Did you see them?
Hey sorry but does this have (LTE - HwC) and does it work on Model : BLL-L21 , because if we don't get oreo i'll totally flash this ROM and thanks
Sorry yea that was my fault. I completely missed that line for some reason.
I flashed the recovery and used it to flash the image. Everything worked and now I rebooted but like all other ROMs I flashed yet (expect the one official emui rom) it gets stuck during the boot animation.
I have waited up to 30 minutes on different roms during the boot animation but literally nothing happens. Is this a fault on my part or can the device be somehow faulty?
Mind me but I am not really expierenced with Android.
It's around 20 mins now and it still is stuck at the "android" boot logo. After a factory reset the stock rom takes around 5 minutes to boot.
CodingAddict704 said:
Hey sorry but does this have (LTE - HwC) and does it work on Model : BLL-L21 , because if we don't get oreo i'll totally flash this ROM and thanks
Click to expand...
Click to collapse
yep , can you please tell if hwc bug has been fixed or not?
Hey everyone,
i usually don't post questions but i've been on pretty much every forum the web has to offer and am still stuck so i'll try my luck here.
i'm currently running lineage 7.1 on my mi4c, i've used another phone for a while but now that my mi4c has a new battery i wanted to start using it again, is also decided this would be the time to update it to android oreo or pie, this however seems to be impossible.
i can only use twrp up to 3.1.1.1, all higher (and unofficial versions) will not boot via fastboot 'dtb not found' or when flashed via older twrp will freeze on boot screen.
whenever i try to install a new rom it tells me 'error code 7', when i remove the 'assert' lines in the update it gives me 'error code 6'
my device is unlocked, i have checked this in fastboot.
do i have to install miui again before installing another rom? do i have to go back to the standard recovery? i'm currently running out of ideas and hope you guys might be able to help me. maybe i'm overlooking something simple.
kind regards,
Monstreys
Hi! I don't know if this is a coincidence or not, but I was about to start a similar thread.
I try to do exactly what you are doing. I want to install LineageOS 16, unofficial ROM.
For this you need a newer TWRP, like 3.2.3.0, but it doesn't work 'dtb not found' like you said. I found out that this doesn't work because you need to have nougat bootloader. Most probably you have lollipop bootloader like I have, and thats why newer versions of TWRP are not working. I think the only way to update your bootloader to a nougat one is to flash the latest MIUI ROM. But, unfortunately, when you do that the bootloader gets locked, and I can't unlock it via MiUnlock due to Error:20091 when I try to link the phone to the Mi account. In MiUnlock it gives me the "this account cannot unlock the phone" or something like that.
Now I removed the "assert" lines from my rom and flashed it without the error 7 or 6. Some error still apears, but it also apears when I flash LineageOS 14.1, and that version is working even with those 2 errors I can't remember during flash.
After I flashed LineageOS, I flashed gapps and then superSU, and now my mi4c is stuck on mi logo for about 20 minutes, and I think it will remain that way.
So, there are 2 things we need to solve. We need to find a way to install latest MIUI without relocking the bootloader because I can't unlock it via MiUnlock, or to find out why after I flashed LineageOS 16 it gets stuck on MI logo.
I think I found the solution. Do exactly what this guy is doing here and it might work.
https://forum.xda-developers.com/showpost.php?p=78640737&postcount=63
I followed that guy instructions and I managed to install TWRP 3.2.3.0 and LineageOS 16, and it booted. Now I am at the setup part but it has very big lag...
makaveli97 said:
I think I found the solution. Do exactly what this guy is doing here and it might work.
https://forum.xda-developers.com/showpost.php?p=78640737&postcount=63
I followed that guy instructions and I managed to install TWRP 3.2.3.0 and LineageOS 16, and it booted. Now I am at the setup part but it has very big lag...
Click to expand...
Click to collapse
i
i was unable to install the patch file, this nonetheless fixed my problem, thanks!!
if above not working, another method to do it based on my method.
https://forum.xda-developers.com/showpost.php?p=81573941&postcount=199
makaveli97 said:
I think I found the solution. Do exactly what this guy is doing here and it might work.
https://forum.xda-developers.com/showpost.php?p=78640737&postcount=63
I followed that guy instructions and I managed to install TWRP 3.2.3.0 and LineageOS 16, and it booted. Now I am at the setup part but it has very big lag...
Click to expand...
Click to collapse
My MI4C has been successfully flushed into lineage-17.1-20200220-UNOFFICIAL-libra.zip. It has been updated on TWRP 3.1.1 and keeps reporting error 7, and then abandoned TWRP3.1.1 and flashed into OrangeFox-R10.0-1-Stable-libra.zip After brushing libra-aqua_firmware_7.2.9.zip on this REC, you can flash lineage-17.1. I do n’t think it will be impossible to refresh because of partition problems. If you only need to upgrade lineage-17.1, you can refer to this method.:good::good:（Translation is not easy to use）
celrau said:
There is a 3.2.x around. If you don't want to bother go in the zip, /META-INF/com/google/android/ and delete the first lines (the ones starting with "assert") from updater-script, save and flash again.
Click to expand...
Click to collapse
rianawirawan said:
Right now, i'm using 3.1.1 -1 btw
It's latest twrp ver from official
Click to expand...
Click to collapse
TWRP-20190418-3.3.0.0-libra.img for the Xiaomi Mi 4c, by GuaiYiHu :
https://androidfilehost.com/?fid=1395089523397945946
Latest firmware for the Xiaomi Mi 4c libra :
https://github.com/XiaomiFirmwareUp...iui_MI4c_V10.1.1.0.NXKCNFI_13b9b312d0_7.0.zip
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Hilzerak said:
Just need to flash root after every OTA.
Click to expand...
Click to collapse
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Hilzerak said:
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Click to expand...
Click to collapse
You should you twrp by
remewer said:
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Click to expand...
Click to collapse
Try to in to recovery mode,if not,you try to flash twrp by mau.....
remewer said:
You could do that without TWRP. You just need to use Magisk's "Install to inactive slot" feature after installing OTA but before rebooting.
Click to expand...
Click to collapse
Thx for the info, helps for future.
But know i rebootet.
soihuvuontrang said:
You should you twrp by
Try to in to recovery mode,if not,you try to flash twrp by mau.....
Click to expand...
Click to collapse
Thx for reply but i dont know what excactly do you try to say me.
"You should you twrp by"? What should i try in recovery mode? And im looking forward for an solution without permanent flash, as i sayn above.
Hilzerak said:
Hey guys,
got a OP6 for years. Stay on Stock OS with root. Never flashed any CustomRom or OS.
Bootet with fastboot boot twrp-version.img and flashed Magisk in twrp.
Works absolut fine until now. I installed the OTA and now i cant enter any twrp.
Information about my device:
Device: OnePlus6 A6003
OSS: 10.3.3
Android: 10
Build-Number: A6003_22_200414
USB-Debuggin: Enabled
OEM-Unlock: active
I tried all .img files from here:
eu.dl.twrp.me/enchilada/
and
twrp-3.2.3-x_blu_spark_v9.91_op.img
twrp-3.2.3-x_blu_spark_v9.86_op.img
No version working.
After flashing the 3.2.x versions i get a screen with
"qualcom crashdum mode
-------------"
With the newer 3.3x versions the screen just switch to "fastboot mode" and stay there forever.
How can i just boot into twrp with the new version? I wont twrp forever (flash). Just need to flash root after every OTA.
Thx for help!
Click to expand...
Click to collapse
The version you tried to boot is not for android 10.
Versions for android 10 are blu_spark 9.108 and 9.109. Unfortunately, i think @eng.stk stopped providing img, but you can download lastest @mauronofrio TWRP and then flash @mauronofrio or blu_spark TWRP
Hilzerak said:
Thx for the info, helps for future.
But know i rebootet.
Thx for reply but i dont know what excactly do you try to say me.
"You should you twrp by"? What should i try in recovery mode? And im looking forward for an solution without permanent flash, as i sayn above.
Click to expand...
Click to collapse
After fashing twrp.img you boot into recovery and flash the file twrp.zip(the same series and name with file twrp.img)then reboot recovery.