Related
Hello everybody,
Firstly, apologies about all text, no links.. But i'm new to the site and don't have enough posts to link yet.
So, i'm new to the Mate 9 (had Samsungs for quite a few years now... Overpriced battery sucking hogs that never last to 18 months withou massive issues) and I really haven't gotten into the custon side of/flashing etc since my original galaxy (dunut, before the s!) /HTC Desire, sgs3 days.... So i'm probably quite out of touch... But still capable to learn and especially follow a good guide!
Now, my thing is... I want to stay stock as I use Android pay quite a lot... Yet with my experience with optus they are ATROCIOUS at updates, every with volume sale items like the Galaxy s4, 5 &6 so I can only imagine that i'll never get an update with the mate 9.
I purchased my phone outright, but second hand.... So I don't think I'll have a warranty anyway.
So far I have gathered that I can only debrand if I unlock the bootloader (and pay remains broken even if it gets relocked with an original rom) so for me, at least for the time being, that's out.
My next option is to side load firmware from the SD card... I just want to keep up to date. There is some screen sensitivity issues that the newest firmware apparently addresses.. Not to mention camera updates and battery usage updates (already VERY impressed with the battery though, especially after my S6- Awful phone)
Trouble is, I can't get any update to complete! - They get to 5% and then fail!
The firmware models I've tried have slightly different numbers to what's on my Optus Mate 9... But I can't find any exact matches, so I'm kind of expecting this to be the cause of my failed updates, even when I've downloaded from the different sites following the guides.
Currently i'm running with this;
Model: MHA-L09
Build: MHA-L09C34B122
EMUI: 5.0
Android: 7.0
and I have tried these three updates from the Huawei... Note 2 full and one OTA. Also note the firmware/region differences... But it's as close as I can find.
2017.04.25 MHA L09BC346B181 FULL-MF
2017.04.25 MHA L09BC346B181 OTA-MF
2017.04.24 MHA L09BC34B170 FULL-MF
I've also followed these two guides (and another one with a B170 update), downloading the updates from each respective site in case the firmware was something different than what I could find. Note also that one tells you to put the dload folder into the device memory.. Which won't work, so I just did it in SD which enables the phone to recognise the update file.
(links not allowed sorry, removed and replaced with text, can probably google to see what I did, always fails on step 1)
From get droid tips, upgrade to B170 & B181
from stechguide, upgrade it B181
Not to mention having followed all the guides I could find on this forum.
I'm sorry if I've missed a discussion that already deals with this (or similar) or if it's really bleedingly obvious. I'm just at a bit of a loss here!
Thanks in advance.
Sorry,
This is for Australian firmware. Optus.
Use this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I don't get why sites write down guides on how to update, when we in fact can't update using DLOAD. Only 2 offline firmwares have been released so far, for C636 and AL00. But that guide up there will let you update to 181.
Thanks for that,
I'd obviously misunderstood what's available already... Figured since I don't have the 10x zoom available like the latest release, I was behind.
ante0 said:
Use this: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
I don't get why sites write down guides on how to update, when we in fact can't update using DLOAD. Only 2 offline firmwares have been released so far, for C636 and AL00. But that guide up there will let you update to 181.
Click to expand...
Click to collapse
Yes, new users are led the wrong way by reading these guides.
The dload method probably worked with older devices so the Mate 9 articles seem to be created by copy and paste and replacing the older devices name with "Mate 9". Voila! There's your new shiny article about the Mate 9 and people klick it.
Yeah. I got sucked in. Noob mistake.
Sorry for polluting the board with my stupidity!
Very out of touch with behind the scenes android.
Thanks for taking the time guys
Since you don't want to unlock your bootloader you are stuck to only one method. And that is the Firmware Finder method and try to push the latest C34B170 FULL-MF to your System Updater and hope it is authenticated. The other link mentioned by ante0 is for unlocked bootloader users only using TWRP and modified recovery images.
Saw that. Figured I'm just stuck as is for now. I'll check out what you're referring to!
Leighm0 said:
Since you don't want to unlock your bootloader you are stuck to only one method. And that is the Firmware Finder method and try to push the latest C34B170 FULL-MF to your System Updater and hope it is authenticated. The other link mentioned by ante0 is for unlocked bootloader users only using TWRP and modified recovery images.
Click to expand...
Click to collapse
New Mate 9 owner here, have been trying to update from MHA-L29C636B172 to MHA-L29C636B180 using the Firmware Finder method and push to OTA.
System update has picked up the new version but every time I try to download and update, it gets to 100% and then tells me I need to update Package 1 which is the same size, it downloads that, tells me I need to update Package 2, same size, downloads that, Package 3 etc, etc in a never ending loop! I’ve tried using both the smaller update package and the full package. I built up an update file of over 5GB trying to do it this way and it never gets to the authentication stage!
Although I’ve always unlocked my bootloader, flashed custom recoveries and roms on my previous Android devices I’m not keen to take that path yet.
In a nutshell, am I doing something wrong or should I just wait for the official authenticated firmware update to pop up on my phone? Thanks.
Texan1 said:
should I just wait for the official authenticated firmware update to pop up on my phone? Thanks.
Click to expand...
Click to collapse
IMHO yes you should. Don't let FF/FH turn into an obsession, just enjoy your phone.
Sent from my MHA-L29 using XDA Labs
Texan1 said:
New Mate 9 owner here, have been trying to update from MHA-L29C636B172 to MHA-L29C636B180 using the Firmware Finder method and push to OTA.
System update has picked up the new version but every time I try to download and update, it gets to 100% and then tells me I need to update Package 1 which is the same size, it downloads that, tells me I need to update Package 2, same size, downloads that, Package 3 etc, etc in a never ending loop! I’ve tried using both the smaller update package and the full package. I built up an update file of over 5GB trying to do it this way and it never gets to the authentication stage!
Although I’ve always unlocked my bootloader, flashed custom recoveries and roms on my previous Android devices I’m not keen to take that path yet.
In a nutshell, am I doing something wrong or should I just wait for the official authenticated firmware update to pop up on my phone? Thanks.
Click to expand...
Click to collapse
Once you start download.. pause it then go turn off the proxy and then go back to the update and resume. Then you won't get the incremental download loop.
By the way, when you unlock bootloader on mate 9, then flash a full firmware (either the update and rebrand guide, Firmware finder or funky) your bootloader gets locked again. So no real harm done.
Leighm0 said:
Once you start download.. pause it then go turn off the proxy and then go back to the update and resume. Then you won't get the incremental download loop.
Click to expand...
Click to collapse
Thanks @Leighm0, but still getting the 'authentication failed' message once downloaded. Is there anything I can do to prevent that and get the update through?
Texan1 said:
Thanks @Leighm0, but still getting the 'authentication failed' message once downloaded. Is there anything I can do to prevent that and get the update through?
Click to expand...
Click to collapse
Nope, thats Huawei not authenticating the update for your device yet... you just have to wait. Took me about 3-4 weeks from the time of release before B182 got approved for my C636 device.
I just randomly check every week till its finally approved - I try not to keep checking as its pointless and a waste of bandwidth.
Leighm0 said:
Nope, thats Huawei not authenticating the update for your device yet... you just have to wait. Took me about 3-4 weeks from the time of release before B182 got approved for my C636 device.
I just randomly check every week till its finally approved - I try not to keep checking as its pointless and a waste of bandwidth.
Click to expand...
Click to collapse
Thanks @Leighm0. Unsure what the point of Firmware Finder and the proxy is then? If it allows you to find the firmware earlier, but you still can’t install it because Huawei need to authenticate it first, why not just check for updates using the built in system updater?
Good question... Wondering that myself.
Sent from my MHA-L09 using XDA Free mobile app
Texan1 said:
Thanks @Leighm0. Unsure what the point of Firmware Finder and the proxy is then? If it allows you to find the firmware earlier, but you still can’t install it because Huawei need to authenticate it first, why not just check for updates using the built in system updater?
Click to expand...
Click to collapse
Nope - I still had to get FF Proxy to push it to system updater.. just needs to be authenticated by Huawei first. OTA did not show up under the standard "check for updates" options.. it might have shown up, but how long do I need to wait for that ? My device is not available in Australia, would it even get OTA updates if it werent for FF proxy?
Next time a firmware comes out, I could do a test to see if it does even get it by normal methods - and that is to push with FF Proxy, wait for the update to be authorized... then cancel it... turn off FF Proxy and wait for it to show up in my system updater naturally.. see how slow Huawei are at pushing it? Be interesting to see.
The above would probably not be relevant to an Australian sold model/device - it should get OTA updates when they are pushed out..
Leighm0 said:
Nope - I still had to get FF Proxy to push it to system updater.. just needs to be authenticated by Huawei first. OTA did not show up under the standard "check for updates" options.. it might have shown up, but how long do I need to wait for that ? My device is not available in Australia, would it even get OTA updates if it werent for FF proxy?
Next time a firmware comes out, I could do a test to see if it does even get it by normal methods - and that is to push with FF Proxy, wait for the update to be authorized... then cancel it... turn off FF Proxy and wait for it to show up in my system updater naturally.. see how slow Huawei are at pushing it? Be interesting to see.
The above would probably not be relevant to an Australian sold model/device - it should get OTA updates when they are pushed out..
Click to expand...
Click to collapse
Ah, ok, well explained mate. So there is a delay between FF and OTA finding the update and then there is a delay as to when Huawei decide to authenticate it.
Are firmware and when Huawei decide to authenticate based on model number? Geographic regions? Mobile carrier?
Mine was purchased via Hong Kong and is the MHA-L29C636 model which I believe is the version JB HiFi sell as well.
Texan1 said:
Ah, ok, well explained mate. So there is a delay between FF and OTA finding the update and then there is a delay as to when Huawei decide to authenticate it.
Are firmware and when Huawei decide to authenticate based on model number? Geographic regions? Mobile carrier?
Mine was purchased via Hong Kong and is the MHA-L29C636 model which I believe is the version JB HiFi sell as well.
Click to expand...
Click to collapse
Not sure how Huawei do their authentication approvals.. but it's not model number.. as someone with same model as mine got theirs authenticated 3-4 weeks before mine did (they were in different country). Could be region and or mobile carrier.. who knows.
Mine was purchased from Thailand and is the LON-L29C636 but is not sold anywhere here in Australia. Correct your model is indeed sold by JB Hi-fi.. so would think you get yours approved same time as those who bought here in AU from JB. But again this could be wrong and they could base authentication on something else... Maybe serial number groupings or who knows?!?!
Leighm0 said:
Not sure how Huawei do their authentication approvals.. but it's not model number.. as someone with same model as mine got theirs authenticated 3-4 weeks before mine did (they were in different country). Could be region and or mobile carrier.. who knows.
Mine was purchased from Thailand and is the LON-L29C636 but is not sold anywhere here in Australia. Correct your model is indeed sold by JB Hi-fi.. so would think you get yours approved same time as those who bought here in AU from JB. But again this could be wrong and they could base authentication on something else... Maybe serial number groupings or who knows?!?!
Click to expand...
Click to collapse
Iirc they go by IMEI.
Noticed Firmware finder showed a security patch for Nougat, dated in June. Since my phone shows
April as the last patch, tried to install it, bombs out....FYI, if you are like me and run a adblocker like ADGUARD
which is basically a VPN....TURN IT OFF FIRST!!!!
So after I did that, updating via proxy, the default system update program on the phone, shows updates
available and started downloading.
My question is, after it gets to 100%, it pops up and says another patch is available, downloads it, and another
patch, download s it and so on. Now I'm up to patch #16....
The entire thing is suppose to be 3.87GB. Instead of downloading the entire file, does it just download it in
chunks of around 284k?
This is a USA branded version of the 9 by the way.
Was gonna update this morning via FF but it says it's not approved using my IMEI (or not) :/
After you see that there is an update (the 200 some mb security one), start downloading, pause, disconnect from proxy and resume. It wont keep downloading updates after that.
However, after installing the update, my security patch still says april. So i guess its a no go.
---------- Post added at 04:32 PM ---------- Previous post was at 04:32 PM ----------
After you see that there is an update (the 200 some mb security one), start downloading, pause, disconnect from proxy and resume. It wont keep downloading updates after that.
However, after installing the update, my security patch still says april. So i guess its a no go.
I switched my wireless, to another one that I had not set up the proxy for. It finished, updated, said it updated, but the file specs still show April security patch. So like you mentioned, apparently it didn't work.
I'll just wait til it hits the official EMUI update app. FF never seems to get it right for the USA variation of the phone.
New firmware but I can't seem to update. Firmware not approved for installation.
mad.nexus said:
New firmware but I can't seem to update. Firmware not approved for installation.
Click to expand...
Click to collapse
Bump ;3
FF has become pretty much useless for me lately. For my Porsche Design Mate 9 it just doesn't detect anything newer than B180, while there were a couple of more recent official firmware updates after that one.
Hi guys! Would just like to seek some assistance regarding my girlfriend's phone. I know that the Oreo update is out for quite some time now, but her phone doesn't seem to be receiving the OTA update.
I've read some other guides instructing to use Firmware Finder(?). But I haven't tried it yet since I haven't seen her phone's build number from my searches.
Please see below:
Model: MHA-L29
Build Number: MHA-L29C185B110
We can find a lot of available firmware in the Firmware Finder app but I'm being extra cautious as I do not have any experience regarding this issue.
Any input or instructions will be greatly appreciated.
I wasnt seeing it either, called huawei support, pretty much useless. tried to do a forced Oreo update via huawei file finder and hisuite, but that bricked my phone. let the battery die down, then i got control of volume keys on boot, that got me to the erecovery, downloaded 7 again, oh well, at least it was going to work, but immediately upon reboot, it said i had an update to Oreo ready! so I did it and it worked. I think if you are rooted in 7, it wont find 8. just some food for thought.
The unit came from Dubai and we haven't done any rooting to it since we do not know how.
Is there any easier workaround for it?
Hadowken said:
The unit came from Dubai and we haven't done any rooting to it since we do not know how.
Is there any easier workaround for it?
Click to expand...
Click to collapse
FF is easiest.
But you need to choose right ROM version.
Check other threads and notice what versions of region C185 were distributed by OTA.
In FF you must choose ROM with FullOTA-MF tag.
There are 186, 187, 188, 189 builds, but I don't know which is actual, cause I have C636 region.
Builds from B321 and higher are on Android 8 (Oreo). Otherwise, I recommend upgrade to last build on Android 7, then start experimenting with Oreo
There is one build B187 with FullOTA-MF-PV tag.
According changelog it created by Huawei to downgrade onto Android 7 from Oreo. But it is still FullOTA, so it is independent one. Thoughts, that it can be used to upgrade from your old build B110 to actual.
P.s. don't forget to turn proxy off before finishing download. It will avoid traffic waste.
P.p.s. Backup your important data first.
FullOTA doesn't clear user data usually, but FullOTA-MF-PV can do it.
Mha-l29c185b187 FullOTA-MF-PV
I saw a youtube video where he clicked the in-app proxy then he went to the WiFi settings to check to proxy. It was set to localhost and 8080.
After backing up important files, should I just go straight to the FF app and download the build? So sorry for the noob questions.
Hadowken said:
I saw a youtube video where he clicked the in-app proxy then he went to the WiFi settings to check to proxy. It was set to localhost and 8080.
After backing up important files, should I just go straight to the FF app and download the build? So sorry for the noob questions.
Click to expand...
Click to collapse
No need to download manually.
FF forces ROM to install via system update. It looks like phone will get notification about new ROM and you simply decide to install. Phone will download ROM and install it.
Okay, so all I have to do is choose the one you specified earlier them I'm all good? Will try it later and revert for any developments. Thank you!
So I tried downloading the build you suggested but after downloading, it failed to install and said the software was not authorized or something.
Are builds only compatible to its corresponding region? I'm from the Philippines, by the way. But the phone originated in the Middle East.
Hadowken said:
So I tried downloading the build you suggested but after downloading, it failed to install and said the software was not authorized or something.
Are builds only compatible to its corresponding region? I'm from the Philippines, by the way. But the phone originated in the Middle East.
Click to expand...
Click to collapse
Ok. Check availability by imei in FF of every FullOTA ROM version 186+
Full OTA MF only? Not Full OTA MF PV?
Got the update finally! I've been checking every day almost
Hello, sorry it took so long. I successfully updated the phone to a new build no. Mha-L29c185B188. But we still couldn't see the oreo update in the updater settings. Please advise next step for an oreo update.
Hadowken said:
Hello, sorry it took so long. I successfully updated the phone to a new build no. Mha-L29c185B188. But we still couldn't see the oreo update in the updater settings. Please advise next step for an oreo update.
Click to expand...
Click to collapse
Hi i live in Lebanon and i have the Middle east variant C185 and i am still on MHA-L29C185B188 since 2 months.
No Oreo update till today. maybe we have to just wait a little more. Normally release of OTA updates is by IMEI and not by region.
michel090428 said:
Hi i live in Lebanon and i have the Middle east variant C185 and i am still on MHA-L29C185B188 since 2 months.
No Oreo update till today. maybe we have to just wait a little more. Normally release of OTA updates is by IMEI and not by region.
Click to expand...
Click to collapse
I have a ME variant C185 as well. So I have been eagerly awaiting Oreo update since long too.
I have recently moved to Australia, as you rightly noted, the phone wouldnt update here too, since Huawei is probably checking region or IMEI or both to allow firmware updates.
Last night, I downloaded FF to check and finally managed to find Oreo update being available. Its currently downloading the 2.67 GB OTA update. But I didnt install it yet.
The version number of the download is 8.0.0.370 (C185).
You can try your luck thru FF, and I hope it works for you as well. Good luck!
I am owning 2 Mate 9 both are L29-C432 and 100% stock......one did not get any OTA since the very beginning, therefore I run all updates through FF (currently 363) while the otherone updated automatically untill 198 but never received any OTA for Oreo. Therefore the 2nd one was updated to Orea through FF as well till 363.
Now.....FF indicates tht 364 is approved for instalation -check "without IMEI" first.....by checking "with IMEI" the second one is approved for instalation while the first one isn't.....how is that possible and any idea how to trigger installation on a stock Mate 9?
Thx for supporting me in getting both on the same FWW level.
All other methods are failing constantly eRecovery, HiCare, etc.
Hi all,
Apologies if this is an obvious question but I am trying to ascertain the upgrade path for my UK unlocked (region 432) Mate 9.
After waiting in vain for months for my phone to get the Oreo update OTA I finally decided to bite the bullet and upgrade it via Firmware Finder to 8.0.0.363 (C432). I would now like to continue applying subsequent upgrades via FF (i.e. those for which my EMEI is authorised) to receive the latest Google security updates plus the recently offered Face Unlock.
My question is...... do I need to sequentially apply all of the Google security patches (e.g. February, March, April, etc.) or can I jump straight to the upgrade that includes May's security patch plus Face Unlock (8.0.0.368)? Are the security patches applied incrementally or would 368 contain everything I need to jump from 363? I would rather upgrade my phone once to get to 368 rather than 3 or 4 times.
Many thanks in anticipation.
Your phone will find and download the latest firmware. You won't need to do multiple firmware installs.
At the moment though FF is playing up. I'm on C368 and waiting for my phone to pick up C369 which is release and authorised according to FF.
Check out this thread....
https://r.tapatalk.com/shareLink?ur...share_tid=3469146&share_fid=3793&share_type=t