Related
So here in Las Vegas there is a Zagg store. Based on everyone's recommendation I decided to get a Zagg InvisiShield for my phone. I picked up 2 or 3 of the demo phones and was like hey this doesn't feel stick or tacky like everyone said it would!
So i look at the prices:
Zagg Full Body Skin $21
Installation $12 includes free Zagg microfiber bag.
So I decided to say OK, Ill let them install it so if they screw something up they can fix it on the spot. The fate of my phone is in their hands. I go to the counter and they tell me come back in 30 minutes.
So i am roaming around the mall, spending money on other crap I don't need. 30 minutes later I go back and pick up my phone. The moment I pick it up i am like WTF! Phone feels like its wrapped in a used condom!
I ask the sales associate why it doesn't feel like the "demo" phone and he goes ohhh that's the wrong one out there. That phone was put out there to show all the scratches on it. I go grab the demo phone and go dude where are the scratches on this thing!! There were none I was FURIOUS!!!!!!!!!!
So needless to say I have this $40+ dollar Zagg POS on my phone and I am really hating it, but I cant bring myself to tear it off and lose my $40. I don't know what to do.
Things I immediately noticed for those of you who want to know what to expect from a Zagg InvisiShield.
1. Tacky Tacky Tacky - Phone feels like it wrapped in a used condom
2. Screen Resolution - This thing KILLS the look of the screen. Looks like a TV wrapped in Saran Wrap
3. Exposed corners - the skin doesn't even cover the corners of the phone. If on an you drop it on a corner edge you will dent the case easily
4. Feel - The edges of each individual piece don't line up properly on the phone, the screen protector is off to one side a little and the other pieces on the skin don't line up. This makes it so the edges of each piece you can really FEEL. It really ruins it.
5. The edges also give the edges of the touch screen a rough edge that you can easily see over the black sections of the digitizer.
I will try and get some photos tonight of everything I am talking about. All in all i am VERY unhappy with the Zagg.
So the question is do I take it off and deal with no protection, or say screw it and leave it on?
As for the way the screen looks and the tackiness, that will change over time. The screen should clear up in a couple days. The tackiness goes away the more you handle the phone... the oils from your hands will change the feel over time and make it very smooth in comparison to what it feels like right now. On my G1, I can honestly say it took a few weeks of normal use and the tackiness was gone... you just have to give this time.
As for the edges and corners... well that's why I would personally go for the BSE skin... they did a much better job of covering the corners properly. If the installation on some of the pieces is out of alignment, I'd take it back and tell them to redo it properly.
There would be no way for them to actually DO that. Looking at the piece you can clearly see some are too small for the areas they are trying to cover.
Ill give the skin a few weeks and see how it feels.
For those of you interested here are some photos from the other thread that explain what I mean PERFECTLY
http://adambuckeridge.com/nexus-one/zagg-nexus-one
Well, as far as the screen protector size... EVERY stick-on protector is short. I'm guessing they all used the same template before the phone came out and are too lazy to change it.
I thought it was supposed to be invisible?
On all my previous phone, 4 so far, i used Invisible Shield, all installed on my own, and had always recommended it frens. So naturally i ordered InvisibleShield before i ordered my N1.
Previously InvisibleShield shipping was fast, this time round Nexus One came first and the shield came nearly 2 weeks after that. I never use the phone till the shield came, since i still had my old phone.
The InvisibleShield was PITA to install, the corners was not covered (as usual), the fit sucks!, Alot of big gaps here and there, i tried installing it 4-5 times, no matter how i tried i was not happy with the fit and quality.
So i return them for a refund, I needed a skin badly so i google around and read on several forums to find a better replacement.
I found BestSkinsEver, read alot of gd reviews on it, but was skeptical since the price was way cheaper then other full body skin out there.
When it arrives, i was abit disappointed. It came in a small envelope, whereas Zagg came with cardboard box with application pad and stuff. So i followed the online instruction on how to install BSE, i was amaze at how easy it was to install!
Other then mixing your own application liquid, the fit was great. I installed it once and it fit perfect!!! Very minimal bubbles, all the corners were covered!!! I did not use the screen protector though, since i prefered matt ones, easier to use Swype with.
Its been more then a month since i used BSE, still looks great. Corners not lifting, no signs of dirt trap on the sides, a prob i use always have with Zagg.
I highly recommend BSE, cheaper, fits great, cover corners, easy to install and also very enviromental friendly shipping package.
ur meant to leave it overnight after applying the skin
jcohenlv said:
So here in Las Vegas there is a Zagg store. Based on everyone's recommendation I decided to get a Zagg InvisiShield for my phone. I picked up 2 or 3 of the demo phones and was like hey this doesn't feel stick or tacky like everyone said it would!
So i look at the prices:
Zagg Full Body Skin $21
Installation $12 includes free Zagg microfiber bag.
So I decided to say OK, Ill let them install it so if they screw something up they can fix it on the spot. The fate of my phone is in their hands. I go to the counter and they tell me come back in 30 minutes.
So i am roaming around the mall, spending money on other crap I don't need. 30 minutes later I go back and pick up my phone. The moment I pick it up i am like WTF! Phone feels like its wrapped in a used condom!
I ask the sales associate why it doesn't feel like the "demo" phone and he goes ohhh that's the wrong one out there. That phone was put out there to show all the scratches on it. I go grab the demo phone and go dude where are the scratches on this thing!! There were none I was FURIOUS!!!!!!!!!!
So needless to say I have this $40+ dollar Zagg POS on my phone and I am really hating it, but I cant bring myself to tear it off and lose my $40. I don't know what to do.
Things I immediately noticed for those of you who want to know what to expect from a Zagg InvisiShield.
1. Tacky Tacky Tacky - Phone feels like it wrapped in a used condom
2. Screen Resolution - This thing KILLS the look of the screen. Looks like a TV wrapped in Saran Wrap
3. Exposed corners - the skin doesn't even cover the corners of the phone. If on an you drop it on a corner edge you will dent the case easily
4. Feel - The edges of each individual piece don't line up properly on the phone, the screen protector is off to one side a little and the other pieces on the skin don't line up. This makes it so the edges of each piece you can really FEEL. It really ruins it.
5. The edges also give the edges of the touch screen a rough edge that you can easily see over the black sections of the digitizer.
I will try and get some photos tonight of everything I am talking about. All in all i am VERY unhappy with the Zagg.
So the question is do I take it off and deal with no protection, or say screw it and leave it on?
Click to expand...
Click to collapse
100% spot on.
I just bought the screen shield part, and it looked like goat crap, and it wass tacky as hell. The fit was poor because it's too floppy to align, the bubbles that are supposed to go away after 24 hours didn't and there were areas around the edges that didn't stay down.
I hated it, ripped it off the phone after the 25th hour and I'll badmouth those crappy shields for the rest of my life, or until I can't remember what a Nexus One was anymore. A warranty of a lifetime replacement of goat poop is worthless to me. It was a complete waste of my time and money.
I ended up buying a Seidio case for it - it's nice and easy to remove. I will look into another brand of screen protector. I don't care if they don't last forever - if it goes a day without looking like crap it's way ahead of a Zagg. I guess when it looks that bad to begin with, you can't really tell when it's degrading too easily.
Bottom line - and I have seen a lot of them since, is that they are ALL tacky, they ALL look like crap and the ALL introduce tons of artifacts to the screen.
Buyer beware - there is no money back on these.
jamesyb0i said:
ur meant to leave it overnight after applying the skin
Click to expand...
Click to collapse
I did. It was still an awful pile of crap on my screen after 24 hours - and I let it sit. It was the first time I didn't have to charge a battery in a while.
rotohammer said:
I thought it was supposed to be invisible?
Click to expand...
Click to collapse
That was a joke, right?
Meh. Zagg makes good products overall... But the FIT on the N1 is absolutely atrocious. I will gladly buy a custom zaggskin if they can get a proper fit... I just emailed them to request information on possible plans to change their design for better corner coverage, or any other options they might be able to offer.
I'm not expecting anything in regards to getting a skin from them... But I'll hope nonetheless. (I would buy BSE, but I'd REALLY love to have a custom design if Zagg can answer my request.)
uansari1 said:
As for the way the screen looks and the tackiness, that will change over time. The screen should clear up in a couple days. The tackiness goes away the more you handle the phone... the oils from your hands will change the feel over time and make it very smooth in comparison to what it feels like right now. On my G1, I can honestly say it took a few weeks of normal use and the tackiness was gone... you just have to give this time.
As for the edges and corners... well that's why I would personally go for the BSE skin... they did a much better job of covering the corners properly. If the installation on some of the pieces is out of alignment, I'd take it back and tell them to redo it properly.
Click to expand...
Click to collapse
Should and does are two different things. I've seen lots of them on iphones, and they all look like crap, all of them with some bubbling under gooey, sticky plastic and no small amount of screen distortion. After I bought mine, I inspected installations of Zagg at Best Buy where I bought it - guess what? There were about a half dozen of them on test phone and they were all tacky. According to the resident geek, most of them were on there for well over a couple of weeks. The tackiness may diminish somewhat over time, but it will never be gone. Anyone who says otherwise is full of it.
I think the reason these are so over-hyped is because people feel like they were fools for spending upwards of $15.00 for a cheap chunk of stamped plastic that performs so poorly, so they promote them instead. What a crock.
I bought one for my Zune 120 and installed the back and didn't bother installing the rest of it. Ended up taking it off the back. I will never buy any more of these "cover all" device covers again.
another thing that that might not be evident right away is that crud sticks to the outer edges of these types of screen protectors i had this on two non touch screen phones and didn't mind it except for the gummy crap that i'd be peeling away from the edges all the time.
attn1 said:
Should and does are two different things. I've seen lots of them on iphones, and they all look like crap, all of them with some bubbling under gooey, sticky plastic and no small amount of screen distortion. After I bought mine, I inspected installations of Zagg at Best Buy where I bought it - guess what? There were about a half dozen of them on test phone and they were all tacky. According to the resident geek, most of them were on there for well over a couple of weeks. The tackiness may diminish somewhat over time, but it will never be gone. Anyone who says otherwise is full of it.
I think the reason these are so over-hyped is because people feel like they were fools for spending upwards of $15.00 for a cheap chunk of stamped plastic that performs so poorly, so they promote them instead. What a crock.
Click to expand...
Click to collapse
Ok, then allow me to clarify. It DOES clear up if you install it properly. I've been using Zagg or Zagg-like products since I had my T-mobile Dash. It's just like installing window tint... if you're completely haphazard with it, it will look like crap. But in all the ones I've applied, they've all LOOKED great, aside from the orange peel effect that's evident on just about all the skin-type products. The best that I have used thus far is Clear Protector. I've had their screen protector on my G1 for almost 9 months and it looks perfect still.
Also, it (and the others) was tacky coming from just the glass screen at first. Over time the CP on the G1 has gotten MUCH smoother and less sticky. I suspect a small amount of this change is really just me getting used to the film and forgetting how smooth the glass is on its own (I remember when I took the last Zagg off my G1 prior to the CP and being surprised at how much more slick it felt), but I have compared it to one of my fresher installs and there's a noticeable difference.
Anyway, my main point is that you're right about the tackiness never completely going away, but wrong about the screen looking like crap after the install has settled. If it still looks like crap after a few days, then the installer screwed up.
uansari1 said:
Anyway, my main point is that you're right about the tackiness never completely going away, but wrong about the screen looking like crap after the install has settled. If it still looks like crap after a few days, then the installer screwed up.
Click to expand...
Click to collapse
Well, it's evident that it's pretty damn easy to screw up, because every installation I have seen looks screwed up. Even if there were no bubbles, the screen look mottled and distorted. And if you look closely enough, there are always bubbles.
As far as my own experience goes, I didn't just "haphazardly" apply it - I followed the directions supplied with it to a T.
That "orange peel effect" you refer to is NOT on all screen protectors - this isn't my first go 'round with screen protectors.
The Zagg product is just a lousy, crappy, overpriced, poorly engineered product, and I don't know how anyone being objective could think otherwise. The fact that a company provides no avenue for refund is very telling about their product. Effectively, there is no satisfaction guarantee - a guaranteed lifetime supply of goat dung isn't satisfaction.
uansari1 said:
you're ... wrong about the screen looking like crap after the install has settled. If it still looks like crap after a few days, then the installer screwed up.
Click to expand...
Click to collapse
Uh, can I point out here that "looks like crap" is completely subjective? You may have been happy with it but I was never very happy with mine. The fact is the thing is not completely "invisible" - the orange peel effect is very noticeable and it's going to be up to each individual user to determine how acceptable that is. I thought it looked like ass, myself.
Frankly, I was just thoroughly unhappy with the Zagg Invisible Shield. The whole-body protector was utter sh*t, with the corners peeling up left and right, and gunk getting under all the corners making them impossible to stick back down (not to mention the large gaps at the corners), and even the screen protector got lint and dust under the edges, bubbling it up. It wouldn't be so bad if it weren't so outrageously expensive and unable to be removed and re-applied.
attn1 said:
Well, it's evident that it's pretty damn easy to screw up, because every installation I have seen looks screwed up. Even if there were no bubbles, the screen look mottled and distorted. And if you look closely enough, there are always bubbles.
As far as my own experience goes, I didn't just "haphazardly" apply it - I followed the directions supplied with it to a T.
That "orange peel effect" you refer to is NOT on all screen protectors - this isn't my first go 'round with screen protectors.
The Zagg product is just a lousy, crappy, overpriced, poorly engineered product, and I don't know how anyone being objective could think otherwise. The fact that a company provides no avenue for refund is very telling about their product. Effectively, there is no satisfaction guarantee - a guaranteed lifetime supply of goat dung isn't satisfaction.
Click to expand...
Click to collapse
While I agree, Zagg isn't the best out there, I can guarantee there are at least a couple that are worse! Anyway, there is enough competition and alternatives to never have to buy either of those brands, including Zagg.
binary visions said:
Uh, can I point out here that "looks like crap" is completely subjective? You may have been happy with it but I was never very happy with mine. The fact is the thing is not completely "invisible" - the orange peel effect is very noticeable and it's going to be up to each individual user to determine how acceptable that is. I thought it looked like ass, myself.
Frankly, I was just thoroughly unhappy with the Zagg Invisible Shield. The whole-body protector was utter sh*t, with the corners peeling up left and right, and gunk getting under all the corners making them impossible to stick back down (not to mention the large gaps at the corners), and even the screen protector got lint and dust under the edges, bubbling it up. It wouldn't be so bad if it weren't so outrageously expensive and unable to be removed and re-applied.
Click to expand...
Click to collapse
I agree with your initial comment... and on a continuum of various subjective outcomes, I'd hardly say Zagg looks like crap. Ghost Armor is the worst I've found....yellowing after only a couple months. I'm sure others are also pretty crappy in comparison since the number of knockoffs is staggering. That being said, there are many products superior to the Zagg as well. Clear Protector, PhantomSkinz, BSE, etc.
I should clarify, contrary to what it seems you guys think, that I was never totally happy with the InvisibleSHIELD. I much preferred the Clear Protector on my G1...and on my N1, I am thoroughly happy with the dcmugen88 static screen protectors. So if I came off as a gung-ho Zagg fan... I'm not. I do think they're overpriced (seriously, $15 for just a screen protector is retarded), and there are better alternatives for less.
The point I was trying to get across, which everyone seems hellbent on disputing is that how good you are at installing makes a difference, sometimes all the difference. I can install at least the screen protector portions of these skin-type products with my eyes closed and the next day you won't even see them on there...I'm sure others can too cuz it's not rocketscience. On the other hand, I'm sure some of you don't have the patience or skill to get it looking that good either... just the way things are. That's all I'm saying. Anyway, if you guys want a great screen protector, I've been saying for over a month to go with dcmugen88... exactly the same as the Seidio product at a fraction of the price...or if you want a skin, get the BSE (Best Skins Ever) product. Paul22000's installation pics are proof positive that it's the best skin for our phones.
Well, I stand corrected. Evidently, there is an avenue for a partial refund. I say partial because the buyer is on the hook for shipping the entire package back to Zagg, and that's not free. You also need to get it done within 45 days and have your original sales receipt.
In the end, you can get SOME money back in exchange for a boatload more effort than it's worth. Still, I'd rather give the post office some money and Zagg zip, zilch, nada - so I'll be enduring the aggravation of the pursuit of a refund on general principle.
Update: After two days, I got an email back from Zagg effectively saying they don't refund items they didn't sell directly. This is not a returnable item from the retailer I bought it from - so I am back to getting even more camel dung for my money - or nothing. I choose nothing and a lesson learned.
attn1 said:
That was a joke, right?
Click to expand...
Click to collapse
Of course, but but someone was bound to say it.
rotohammer said:
Of course, but but someone was bound to say it.
Click to expand...
Click to collapse
Well, you forgot to say "bazinga!"
Ok so its been 4 days ......
Case is still Tacky, not as bad as day 1 but still tacky!
Orange peel effect on the screen has not cleared up!
Dust and gunk are starting to build up on the edges and its been in the micro fiber bag since I bought it..... what a POS.
If you say the orange peel affect is from "poor installation" I will laugh my butt off. This was installed BY A ZAGG REP IN A ZAGG STORE! So don't give me crap about "poor installation"
I have decided to make a compromise on this. I am going to keep the full body and just replace the screen protector portion of it. I cant stand the way it affects the way it makes the screen more difficult to type on. So now I am looking for a good CLEAR screen protector.
Any recommendations?
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
Hi folks got this today for the mrs, just posting my thoughts on it
It's quite a bit more than I've spent on a case before but looking at the other alternatives at the time, decided it was the best of limited options...
I wanted a case I wouldn't have to remove completely every time the phone needed charging and with as much protection as possible (for when thrown in a bag with keys, brushes, coins and anything else imaginable...)
Standard shipment from France to the UK was quick and traceable (2 days dhl) I'd ordered a custom color though so total time was 2nd April to today.
The Case
Packaging & Presentation
It comes in a nice box and drawstring bag, before even seeing the item you feel 'this is a quality product' good marketing by them for sure.
Initial Impressions
Looks a bit jagged on some edges with a definite 'man-made' feel to it, overall it seems like a really good quality case but I do have some concerns detailed below.
In Use
Phone in the case it feels solid and secure, when shut it doesn't feel like it's going to open, discovered a certain push/slide technique to shut with minimum effort.
The 'fold away part' that allows you to fold it away for placing in dock is very secure (a little bit too secure for my liking but maybe with time it will become easier...at the moment i'm noticing sort of 'pressure marks?' on the screen when opening it, there's definitely a technique required to avoid putting too much stress on the phone when undoing this bit.
In The Dock
That is how it should be unfortunately the clasps on the power button side and bottom IMO aren't quite secure enough and missing an extra one (which would cover the headphone port...) so unless you place emphasis on holding the phone *and the case* when putting it in the dock it'll easily end up like this
I had hoped I wouldn't have to make any alterations but I feel it will definitely need some refix/double sided tape as per the simplism? version.
If the phone didn't drop out of the case in the docking procedure sometimes it would've been perfect but being a realist I do understand the complications of creating a case for this dock...
Overall I'm slightly disappointed that it didn't do exactly what I hoped it would, out of the box, but it's certainly well made and feels good in normal use.
Looks like a great product. I'm planning to order the Ivoire colour. Just a few question, how does the leather feels and does it add much thickness to the phone ?
leminhnguyen0703 said:
Looks like a great product. I'm planning to order the Ivoire colour. Just a few question, how does the leather feels and does it add much thickness to the phone ?
Click to expand...
Click to collapse
The leather feels really soft and it does add quite a bit of thickness, it feels slightly padded and gives a little when you touch it, in comparison to a leather case i had for my s2 which was hard with no padding. If i get the same phone when my contract is due for renewal in a few months id be looking for a case of the same sort of quality but to be used with a wireless charger. Im not that impressed with the procedure of docking it in this case but it may become less of a chore as it wears a bit.
I'm not looking to get a dock any time soon so docking isn't a problem to me. Thanks, I'll be ordering one next week
Full disclosure: The guys over at Cruzerlite helped out Carbon when no one had heard of use by donating a few free cases so we could run some giveaways on our social networks. We went to them because we liked their product and the way that they interacted with the Android community. They were so excited about their new skin product that they arranged to ship a MotoX and one of their skins to me so that I might review it and give them, and you, my honest feedback. The device and skins have been since sent back to them. I was not paid or otherwise compensated for this review. Mostly I just wanted to check out a new product, have an excuse to play with a Moto X, and play with the lightbox I built last week.
I hate cases. To me, they've always been a necessary evil. I generally go with the thinnest TPU case I can find so I know my phone will be protected, and try and find one that actually looks cool. Which is why I've always liked the Cruzerlite cases. Very android friendly, and there were always lots of looks to choose from - android themes, art, etc. My favorite was the Tardis case. I was always very careful with my device. But scratches and things happen, and like many of you I never plan to stay with one device for more than a year or so. That means you gotta keep it looking like new so you can sell it later.
To me, that's the niche that the Cruzerlite skins occupy. If you drop your phone all the time this product isn't going to keep you from denting it or smashing the glass. It's vinyl, not TPU. If you're a purist who insist on rocking a totally naked phone, this product also isn't for you. If you're one of the many who hate cases but want to protect the phone in some way, or are confident in your ability to not drop your phone but want a custom look, then this product is where it's at. It'll protect your device from light damage, give you any look you want, and preserve the size and feel of your device.
The product comes in the form of thick vinyl stickers. As it's a brand new product they don't yet have a set of instructions on the site. They tell me they have that in the works and we should see them soon. With that in mind, I'll overshare my installation process and what I learned for you folks. Cruzerlite clearly wanted to make sure that you'd be happy with the installation of this product, so they've given you a single sticker for the back, two sets of stickers for the sides, and three sets for the front. You can screw this up and try again without ordering a new set. Note that I say stickers, but this is actually vinyl of a nice thickness, not some elmo sticker you'd get from the doctor after a checkup.
So having checked out both the vinyl and the Moto X I setup my lightbox and got down to business. I applied the back vinyl, taking great care to align the camera and microphone. It worked, after a fashion - it looked like a sticker slapped on a phone. A phone with a lot of curves. So far... meh. I stuck the sides on as well. It looked... like a bunch of stickers slapped on a phone. They didn't conform to the curves of the phone at all. So I called up Joel at Cruzerlite and told him that while I thought he had a nice idea, this was probable something that would only work on a phone with simple surfaces like an iphone. I showed him how it looked and he asked me when I was planning to finish the installation. Finish the installation? What? Heat. You apply heat after installation. Ohhhhhh. For a guy who was just told that his half-installed product wasn't very good, he was pretty cool about it. Thanks Joel.
Ok, so with that in mind, I dug out the hair dryer and got to heating. It looked a lot better. With a bit of heat and some pressure with my fingers, the vinyl conformed to the curves of the device and started to look like they belonged there. That said, because I installed them like they were stickers, there were gaps. Teal gaps. It didn't look great - but that was on me.
You might want to color match better than I did. Teal and
wood grain aren't known for being a classic combination.
So the first install didn't look so great. The vinyl was curved to match the phone, but I had ugly gaps that ruined the look. When I put the sides on, I aligned things like I would with regular stickers - not heat shrinking vinyl. But Cruzerlite clearly anticipated that, so I had more! Off came the vinyl on the sides and and back to square one. This time, I made sure there was some overlap so that when heat was applied, it would properly fit. Here's what it looked like:
You can already tell it's going to come out better this time. Out comes the hair dryer!
Now we're talking. No gaps, all the buttons are nicely cut out... it looks great. Again, the color combination shows why I'm not ever going to be a graphic designer, but it certainly highlights just how well the product fits the device. There's a slight edge where the vinyl on the sides and the back overlap. It's not unpleasant, but I'd like to play with this product some more to see if I could even avoid that. I've asked Cruzerlite to send me a few more and another phone, and hope to have a follow up on this in the future.
Yes, it has front stickers. The great thing about this product is it's up to you what you apply - if you don't want the front stickers, don't put them on. You could even mix and match them if you wanted. Get different colors and make the phone version of this:
Yes, that's a real thing. It's a Harlequin Golf and comes
that way from the factory. Please don't do this to your phone.
So after installing and playing with this, I like it. The vinyl is thick enough to feel like a high quality and durable product and on the whole I found it to be easier to apply than a screen protector. Sure, it's a bit tricky to align, but you don't have to worry about dust and the use of heat makes this a relatively forgiving product. I'm certain that I didn't do a perfect job with this, but I don't hate it the way you'd hate a screen protector with a bit of dust under it. I did manage to tweak the back a bit when applying it, and you can see the bulge from it. Again, this is something that I'd be able to differently now that I know how the product works so I'm not particularly concerned about it.
Cruzerlite has a whole range of vinyl to choose from too - 57 at the time of this review. There's wood grain, antibacterial colors, metallic, and leather skins. We're spoiled for choice and if you can't find something you like you might want to ask yourself why you're so picky.
I'd say this is a buy. They look great, feel great, and will do a fantastic job of protecting your phone from light damage. They're easy to apply, and at just under ten dollars you can't beat the price. For those of you who picked up a Moto X before Motomaker was a thing, this is a great way to change your phone's look without buying a new one, or get the look of wood without paying an extra hundred bucks for a single woodgrain option. (bamboo? seriously?) At the time of this review, the skins are available for the Moto X, Nexus 5, Note 3, Galaxy S4, and iPhone 5/5s.
I'll update this thread in the future if I can get my hands on another device and more vinyl. If possible I'll try something other than wood grain, too.
You can check out the rest of their skins at http://www.cruzerlite.com/skins
Hi guys, I'm sure you've seen quite a few pictures of those accessories, so I thought I'd post here a few images from very close to some details so you can have a good idea of the finish, etc.
Also a small comparison with an official case (nylon one). I've ordered a skin for it, but it was on preorder and just started shipping today.
Sorry for the lint on some pictures, it does catch it ^^
As for my opinion (one more of those), well the case does feel real good in hand, the phone feels really safe in there. The buttons are real good (miles better than Rhinoshield bumper). Only thing is that the fingerprint scanner is deep and in a small window, so must get a little used to the feeling of really accurately put the finger in there. And is it grippy ? Is fine! a bit better than the official case but not by super much.
Prism is also good, easy to install. Biggest critic is how sharp the edges are (you can see on the pictures). If you don't use a case, you'll feel them and I'd be afraid to lift it by mistake, not sure how securely it sticks. The feeling is like glass, I was using the phone naked previously and no problem with that. Also, it does not affect the screen, I think ; some peops say it makes the screen cloudy, but I do not notice.
Worth the price ? Hmm those things are a rip off no matter what. But they are both good quality products, and the glass screen protector without a black border is a real step up ^^.
There you go!
Thanks for sharing! Would you recommend dropping $$$ on this combo?
silent_freak said:
Thanks for sharing! Would you recommend dropping $$$ on this combo?
Click to expand...
Click to collapse
Well, all in all, it is near 60 USD.
The case is good I think, feels good and will protect the phone that's for sure, so if you don't have anything like that, it is a good buy. I also have an official OP cover and the main difference is that the Dbrand case has raised edges.
The glass, while it is good, is not as ground breaking as I imagined (Dbrand's marketing team is good ^^). The plus is that it feels like glass and does not have a black border, is as fingerprints resistant as the bare glass or the official screen protector. The bad is that the glass as you can see on the pictures is really only on the screen and has sharp corners, so you feel it when doing gestures, unless you use a case (because then your finger does not slide from the farther edge of the phone, if you see what I mean).
So out of the two, I would say the actually real good product is the case.
The case looks too bulky to me. I prefer the slimmer ones like the official protective sandstone or the karbon bumper, which are really well made. But I guess it depends on the environment you're working in (etc) which affects the danger your phoneis in, in which case, if it's a place you can easily damage it, this type of case can save you good money on repairs. The prism looks really durable from what I've seen online and I believe you get 2 in the box if I'm not mistaken, so if that's true, that's a big plus over rhinoshield's overpriced 1x black bordered piece of crap that covers at least 1mm of screen on each side, forcing you to just take it off minutes after installation and breaking it in anger.
Anyway, thanks for giving us a look at dbrand's new products. Was really looking forward to seeing someone talk about that.
dragos281993 said:
The case looks too bulky to me. I prefer the slimmer ones like the [...] Was really looking forward to seeing someone talk about that.
Click to expand...
Click to collapse
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
kipue said:
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
Click to expand...
Click to collapse
I dropped my OP6 from approximately 2.5meters from the locomotive's door and the phone miraculously survived with the karbon case having one nick in the top right side corner and surprisingly that disappeared after a few days. Very impressive quality. I was also very lucky, I guess, considering the height the phone fell from. THEN I got the bumper case from Rhinoshield along with the garbage black bordered glass. I broke the glass in half after basically donating money to them because that glass was not worth the price, but that was that. I put their bumper on my phone and left it there for a few days. ****ty buttons, poor quality material and slippery too, like a hard plastic you find in those kitchen accessories, but whatever, I liked the alert slider one. Then one day I got in my car and the phone fell from my pocket on concrete (or asphalt) and because it happened right at the edge of the road, one hard little rock managed to touch the edge of the screen at impact and cracked the screen on the middle right side with the crack starting from the bottom and ending in a "C" shape 2 or 3 centimeters above. So it's still ok but the start of the crack can be felt at touch so that's a bummer.
And in the end I could've given the money to the old lady beggar at the corner of the street instead of giving it to Rhinoshield for 2 absolutely rubbish products they made such a big fuss about.
Never again I'll buy from them. Dbrand's products seem a bit different though especially that prism. I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
dragos281993 said:
I dropped my OP6 from approximately [...] . I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
Click to expand...
Click to collapse
Yeah, as usual those things are very often quite a leap of faith. We want to believe that the more expensive it is the better it will be but the truth is that it's probably the same or close to the same with a different packaging :angel:
But need a screen protector at least to maintain the resell value of the devices.
I'll say again, prism is a good one but not perfect (like none of them is).
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
ahagersr said:
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
Click to expand...
Click to collapse
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in there so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out of their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
kipue said:
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in the so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out if their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
Click to expand...
Click to collapse
Thank you very much for your time!
ahagersr said:
Thank you very much for your time!
Click to expand...
Click to collapse
Sure, no problem.
So here are a few more. The last one is to show how the phone screen does not touch a flat surface when it is put face down. It's blurry but you'll get the idea.
Also some lint, not fighting that anymore