I like to wear my headset with my Nexus 5X in the pocket and walk around. Unfortunately, the cord got stuck on the kitchen drawer and came out. Now, the headphone only works if I push it and hold it continuously pushed to the left. I tried to put a paper clip in there to straighten things out, but no luck. I've tried other headphones and have the same problem.
Any suggestions? Should I just replace the headphone jack?
Thanks!
sounds like the headphone jack got damaged when the cord got pulled out and possibly made worst when you tried to correct it with the paperclip, I'd suggest reading a guide on ifixit for the repair process.
The headphone jack is pretty easy to replace and can be purchased from ebay. No need to remove the battery, just the back cover, motherboard cover, and motherboard: https://www.ifixit.com/Guide/Nexus+5+Headphone+Jack+Replacement/73195
Working again
Thanks for the tips.
One mistake - I actually have a Nexus 5X phone, but it is very similar.
I used the following guides:
https://www.ifixit.com/Guide/Nexus+5+Headphone+Jack+Replacement/73195
https://www.ifixit.com/Teardown/Nexus+5X+Teardown/51318
The headphone jack port on the Nexus 5X is actually very easy to replace. It is just pressure fit into place.
I forgot how snug the fit of a headphone jack is into the port though! I think it loosens over time.
But the main thing, it's working again!
glad to hear it, and at least you know what to do the next time this happens
Related
hey guys about a week ago all the sudden the speakers seem to have went on my device. I recently changed roms and i still cant hear anything. I first noticed when I slept in this week because the alarm was going off but no audio LOL
anyone have any tips or experience with this issue? I have a feeling its hardware but if any sort of firmware upgrade or anything will fix it id love to know!
if it is hardware related...anyone have a guide on how to crack this beast open and check the audio wiring out?
There is a Service Manual for this phone floating around.
Cracking open the case is easy. I just did so to fix the antenna contacts. Unfortunately I broke my speaker cables when reassembling it, so i will need to do this again when my replacement speaker comes in.
Take off the back battery cover and you will see four screws. Using a very small philips screwdriver, remove the four screws, then with a flat plastic probe (or your nails if they are long enough) separate the back case cover from the keyboard, starting from one side, around the top , then the other side. Leave the bottom for last as that has the USB connector holding it together. The speaker is attached to the back case cover near the top, and has a very short cable connecting it to the circuit board. Careful not to pull the back case off too hard or you can snap these thin cables.
Hey all,
I been looking around for a similar thread, but all of them involve this issue. My issue is that my Jack will not play the right side of Stereo.. At all. I've tried my Gaming Headset, and 5 Diff headphones, its clearly the jack. Thing is I've never dropped the phone, and been really careful with it in general. The Port does not feel loose at all and no matter how much i Twist the plug trying to catch a signal it does not pick up anything. I Also tried cleaning the inside with a shaved down Q-Tip, needless to say it didn't do anything.
Any Ideas?
I have no Warranty
The last time I tried cleaning a headphone jack, I accidentally bent one of the contacts inside the barrel back flush with the wall. That meant one of the contact pins wasn't doing its job.
Take the outer housing off and closely inspect the jack. Shine a torch dow it to make sure all your pins are showing. A surgical needle saved me (great addition to the phone repair kit) You can use it to bend the pin back into position.
Good luck!
Sry for Nekro, just wanted to add a Follow up to the problem. My phone had been recently stolen, when I was hanging out with a not so great crowd, But I just got it back yesterday. And to my astonishment, the headphones started to work if I pushed the jack in further. Turns out it was just Pocket lint.... They musta knocked the pocket lint loose enough for me to grab a weak connection. Just rolled up some Tape and stuck it in and got the Lint out, works perfectly now. Hopefully this will help someone else searching this problem.
Now to just figure out why my Pause/Play , Forward /Backward buttons on both my Headphones don't work anymore....
Thanks a lot Zeal514....I had no sound a all and headphone pin was not going all the way in...swirled some rolled tape in and whole lotta lint crap came out and I can hear now...feels great. Thanks for your post saved me call to HTC helpdesk and time to send phone in.
But my mic is not working...i have old apple earbuds aith no buttons, just a mic attached with earbuds.
Thanks for the tip, I used some 3M Scotch compressed air and after blowing the dirt out of the jack plug, all was good again!
So I picked up a MT4GS off eBay to replace a MT3GS. The phone had a busted digitizer, which I was able to replace easily. But now I'm also finding that the earpiece speaker doesn't work either.
Has anyone had a speaker fail? How hard was it to fix?
I haven't had a speaker fail, but if it is like most phone speakers it's pretty easy to replace... (well as long as you have the phone already taken apart...). They usually aren't even soldered onto the phone they are just a speaker with 2 gold springs or plates that make contact with 2 solder pads on the motherboard. So if it actually is a blown speaker than you should just be able to buy one and switch it out. But you may just want to clean the pads. I haven't taken apart a MT4GS so I'm not completely sure if that is how the speaker is set up but it's like that on most phones...
The headphone jack is beginning to fail from constant use (after nearly 4 years) on my Tab 2 7", has anyone ever replaced the jack? I found an ifixit guide for the 10.1", I would assume it's a similar procedure?
Should be similar. Maybe you can take a look at some parts here https://youtu.be/2ebMuSWSsW8 (battery replacement)
Android-Andi said:
Should be similar. Maybe you can take a look at some parts here https://youtu.be/2ebMuSWSsW8 (battery replacement)
Click to expand...
Click to collapse
thanks for that, it ended up leading me to this video https://youtu.be/v5PgwtG-1TI in which he actually removes the headphone jack while working toward replacing the broken digitizer.
Repair complete.
If you follow that video I linked above you can leave the screws in place for the speakers and just disconnect ALL the ribbon cables, then remove the motherboard and remove the 2 beige pieces at the top then the headphone microphone unit can be removed, honestly hardest part of the repair was removing the back cover, got the parts and tools from Ifixit (ordered a prokit tool kit and the headphone port) ordered about 3 am saturday morning arrived at 10 AM this morning (monday). The motherboard needs to come out so the 2 beige pieces can come out, which needs to happen to pull out the headphone port.
So I've been keeping my S8 Plus as my backup to my Note 8 since the weekend the N8 came out. My kid sister dropped her iPhone and pretty much killed it so I lent her my S8 Plus until she got a new phone. Well, she only went and broke up the tip of an aux plug inside the headphone jack. It seems the aux cord was pretty old or just compromised somehow. She was in her car when she pulled the aux out of the phone but noticed the tip was stuck inside the phone. Lovely.
In the mean time, I've lent her my USB-C to Aux adapter until I can get the tip out of the headphone jack. I'm averse to using any kind of glue because I don't want to risk leaving any sticky residue inside (hold laughter). I have a smartphone repair kit with some very thin tweezers but they couldn't get a firm grip on the aux bit.
Have y'all seen this kind of issue firsthand and if so do you have any tips to getting this thing out? Thanks!
First check to see of the plug shaft that was broken, is attracted to a magnet.
If so, my first thought would be to take a nail the same diameter, or just slightly more thin as the plug shaft, cut the end off square to the nail shaft, or grind it off. Get a reasonably strong magnet. Insert the nail shaft into the headphone jack hole, and gently put it up against the broken off piece. Place the strong magnet on the nail shaft. Slowly and gently pull and twist as you remove the nail.
roaduardo said:
So I've been keeping my S8 Plus as my backup to my Note 8 since the weekend the N8 came out. My kid sister dropped her iPhone and pretty much killed it so I lent her my S8 Plus until she got a new phone. Well, she only went and broke up the tip of an aux plug inside the headphone jack. It seems the aux cord was pretty old or just compromised somehow. She was in her car when she pulled the aux out of the phone but noticed the tip was stuck inside the phone. Lovely.
In the mean time, I've lent her my USB-C to Aux adapter until I can get the tip out of the headphone jack. I'm averse to using any kind of glue because I don't want to risk leaving any sticky residue inside (hold laughter). I have a smartphone repair kit with some very thin tweezers but they couldn't get a firm grip on the aux bit.
Have y'all seen this kind of issue firsthand and if so do you have any tips to getting this thing out? Thanks!
Click to expand...
Click to collapse
What you need is super glue I know you said no glue but this is how I fixed my iPad when this happened and a cotton bud or que tip
You cut the cotton wool off the cotton bud so you are left with the hollow tube then apply a small ammount of super glue on the tip of the tube and I mean tiny amount and then put that in your headphone jack and let it set for 10-15 mins then you should be able to remove the aux tip by pulling the cotton bud out and if you done this correctly there should be no glue left inside the headphone port
---------- Post added at 11:41 PM ---------- Previous post was at 11:38 PM ----------
downloaderbyproxy93 said:
What you need is super glue I know you said no glue but this is how I fixed my iPad when this happened and a cotton bud or que tip
You cut the cotton wool off the cotton bud so you are left with the hollow tube then apply a small ammount of super glue on the tip of the tube and I mean tiny amount and then put that in your headphone jack and let it set for 10-15 mins then you should be able to remove the aux tip by pulling the cotton bud out and if you done this correctly there should be no glue left inside the headphone port
Click to expand...
Click to collapse
Edit here is a link for a laptop but it is the same principle https://www.google.co.uk/url?sa=t&s...QQwqsBCCgwAA&usg=AOvVaw0VTJzWxrN8ZFOD4xbU2nov
Hmm... In my experience super glue typically requires 24 hours to fully cure, right? I think I've heard of applicators you can spray on to speed it up but that's just more liquid being used around this phone which makes me uneasy.
I would second a drop of super glue one a tooth pick then with a light make sure it's centered. That little bit of glue will dry in a matter of 30 min to a hour.
roaduardo said:
Hmm... In my experience super glue typically requires 24 hours to fully cure, right? I think I've heard of applicators you can spray on to speed it up but that's just more liquid being used around this phone which makes me uneasy.
Click to expand...
Click to collapse
That's how I done it when I done this method when I broke the aux bit in my iPad and now it works fine
I sliced a straw from a juice box and put it around the outside of the broken aux plug then I hollowed out the inside of a pen and put a tiny dan of the gel style gorilla glue on the inside of the pen. slide it down inside the straw and wait for it to harden 5 min pull the whole thing out worked great
Sent from my [device_name] using XDA-Developers Legacy app