To gather options here for U12+ glass/plastic screen and back protectors.
Currently I have this one ordered for back film:
https://www.aliexpress.com/item/Fro...r-For-HTC-U12-Plus-U12-Cover/32881487671.html
And this for the front:
https://www.ebay.com/itm/HTC-U12-Pl...-Schutzglas-Tempered-Schutzfolie/263708198830
It will be much relief to have these applied. Need to handle the phone with care till at least the front glass arrives...
I'm trying these out because they're the only non-glass, dry install protectors I could find.
https://www.amazon.com/gp/product/B07C8HP8FM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
So the front tgsp is here. I can't recommend it because it's not well sized on top and bottom. No Halo, because this u12 panel is less curved than u11 was, it's flat.
It's all transparent and fully glued. Application was easy cause it didn't fit an exact match on top.
Usual glass feeling to it.
I'll keep it because it's without Halo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How about Skinomi?
It's an off brand, but was the only one I found when I had a HTC 10. It was pretty great quality all body protection. Bestskinsever is normally my go to, but since they sometimes done have any skins Skinomi has been my second
All glass screen protector should work since the screen is flat. I ordered from Mr. Shield since I used for my Android Pad.
Sent from my BKL-L04 using Tapatalk
I found this screen protector on amazon:
https://www.amazon.de/dp/B07CRVB2VC...olid=2BBLC2HN0SPDW&psc=0&ref_=lv_ov_lig_dp_it
It says: Especially for curved displays
What do u think of this screen protector?
x1tymez said:
All glass screen protector should work since the screen is flat. I ordered from Mr. Shield since I used for my Android Pad.
Sent from my BKL-L04 using Tapatalk
Click to expand...
Click to collapse
Thats the one I ordered and its fits fine.
Defective Dave said:
Thats the one I ordered and its fits fine.
Click to expand...
Click to collapse
I ordered different brand. Mr. Shield, the side is little smaller and for some reason the bottom don't stick. Not deal breaker, but nice to others.
Sent from my HTC U12+ using Tapatalk
This looks great! But it's pretty expensive with shippingcosts to the Netherlands.
Sent from my HTC U12+ using XDA Labs
PhantomSkinz Guru said:
Hi all,
If any of you would like to give our Ultra Clear screen protectors or full body skinz a try, we would be happy to send out a few review units since this device is new. Our Ultra Clear film is 100% designed and made in the USA, is self-healing, and comes with our Lifetime Warranty. We have a matte finish version available as well. You can see a sample video below of our Ultra Clear skin on the back of an iPhone 8 and an Apple Watch screen.
Qualifications for a free review unit:
1) Must live in the USA
2) Must have at least 100, but preferably 500+ post count to reward long-time, contributing members of the forum
We would make an exception to #1 above for @tbalden due to the insanely high post count and number of "thanks"
DM us if you are interested. Here are the available options for the U12+ https://phantomskinz.com/htc-u12-plus/. Ultra Clear is perfect for anyone with the Translucent Blue color which looks is pretty awesome phone in our opinion.
Click to expand...
Click to collapse
hey I have even more posts, but not as much thanks like he does but also not living in the USA
DeeZZ_NuuZZ said:
hey I have even more posts, but not as much thanks like he does but also not living in the USA
Click to expand...
Click to collapse
Also I already got mine slapped up with a cheapo from China, and don't want to risk another nervous break down while applying a new film or skin
PhantomSkinz Guru said:
Yes shipping a package internationally with tracking is quite expensive. It actually costs us even more than what we charge our customers because we choose to insure our international shipments. That being said, we do offer free international shipping on orders $69.95 and up. I know that is a lot, but if you put together an order with a few friends or family members, that would save you quite a bit on the shipping costs.
We used to send shipments as letters as some of our competitors do which is much cheaper, but that isn't really possible when including application gel and the percentage of lost shipments was MUCH higher in that scenario. We feel that it is more important that customers can track their orders and that a much closer to 100% of our orders are actually delivered.
Click to expand...
Click to collapse
Thanks for your reply. Okay, I've just placed an order for 3 HTC u12+ skins, because Dbrand doesn't make them haha. And because I got 10% off and get free shipping.
Hope to have them soon!
PhantomSkinz Guru said:
Hi all,
If any of you would like to give our Ultra Clear screen protectors or full body skinz a try, we would be happy to send out a few review units since this device is new. Our Ultra Clear film is 100% designed and made in the USA, is self-healing, and comes with our Lifetime Warranty. We have a matte finish version available as well. You can see a sample video below of our Ultra Clear skin on the back of an iPhone 8 and an Apple Watch screen.
Qualifications for a free review unit:
1) Must live in the USA
2) Must have at least 100, but preferably 500+ post count to reward long-time, contributing members of the forum
We would make an exception to #1 above for @tbalden due to the insanely high post count and number of "thanks"
DM us if you are interested. Here are the available options for the U12+ https://phantomskinz.com/htc-u12-plus/. Ultra Clear is perfect for anyone with the Translucent Blue color which looks is pretty awesome phone in our opinion.
Click to expand...
Click to collapse
I wasn't able to send a PM for some reason but I would love to try the ultra clean full body since I'm using a fitbag for my only protection now. I can't find any cases I'm interested in yet. I will make sure to give a full review. Thank you for the offer.
When I had my U11 protected with full body protector it would no longer fit properly in my U11 leather fitbag, since the fitbag is made perfectly for a naked phone but the U12+ is a tad smaller than the U11. The U12+ fits nicely in my U11 fitbag but it doesn't fit as snug as a bare naked U11. A bare naked U11 fit perfectly in the fitbag and whenever you slide it out, it would clean both front and back of the phone making it look great.
My point is, I would bet the @PhantomSkinz Guru for the U12+ would combine very nice with the U11 leather fitbag. I bet it would snug it up just perfect like it does for my U11.
PhantomSkinz Guru said:
Hi all,
If any of you would like to give our Ultra Clear screen protectors or full body skinz a try, we would be happy to send out a few review units since this device is new. Our Ultra Clear film is 100% designed and made in the USA, is self-healing, and comes with our Lifetime Warranty. We have a matte finish version available as well. You can see a sample video below of our Ultra Clear skin on the back of an iPhone 8 and an Apple Watch screen.
Qualifications for a free review unit:
1) Must live in the USA
2) Must have at least 100, but preferably 500+ post count to reward long-time, contributing members of the forum
We would make an exception to #1 above for @tbalden due to the insanely high post count and number of "thanks"
DM us if you are interested. Here are the available options for the U12+ https://phantomskinz.com/htc-u12-plus/. Ultra Clear is perfect for anyone with the Translucent Blue color which looks is pretty awesome phone in our opinion.
Click to expand...
Click to collapse
Shame I don't quite meet the criteria in the UK with only <400 posts.
I've tried this:
https://smile.amazon.com/gp/product/B07BXFR12Z/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and this:
https://smile.amazon.com/gp/product/B07D2BYYJN/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Both are garbage because neither completely covers the screen (each side is slightly thinner than the width of the screen) and BOTH will not stick down on 2 or 3 of the edges.
I have this:
https://smile.amazon.com/gp/product/B07CKMBJ98/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
and this:
https://smile.amazon.com/gp/product/B07CPQ3XJM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
coming tomorrow. I'm leery of Orzero due to the negative reviews of their product for another flat-screened, bezeless phone, the Essential PH-1 but I bought it because it specifically states that the entire protector has adhesive, not just the black edges. If neither of these work, I'm going Skinomi.
PhantomSkinz Guru said:
Yes the Ultra Clear skinz are about 8 mils (0.2mm) thick. So you can double that thickness to account for each side being covered. It will definitely make the fit a little more snug. However sliding it in and out of a tight fitting pouch many times a day may cause the skin to peel up? Suppose it depends how tight the fit bag is.
We'll PM you for your shipping details for the review kit
Click to expand...
Click to collapse
Yes thank you very much I'm really looking forward to applying these. I bet they will work great with my FitBag and if they do peel up it will probably get enough use before doing so and still be worth it to order new. We will see and I will post pics and thoughts. Thanks again!
holz75 said:
I'm trying these out because they're the only non-glass, dry install protectors I could find.
https://www.amazon.com/gp/product/B07C8HP8FM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Those were terrible, but these Supershieldz are great, especially if you prefer film over glass.
https://www.amazon.com/gp/product/B07DT497ZQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
PhantomSkinz Guru said:
No problem We are going to send you a "glass only" back skin as well so you can choose which you like better. The glass only will certainly be easier to install and may be less prone to peeling in your situation.
Click to expand...
Click to collapse
Awesome thank you.
My HTC U11 Fitbag only fit properly bare naked. Once I put a screen protector and back protector on it, it was too tight. The U12+ fits nicely in my U11 Fitbag but it's not tight enough, I think applying these will make the U11 Fitbag fit the U12+ as if it was made for it.
If it doesn't work out I will stop using the FitBag. I just want a bare looking phone with these great protector's. I would hate to get a single scratch on this beauty :laugh:
OGhoul said:
I've tried this:
https://smile.amazon.com/gp/product/B07BXFR12Z/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and this:
https://smile.amazon.com/gp/product/B07D2BYYJN/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Both are garbage because neither completely covers the screen (each side is slightly thinner than the width of the screen) and BOTH will not stick down on 2 or 3 of the edges.
I have this:
https://smile.amazon.com/gp/product/B07CKMBJ98/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
and this:
https://smile.amazon.com/gp/product/B07CPQ3XJM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
coming tomorrow. I'm leery of Orzero due to the negative reviews of their product for another flat-screened, bezeless phone, the Essential PH-1 but I bought it because it specifically states that the entire protector has adhesive, not just the black edges. If neither of these work, I'm going Skinomi.
Click to expand...
Click to collapse
So here's the sad state of affairs for tempered glass screen protectors for the U12 Plus. Do you want to protect just the screen, or the entire phone?
Because you can't do both.
You can use a glass screen protector, but you'll have to either deal with the screen protector not actually covering your screen, or you can get a 'case friendly' full coverage screen protector that is, infact, not case friendly.
Or you can use a case and a plastic screen protector, as I am going to do. The fact of the matter is until a name brand company decides to make a glass screen protector that actually fits and adheres to the U12 Plus, none of these cheap chinese glass screen protectors are worth a dime of your money. It cost me $40+ to figure that out.
The Orzero screen protector completely covered the flat glass surface of the front of the phone, however you can't get rid of the airgaps where the black part gives way to the clear glass. Then, when you put the case on, it immediately lifts the screen protector.
The Katain had more rounded corners so I was hopeful, but again, immediate lift and I have a bubble at the edge of the clear and black that will not go away.
Related
Please take / post pictures if you've tried some of the other brands!
In order of poll popularity thus far (as of May 7th):
Zagg Invisible Shield ($24.99)
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://forum.xda-developers.com/showpost.php?p=5941560&postcount=174 (by validis)
Best Skins Ever ($8.00)
http://www.bestskinsever.com/google-nexus-one-skin-285
http://forum.xda-developers.com/showpost.php?p=5502896&postcount=94 (My pictures!)
More Pictures:
http://forum.xda-developers.com/showpost.php?p=5486242&postcount=88 (by xxlikquidxx)
http://forum.xda-developers.com/showpost.php?p=5502896&postcount=94 (by Paul22000)
http://forum.xda-developers.com/showpost.php?p=5510015&postcount=99 (by Paul22000)
http://forum.xda-developers.com/showpost.php?p=6061257&postcount=183 (by validis)
http://forum.xda-developers.com/showpost.php?p=6081332&postcount=193 (by DarkDvr)
Phantom Skinz ($24.95)
http://phantomskinz.com/htcgooglenexusone.aspx
BodyGuardz ($24.95)
http://www.bodyguardz.com/content/accessories/1-32--2548.htm
Skinomi ($19.95)
http://www.skinomi.com/google-nexus-one-skin-protector.html
Ghost Armor ($24.99)
http://www.ghost-armor.com/google/nexusone-mobile-phone/prod_316.html
I'd look for a wrapped bottom, if you have a habit of tucking your phone into your pockets. If there are separate pieces it would start peeling in no time.
I used a skin from bestskinsever on one of my BB Curves. It lasted quite well and really protected it - just like the ones form ZAGG, but at a much cheaper price. They use essentially the same material, but they send it to you in a plain envelope rather than a custom created box with all sorts of graphics and a bottle of application liquid. Instead you download instructions from the bestskinsever web site which tell you how to make your own liquid from dish soap and water.
When I tried a ZAGG shield I found that the bottle of liquid didn't work all that well and there wasn't nearly enough anyway. For the money, I'd get a bestskinsever skin over a ZAGG, make my own liquid and use a credit card to apply it. Also, the one time I ordered from ZAGG they sent me the wrong skin and then required me to send back the wrong skin in order to get the right one - not a great CS experience given how much profit margin they have on these, they could have just sent the right product to keep a customer happy but they didn't feel the need...
flarbear said:
I used a skin from bestskinsever on one of my BB Curves. It lasted quite well and really protected it - just like the ones form ZAGG, but at a much cheaper price. They use essentially the same material, but they send it to you in a plain envelope rather than a custom created box with all sorts of graphics and a bottle of application liquid. Instead you download instructions from the bestskinsever web site which tell you how to make your own liquid from dish soap and water.
When I tried a ZAGG shield I found that the bottle of liquid didn't work all that well and there wasn't nearly enough anyway. For the money, I'd get a bestskinsever skin over a ZAGG, make my own liquid and use a credit card to apply it. Also, the one time I ordered from ZAGG they sent me the wrong skin and then required me to send back the wrong skin in order to get the right one - not a great CS experience given how much profit margin they have on these, they could have just sent the right product to keep a customer happy but they didn't feel the need...
Click to expand...
Click to collapse
Interesting. I'm a bit wary of the low price, just since it's SO MUCH lower than the other 5. It makes me think that the quality isn't as good as the others, perhaps in strength of material or length of life.
I did get a chance to email Ghost Armor and here's what they said:
Dear Paul,
You actually get charged the price of the screen but receive the Full Body.
I now see that it says:
Motorola Droid Launch Special: Receive the Full Body Droid Kit for the
Price of the Screen! Save $10.00!
I don't know why it says "Motorola Droid" and not Google Nexus... but the
rest is true. You purchase the Nexus kit for the price of the screen right
now, that's all. Its a special that we have going on.
Regards,
Ghost Armor Customer Service
Speedy reply, and good deal going on.
Now I'm thinking PhantomSkinz vs Ghost Armor since they're discounting prices at $18 (at Amazon) and $15, respectively, for a full body kit.
Added a poll!
If possible, I'd love to hear comments on why you picked the one you did (look, feel, price, customer service, etc)
I just ordered a phantom skinz
its only $16 for two... as they have a coupon right now, winter33
Clear Protector
I just purchased and installed a CLEAR PROTECTOR screen protector. I purchased it on Ebay for $9.95. I previously installed a Zagg Invisible Shield on my MyTouch 3G and it's basically the same material. What I don't like about those "Military Grade", "Helicopter Blade" materials, is that they all feel sticky when you slide your finger over them. It doesn't feel smooth at all. That makes it difficult to use the touch screen. The screen protector included with the MyTouch was great. Does anyone know where I can find one of those for the Nexus 1? Ohh, and do any of those screen protectors protect the camera? It seems like they all have cut outs, but no protection.
Remember... The PhantomSkinz offer right now is for ** 2 ** full setups. And right now you get both for $15 bucks.
I just installed the whole body protection on my N1. I think it came out nice. I took my time and used a hair dryer. I want to let it sit for the next 24 hours before "fondling" it too much.
I have used both BSE and Phantom Skinz, and by far phantom skinz are the smoothest and clearest I have ever seen. Someone at androidcommunity.com reviewed the Phantom Skinz with pics. My G1 came out just as clear as this one. http://androidcommunity.com/forums/f13/phantonskins-installed-w-pics-9781/
My kit for the N1 should be here soon and I will post some pics.
Wow, it seems like PhantomSkinz is the big winner, especially at reduced price with not one, but two skins. Hard to argue against that!
But then, BSE is higher on the poll. Hmm
What's funny is that I never hear anyone say anything good about Invisible Shields.
Paul22000 said:
Wow, it seems like PhantomSkinz is the big winner, especially at reduced price with not one, but two skins. Hard to argue against that!
But then, BSE is higher on the poll. Hmm
What's funny is that I never hear anyone say anything good about Invisible Shields.
Click to expand...
Click to collapse
I always had good experiences with Invisible Shield and Clear Protector (they're the same product...). I have one on my G1's screen and it's outstanding. I bought the Phantom Skinz for the G1 because I assume it's the same or similar material to IS and CP. The fact that it ran less than $6 didn't hurt either.
I used both Invisible Shield and Bodyguardz on my iPhone. Sticky screen protectors don't last forever, mostly due to corners lifting and/or lint.
When I changed my IS the skin was absolutely perfect and unmarked. Bodyguardz didn't fare so well and was noticeably scratched quickly, even though I always take great care of my devices.
Both did an excellent job of protecting the screen, not a single mark there. But I know I will go with Invisible Shield again for my Nexus - scratches on the screen protector are annoying!
BSE is awesome :] I've used it on every expensive electronic I ever had.
I bought full body wrap from Clear Freak Technologies or something like that. It cost around 15$ with shipping, but quality is sh**.
I just ordered the 2 for $16 from Phantom Skinz, will report back after the install.
zjchaser said:
I just ordered the 2 for $16 from Phantom Skinz, will report back after the install.
Click to expand...
Click to collapse
I did the same. The testimonials in here sound legit. I even went on other forums and saw nothing but good things about phantom skinz. Bought today and already shipped out. Looks good so far.
well i did the special on the phantom skins too. I also ordered the hard case from amzer but realized that the hard case from them isnt shipping till the 31 of january. I dont like not having something on this to protect it. so hopefully the PS are good. These kind of kits scare me water and phone dont mix...
markimar said:
well i did the special on the phantom skins too. I also ordered the hard case from amzer but realized that the hard case from them isnt shipping till the 31 of january. I dont like not having something on this to protect it. so hopefully the PS are good. These kind of kits scare me water and phone dont mix...
Click to expand...
Click to collapse
I got my PS screen-only kits y'day.. only 2 days from when I ordered. They seem like the Invisible Shield and Clear Protector's I've used before, but totally smooth. I'll probably install one tonight. Anyway, I think that plus the Amzer case should be a nice combo for protection.
My paranoid install method for wet protectors involves sealing everything but the screen with a combo of painters masking tape and plastic, lol... so it's a tad time consuming for someone as anal retentive as me.
Take some pictures if you guys can!
Also, wow @ BSE taking the lead. I'm wondering though, do people like BSE strictly because it's so much cheaper than the others?
Has anyone here used BSE and another brand, and is able to share their experiences? Especially BSE vs Phantom Skinz
I ordered a zagg on friday ill let you know how it is when i get it but my friends use them on their iphones and g1's and i like the quality and lifetime warranty is nice too.
I was perusing the Rearth Case thread and from there came across the i-Blason TPU case. Like the Rearth, it's $10USD well in US, not sure if it's available internationally yet.
I have it on and sporting it right now. I do like it. It gives the phone better grip IMO. The only negative is that it's not clear. I mean you can still see the nexus name but not the sparklies lol. I have also posted a pic of a holster that I had back when the HTC Sensation first came out and I needed some sort of holster before Seidio came out with one. Don't mind the cords lol...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Other colors are black and pink.
Anywhere here is the amazon linkage
http://www.amazon.com/i-Blason-SoftGel-Flexible-Frost-Clear/dp/B009Y0ZH6Y/ref=lh_ni_t
I have already ordered this case from amazon it should be here Monday or Tuesday, I will post impressions then.
Sent from my Nexus 4 using xda app-developers app
I ordered it too. We'll see how it goes.
Sent from my Nexus 4 using Tapatalk 2
Um, I already ordered two other cases but I like this one better.
Put it on my wish list.
I also ordered this same case, in the frost, I will also post my impressions about it.
Sent from my Nexus 4 using xda app-developers app
If someone could comment on a good glossy tpu case (maybe this one is), I find those have much better grip than matte.
kpjimmy said:
I was perusing the Rearth Case thread and from there came across the i-Blason TPU case. Like the Rearth, it's $10USD well in US, not sure if it's available internationally yet.
I don't have a N4 but waiting for one eventually and wanted to see what cases there are. Currently I have a Sensation with an i-Blason case and love it as well. Anyone want to try it out? I personally want a clear/frost one. Other colors are black and pink.
Anywhere here is the amazon linkage
http://www.amazon.com/i-Blason-SoftGel-Flexible-Frost-Clear/dp/B009Y0ZH6Y/ref=lh_ni_t
Click to expand...
Click to collapse
Please dont buy these I-Blazon cases, they are the same ones sold from china for so much cheapER!! BEWARE!!!!
FaDeGFX said:
Please dont buy these I-Blazon cases, they are the same ones sold from china for so much cheapER!! BEWARE!!!!
Click to expand...
Click to collapse
The "s line" ones from China are really thick and ugly IMO, I haven't seen much else on eBay yet
yomuppet said:
The "s line" ones from China are really thick and ugly IMO, I haven't seen much else on eBay yet
Click to expand...
Click to collapse
im saying that this case can be found with a brand for cheaper
FaDeGFX said:
im saying that this case can be found with a brand for cheaper
Click to expand...
Click to collapse
I respectfully disagree with your opinion. For my Sensation, I have both the cheap ebay ones that can be bought for around 2-4 dollars and I currently have the i-Blason. Yes they are similar, but the main difference for me when I got these for my Sensation was that the openings and buttons did not align 100%. With the i-Blason, on the Sensation anyway did. So that is why I was inquiring if anyone has tried these out yet.
But you may be right, you never know with new products, but I want to see the proof in the pudding.
I don't know about their quality yet, but I pre-ordered with them because they claimed to be shipping on the 13th. So I figured I'd pick it up just because it was the first case I saw available.
Well turns out it didn't ship until the 21st and that was the last day of their expected timeframe that it would be delivered. They did not expedite the shipping and would not get back to me about requesting a refund on the shipping.
At this point, even if it's a nice case I'm sending it back. I don't like doing business with companies that fail to communicate (and yes, at least with Google I had someone to call regardless of them knowing something, they still answered. They also honored Free shipping for failing to meet shipping timeframe).
Other than that, I ordered the black one and I'll update with the quality of it and pics with it on the device.
Sent from my Nexus 4 using xda app-developers app
I also ordered this case in Frost Clear.
I was a little disheartened to look at the product photos today and see the true representation of the case on the phone.
When I ordered the case on the 19th, the images they showed on Amazon were obviously Photoshopped, but I had hoped they were a decent representation of the case, just not having an actual model phone to place them on for product photos.
The Frost Clear product on the 19th looked like this in their image : imgur.com/PrIEy.jpg
Now, looking at the new image they have, the thing is near white. : imgur.com/PrIEy.jpg
I should have mine in an hour or two, and can take photos and post if anyone is interested. I'll wait to get it in my hands to determine if I'm satisfied. I was looking for something a bit more subdued and dark, yet clear enough to see the rear design of the phone a bit. This new white frosted version is much the opposite of that.
kpjimmy said:
I respectfully disagree with your opinion. For my Sensation, I have both the cheap ebay ones that can be bought for around 2-4 dollars and I currently have the i-Blason. Yes they are similar, but the main difference for me when I got these for my Sensation was that the openings and buttons did not align 100%. With the i-Blason, on the Sensation anyway did. So that is why I was inquiring if anyone has tried these out yet.
But you may be right, you never know with new products, but I want to see the proof in the pudding.
Click to expand...
Click to collapse
Hmmm, for my sisters s3 she had also ordered 2 cases. One from I-Blason for 15$ and the same on from hong kong for 2.50$ and in the end I think even the Hong Kong was better but your opinion is your own and I will not change it Its just im in high school and I make sure to get the best deals because I cant just go buy the most expensive ones.
Received mine - Photos
Just got mine in the mail. Again, it's definitely not what I was expecting with the original product shots they used on the amazon page.
Here's the gallery : imgur.com/a/QcCKr
I got this as a stop-gap until the bumper or a nicer case was available, so I'm not cringing so much for the time being, but it definitely looks cheap and looks like a toy with this on.
I was hoping for a more tinted plastic with a dark tinted plastic for the back, as the original images would have you believe.
I can say, for the most part, the new photos are very representative of the final product.
Aside from the looks, it feels pretty secure. the case has a bit of give on the left and right sides of the phone, making it feel squishy. The back part that is frosted isn't very grippy, it's more of a paper-like feel, like they just sanded down the clear material. there's no logos to be seen on the case at all, which i'm actually quite happy about. I figured the i-blason logo was going to be on the back, as some of the images had shown. The clear portions aren't super grippy, but there's a bit more than the bare Nexus 4 had. The buttons are harder to press than they are bare.Kinda hard to get used to the pressure needed. It's not a ton, but more than I'm used to.
There's a notch at the top of the front, for the receiver, which was a nice touch, to keep it fully open. The ridge around the front of the phone covers the chrome completely and comes in on the curved glass almost all the way. the height from screen-plane to top of the ridge is probably no more than 1mm, if that. It's the same thickness as a credit card, if that gives anyone a good indicator.
Overall, I'm alright with the purchase. I wasn't expecting a top quality case, just something to make me feel a bit more secure with it until the right case arrives. I didn't like the common s-curve case, so I got this one. sorta wished I had gotten the dark grey s-curve instead, to have the darker look I wanted.
Hope this helps anyone else out there.
delrazor said:
Just got mine in the mail. Again, it's definitely not what I was expecting with the original product shots they used on the amazon page.
Here's the gallery : imgur.com/a/QcCKr
I got this as a stop-gap until the bumper or a nicer case was available, so I'm not cringing so much for the time being, but it definitely looks cheap and looks like a toy with this on.
I was hoping for a more tinted plastic with a dark tinted plastic for the back, as the original images would have you believe.
I can say, for the most part, the new photos are very representative of the final product.
Aside from the looks, it feels pretty secure. the case has a bit of give on the left and right sides of the phone, making it feel squishy. The back part that is frosted isn't very grippy, it's more of a paper-like feel, like they just sanded down the clear material. there's no logos to be seen on the case at all, which i'm actually quite happy about. I figured the i-blason logo was going to be on the back, as some of the images had shown. The clear portions aren't super grippy, but there's a bit more than the bare Nexus 4 had. The buttons are harder to press than they are bare.Kinda hard to get used to the pressure needed. It's not a ton, but more than I'm used to.
There's a notch at the top of the front, for the receiver, which was a nice touch, to keep it fully open. The ridge around the front of the phone covers the chrome completely and comes in on the curved glass almost all the way. the height from screen-plane to top of the ridge is probably no more than 1mm, if that. It's the same thickness as a credit card, if that gives anyone a good indicator.
Overall, I'm alright with the purchase. I wasn't expecting a top quality case, just something to make me feel a bit more secure with it until the right case arrives. I didn't like the common s-curve case, so I got this one. sorta wished I had gotten the dark grey s-curve instead, to have the darker look I wanted.
Hope this helps anyone else out there.
Click to expand...
Click to collapse
Just got mine, I ordered the black, but amazon sent me the Frost Clear along with the Black, so I got 2 cases for the price of one lol....I can tell you the black looks nice, much nicer then the clear I think, I had a clear one on my S3 and no matter what clear TPU starts to turn yellow over time. Will post some pics in a few of the black. The case looks alot like Diztronic it has a matte black finish on the back and gloss bezel, it covers the curved edge of the glass, which for me is a nice touch since most screen protectors that arent wet apply won't be covering that part of the phone...one thing is the bottom and top edge, since the bezel is covered up my screen protector i had to cut since it was pushing it up other than that great buy for 10 bucks..also the cutouts are perfectly aligned....no complaints fits securely in the case much like a Diztronic case.
And a few more pics
Well I got my covers and id post pictures but they'd just be redundant. Not much to see
Sent from my Nexus 4 using xda app-developers app
Any way to polish up the back to make it more grippy? Seems silly to have a case be just as slippery as the phone
yomuppet said:
Any way to polish up the back to make it more grippy? Seems silly to have a case be just as slippery as the phone
Click to expand...
Click to collapse
Really havent tried the clear one but the black one is grippy enough where its not super slippery like the phone itself. the back feels the same as the matte finishes on my diztronic cases.
Just received my frost clear one in the mail. Honestly wasn't expecting too much out of it, so I'm pretty content with the product. Sorry I don't have another camera on me to take pictures of it with it on the phone, but the updated pictures on their Amazon page comes pretty close. It is clear around with the back having that "frost" look, so you can see the Nexus and LG logo pretty clearly. I would've liked it if the whole case all around was that translucent frost, but IMO it's not too bad. I also wish the cut outs were more precise, especially for the rear speaker. It's just this big cut out as if they just guesstimated it... this is one thing that looks better and more precisely done in the Amazon photos than IRL. But overall it's alright. Only using it so I don't have to be concerned with damaging my phone until I get a nicer case when they start coming out.
Hello all,
I have just received a Cruzerlite 'Experience' case for review. Firstly, I'd like to thank XDA for this great website and to all the members on this forum, I've learned a lot and appreciate all the info found here on how to take full advantage of my Galaxy S4. I find it incredible the vast amount of knowledge on XDA and the willingness of others to share. Thanks to 'opasha' for announcing the need for Beta Testers. Cruzerlite contacted me via PM on July 6th and after emailing them my contact info, one of their products arrived in the mail on July 18. Please note that I am NOT being compensated financially for this review and that the opinion stated in this post is my own. As stated in 'opasha' original post, this is a product Beta Test. The final product you receive may or may not be exactly like the one in this review. I recommend contacting Cruzerlite ( http://www.cruzerlite.com/cases/samsung/galaxy-s-iv ) directly for any questions regarding specs, availability, color options, or additional information.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Came in the mail in a bubble pack. The case is enclosed in a clear plastic box, it's rigid enough so it doesn't get crushed in the bubble pack while being mailed:
The Case that I requested was for a bright color and they sent orange. Some of you may be picky like I am, the shade of the color is very important to me, here it is next to my S4 for comparison:
Since this is the 'Experience' case, it has graphics of various android themes. IMO it's fun and matches well with the bright orange. The back is frosted but the android graphics itself are clear:
Looking at the lateral edges you can see that it is also clear:
With the case on my Black Mist colored S4 it darkens the shade of orange a bit, to my eyes kinda like a light rust or light root beer color.
One thing to note from this angle is the quality of construction. On inferior/cheap ebay cases, there is a noticeable amount of excess material (flash) and at times there can be a edge or 'lip' formed at the seam of the where the front meets the back. If this occurs in a case it is quite an annoyance. On my current tpu case (a generic one I got off ebay, as I like yellow it was the only place to find that specific color) the lip is quite sharp.
On the Cruzerlite 'Experience' it did not exhibit any excessive 'flash' materials and the 'lip' was minimal. IMO, this is reflective of higher quality control and manufacturing standards that you may not find in a cheaper product.
Let's take a look at the dimensions of the Cruzerlite case. I measured my S4 as is and it came in at approximately .333 inches in thickness
With the 'Experience' case on it measured approximately .388 inches so the Cruzerlit TPU case adds a scant .05 to the overall thickness.
Next area to examine are the cutouts. Here we have the camera and flash. The cuts lined up correctly and is slightly raised around the camera. It's a dual hole design which I prefer. Other brands do a single cut for both camera and flash which IMO is less protective. Also the case adds some height to the phone so if you lay your S4 on a flat surface, it doesn't come into direct contact with the camera lens.
Areas around the ports are important to inspect, if it is cut too high or not thick enough in certain areas, it will affect the structural integrity of the case and can cause bowing making the case act or look flimsy. On my ebay case it bows around the front side where the volume and power ports so visually it looks bad. The Cruzerlite tpu IMO struck a good balance in it's construction, is not too soft (like a silicon case) but not overly hard (like a hard plastic). It's flexible enough to retain it's shape but soft enough to get it on and off easily while still being secure. Texture wise, the back is smooth to slide in and out of pants pockets with the lateral sides having enough tact for grip and not being overly slippery.
Moving down to the bottom of the phone the cut out for the charging port is slightly offset to the left. While it is not centered correctly it allowed plenty of space for the OEM micro usb cable and my aftermarket ones.
The microphone area is also off center. I was concerned with it blocking sound quality so I places several calls to see if it was affected. Fortunately it did not interfere with sound transmission nor did it affect volume.
The power button is exposed, which is a design I prefer. Other cases have it covered making it a tad more difficult to press.
On the volume button side, it's open just like the power button.
At the top of the phone the cut out for the 3.5mm headset jack and microphone are aligned. I use either a Monster iSport or Etymotic earbuds and the ports are wide enough to fit without any problems.
The ir port is also centered correctly allowing full function:
Going to the back side of the case, the speaker port is not centered but the cutout was wide enough for it to fully work.
Overall I am happy with the case. It's construction and quality is better than other tpu cases I have tried and comes in at a reasonable price (as listed on their site it's only $9.90). I've had it for 2 days now and it will be replacing the current one that I am using. Any changes on my impressions will be added to this post. I plan to use it for another 2-3 weeks and as I like it very much will purchase one from Cruzerlite ( http://www.cruzerlite.com/cases/samsung/galaxy-s-iv ), only hard part is deciding on what color!
Thanks again for the opportunity to review the case. I'd like to pay it forward and send this case out in a few weeks for review to another XDA'er. If you are genuinely interested in a orange case by Cruzerlite, reply to this post with either positive comments or constructive criticism. You must reside in the U.S. and actually own a S4 AND willing to post a unbaised review here on XDA within a week of receiving the case from me. Thanks for taking the time to read this review and hope that it helps. HAGWE everyone!
Great review! Very indepth. I am impressed with your ability tobreak down the pros and cons of the case to a scientific level
Amazon UK/EU
http://www.amazon.co.uk/s/ref=sr_nr...axy+S4&ie=UTF8&qid=1374453240&rnid=1632651031
Amazon US
http://www.amazon.com/s/ref=sr_nr_i...g+Galaxy+S4+cruzerlite&ie=UTF8&qid=1374453327
Superb review and pics very well done ty
Sent from my SGH-M919 using xda premium
So after getting an email from cruzerlite this morning I decided to check my mail. This is a review for the cyan/light blue Experience case from Cruzerlite.
Just as the previous reviewer mentioned the cutouts seemed to not be exact or correctly aligned on initial application to the phone. With some slight pull of the tpu and correct alignment I was able to get the case to properly adjust with near perfect alignment.
As for the design, it looks very good with the phone in the case. The images on the back of the tpu are on point , transparent and unique from your average tpu cases. At first I was debating on the color thinking it might be too light or not too "manly" of a color for me. Im glad I chose this color, it's more than I expected. The color is great, it has more of an aqua color appearance in person.
The IR sensor and noise canceling mic is centered and does not affect the sound quality performance. As for the headphone cutout it is wide allowing headphones (straight or L shaped) to fit properly.
The charge port cutout is wide allowing OEM to third party cables to be used with this case.
I do have a screen protector (cheap one) on my phone. The case does Not affect my screen protector. Meaning it does not raise any edges or cause any type of push to the screen protector.
The lip of the case greatly protects the screen from getting scratched while laying the phone screen down on a table or any flat surface; while at the same time adds a completely new appearance and feel for the user.
As you can see from the image below the case is just about a hair thinner compared to the platinum series case or "seido" case.
Overall I think the case is of premium quality. It seems very durable and will protect your phone from getting scuffed on the edges from accidental drops. This case exceeded my expectations thinking it would be just like the average tpu cases I have used on my past devices. I recommend this case to anyone looking into purchasing a tpu case. For the price listed on amazon I think its worth the purchase.
Edit: The camera is horrible with flash. I constantly get a blue tint on all pictures now. Only with the case on of course. Have moved back to previous case because of this.
Thanks to Cruzerlite and XDA for the opportunity of reviewing this case.
Thanks, hope this review helps someone who is considering a Cruzerlite and purchasing this case.
Appreciate you looking, IMO it's a well made case and comes in a variety of colors and styles.
Thanks for your indepth review j510, your case looks like it fits perfectly.
Damn that second one is Hnnnnnnng.... :victory:
picachux said:
Damn that second one is Hnnnnnnng.... :victory:
Click to expand...
Click to collapse
It is a nice ICS blue
HiredGUN.45 said:
Appreciate you looking, IMO it's a well made case and comes in a variety of colors and styles.
Click to expand...
Click to collapse
Just got the darker blue and it is also very nice
Droidguy987 said:
Just got the darker blue and it is also very nice
Click to expand...
Click to collapse
How long did it take you to receive your case from when you provided your shipping info? I'm really excited to try this case out.
GreenXSniper said:
How long did it take you to receive your case from when you provided your shipping info? I'm really excited to try this case out.
Click to expand...
Click to collapse
About 11 days no tracking shipped from germany
Received my green case yesterday, after a day of use around the job site I am gratefully impressed with the case. I'll try to get some pictures up tomorrow I'm not usually to much for tpu cases but CruzerLite has done it with this one. The textured back makes it not slippery, I've also taken the case on and off a bunch of times trying to see if it's going to stretch out and or wear to the point it doesn't fit properly. To my amazement I still fits perfectly, I've actually like it so much I want to pick up a couple more colors. The one and only thing that I don't personally care for that much is the icon pattern on the back but the good definitely out weighs the bad, I've also had a few people say they like the green case on black S4. If you are debating the case all i can say is don't great case and doesn't add much bulk. :good:
xxwckdxx said:
Received my green case yesterday, after a day of use around the job site I am gratefully impressed with the case. I'll try to get some pictures up tomorrow I'm not usually to much for tpu cases but CruzerLite has done it with this one. The textured back makes it not slippery, I've also taken the case on and off a bunch of times trying to see if it's going to stretch out and or wear to the point it doesn't fit properly. To my amazement I still fits perfectly, I've actually like it so much I want to pick up a couple more colors. The one and only thing that I don't personally care for that much is the icon pattern on the back but the good definitely out weighs the bad, I've also had a few people say they like the green case on black S4. If you are debating the case all i can say is don't great case and doesn't add much bulk. :good:
Click to expand...
Click to collapse
Look forward to the pictures
Droidguy987 said:
Look forward to the pictures
Click to expand...
Click to collapse
Was super busy today didn't get a chance to get the pictures taken
Sent from my SPH-L720 using Tapatalk 2
xxwckdxx said:
Was super busy today didn't get a chance to get the pictures taken
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
I understand
Green Galaxy S4 case Pics
Here you go.... bare with me used my wife's Epic 4g Touch to take the pictures.
I got the white Open Experience case today. I want to thank Cruzerlite for sending this case! My first impressions: the case feels very nice in the hand [better than anything I've bought off eBay for the same price this case goes for]. The cutouts are very precise (only thing is the speaker beside the USB port is slightly off but I am sure it will get fixed but no big deal as it doesn't cover it fully). There is a plus! I'm using a Spigen glass.tR slim and the case fits perfectly without chipping it off. Protection is minimal, the same you can expect with any cases in this category, however it does add a slight lip raising the phone's screen (even with my glass screen protector). The case is quite stylish it makes the phone stand out. I received the white one and dang the thing looks good with my black S4 (good contrast). Buttons are easy to press. Overall quality!
Sorry for the picture quality, they are taken with a Blackberry Curve
Might have been just a slight defect with yours or maybe the white one, my green one is spot on. By the way that white does look nice, thanks again Cruzlite
Sent from my SPH-L720 using Tapatalk 2
Blue open experience case
Hey Guys,
So I received my case for beta testing and on first glance, the case feels amazing. I will post pictures soon, but in the time being I have uploaded a video review/unboxing of the case. enjoy
LINK to VIDEO
https://www.youtube.com/watch?v=8K_8JsAx5O4
Hey, folks–
I'm on the hunt for a super thin case for my Pixel XL. By super thin, I mean, like in the 0.35mm range like the Peel cases for the iPhone (or Pinlo).
I've been searching around and I think the thinnest I've found so far are the clear case by Google and Spigen's Liquid Crystal Google Pixel XL Case, which appear to be about 0.64 to 1.63 mm and 0.762 mm thick respectively (they don't provide the case thickness specifically, so these are estimates based on product dimensions minus the actual Pixel XL's dimensions divided by two).
These are still too thick for my taste though. I don't like the look of those thick jelly cases.
I ordered a Naked Wrap from SlickWraps on the 10th, but I have yet to even receive a confirmation of my order from them outside of the PayPal receipt and I haven't been happy historically with the clear skins, so I'm looking for an alternative.
Has anyone spotted or heard of a company that might be developing Peel-like cases for the Pixel?
Well said and I am with you. Waiting for either that or a calicase. I did buy the Google clear because it may be perfect.
Sent from my Pixel XL using XDA-Developers mobile app
jackdforme said:
Well said and I am with you. Waiting for either that or a calicase. I did buy the Google clear because it may be perfect.
Click to expand...
Click to collapse
Considering you have a similar aesthetic, it sounds like, I would be curious to hear your impressions of the Google clear case.
Thanks for mentioning the CaliCase too–another brand for me to keep my eye on, their Ultra Thin cases definitely fit the bill. Too bad they're relatively inactive on Social and don't really talk about what they have in the works.
ste7enm said:
Considering you have a similar aesthetic, it sounds like, I would be curious to hear your impressions of the Google clear case.
Thanks for mentioning the CaliCase too–another brand for me to keep my eye on, their Ultra Thin cases definitely fit the bill. Too bad they're relatively inactive on Social and don't really talk about what they have in the works.
Click to expand...
Click to collapse
NP, next week I get it and the black silicone factory G case too. I also ordered a BearMotion because it's $8 and frankly I never have anything but success with them. The sand finish is the best for grip and they are really very thin. Usually no lip coverage though but that's kind of where I want the case to end. Just something about being able to slide your thumb from edge to edge without touching case improves the experience dramatically IMHO.
Looks like Spigen updated the pics of the Liquid Crystal case. Picture says .4 MM thick.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
taylor310 said:
Picture says .4 MM thick.
Click to expand...
Click to collapse
Unless that image is horribly cached for me, it still says 0.4 inches thick and they're referring to the whole phone including the case, which is why I landed at 0.762 mm in my first post because the Pixel XL is listed as 0.34" thick at its thickest point, so (0.4-0.34)/2 = 0.03 inches which is 0.762 mm (even though the back is probably thicker than the front).
Still looks pretty thin for a jelly case, but I'm holding out hope for one that doesn't add even that much bulk.
Doh. For some reason my brain read .4 MM thick.
ste7enm said:
Unless that image is horribly cached for me, it still says 0.4 inches thick and they're referring to the whole phone including the case, which is why I landed at 0.762 mm in my first post because the Pixel XL is listed as 0.34" thick at its thickest point, so (0.4-0.34)/2 = 0.03 inches which is 0.762 mm (even though the back is probably thicker than the front).
Still looks pretty thin for a jelly case, but I'm holding out hope for one that doesn't add even that much bulk.
Click to expand...
Click to collapse
Also TPU just feels like I am holding a condom.
jackdforme said:
NP, next week I get it and the black silicone factory G case too. I also ordered a BearMotion because it's $8 and frankly I never have anything but success with them. The sand finish is the best for grip and they are really very thin. Usually no lip coverage though but that's kind of where I want the case to end. Just something about being able to slide your thumb from edge to edge without touching case improves the experience dramatically IMHO.
Click to expand...
Click to collapse
Where did you find the bearmotion case at? I can't seem to find it for the pixel or pixel xl.
Thanks
Nick
slosrtnick said:
Where did you find the bearmotion case at? I can't seem to find it for the pixel or pixel xl.
Thanks
Nick
Click to expand...
Click to collapse
https://www.amazon.com/Ultra-Slim-C...080722&sr=8-1&keywords=bear+motion+pixel&th=1
jackdforme said:
NP, next week I get it and the black silicone factory G case too. I also ordered a BearMotion because it's $8 and frankly I never have anything but success with them. The sand finish is the best for grip and they are really very thin. Usually no lip coverage though but that's kind of where I want the case to end. Just something about being able to slide your thumb from edge to edge without touching case improves the experience dramatically IMHO.
Click to expand...
Click to collapse
jackdforme said:
https://www.amazon.com/Ultra-Slim-C...080722&sr=8-1&keywords=bear+motion+pixel&th=1
Click to expand...
Click to collapse
Awesome! Just placed my order! Thanks!
Nick
slosrtnick said:
Awesome! Just placed my order! Thanks!
Nick
Click to expand...
Click to collapse
np love their cases.
jackdforme said:
np love their cases.
Click to expand...
Click to collapse
Would you guys be willing to post some pictures and your thoughts on that bear motion case. Looks promising. Wish there was a white color, but gray will probably work for the white version of the phone.
frch0603 said:
Would you guys be willing to post some pictures and your thoughts on that bear motion case. Looks promising. Wish there was a white color, but gray will probably work for the white version of the phone.
Click to expand...
Click to collapse
I will when I receive. A note, get a DARK color. They pick up oils quick. Got a powder blue for my OG Note 7 and wound up with a dirt covered faded case in a week. But alas, the dark ones feel awesome and are thin as ****.
The bear motion cases are awesome. Grabbed a black one and green one. Have the green on my Nexus 6p and love the contrast.
As far as thin cases go...hard to beat.
Buddyfunlove said:
The bear motion cases are awesome. As far as thin cases go...hard to beat.
Click to expand...
Click to collapse
I'm happy that there's hope for us thin-lovers, but I'm still holding out for a semi-transparent one like the Peel cases so that I can see my phone through it–the frosted white / pretty-much transparent one that they call "silver" is calling my name. Part of my desire for such a thin case is to enjoy the natural industrial design of the phone but give it just a touch of protection. My Nexus 6P had begun to show a few of the drops on the corners recently and that's what I'm hoping to avoid.
ste7enm said:
I'm happy that there's hope for us thin-lovers, but I'm still holding out for a semi-transparent one like the Peel cases so that I can see my phone through itâ??the frosted white / pretty-much transparent one that they call "silver" is calling my name. Part of my desire for such a thin case is to enjoy the natural industrial design of the phone but give it just a touch of protection. My Nexus 6P had begun to show a few of the drops on the corners recently and that's what I'm hoping to avoid.
Click to expand...
Click to collapse
I had one of those for my iPhone 6s+. They are great, would be nice if they made one for the XL
Insignia has a case that's kinda like the peel cases. I had one for the iPhone 6 plus and it was thin as hell and felt very nice. I hope they make it for the xl.
im on the same boat. I ordered another clear case for $8 bucks in the meantime until i am able to get somethign like this below:
https://www.amazon.com/gp/product/B01761J26I/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
That bearmotion looks slick though. might order that one. Too bad they dont have more pics. Goign to have to check it out for other devices.
ste7enm said:
Hey, folks–
I'm on the hunt for a super thin case for my Pixel XL. By super thin, I mean, like in the 0.35mm range like the Peel cases for the iPhone (or Pinlo).
I've been searching around and I think the thinnest I've found so far are the clear case by Google and Spigen's Liquid Crystal Google Pixel XL Case, which appear to be about 0.64 to 1.63 mm and 0.762 mm thick respectively (they don't provide the case thickness specifically, so these are estimates based on product dimensions minus the actual Pixel XL's dimensions divided by two).
These are still too thick for my taste though. I don't like the look of those thick jelly cases.
I ordered a Naked Wrap from SlickWraps on the 10th, but I have yet to even receive a confirmation of my order from them outside of the PayPal receipt and I haven't been happy historically with the clear skins, so I'm looking for an alternative.
Has anyone spotted or heard of a company that might be developing Peel-like cases for the Pixel?
Click to expand...
Click to collapse
Same here order from slickwraps on 10th still processing [emoji57]
Sent from my iPad using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PhantomSkinz has tested and released their full line of products for the new Samsung Galaxy S10 and Samsung Galaxy S10+ including their popular Ultra Clear self-healing screen and full body protection film. PhantomSkinz has been making screen protectors for mobile devices since 2008 and is one of the favorites mentioned by many users across our forums. As many of you may know, the new in-display Ultrasonic fingerprint sensor used by Samsung does not work with most tempered glass screen protectors so PhantomSkinz is a great solution in general, but especially so with these new devices. We recommend PhantomSkinz for the reasons listed below:
• In-stock and shipping now
• Orders ship out same business day if placed by 2pm MST
• Designed and Made in the USA
• Backed by customer friendly Lifetime Warranty which provides replacements for as low as $5 without having to ship back the used product.
• Extremely responsive US based customer support
• 2 screen protectors for $14.95 plus free US shipping on orders $24.95+ and free worldwide shipping on orders $69.95+
• 32 options for full body coverage including wood, carbon fiber, metallic colors, and snake skin in addition to their self-healing films.
• “XDAdevelopers” discount code will get you 15% off through March 8th
S10 Test video
Benefits of PhantomSkinz over tempered glass:
• Works perfectly with the in-display ultrasonic fingerprint sensor on the S10 and S10+. See the video of the testing they performed below.
• Edge to Edge coverage with no air gap, or the option for a “case-friendly“ version
• Protector won’t crack/shatter unlike tempered glass which can be damaged from the slightest impact to the edge.
• Self-healing polymer is virtually scratchproof which means no micro-scratches.
• Very easy to clean and no oleophobic coating which are known to wear off relatively quickly with normal use.
• Adds grip when holding the phone, but is still very smooth when swiping or using gestures.
PhantomSkinz also claims that their products are superior to other film type screen protectors for a variety of reasons including:
• Proprietary topcoat offers superior resistance to scuffs, yellowing, and discoloration that many other film protectors suffer from
• Their unique topcoat also provides incredibly effective self-healing properties which virtually eliminate annoying micro-scratches
• Advanced adhesive formulation provides a strong bond to your device while resisting permanent impressions from fingernails, styluses, and everyday objects such as keys in your pocket. The products can also be removed without leaving adhesive residue behind.
• Ultimate in smoothness and clarity for this product category
• Product design is the best in the industry combining ease of installation with complete protection.
PhantomSkinz can be purchased for your Samsung Galaxy S10 or S10+ directly through their website:
For S10 For S10+
:highfive:
Thank you PhantomSkinz for sponsoring this thread.
Does this have the Orange peel effect?
So I ordered the Galaxy S10 Plus Case Ultra Hybrid from Spigen. Any idea if this will work with that case?
tandeh said:
Does this have the Orange peel effect?
Click to expand...
Click to collapse
There is some very slight orange peel texture with our Ultra Clear film which you can really only notice if the screen is off and if you are looking for it. I would say much less texture than some other brands and nothing like the texture these types of screen protectors had 5+ years ago. If you watch the test video linked in the original post, you can see us do some closeups on the screen and the texture doesn't even show up on camera.
---------- Post added at 08:32 AM ---------- Previous post was at 08:19 AM ----------
senor360 said:
So I ordered the Galaxy S10 Plus Case Ultra Hybrid from Spigen. Any idea if this will work with that case?
Click to expand...
Click to collapse
We have a case-friendly version available on our website as well. Basically, if the case covers over the edge of the glass, or flexes over the edge with normal use (such as pressing the side buttons or near the charge port), you should go for the case-friendly version of our screen protector.
If you don't have the case or phone yet, I would choose case-friendly by default just to be safe. Even the case-friendly version covers the vast majority of the glass including the curved edges. I took a look at your specific case and I would definitely get the case-friendly version.
post approved by svetius
Excellent! I've gone ahead and ordered 2 sets. Looking forward to putting those on, and maybe throwing up a review of my own on application, fit and feel. Thank you.
senor360 said:
Excellent! I've gone ahead and ordered 2 sets. Looking forward to putting those on, and maybe throwing up a review of my own on application, fit and feel. Thank you.
Click to expand...
Click to collapse
Great. We would definitely appreciate a review. If you have any questions about the products, let us know. And if you need a quick answer, we suggest the live chat on our website which is available from 8am-4pm weekdays
post approved by svetius
Since you're offering a coupon and a few things that I've been looking for (FULL edge to edge protection for us non-case people and no camera cut out), I think I'll give it a try! Thanks!
I'll post back with some thoughts after I've gotten it and used it.
Will you have any distributors in the UK? The shipping is more expensive than the screen protector itself
I'd like a case-friendly version
Slackworth said:
Will you have any distributors in the UK? The shipping is more expensive than the screen protector itself
I'd like a case-friendly version
Click to expand...
Click to collapse
Unfortunately we do not have any retail locations in the UK at this time. Yes international shipping is quite expensive (we actually charge less than we pay) but we do offer free international shipping on orders $69.95 or more. It's a relatively high threshold but if you have multiple devices you want to protector or a couple friends/family members who are interested it certainly helps to reduce the cost per skin.
Thanks for replying Definitely don't want to spend that kind of money unfortunately as all the devices are covered anyway.
Working for a technology company myself - I would suggest shipping a batch of these into "Fulfilled by Amazon" in some of the other popular regions around the globe then Amazon can handle the shipping and logistics for you and it works out cheaper for customers. Spigen do the same - my case from them came today from Amazon and I only ordered it yesterday
No S10E love?
Sent from my SM-G970U1 using Tapatalk
Slackworth said:
Thanks for replying Definitely don't want to spend that kind of money unfortunately as all the devices are covered anyway.
Working for a technology company myself - I would suggest shipping a batch of these into "Fulfilled by Amazon" in some of the other popular regions around the globe then Amazon can handle the shipping and logistics for you and it works out cheaper for customers. Spigen do the same - my case from them came today from Amazon and I only ordered it yesterday
Click to expand...
Click to collapse
Yes it is definitely something we have considered and we did sell some skinz on Amazon back in the days of the Palm Pre (hopefully we aren't dating ourselves too much there). However our product isn't quite as simple as a case since we currently offer 34 back options and 2 screen options for a total of 68 skus per device, per fulfillment center if we were to offer our full product line. So we appreciate the feedback and it is something we are still considering in order to provide the best experience for our customers.
x1tymez said:
No S10E love?
Sent from my SM-G970U1 using Tapatalk
Click to expand...
Click to collapse
We offer skinz and screen protectors for the S10e as well
https://phantomskinz.com/samsung-galaxy-s10e/
PhantomSkinz Guru said:
We offer skinz and screen protectors for the S10e as well
https://phantomskinz.com/samsung-galaxy-s10e/
Click to expand...
Click to collapse
man i'd love to buy and try out one of your protectors, but im from belgium so shipping costs are almost the same as the price of the product itself...
destz0r said:
man i'd love to buy and try out one of your protectors, but im from belgium so shipping costs are almost the same as the price of the product itself...
Click to expand...
Click to collapse
Yes unfortunately international shipping is quite expensive and there's not much we can do about that. We actually charge less for shipping than we pay since we add insurance to international shipments as well. The only suggestion we can provide would be to order a couple skins together (maybe with friends and family) in order to reach the free worldwide shipping threshold of $69.95.
senor360 said:
So I ordered the Galaxy S10 Plus Case Ultra Hybrid from Spigen. Any idea if this will work with that case?
Click to expand...
Click to collapse
I just applied both the screen protector (case friendly) and full body skin yesterday (Cherry wood.) I am loving both. I have a Spigen Liquid Air case (opaque, so I may have to fix that.) I have admittedly put my case on and off several times in the last 2 days, just because. No peeling from the rear skin. The protector has a faintly rubbery feel, but is clear, slick and smooth. It also attracts fingerprints, but then again, no afraid to wipe it down because protected. Works well with the case and I don't feel the edge of the protector. This was something i was worried about. The front facing camera works clearly and normally through the film. Fingerprint sensor works perfectly. I don't regret getting this at all, and this is from someone who avoided screen protectors for years.
I did install it myself, and thought I did a 98% good job. I was happy with it, but the manufacturer is conveniently a few miles down the road. I had them reapply it, again just because and I am a stickler for detail. They did a fantastic job, and it is now 100%. I would advise to do that if you happen to live in Phoenix.