Related
Is the seidio innocase II case still interfering with the screen protector?
Any retail stores carrying any brand name cases? (nyc)
Also anybody with actual pics of anti-glare SPs please share i currently have a mirror SP but im looking in to a anti-glare,
(anti-glare protectors make it so that people next to you arent able to see anything right?)
*If anybody wants to help me out i am undecided on a case between the innocase II or the tough case (case-mate) or the gelli case (case-mate) any actual pics of any of these cases would be greatly appreciated pros an cons also just any feedback from actual owners would be good...(i have done plenty research on these cases an im still undecided so any help would be appreciated well its not help more like suggestions thanks...)
carlost24 said:
Is the seidio innocase II case still interfering with the screen protector?
Click to expand...
Click to collapse
only slightly with mine. just a little "lifting" / bubble on the lower left edge of my screen protector. it's a great case though.
Any picture? Is that only if the SP is perfect size an covers every inch of the screen or it doesnt matter if the SP is a couple mm off the sides it still happens?
-------------------------------------
Sent via the XDA Tapatalk App
I don't know what case buy, I like this case mate too
I like this case better and I own the SI2 case
I like this case better and I own the SI2 case
Click to expand...
Click to collapse
What makes it better than the SI2?
-------------------------------------
Sent via the XDA Tapatalk App
DiGWeeD2 said:
I don't know what case buy, I like this case mate too
Click to expand...
Click to collapse
Its a great case. I wish they sold them in stores.
Anybody want to help with the other questions?
-------------------------------------
Sent via the XDA Tapatalk App
i have the seidio innocase ii that i purchased off Amazon last month. it definitely interferes with the screen protector as it's not flush with the screen edge and overlaps it by ~1mm. my BSE screen protector subsequently was stretched and scratched along the sides. following the advice from some posts on various forums, i sanded down the case's edges. now the case edge no longer rides along the screen edge. i have some bulk 3M laminate, which will be cut down, being shipped to replace my current BSE screen protector. also, in regards to any full body laminate "shields'/skins, it will definitely be a very tight squeeze w/ this Seidio case; i've had to remove mine except for the screen and the area by the trackball.
i have the seidio innocase ii that i purchased off Amazon last month. it definitely interferes with the screen protector as it's not flush with the screen edge and overlaps it by ~1mm. my BSE screen protector subsequently was stretched and scratched along the sides. following the advice from some posts on various forums, i sanded down the case's edges. now the case edge no longer rides along the screen edge. i have some bulk 3M laminate, which will be cut down, being shipped to replace my current BSE screen protector. also, in regards to any full body laminate "shields'/skins, it will definitely be a very tight squeeze w/ this Seidio case; i've had to remove mine except for the screen and the area by the trackball.
Click to expand...
Click to collapse
So if i purchase the innocase II how would i go about sanding it?, Just get some sand paper an rub against the edges? Till i see it not interfering or what?
-------------------------------------
Sent via the XDA Tapatalk App
Bought my Innocase 2 on ebay.
My screen protector from Clarivue online.
Allow the screen protector to settle for a day and then put in the Innocase.
No bubbles on mine whatsoever. Also considering I've taken the case off for like 30plus times already probably.
Does anybody know if Seidio makes cases to go over their extended batteries? I do not see one (yet) for the Nexus, but they have a banner saying to look for new and exciting accessories.
Bought my Innocase 2 on ebay.
My screen protector from Clarivue online.
Allow the screen protector to settle for a day and then put in the Innocase.
No bubbles on mine whatsoever. Also considering I've taken the case off for like 30plus times already probably.
Click to expand...
Click to collapse
But does it interfere with the SP, does it mess it up?
Anybody???
i've attached some photos of my phone and case. sorry for the poor photos as i tried to take it in macro mode w/o flash and i have no tripod. also, bear in mind that these are pictures after i had sanded the case edge.
the first pic is with the case on. i tried to highlight how the edge of case meets the screen edge. the second and third, with the case off, exhibit the Best Skin Ever screen protector and how it was affected by the case. when i put on the Seidio case initially the, ridge/rail on the case (seen in the fourth photo), scratched the protector and caused it to peel.
keep in mind, i also had a laminate on the battery cover at that point so it was a bit of a tight squeeze as the case is designed to fit the N1 very well. however, even after removing the skin from the battery cover, putting the case on/off still caused the screen protector to peel. if you're only installing the case once and don't intend to remove it frequently, i guess you this issue may not bother you. however, i wanted to remove my case (or at least slide it open) every night to charge w/ the N1 dock.
i subsequently sanded the edge of the case (4th pic). i sanded the side and posterior aspects with some sand paper. now, sliding the case on/off does not affect the screen protector and i have some new laminate being shipped to replace the current one (although it works fine).
i hope that helps!
thanks man i really appreciated.
carlost24 said:
But does it interfere with the SP, does it mess it up?
Click to expand...
Click to collapse
I already stated that I got no bubbles. And I didn't have to file!
But does it interfere with the SP, does it mess it up?
Click to expand...
Click to collapse
I already stated that I got no bubbles. And I didn't have to file!
Click to expand...
Click to collapse
Is not about the bubbles its about the edges of the screen protector on the sides people are saying the sides of the case ride up on the SP an mess it up as pictured above
I have literally done this exact process but in using cheap eBay screen covers instead of the phantomskinz bodyprotector had
vexingv said:
i have the seidio innocase ii that i purchased off Amazon last month. it definitely interferes with the screen protector as it's not flush with the screen edge and overlaps it by ~1mm. my BSE screen protector subsequently was stretched and scratched along the sides. following the advice from some posts on various forums, i sanded down the case's edges. now the case edge no longer rides along the screen edge. i have some bulk 3M laminate, which will be cut down, being shipped to replace my current BSE screen protector. also, in regards to any full body laminate "shields'/skins, it will definitely be a very tight squeeze w/ this Seidio case; i've had to remove mine except for the screen and the area by the trackball.
Click to expand...
Click to collapse
carlost24 said:
But does it interfere with the SP, does it mess it up?
Click to expand...
Click to collapse
mine made it start to peel up if you werent real careful to flex it and get it on top
stopped using mine due to it not fitting in dock
Hey guys, ive never bought a tempered glass screen protector, and im wondering how case friendly they are? Im due for my upgrade on monday so id like to get one on order as long as its G2G with the bodyglove dropsuit rugged series case. Thanks
hi,
I did not have any problem but the case I use is one you find in the att store. it's not a 'slim' case by any stretch its a very thickish rubbery type thing for maxiumum protection. you could probably drop kick the phone and not even phase it.
the temperd glass with the case I'm using is no problem -- both I got in the att store when upgraded. my advice if you are shopping around online is to find people who use the case you do and ask them
munoz303 said:
Hey guys, ive never bought a tempered glass screen protector, and im wondering how case friendly they are? Im due for my upgrade on monday so id like to get one on order as long as its G2G with the bodyglove dropsuit rugged series case. Thanks
Click to expand...
Click to collapse
i use a Spigen Slim Armor with my glass screen protector without any problems, also, they look fantastic and feel very nice in the hand:good:
Sinchero said:
i use a Spigen Slim Armor with my glass screen protector without any problems, also, they look fantastic and feel very nice in the hand:good:
Click to expand...
Click to collapse
+1
I have 2 different versions of the Spigen and love the tempered glass I got from Luvvitt and Amazon
I have a Zagg Glass on mine and it fits fine into the Otterbox Defender.
I recommend Nillkin, the glass has beveled edges which will slide on the object that makes contact with the glass' edges and therefore prevent movement pressure. If you decided to go for another brand, I suggest you also look for beveled edges.
to be honest id say it fits most of the cases.. only bumpers might have some problems
Same here as Taz420nj, Zagg Glass and a Otterbox Defender case. I should have my Trident Kraken case this coming Tuesday. Best of both worlds as far as protection goes.
munoz303 said:
Hey guys, ive never bought a tempered glass screen protector, and im wondering how case friendly they are? Im due for my upgrade on monday so id like to get one on order as long as its G2G with the bodyglove dropsuit rugged series case. Thanks
Click to expand...
Click to collapse
I have this one from Cybertech. It claims to be 0.15mm thick. It is very thin so that seems possible. It is unscathed after a month.
They are very inexpensive ($6.49 w/free shipping) so I may order 2-3 more.
It hasn't interfered with any of my cases. My daily case is a Caseology but I have a few others that I sometimes use..
I'm looking for a case that provides moderate protection from drops since I'm pretty clumsy with my tablet usage. I'd like to be able to put on tapered glass on the tablet with a case backing it up to ensure that it has good protection from drops.
Anyone know of any good combinations? It'd be a huge plus if I can close the case as well like a notebook.
Go on you tube and check out the Unicorn Beetle.
I am looking for the same kind of thing a case that works with tempered glass. Wish I could offer advice. Subscribed.
Arachnis said:
Go on you tube and check out the Unicorn Beetle.
Click to expand...
Click to collapse
It has a built in screen protector and those built in ones are pretty garbage. Also I specifically stated for a cover that covers the tablet front when it's not in use similar to a book type of cover but I can settle for a TPU case if it doesn't have a built in screen protector.
owenstar said:
I am looking for the same kind of thing a case that works with tempered glass. Wish I could offer advice. Subscribed.
Click to expand...
Click to collapse
You and me both bud. Sadly, there's not much variety to choose for this tablet. The leather book cases doesn't seem to provide moderate protection. I might just settle for the Moko case if the tapered glass fits in just fine.
The beetle has survived after a few minor drops. The screen cover isn't that great and after a while it starts to suck. I'm going to remove it and use a glass protector instead, because that works?
Sent from my SCH-I545 using XDA Free mobile app
I have a tab s 10.5 and with the cover original from samsung I use a protection case from Qilive, I can say it really protect the tablet.
I use the BobjGear Rugged Cover for the tab-s and i have a tempered glass screen protector on also. But it does not have a cover.
Im using slimarmor. accidentally dropped on stairs 15 setps high.. checked it.. unscathed. Cost - 300php or roughly $7
I'm using a Moko slim case for my 8.4. It provides decent protection from scratches and minor bumps. Not sure it will hold up against long drops. Cool thing is it has magnet to wake the tablet up when you open the cover. They're on sale on Amazon for around $14.
Are there any curved/wet install screen protectors that will fit round the curved edges of the S6 or is a glass one the way forward?
I am clumsy and outdoors lots so would want some proection and it seems a lot of the plastic protectors only just about cover the screen.
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Spigen screen protectors leave gaps around the border. Not as much as glass sp. This is to accommodate "case friendly" design.
HKSpeed said:
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Click to expand...
Click to collapse
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
JayX2A said:
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
Click to expand...
Click to collapse
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
HKSpeed said:
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
Click to expand...
Click to collapse
Not got the phone yet - was pre ordering bits! I don't mean the whole front of the phone. On the spigen website it shows the protector being slightly wider than the display, but review I read elsewhere seem to have it cut quite narrow and it barely covers the active part of the screen.
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
HKSpeed said:
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
Click to expand...
Click to collapse
Have the Fusion on my Nexus - pretty good but teh back is coming away from the sides now. Like the look of the Rinke slim though.
Got some Spigen ones, they are pretty close to the size of the screen. Have to be so careful to line it up properly! Shame they didnt make it that fraction bigger, but I guess that was not possible due to the screen curve.
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Duzzy5 said:
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Click to expand...
Click to collapse
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
benjmiester said:
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
Click to expand...
Click to collapse
Ordered a couple of super cheap 0.26mm ones that I found online.
https://www.replacebase.co.uk/samsu...or-0-2mm-ultra-clear-with-oleophobic-coating/
Arrived yesterday and look ok - will see how they go on and if there are any halo issues.
JayX2A said:
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
Click to expand...
Click to collapse
I have a SUPER thin tempered glass screen protector for the front and back of my s6. On the back it is quite large so it has the halo but on the front it is cut so it just about covers the actual display bit, so there is no halo on the front. It covers the samsung logo at the top and the capacitive buttons at the bottom like any other screen protector. Both costs me £2.49 on eBay UK. After using a much thicker tempered glass screen protector on my s3 I would say that the thicker ones feel as if they would offer better drop protection.
Looking into buying a case tonight. Any takers?
Before you read lol this is overkill but Decided to go with tempered glass from Pleson. I've used them before on my Moto X '15 no problems!
Going to see how the tempered glass and clear case work out!
I'm going to give the protector a try only because I want to have a glass screen to slide my finger on. Plus, who needs to worry about scratches, right? I think it'll work out well because the screen seems flat. I'm still deciding if I'm going to get a case or not.
A glass screen protector is a really good idea to improve the feel. I'd try to get away with just a bumper for a case. Full disclosure, I played with them at Verizon yesterday but I don't have one.
Sent from my XT1575 using XDA-Developers mobile app
Purchased an Otterbox Defender case. I needed tough case and didn't have any experience with heavy duty cases other than Supcase's Unicorn Beetle, Otterbox's Defender, and Trident Case's Kraken. Supcase has one for preorder and I doubt the Trident will release a Kraken case for the Moto Z Droid.
The Defender is what I expected; A durable inside case surrounded by a softer shell. Had the same terrible plastic screen protector as every other Otterbox case. Popped it off the case, removed the adhesive with the edge of a blade.; With a tempered glass screen on the phone itself the fit is a bit snug, but the inner case still closes and everything still lines up correctly so everything is good on that end. What I didn't expect is the belt carrier is actually decent; the phone can attach in every orientation (face up/down, rotated 180 degrees about the face). It adds a bit of bulk, but I will gladly take it over a simple shell or soft case.
masterjay21 said:
Before you read lol this is overkill but Decided to go with tempered glass from Pleson. I've used them before on my Moto X '15 no problems!
Going to see how the tempered glass and clear case work out!
Click to expand...
Click to collapse
How did these work out for you??
blynkofaneye said:
How did these work out for you??
Click to expand...
Click to collapse
Dudee they just came today and the Pleson Case fits perfectly like a glove! You cannot use the case with the included removeable wood plate. The Pleson tempered glass is a perfect fit! Now I'm looking for a bumper that allows Moto Mods.
Driosenth said:
Purchased an Otterbox Defender case. I needed tough case and didn't have any experience with heavy duty cases other than Supcase's Unicorn Beetle, Otterbox's Defender, and Trident Case's Kraken. Supcase has one for preorder and I doubt the Trident will release a Kraken case for the Moto Z Droid.
The Defender is what I expected; A durable inside case surrounded by a softer shell. Had the same terrible plastic screen protector as every other Otterbox case. Popped it off the case, removed the adhesive with the edge of a blade.; With a tempered glass screen on the phone itself the fit is a bit snug, but the inner case still closes and everything still lines up correctly so everything is good on that end. What I didn't expect is the belt carrier is actually decent; the phone can attach in every orientation (face up/down, rotated 180 degrees about the face). It adds a bit of bulk, but I will gladly take it over a simple shell or soft case.
Click to expand...
Click to collapse
That sounds amazing I'll try that Otterbox Case as well. I expect added bulk but is it overbearingly weighty?
masterjay21 said:
Dudee they just came today and the Pleson Case fits perfectly like a glove! You cannot use the case with the included removeable wood plate. The Pleson tempered glass is a perfect fit! Now I'm looking for a bumper that allows Moto Mods.
Click to expand...
Click to collapse
Awesome. Is the bumper pretty low-profile? Damn, I thought it might make the Style Shell not usable, bummer. Let us know if you find a case that will accommodate the shell/mods! Can you post pics of the bumper/screen protector? Would love to see real-world pics.
blynkofaneye said:
Awesome. Is the bumper pretty low-profile? Damn, I thought it might make the Style Shell not usable, bummer. Let us know if you find a case that will accommodate the shell/mods! Can you post pics of the bumper/screen protector? Would love to see real-world pics.
Click to expand...
Click to collapse
The case i purchased in the above photos is a clear case bro! Feels pretty nice in hand too. And when i find a moto mod bumper case I'm definitely post pics ASAP. Even a video
masterjay21 said:
The case i purchased in the above photos is a clear case bro! Feels pretty nice in hand too. And when i find a moto mod bumper case I'm definitely post pics ASAP. Even a video
Click to expand...
Click to collapse
Only one I've found so far that works with mods is one of the official ones from VZW. Appears to be pretty similar to the rest of the bumper cases out there, but twice the price:
http://www.verizonwireless.com/accessories/two-tone-bumper-for-moto-z-force-droid-edition
masterjay21 said:
Before you read lol this is overkill but Decided to go with tempered glass from Pleson. I've used them before on my Moto X '15 no problems!
Going to see how the tempered glass and clear case work out!
Click to expand...
Click to collapse
Was about to order this exact set up. Questions:
1) The case is all clear right? The pics make it look like the sides are rose gold.
2) Any issues installing the screen protector? I've never had a glass and the reviews say that its prone to bubbles.
HotShotAzn said:
Was about to order this exact set up. Questions:
1) The case is all clear right? The pics make it look like the sides are rose gold.
2) Any issues installing the screen protector? I've never had a glass and the reviews say that its prone to bubbles.
Click to expand...
Click to collapse
No problems it had bubbles but i forced them out.
And glass is the best new craze bro! It's worth it trust me! This screen can crack ice seen it better the tempered glass than a scratched screen.
The Case is all clear like water.
https://dbrand.com/shop/moto-z-force getting this and tempered glass.
Sent from my Nexus 6 using Tapatalk
Driosenth said:
Purchased an Otterbox Defender case. I needed tough case and didn't have any experience with heavy duty cases other than Supcase's Unicorn Beetle, Otterbox's Defender, and Trident Case's Kraken. Supcase has one for preorder and I doubt the Trident will release a Kraken case for the Moto Z Droid.
The Defender is what I expected; A durable inside case surrounded by a softer shell. Had the same terrible plastic screen protector as every other Otterbox case. Popped it off the case, removed the adhesive with the edge of a blade.; With a tempered glass screen on the phone itself the fit is a bit snug, but the inner case still closes and everything still lines up correctly so everything is good on that end. What I didn't expect is the belt carrier is actually decent; the phone can attach in every orientation (face up/down, rotated 180 degrees about the face). It adds a bit of bulk, but I will gladly take it over a simple shell or soft case.
Click to expand...
Click to collapse
Mine arrives Tomorrow
Sent from my XT1650 using Tapatalk
I got this pair:
Screen Protector: https://www.amazon.com/gp/product/B01K1D37OG
Case: https://www.amazon.com/gp/product/B01JH36W98
Both fit and feel like they came from the factory. Very satisfied with both so far. I'll likely also get VZW's bumper "case" for when I'm carrying it around with mods.
[Edit]
After more reading on Verizon's bumper I think I'll hold off until someone else makes a decent mod compatible case.
Just pre ordered this https://www.amazon.com/gp/aw/d/B01HP44TUK/ref=ya_st_dp_summary
Sent from my XT1650 using Tapatalk
I use the cimo tpu case. It's cheap, durable, and stylish.
Apparently I can't post links from the labs app, but it's easy to find on Amazon.
I posted a more complete review in it's own thread, but for belt clip holster types...
Good: https://www.amazon.com/gp/product/B01H2K0M58/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 (Great fit with the Incipio Battery Pack on the phone)
Bad: https://www.amazon.com/gp/product/B01HCN4PB2/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 Too long... AGOZ one listed above it perfect length for a naked phone at almost exactly 6 inches of internal length (~15.5 cm). The MND, on the other hand, is about 6.75 inches in length (16.75 cm)... the naked phone swims in that much length.
Moto Z Force Droid Case Hard Back Bumper Hybrid Slim Cover
Found this case on ebay:
http://www.ebay.com/itm/like/351813033892?lpid=82&chn=ps&ul_noapp=true