Related
Hi xdas,
I just ordered my Nexus 4, finally!!, and i want to get some protection for my baby when it delivers. I am looking for a full screen protector film for front and back or even sides, and a bumper case, for a cheap and reasonable quality product. The official Nexus 4 bumper case is priced too high for a case, so i decided to look for other options. I would like to hear some suggestions on the full film screen protector and bumper case, and i would prefer to buy it from ebay or amazon or the company's official website, because i do not trust unknown sites.
The few products i found for bumper cases are:
Poetic Borderline Bumper Case - $9.95
Shenit Bumper Case - $14.95 (Not sure about this, seems unknown)
for full film screen i found:
XtremeGuard Full Body screen protector shield - $3.99 or $4.99
Skinomi TechSkin for Nexus 4 - $12.99
ZAGG invisibleSHIELD for Nexus 4 - Full Body ($20.96) vs Maximum Coverage ($20.65) I do not know if the Maximum is better because it might interfere with buttons and other holes because it is not cut properply
Note: Can anyone tell me also if *wet* application is good, because i read some reviews that it damages the phone, and you have to dip it in soap, yikes, a phone in water i think its going to damage it.
Can you guys recommend me to some other alternatives other than the one i posted and if also you can give me reviews on those i posted?
Thanks so much in advance!
*Edit: I added the links for each item.
BUMP! any suggestions still?
joshtrader said:
Hi xdas,
I just ordered my Nexus 4, finally!!, and i want to get some protection for my baby when it delivers. I am looking for a full screen protector film for front and back or even sides, and a bumper case, for a cheap and reasonable quality product. The official Nexus 4 bumper case is priced too high for a case, so i decided to look for other options. I would like to hear some suggestions on the full film screen protector and bumper case, and i would prefer to buy it from ebay or amazon or the company's official website, because i do not trust unknown sites.
The few products i found for bumper cases are:
Poetic Borderline Bumper Case - $9.95
Shenit Bumper Case - $14.95 (Not sure about this, seems unknown)
for full film screen i found:
XtremeGuard Full Body screen protector shield - $3.99 or $4.99
Skinomi TechSkin for Nexus 4 - $12.99
ZAGG invisibleSHIELD for Nexus 4 - Full Body ($20.96) or Maximum Coverage ($20.65) I do not know if the Maximum is better because it might interfere with buttons and other holes because it is not cut properly
Note: Can anyone tell me also if *wet* application is good, because i read some reviews that it damages the phone, and you have to dip it in soap, yikes, a phone in water i think its going to damage it.
*Sorry for not posting links, forum rules wouldn't allow me to because i just joined, i will add soon!
Can you guys recommend me to some other alternatives other than the one i posted and if also you can give me reviews on those i posted?
Thanks so much in advance!
Click to expand...
Click to collapse
I currently have the poetic bumper, and it's good till it splits, but the company has a really good warrant and has been shipping out replacements pretty quickly. Heard there's a new version, but waiting on this one to break first. As of screens protectors, I had an extreme guard, took it off, but prolly putting another back on. Just a helpful hint about applying wet apply screen protectors, DO NOT PLACE THE PHONE IN WATER. The protector goes in the water, then onto your phone. The phone is dry, the protector gets wet, to slide on the phone easier (giggedy). Here is a video to help you along. The wet apply protectors can go over the edges of the phone while the dry one won't cover that portion of the screen. Hope that helps.
http://www.youtube.com/watch?v=KVGa8ED4KBM&feature=youtube_gdata_player
-EP
Go with the xoskins case fit version. They are wet install but don't have orange peel. They also come with spray and lifetime replacements. Get a generic bumper on amazon. Some ship from china some ship from the US. Make sure so you dont end up waiting 2 months for a bumper.
I use skinomi carbon fiber skins on all my devices. No bumpers, cases, or anything else that makes the phone bulky or harder to carry in my front jeans pocket. Just ordered for my N4, can't wait to slap it on.
As for screen protector, I run it naked. I don't carry anything else in my left pocket besides my phone and just am generally careful to not scratch the screen.
I got a cheap xtremeguard for the back, nothing on the front because I love how slick it is and the poetic bumper.
For me it is the perfect setup except I'm on my 2nd bumper because the first one separated.
eep02b said:
I currently have the poetic bumper, and it's good till it splits, but the company has a really good warrant and has been shipping out replacements pretty quickly. Heard there's a new version, but waiting on this one to break first.
Click to expand...
Click to collapse
Do you know if the version selling on eBay is the newer version?
stretched said:
Go with the xoskins case fit version. They are wet install but don't have orange peel. They also come with spray and lifetime replacements. Get a generic bumper on amazon. Some ship from china some ship from the US. Make sure so you dont end up waiting 2 months for a bumper.
Click to expand...
Click to collapse
I'm confused about why people would use a wet install skin on the Nexus 4. Wet skins are meant for phones that don't need a bumper and give some shock absorption. The Nexus 4 needs a bumper/case because it is made from glass. If it falls with only a wet skin protecting it, it will still crack. Anyhow, the transparent sticky ones from eBay look even better and they only cost 50 cents.
turbodroid said:
I use skinomi carbon fiber skins on all my devices. No bumpers, cases, or anything else that makes the phone bulky or harder to carry in my front jeans pocket. Just ordered for my N4, can't wait to slap it on.
As for screen protector, I run it naked. I don't carry anything else in my left pocket besides my phone and just am generally careful to not scratch the screen.
Click to expand...
Click to collapse
Aren't you playing with fire? Even with skinomi, if you drop your phone once on the pavement, the glass will probably still crack.
Hi to all,
I'm considering buying something that can best protect my S4 display. What can you advise me against accidental falls or blows to the display?
What's best choice?
Cover?
Tempered display films?
Bumper?
Many thanks
kajapezz8 said:
Hi to all,
I'm considering buying something that can best protect my S4 display. What can you advise me against accidental falls or blows to the display?
What's best choice?
Cover?
Tempered display movies?
Bumper?
Many thanks
Click to expand...
Click to collapse
Personally-and others may disagree- I have glass screen protector from mime. Price is steep, but with 50% off, no hassle warranty from mime, it was worth it. Mind you, I got three replacements because I dropped my phone on concrete, then accidently dropped ipad on my phone. Both cases resulted in glass protector shattering, but the screen itself is completely fine.
On top of that, I use otterbox commuter when I go mt climbing, or camping.
Rakcoon said:
Personally-and others may disagree- I have glass screen protector from mime. Price is steep, but with 50% off, no hassle warranty from mime, it was worth it. Mind you, I got three replacements because I dropped my phone on concrete, then accidently dropped ipad on my phone. Both cases resulted in glass protector shattering, but the screen itself is completely fine.
On top of that, I use otterbox commuter when I go mt climbing, or camping.
Click to expand...
Click to collapse
Mmm ok...MIME at the moment cost 24$
Is the MIME case friendly? I have the spigen case so a screen protector needs to have minimal coverage to make room for the case lip.
Sent from my SCH-I545 using Tapatalk
If you have a spigen case, buy a spigen tempered glass protector. They all are all comparable with each other as long as they are spigen brand. Personally I had a mime feather lite tempered glass protector and it worked great. They're quite thin, but thin enough to where it will crack if flexed too much during installation. I recommend a spigen glassTr protector. They're ultra durable and don't diminish the capability of the screen at all. Well worth the price.
As far as cases go, I'm using a spigen neo hybrid. I've dropped my phone from about six feet up a few times now, and the case has protected the phone perfectly. Its also fairly thin so it doesn't add a very much bulk at all. As far heavy protection goes, otter box ultimately has superior protection.
Sent from my SCH-I545 using xda app-developers app
I have been using the spigen crystal series screen protectors ( $8 for 3) and the neo hybrid case. Seems to protect pretty well.
Sent from my GT-I9505 using XDA Premium 4 mobile app
kajapezz8 said:
Mmm ok...MIME at the moment cost 24$
Click to expand...
Click to collapse
$24, but amazing customer service, and 50% discount on future replacements in case protector shatters.
You get what you pay for.. eBay has cheaper ones, but doesn't have the same quality, nor after sales support.
oconnell84 said:
Is the MIME case friendly? I have the spigen case so a screen protector needs to have minimal coverage to make room for the case lip.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
With mime, there is small space around the edges, for cases with curling lips.
I have spigen neo hybrid, and ultra thin case. Additionally, otterbox commuter and samsung official case (not sview nor flip cover). And I can say all the cases fit without a problem.
Otterbox or something similar. If you can get a discount even better, but the price is worth the protection these type of cases provide.
Rakcoon said:
$24, but amazing customer service, and 50% discount on future replacements in case protector shatters.
You get what you pay for.. eBay has cheaper ones, but doesn't have the same quality, nor after sales support.
With mime, there is small space around the edges, for cases with curling lips.
I have spigen neo hybrid, and ultra thin case. Additionally, otterbox commuter and samsung official case (not sview nor flip cover). And I can say all the cases fit without a problem.
Click to expand...
Click to collapse
Amazing customer service is a stretch. Just see how they handle people who buy their cases.
Caferacer said:
Amazing customer service is a stretch. Just see how they handle people who buy their cases.
Click to expand...
Click to collapse
Just make sure you buy it from them directly (their Amazon or Ebay outlet).
Buy from *ANYWHERE ELSE* and they do not support you. Even if it can be verified that the product is authentic.
This is egregious and I will never buy their product again.
tech_head said:
Just make sure you buy it from them directly (their Amazon or Ebay outlet).
Buy from *ANYWHERE ELSE* and they do not support you. Even if it can be verified that the product is authentic.
This is egregious and I will never buy their product again.
Click to expand...
Click to collapse
This is why I didn't feel bad buying a knockoff slimarmor s-view. At least I know I'm not getting no customer service and the price reflects that. Spigen gets the benefit of claiming awesome customer service, but only for a select group who buy through 2 options when multiple others are available. It's like samsung voiding your warranty because you bought your phone from AT&T and not verizon or sprint.
Caferacer said:
Amazing customer service is a stretch. Just see how they handle people who buy their cases.
Click to expand...
Click to collapse
Mime doesn't sell any cases.
This SPIGEN SGP Premium Tempered Glass Screen Protector GLAS.t NANO SLIM protected my screen like a champ when it fell, screen first, from aprox. 5 feet.
I like the MIME better and is what i have. I also have the Neo Hybrid and the slim armor cases from Spigen, I like the MIME Ghost glass best for 2 reasons.
first, The hardness rating is a 9H and the Spigen is an 8H rating so MIME is harder to scratch technically.
Second, The MIME is a .32mm thickness compared to Spigen's .40mm. I like this because with the very thin case edges the MIME still is recessed so if/when you put the phone face down it isn't resting on the glass protector.
1 more thing. MIME (others likely do too) has a thin layer of coating to resist finger prints. Solvents like windex and such will break that down. Use something for cleaning LCD and you will be better off. My first MIME Ghost Glass i used windex all the time and my finger prints were getting bad on it (way easier) and my 2nd one i only use the actual screen cleaner stuff and after 3 or 4 months it's still hard to get it all mucked up with prints.
does anybody have any experience with the Spigen Slim Armor View? i wanna get one of these along with a nano screen protector from Spigen as well, but i want to know what is my best choice between the Spigen cases
chinoquezada said:
This SPIGEN SGP Premium Tempered Glass Screen Protector GLAS.t NANO SLIM protected my screen like a champ when it fell, screen first, from aprox. 5 feet.
Click to expand...
Click to collapse
This is what I use and I love it. Completely cannot tell it's there and 100% feels like the bare screen since it is of course glass just like the bare screen.
liudmer.odaase.1987 said:
does anybody have any experience with the Spigen Slim Armor View? i wanna get one of these along with a nano screen protector from Spigen as well, but i want to know what is my best choice between the Spigen cases
Click to expand...
Click to collapse
Unrelated to the thread topic, but I have one in white and love it. I would suggest going through the slim view armor thread and finding a reputable knockoff dealer and getting it from there. Spigen will not replace it most times when it fails, even if you order it through an 'official' store and the hinges on the official case sometimes break.
I paid $15 for my knockoff and after 6 months of use on a construction site its still like new aside from the scratches. A glass screen protector does make it harder to press the home button to light up the s-view display, but that's a function of the screen protector thickness, not the case. With an aluminum home button sticker it goes back to a very light press.
I also run it with an official spigen glass.tr protector (Picked it up for $20, otherwise I wouldn't buy it).
Oh I complained about Spigen, but did not indicate what I use.
I use a glass screen protector. Glass all the way.
http://www.ebay.com/itm/171172132327?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
They show up fast and only cost $9 or so. They are a little thicker than the Spigen Nano but for me it doesn't matter.
It definitely doesn't matter at $9.
Spigen tempered glass screen protector all the way.
Serious they are really just the best. Not only in terms of protection, it's also super slim and ultra clear.
anti reflexion screen protector, best!
Hi all,
I am generally very good with phones and rarely damage them. That said my S4 has developed a crack in the midframe and a small dent on the front bezel frame, perhaps from just being in my pocket. I don't keep keys or anything in the same pocket so I'm not sure how it happened.
I have been using the ZAGG Glass screen protector on it and LOVE it. It is the clearest and smoothest protector I have ever used.
I think I want side protection for this thing. I probably should have protection since I work in active environments.. sometimes dusty..
A couple questions:
Once this case is on, how easy is it to take off to say, change microSD or swap batteries?
Will this case work if I use the ZAGG glass screen protector? This protector goes bezel to bezel PERFECTLY, although it does not cover the earpiece or sensor windows at the top.
Thoughts?
The case is very tough to take off, but it's not all bad because it has a tight seal for its water resistance. And secondly, it'll fit with the screen protector but it will not be water proof anymore, the glass is too thick. Hope this helps
Sent from my SPH-L720 using Tapatalk
tylerjames09 said:
The case is very tough to take off, but it's not all bad because it has a tight seal for its water resistance. And secondly, it'll fit with the screen protector but it will not be water proof anymore, the glass is too thick. Hope this helps
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Hmm, might be a deal breaker! Anyone know of a thin case that mostly just offers side drop protection but works with the glass screen protector?
Tech 21 impact mesh case. It is very light weight and offers crazy good protection!
Sent from my SCH-I545 using Tapatalk
Hi,
I haven't been using Lifeproof nuud case, but couple weeks ago I was looking for case for my Galaxy S4 and I bought Seidio Obex with holster and in my opinion it is very good case.
It is really waterproof case (I've checked it), dust proof (most important for me), impact proof and has built in screen protector (is giving amazing touch).
But there is couple things which are not so good, first of all sound is a bit muffled and second thing is that some ppl will complain about it size, but for me it isn't so important.
As a conclusion, I can only say that, for me personally it was really good purchase and I'm looking to buy additional car mount to holster.
muzicman82 said:
Hmm, might be a deal breaker! Anyone know of a thin case that mostly just offers side drop protection but works with the glass screen protector?
Click to expand...
Click to collapse
I've had the spigen slim armor case since I've bought the phone and I couldn't ask for anything more, slim, very protective, and looks great.
Since the S6 is very slippery but very good looking because of the glass, do you use a case because you want to be safe or do you use a skin to retain the phones thin body or you prefer it naked without anything on and around it?
Skin and Case! :good:
Definitely a case with shock absorbing properties. I'm not spending close to a grand on a glass encased phone just so it can have cracks on it.
I think the phone is gorgeous, but use a Verus aluminum bumper in order to get low drop protection and camera protection while keeping the phone mostly original looking. If it weren't for the protruding camera, I've consider carrying the phone bare. (Though I would be concerned with slippage.)
For comparison, I didn't hate the looks the of the S4, but I wasn't thrilled with them either so I put a Spigen Neo Hybrid on, which gave it a look that I liked more, while still looking like a phone and not a case. (Most people I showed my S4 to loved it and didn't realize it was a case.)
I think it's interesting that you bring this up because I asked a similar question in the "show us your case" thread, and people took offense to what I was asking. My basic question was "Do you use big UAG/Otterbox cases merely for protection, or do you prefer the look over the look of the bare phone." I guess I worded it poorly, as I mostly got defensiveness of case choices. Hopefully your thread gets better responses.
(In my photo below, the difference in screen glare and body color is only from a difference in lighting - I used different setups on different days and didn't match the screen lighting. There is no "glare" from the Verus case.)
Sent from my SM-G920F using Tapatalk
Spigen backless silver satin bumper
Sent from my SM-G920F using Tapatalk
naked is not a good idea.
friend dropped the phone and completely shattered the screen and created a spider web
flusha said:
naked is not a good idea. friend dropped the phone and completely shattered the screen and created a spider web
Click to expand...
Click to collapse
(Sounds to me like dropping the phone is a bad idea. )
That would be the risk to not having a potentially unsightly case.
Case + skin. case to protect from falls and skin to protect from scratches
Got both the uag maverick and ash case, prefer the ash on my sapphire black s6, and the maverick on a white s6 both look crazy awesome tho
I use a Dbrand skin and tempered glass screen protector in normal days. Just bought a spigen rugged armour as I'm gonna go on a 3 day camp and I don't wanna risk breaking it.
The dbrand skin should suffice for everyday use. It protects the rear glass from cracking if I ever drop it. And the tempered glass helps with the front glass. The only thing that is unprotected in the event of a drop is my sides.
It's your choice, do you like the feel of the S6 naked? Or would you rather have a cheap piece of TPU protecting it?
Also, if you choose to go naked/skin, the chamfered edges of the aluminium is very soft so it scratches rather easily. You can get a metal bumper to help with drop and impact protection on the sides.
Case. I would consider a skin, but the extra protection is nice. No way I'm carrying this phone naked. Then again, I never carry phones naked anyway.
Dbrand black leather skin on the back, otherwise naked. I hate cases, I'd rather pay for insurance and deductible for replacement than compromise the look and feel of a phone I like.
I just use screen guard both sides it looks and feels good
I had an iron shield on it but removed it about a week ago because the aluminum bumper was killing my GPS signal. Somehow in that week time I got a scratch on my screen. Make sure to put a screen protector on too!
Going naked. I did not pay $650+ to put this in a $5 case. I want to enjoy the phone as it was meant to be. I only have a tampered glass on top and that's good enough for me.
Sent from my SM-G920T using Tapatalk
Have a skin - slickwrap at the back, a case and a tempered glass on front.
Rhinoshield bumper for me with screen protectors on both front and back
ipaq_101 said:
Skin and Case! :good:
Click to expand...
Click to collapse
Brand skin with Rhino Shield bumpers
im using melkco italian cowhide leather herman series case , prefer using genuine leather case for my protection rather than back cover case or softcase, anyone fans from using genuine leather case maybe can sharing to me?:good:
Looking into buying a case tonight. Any takers?
Before you read lol this is overkill but Decided to go with tempered glass from Pleson. I've used them before on my Moto X '15 no problems!
Going to see how the tempered glass and clear case work out!
I'm going to give the protector a try only because I want to have a glass screen to slide my finger on. Plus, who needs to worry about scratches, right? I think it'll work out well because the screen seems flat. I'm still deciding if I'm going to get a case or not.
A glass screen protector is a really good idea to improve the feel. I'd try to get away with just a bumper for a case. Full disclosure, I played with them at Verizon yesterday but I don't have one.
Sent from my XT1575 using XDA-Developers mobile app
Purchased an Otterbox Defender case. I needed tough case and didn't have any experience with heavy duty cases other than Supcase's Unicorn Beetle, Otterbox's Defender, and Trident Case's Kraken. Supcase has one for preorder and I doubt the Trident will release a Kraken case for the Moto Z Droid.
The Defender is what I expected; A durable inside case surrounded by a softer shell. Had the same terrible plastic screen protector as every other Otterbox case. Popped it off the case, removed the adhesive with the edge of a blade.; With a tempered glass screen on the phone itself the fit is a bit snug, but the inner case still closes and everything still lines up correctly so everything is good on that end. What I didn't expect is the belt carrier is actually decent; the phone can attach in every orientation (face up/down, rotated 180 degrees about the face). It adds a bit of bulk, but I will gladly take it over a simple shell or soft case.
masterjay21 said:
Before you read lol this is overkill but Decided to go with tempered glass from Pleson. I've used them before on my Moto X '15 no problems!
Going to see how the tempered glass and clear case work out!
Click to expand...
Click to collapse
How did these work out for you??
blynkofaneye said:
How did these work out for you??
Click to expand...
Click to collapse
Dudee they just came today and the Pleson Case fits perfectly like a glove! You cannot use the case with the included removeable wood plate. The Pleson tempered glass is a perfect fit! Now I'm looking for a bumper that allows Moto Mods.
Driosenth said:
Purchased an Otterbox Defender case. I needed tough case and didn't have any experience with heavy duty cases other than Supcase's Unicorn Beetle, Otterbox's Defender, and Trident Case's Kraken. Supcase has one for preorder and I doubt the Trident will release a Kraken case for the Moto Z Droid.
The Defender is what I expected; A durable inside case surrounded by a softer shell. Had the same terrible plastic screen protector as every other Otterbox case. Popped it off the case, removed the adhesive with the edge of a blade.; With a tempered glass screen on the phone itself the fit is a bit snug, but the inner case still closes and everything still lines up correctly so everything is good on that end. What I didn't expect is the belt carrier is actually decent; the phone can attach in every orientation (face up/down, rotated 180 degrees about the face). It adds a bit of bulk, but I will gladly take it over a simple shell or soft case.
Click to expand...
Click to collapse
That sounds amazing I'll try that Otterbox Case as well. I expect added bulk but is it overbearingly weighty?
masterjay21 said:
Dudee they just came today and the Pleson Case fits perfectly like a glove! You cannot use the case with the included removeable wood plate. The Pleson tempered glass is a perfect fit! Now I'm looking for a bumper that allows Moto Mods.
Click to expand...
Click to collapse
Awesome. Is the bumper pretty low-profile? Damn, I thought it might make the Style Shell not usable, bummer. Let us know if you find a case that will accommodate the shell/mods! Can you post pics of the bumper/screen protector? Would love to see real-world pics.
blynkofaneye said:
Awesome. Is the bumper pretty low-profile? Damn, I thought it might make the Style Shell not usable, bummer. Let us know if you find a case that will accommodate the shell/mods! Can you post pics of the bumper/screen protector? Would love to see real-world pics.
Click to expand...
Click to collapse
The case i purchased in the above photos is a clear case bro! Feels pretty nice in hand too. And when i find a moto mod bumper case I'm definitely post pics ASAP. Even a video
masterjay21 said:
The case i purchased in the above photos is a clear case bro! Feels pretty nice in hand too. And when i find a moto mod bumper case I'm definitely post pics ASAP. Even a video
Click to expand...
Click to collapse
Only one I've found so far that works with mods is one of the official ones from VZW. Appears to be pretty similar to the rest of the bumper cases out there, but twice the price:
http://www.verizonwireless.com/accessories/two-tone-bumper-for-moto-z-force-droid-edition
masterjay21 said:
Before you read lol this is overkill but Decided to go with tempered glass from Pleson. I've used them before on my Moto X '15 no problems!
Going to see how the tempered glass and clear case work out!
Click to expand...
Click to collapse
Was about to order this exact set up. Questions:
1) The case is all clear right? The pics make it look like the sides are rose gold.
2) Any issues installing the screen protector? I've never had a glass and the reviews say that its prone to bubbles.
HotShotAzn said:
Was about to order this exact set up. Questions:
1) The case is all clear right? The pics make it look like the sides are rose gold.
2) Any issues installing the screen protector? I've never had a glass and the reviews say that its prone to bubbles.
Click to expand...
Click to collapse
No problems it had bubbles but i forced them out.
And glass is the best new craze bro! It's worth it trust me! This screen can crack ice seen it better the tempered glass than a scratched screen.
The Case is all clear like water.
https://dbrand.com/shop/moto-z-force getting this and tempered glass.
Sent from my Nexus 6 using Tapatalk
Driosenth said:
Purchased an Otterbox Defender case. I needed tough case and didn't have any experience with heavy duty cases other than Supcase's Unicorn Beetle, Otterbox's Defender, and Trident Case's Kraken. Supcase has one for preorder and I doubt the Trident will release a Kraken case for the Moto Z Droid.
The Defender is what I expected; A durable inside case surrounded by a softer shell. Had the same terrible plastic screen protector as every other Otterbox case. Popped it off the case, removed the adhesive with the edge of a blade.; With a tempered glass screen on the phone itself the fit is a bit snug, but the inner case still closes and everything still lines up correctly so everything is good on that end. What I didn't expect is the belt carrier is actually decent; the phone can attach in every orientation (face up/down, rotated 180 degrees about the face). It adds a bit of bulk, but I will gladly take it over a simple shell or soft case.
Click to expand...
Click to collapse
Mine arrives Tomorrow
Sent from my XT1650 using Tapatalk
I got this pair:
Screen Protector: https://www.amazon.com/gp/product/B01K1D37OG
Case: https://www.amazon.com/gp/product/B01JH36W98
Both fit and feel like they came from the factory. Very satisfied with both so far. I'll likely also get VZW's bumper "case" for when I'm carrying it around with mods.
[Edit]
After more reading on Verizon's bumper I think I'll hold off until someone else makes a decent mod compatible case.
Just pre ordered this https://www.amazon.com/gp/aw/d/B01HP44TUK/ref=ya_st_dp_summary
Sent from my XT1650 using Tapatalk
I use the cimo tpu case. It's cheap, durable, and stylish.
Apparently I can't post links from the labs app, but it's easy to find on Amazon.
I posted a more complete review in it's own thread, but for belt clip holster types...
Good: https://www.amazon.com/gp/product/B01H2K0M58/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 (Great fit with the Incipio Battery Pack on the phone)
Bad: https://www.amazon.com/gp/product/B01HCN4PB2/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 Too long... AGOZ one listed above it perfect length for a naked phone at almost exactly 6 inches of internal length (~15.5 cm). The MND, on the other hand, is about 6.75 inches in length (16.75 cm)... the naked phone swims in that much length.
Moto Z Force Droid Case Hard Back Bumper Hybrid Slim Cover
Found this case on ebay:
http://www.ebay.com/itm/like/351813033892?lpid=82&chn=ps&ul_noapp=true