Database Info

[Q] What Variant is my S6?

Hello,
My phone is a SM-G920F w/ 5.0.2 installed. The Baseband is G920FXXU1AOCZ build number LRX22G.G920FXXU1AOCZ . The only reason I'm asking is because I've seen others get an OTA for 5.1.1 but I haven't yet. I was wondering if I could Odin the phone to a UK variant?
The seller from the shop said it was a phone from Isreal flashed with a Region Free Firmware? but when I check the knox it was still intact. Is there any way to find out more information about the phone?
Thank you!

I have the exact same question. I have the G920F international unlocked model as well, using it on AT&T here in the USA. Phone's working great, but no update to 5.1, despite reading reports that Samsung has pushed 5.1 to the international variants. Is it because we're using the phone in the USA? Will we even get the OTA update, or will we have to update manually using ODIN?

Here you go UK ROM 5.1.1 BTU ready for you to flash:
http://http://www.sammobile.com/firmwares/download/50033/G920FXXU2BOFJ_G920FBTU2BOFJ_BTU/

roydok said:
Here you go UK ROM 5.1.1 BTU ready for you to flash:
http://http://www.sammobile.com/firmwares/download/50033/G920FXXU2BOFJ_G920FBTU2BOFJ_BTU/
Click to expand...
Click to collapse
Will it be compatible with my device?
Thank You for link!

roydok said:
Here you go UK ROM 5.1.1 BTU ready for you to flash:
http://http://www.sammobile.com/firmwares/download/50033/G920FXXU2BOFJ_G920FBTU2BOFJ_BTU/
Click to expand...
Click to collapse
I didn't ask the original question, so my apologies. But I was wondering if you had any advice on how I should proceed to update my device? I have the G920F that I bought unlocked off of Ebay and using it on AT&T here in the USA. It's working fine, but it says there are no updates. I don't even know if it'll even get an OTA pushed to my device since I am not in the originating region?
Should I just wait, or is it safe to go ahead and flash one of these 5.1 roms with ODIN that are for the G920F? If so, which one should I install? I think the first one available for the G920F was the France one. But now there are others. Does it matter which one I install? Or would I have to wait until a North American rom is available?
Thanks!
For reference, my build is G920FXXU1AOCV and my CSC is G920FOJV1AOBL. Not sure what those mean or how it applies to my situation?

L1qu1d said:
Will it be compatible with my device?
Thank You for link!
Click to expand...
Click to collapse
It is compatible with any G920F/G920FD.
---------- Post added at 02:28 AM ---------- Previous post was at 01:29 AM ----------
Travisimo said:
I didn't ask the original question, so my apologies. But I was wondering if you had any advice on how I should proceed to update my device? I have the G920F that I bought unlocked off of Ebay and using it on AT&T here in the USA. It's working fine, but it says there are no updates. I don't even know if it'll even get an OTA pushed to my device since I am not in the originating region?
Should I just wait, or is it safe to go ahead and flash one of these 5.1 roms with ODIN that are for the G920F? If so, which one should I install? I think the first one available for the G920F was the France one. But now there are others. Does it matter which one I install? Or would I have to wait until a North American rom is available?
Thanks!
For reference, my build is G920FXXU1AOCV and my CSC is G920FOJV1AOBL. Not sure what those mean or how it applies to my situation?
Click to expand...
Click to collapse
Ita still best to stick to your working 5.0.2 ROM and wait for official 5.1.1 OTA update which should come soon. Flashing exposes you to risks like bricking your S6, tripping Knox and voiding your warranty. If can't resist the itch then flash away.

roydok said:
It is compatible with any G920F/G920FD.
---------- Post added at 02:28 AM ---------- Previous post was at 01:29 AM ----------
Ita still best to stick to your working 5.0.2 ROM and wait for official 5.1.1 OTA update which should come soon. Flashing exposes you to risks like bricking your S6, tripping Knox and voiding your warranty. If can't resist the itch then flash away.
Click to expand...
Click to collapse
Thanks for response, I assume it's the same risks as me? I also wanted to get rid of the Israel edition and make it UK, will I hit any risks?

Risks are still the same. You can also consider flashing this Israel 5.1.1 stock ROM below:
http://www.sammobile.com/firmwares/download/49253/G920FXXU2BOFN_G920FOJK2BOF2_ILO/

roydok said:
Risks are still the same. You can also consider flashing this Israel 5.1.1 stock ROM below:
http://www.sammobile.com/firmwares/download/49253/G920FXXU2BOFN_G920FOJK2BOF2_ILO/
Click to expand...
Click to collapse
yeah saw that but was hoping to get rid of the Hewbrew/Arabic, and keep it all English
:angel:
Thank you again for your replies very helpful. Phones seem to be getting more complicated, but I'll root and install custom rom when warranty is up

G955FXXU1AQH3 unlocked, bloatware grabage problem.

Hey fella's, and ladies. I just got my G955F, bought inside of the US off of the same person I usually go through. Turns out It's a UK model that came with Vodafone bloatware and shows 4G instead of LTE (even though it IS LTE). Is there a US variant? And if so can I flash the phone with any G955F variant software using odin? So I guess I'm asking, what is the best, and purest firmware if I am in the US. I have T-Mobile and I'm in Cali. Thanks ahead. (Sorry, but I posted this in the S8 section originally, like a dumb-dumb)
Also, could I flash with G955U unlocked firmware?

http://updato.com/firmware-archive-select-model?exact=1&q=SM-G955F
Here you can download the US ROM and use Odin to flash - these are official ROM's so Knox will not be tripped

NO
You CANNOT flash a G955U rom to a G955F device
It will definately soft brick or even hard brick your device
You can flash this rom ( https://www.sammobile.com/firmwares/galaxy-s8/SM-G955F/EUR/download/G955FXXU1AQH3/184528/ )
No bloatware, multilang and fast updates.

meddylad said:
http://updato.com/firmware-archive-select-model?exact=1&q=SM-G955F
Here you can download the US ROM and use Odin to flash - these are official ROM's so Knox will not be tripped
Click to expand...
Click to collapse
DON'T GIVE WRONG INFORMATION!!!
If you don't know what you talking about, then say nothing!
You CAN'T flash G955U FW to a G955F
Do you know the difference between the G955U & G955F?
If you did, than you would have known the answer!!!
cc: @AlanRinzl3r

Read the post moron
He has a G955F phone with a UK ROM on it... he wants a US ROM so the link takes him to the US ROMS for a G995F phone
I didnt answer the last bit about the G955U as I only just saw that - and just to clarfiy the G955U is the Snapdragon version so no, a Exynos ROM will not work

t-shock said:
NO
You CANNOT flash a G955U rom to a G955F device
It will definately soft brick or even hard brick your device
You can flash this rom ( https://www.sammobile.com/firmwares/galaxy-s8/SM-G955F/EUR/download/G955FXXU1AQH3/184528/ )
No bloatware, multilang and fast updates.
Click to expand...
Click to collapse
This will be great if I can't find a US variant.
meddylad said:
Read the post moron
He has a G955F phone with a UK ROM on it... he wants a US ROM so the link takes him to the US ROMS for a G995F phone
I didnt answer the last bit about the G955U as I only just saw that - and just to clarfiy the G955U is the Snapdragon version so no, a Exynos ROM will not work
Click to expand...
Click to collapse
Got it. Couldn't find any US firmware on that page. Part of my question about the US firmware, or multilang firmware comes from the fact that Walmart sells G955F's. I would imagine whatever firmware is on there would be what I would want. Just don't know what that is.
-Thanks for all the replies so far. If I can't figure out what firmware comes on the US Walmart G955F phone, I suppose I will go with the variant listed above.
-Also, will VoLTE work on the multilang rom? Or is there a rom that works with T-Mobile and VoLTE? And if anyone is wondering, I wanted to Exynos variant, that's why I didn't buy G955U.

meddylad said:
Read the post moron
He has a G955F phone with a UK ROM on it... he wants a US ROM so the link takes him to the US ROMS for a G995F phone
I didnt answer the last bit about the G955U as I only just saw that - and just to clarfiy the G955U is the Snapdragon version so no, a Exynos ROM will not work
Click to expand...
Click to collapse
Look who's talking, MORON!
There is NO US-Firmware for the G955F-model!

t-shock said:
NO
You CANNOT flash a G955U rom to a G955F device
It will definately soft brick or even hard brick your device
You can flash this rom ( https://www.sammobile.com/firmwares/galaxy-s8/SM-G955F/EUR/download/G955FXXU1AQH3/184528/ )
No bloatware, multilang and fast updates.
Click to expand...
Click to collapse
Well, I went ahead and used this firmware. Really like it, no problems at all and its exactly what you said it would be (hopefully its got great support as well). Appreciate the direction. Thank you.
If anyone finds out what comes on the US released (Walmart) G955F, I would really like to know. I've been searching and searching, and can't seem to figure it out.

AlanRinzl3r said:
Well, I went ahead and used this firmware. Really like it, no problems at all and its exactly what you said it would be (hopefully its got great support as well). Appreciate the direction. Thank you.
If anyone finds out what comes on the US released (Walmart) G955F, I would really like to know. I've been searching and searching, and can't seem to figure it out.
Click to expand...
Click to collapse
No problem. Im sure that you will like it even more
If you can, please share a pic from the device info to see which CSC do you have

Hi guys, I've just got a G955F as an upgrade from Vodafone UK with lots of their bloatware. Can I flash any other firmware over it without tripping Knox or invalidating the warranty? I'm in the UK btw.
Sent from my SM-G955F using Tapatalk

Help me understand CSC?

Long time flasher, but haven't really come across "CSC" until recently and trying to figure out if I care.
Just picked up a SM-G930W8 to use in USA on AT&T. Rooted and flashed a custom ROM (Resurrection Remix/AOSP) replacing stock. Will be updating my modem which I'm used to doing, but am not sure if I should be looking at my CSC too...? Been doing some searching and reading and still not clear on WHAT the CSC affects, and when one might want or need to update it, and whether any of that even applies if you're not running a stock ROM or me in my situation.
Can someone provide some enlightenment? Thanks.

Determines which region the phone thinks you are in, which provides restrictions over features and OTA updates roll out dates

*Detection* said:
Determines which region the phone thinks you are in, which provides restrictions over features and OTA updates roll out dates
Click to expand...
Click to collapse
OK, thanks for that info. So that leads me to 2 questions:
1) Does "USA" count as a different "region" than Canada?
2) Since I'm using a custom ROM and not doing OTA stock updates, do I care?
One might assume that "restrictions over features" also becomes moot if you're using a custom ROM like RR vs. stock, as it's the stock ROMs with their carrier influence which might have restrictive features (hotpots, for example).

sremick said:
OK, thanks for that info. So that leads me to 2 questions:
1) Does "USA" count as a different "region" than Canada?
2) Since I'm using a custom ROM and not doing OTA stock updates, do I care?
One might assume that "restrictions over features" also becomes moot if you're using a custom ROM like RR vs. stock, as it's the stock ROMs with their carrier influence which might have restrictive features (hotpots, for example).
Click to expand...
Click to collapse
1.) Yes USA would be seen as a different region to Canada as they are different countries, but you also get multiple different CSC's per region too
For example UK unbranded CSCs are XEU and BTU, then you have the carrier CSCs which are carrier branded, but also for the UK for example
VOD - Vodafone
H3G - Three
O2U - O2
2.) No probably not, and generally custom ROMs have all CSC features enabled anyway such as VoLTE etc

Thanks so much. I'm going to learn to stop caring about CSC then. :good:

sremick said:
Thanks so much. I'm going to learn to stop caring about CSC then. :good:
Click to expand...
Click to collapse
:good:

//G965U TMB\\ Stock Odin Files Firmware G965USQU2ARC6

Stock Oreo G965USQU2ARC6 Odin files for T-Mobile S9+
***WARNING, CONTAINS BOOTLOADER V2. ONCE YOU FLASH, YOU WILL NOT BE ABLE TO DOWNGRADE TO ANY FIRMWARE CONTAINING BOOTLOADER V1. YOU'VE BEEN WARNED***
Model: SM-G965U
Model Name: Galaxy S9+
Country: USA
Version: Android Oreo 8.0
Security Patch Level: March 1st, 2018
Product Code: TMB
PDA: G965USQU2ARC6
CSC: G965UOYN2ARC6
Download here: G965USQU2ARC6
DOWNLOAD for ODIN:
ODIN v3.13.1

Hola
Can you say how would we know if we're on v1 of the bootloader?

QAM said:
Hola
Can you say how would we know if we're on v1 of the bootloader?
Click to expand...
Click to collapse
What's the build number on your device? It would be under settings in about phone.

Hola
I should state that I'm up in Canada, so we're using a different set of regional codes. Nevertheless the latest avialable build I see is: G965WOYV1ARC1 (I have no idea what security level this is). My carrier is still on a February security patch level with build number: G965WVLU1ARBG.

QAM said:
Hola
I should state that I'm up in Canada, so we're using a different set of regional codes. Nevertheless the latest avialable build I see is: G965WOYV1ARC1 (I have no idea what security level this is). My carrier is still on a February security patch level with build number: G965WVLU1ARBG.
Click to expand...
Click to collapse
ARC1 is still the Feb security patch and is firmware for koodo and telus in canada, rogers and the rest are still on arbg.

Iain_S said:
ARC1 is still the Feb security patch and is firmware for koodo and telus in canada, rogers and the rest are still on arbg.
Click to expand...
Click to collapse
Hola
Ok, but that still doesn't explain how can one know if we're on the v1 or v2 bootloader? Or is this bootloader versioning only applicable to the US region?

are there any issues with ARC6? if not i will take the plunge on my Canadian S9+
---------- Post added at 12:59 AM ---------- Previous post was at 12:54 AM ----------
QAM said:
Hola
Ok, but that still doesn't explain how can one know if we're on the v1 or v2 bootloader? Or is this bootloader versioning only applicable to the US region?
Click to expand...
Click to collapse
yeah i dont know how to tell which bootloader is on the canadian versions compared to the usa versions.

QAM said:
Hola
I should state that I'm up in Canada, so we're using a different set of regional codes. Nevertheless the latest avialable build I see is: G965WOYV1ARC1 (I have no idea what security level this is). My carrier is still on a February security patch level with build number: G965WVLU1ARBG.
Click to expand...
Click to collapse
You're on bootloader v1. The (1) before ARBG is the bootloader version.

Iain_S said:
are there any issues with ARC6? if not i will take the plunge on my Canadian S9+
---------- Post added at 12:59 AM ---------- Previous post was at 12:54 AM ----------
yeah i dont know how to tell which bootloader is on the canadian versions compared to the usa versions.
Click to expand...
Click to collapse
Hola
I would be very careful in attempting to load another regions firmware on your Canadian variant. There have be some users who have reported ending up with a bricked device attempting this sort of update. While you can find stock Odin files for our devices, it's still on the v1 bootloader. Not worth the pain...

Iain_S said:
are there any issues with ARC6? if not i will take the plunge on my Canadian S9+
---------- Post added at 12:59 AM ---------- Previous post was at 12:54 AM ----------
yeah i dont know how to tell which bootloader is on the canadian versions compared to the usa versions.
Click to expand...
Click to collapse
Let me know if you successfully flash on your device then I'll do it as I'm from Bell mobility

I got the downloads to go through. Will report once flashing is complete. Not sure which firmware will be on the phone when it arrives (att variant) but I'm gonna be flashing u1 then newest rc6 TMobile firmware. Hoping to have full features working as if originally a TMobile variant.
On a side note (mods please excuse) but Samsung. Com has the att variant on sale $639 ($200 off) and since I'm trading in my old s7 I'm getting an additional $200 off so $439 ($466 after tax) for a brand new s9+! Once i flash the TMobile firmware I'll be happy and for $400 off!

Anyone know if i need to sim unlock before flashing this? I've read about having to flash the unlocked rom before flashing the T-Mobile Rom and that's my other question. Can i just flash this tmobile firmware to the phone fresh out of the box or do i need to go to unlocked first (doesn't seem right) and put my TMobile sim in and be good?
My thoughts were that i could just sim unlock thorough a 3rd party then Odin the TMobile firmware and be done. Thanks

dannyHD2 said:
Anyone know if i need to sim unlock before flashing this? I've read about having to flash the unlocked rom before flashing the T-Mobile Rom and that's my other question. Can i just flash this tmobile firmware to the phone fresh out of the box or do i need to go to unlocked first (doesn't seem right) and put my TMobile sim in and be good?
My thoughts were that i could just sim unlock thorough a 3rd party then Odin the TMobile firmware and be done. Thanks
Click to expand...
Click to collapse
You have to unlock your device first, before flashing any other firmware besides your carrier firmware. Flashing unlock firmware, will not unlock your device.

dannyHD2 said:
Anyone know if i need to sim unlock before flashing this? I've read about having to flash the unlocked rom before flashing the T-Mobile Rom and that's my other question. Can i just flash this tmobile firmware to the phone fresh out of the box or do i need to go to unlocked first (doesn't seem right) and put my TMobile sim in and be good?
My thoughts were that i could just sim unlock thorough a 3rd party then Odin the TMobile firmware and be done. Thanks
Click to expand...
Click to collapse
SIM unlock has nothing to do with firmware/rom flashing. You can flash to any U/U1 firmware you want and your device will still be in the same carrier lock/unlock state it was before.
T-Mobile does do things a little differently, however. Flashing a different firmware won't SIM unlock your phone, but I do believe you need to be on a legitimate T-Mobile firmware to unlock the device via their built in unlocking app.

Awesome thanks guys. Will just get a 3rd party unlock service then flash.

If you got it from [email protected] they will unlock it free of charge. And if you didn't I would still try with them first before paying

Will use it to update my converted s9 plus from att to tmobile firmware.
I tried to search for updates in the menu but it says phone is already up to date. But version is RBG.
Latest one is ARC6

dannyHD2 said:
Awesome thanks guys. Will just get a 3rd party unlock service then flash.
Click to expand...
Click to collapse
lethalboy said:
Will use it to update my converted s9 plus from att to tmobile firmware.
I tried to search for updates in the menu but it says phone is already up to date. But version is RBG.
Latest one is ARC6
Click to expand...
Click to collapse
Did either of you do it yet? I'm in the same boat, just got my AT&T that I want to use on T-Mobile. I'm debating if I should flash unlocked or T-Mobile, and now the option of this new bootloader?

theredspecial said:
Did either of you do it yet? I'm in the same boat, just got my AT&T that I want to use on T-Mobile. I'm debating if I should flash unlocked or T-Mobile, and now the option of this new bootloader?
Click to expand...
Click to collapse
Im just waiting for Rogers in Canada to push out their latest update, which they say is now available, and its not. I want to see if they have updated from U1 to U2 before taking the plunge with this firmware.

What's the benefit to having T-Mobile f/w over unlocked? Or what's better about having unlocked? I'll be using it only on T-Mobile.

Reflash AT&T 20 Ultra to Unlocked Firmware?

I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.

viperhrdtp said:
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.

viperhrdtp said:
I've looked through threads of people doing the reverse of this. It's been a few years since I've had an android and was running nexus devices then. What's the process to flash an unlocked firmware on an AT&T locked 968U to the 968U1 firmware (assuming there aren't issues doing it)?
Are there any other pitfalls I need to be aware of prior to doing it other than the wifi calling?
If this is already posted somewhere else, please feel free to point me there. I didn't see any info about going from a carrier locked 968U to unlocked firmware.
Thanks in advance.
Click to expand...
Click to collapse
I just did this today went from TMB locked one to unlocked (For a family member) mine is unlocked. All went well no problems at all. Just download the U1 Firmware you want to flash and for CSC use home_csc (In ODin) so you can keep your data and probably the wifi calling feature too ( i did that all features are intact). Use the Odin and firmware from Ota and non Ota thread . Enjoy

ahenderson223 said:
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
Click to expand...
Click to collapse
What did you gain that made it worth it for you? Also, I'm on a Locked ATT/Firstnet Ultra and am wondering if flashing to an Unlocked Firmware would give me more control of my device.

that1guyty said:
What did you gain that made it worth it for you? Also, I'm on a Locked ATT/Firstnet Ultra and am wondering if flashing to an Unlocked Firmware would give me more control of my device.
Click to expand...
Click to collapse
If your on FirstNet I recommend that you stay on ATT branded software, I'm not sure if band 14 will work properly for you if you are on unlocked software. Thank you for your service!

ahenderson223 said:
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/ota-ota-firmware-n986u-t4143833/page71
I have done this and I lost WIFI calling and VOLTE. I'm very happy with it so far.
Click to expand...
Click to collapse
You can get VoLTE back, but yeah, WiFi calling is not gonna happen.
https://forum.xda-developers.com/ga...to/how-to-activate-video-calling-lte-t4178819
The thread is for T-Mobile, but most of it works with AT&T devices as well.

rjohnstone said:
You can get VoLTE back, but yeah, WiFi calling is not gonna happen.
https://forum.xda-developers.com/ga...to/how-to-activate-video-calling-lte-t4178819
The thread is for T-Mobile, but most of it works with AT&T devices as well.
Click to expand...
Click to collapse
I flashed the U1 firmware (ATJ3) onto my AT&T Note Ultra, then flashed the Home CSC from the AT&T U firmware. I have VoLTE and WiFi calling.

Help!
Hello all, I have a Note 20 Ultra 5g that is unlocked and I'm looking to flash the original ATT firmware for this device.
Having this unlocked version on Firstnet has been nothing but problems and I don't have access to band 14 or wifi calling.
I see this thread is a little old but if anyone could help me out or send me in the right direction I would greatly appreciate it!
I have rooted some of my older phones several several years ago so I think I could pick this back up pretty quickly. I know over the years things seem to get easier and have probably changed quite a bit since I've last done something like this.
Thanks in advance!

droppinbaums said:
I flashed the U1 firmware (ATJ3) onto my AT&T Note Ultra, then flashed the Home CSC from the AT&T U firmware. I have VoLTE and WiFi calling.
Click to expand...
Click to collapse
My comment was made before we were able to change IMS settings directly.
You can get it all now. VoLTE, WiFI Calling, RCS, Video calling...

Verntd3 said:
Help!
Hello all, I have a Note 20 Ultra 5g that is unlocked and I'm looking to flash the original ATT firmware for this device.
Having this unlocked version on Firstnet has been nothing but problems and I don't have access to band 14 or wifi calling.
I see this thread is a little old but if anyone could help me out or send me in the right direction I would greatly appreciate it!
I have rooted some of my older phones several several years ago so I think I could pick this back up pretty quickly. I know over the years things seem to get easier and have probably changed quite a bit since I've last done something like this.
Thanks in advance!
Click to expand...
Click to collapse
AT&T hasn't released any "official" firmware for the Note 20 series.
Since Samsung firmware is multi CSC, just flash any firmware with the same build number as the AT&T variant and use your AT&T SIM card.
Go to this thread https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/
Make sure you know what device you have, U or U1. Then grab the appropriate version.
Fir AT&T U devices, N986USQU2DUCA or N986USQU2DUCA will work.
For AT&T U1 devices, N986U1UEU2DUCB is the most recent version.

rjohnstone said:
AT&T hasn't released any "official" firmware for the Note 20 series.
Since Samsung firmware is multi CSC, just flash any firmware with the same build number as the AT&T variant and use your AT&T SIM card.
Go to this thread https://forum.xda-developers.com/t/ota-and-non-ota-firmware-for-n986u-and-n986u1.4143833/
Make sure you know what device you have, U or U1. Then grab the appropriate version.
Fir AT&T U devices, N986USQU2DUCA or N986USQU2DUCA will work.
For AT&T U1 devices, N986U1UEU2DUCB is the most recent version.
Click to expand...
Click to collapse
Ok thanks, according to this I assume I have the U1....?

Verntd3 said:
Ok thanks, according to this I assume I have the U1....?
Click to expand...
Click to collapse
Yes, based on screenshot, you have U1

warriorvibhu said:
I just did this today went from TMB locked one to unlocked (For a family member) mine is unlocked. All went well no problems at all. Just download the U1 Firmware you want to flash and for CSC use home_csc (In ODin) so you can keep your data and probably the wifi calling feature too ( i did that all features are intact). Use the Odin and firmware from Ota and non Ota thread . Enjoy
Click to expand...
Click to collapse
So i can flash rom n986u1 on N986u ?

romano_ezzat said:
So i can flash rom n986u1 on N986u ?
Click to expand...
Click to collapse
Yes you can, please look for instructions I have posted instruction on this device forum to go from U to U1 and vice versa