A friend just bought a tablet here in China preloaded with Android 2.1. Its setup to be used in China, which has given me problems in the past on my Android phone. Is there anyway to go about updating it to the new version of Android and maybe even getting rid of the Chinese app store and adding flash support (right now it says the device doesn't support it, even though it looks like it meets requirements)? You guys have been helpful in the past so thanks in advance for any advice.
Greetings,
While I been a tech for 20years supporting the WinTel systems, I am a noob to Android and ROM programming. I needed to be portable, and being unemployed didn't leave many cost-options available. I picked up a China knockoff called the MID M9000 (http://www.ebay.com/itm/330779120701?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649).
What I can confirm on it is that it does run a Cortex A8 (I guess that means it is a AllWinner A10??) running Android ICS 4.04. A look under About Tablet shows Model Number F900, Baseband Version 1.4rc3 Kernel 3.0.8 [email protected] #2 Fir Jul 27 10:27:12 CST 2012 Build Number 20120716-F900.I have some flakiness with the screen, the performance seems poor with alot of waits and do I want to kill the app. I have gone through with Android Assistance and Advanced Task Manager to kill off any background apps, loads, etc. Still no luck.
Funny thing someone dumped in my lap a cheapy Sylvania SYNET7WIC 7" Smartbook with Windows CE 7 this past week. I searched and found you could bootload MODROID (Android 2.2 mod) ROM and I get more responsiveness on that WM8650 CPU than I am getting from this Cortex A8. So I am hoping it is just a bad build, and like the SYNET7WIC be happily surprised with a Mod for my Cortex A8 to improve it as well.
I tried over at CM, but there seems to be no discussion about MID tablets. I found the Christian Troy AllWinner A10 thread (http://forum.xda-developers.com/showthread.php?t=1821398) but as I am not a DEV, I can't post to that thread to ask for help. All feedback or assistance is welcome, especially pointing to the right ROM and other parts I should use (I believe I have the right instructions) on how to do my first reimage to Jelly Bean. Thanks!
This seems to be a F900 tab
nerogoth said:
Greetings,
While I been a tech for 20years supporting the WinTel systems, I am a noob to Android and ROM programming. I needed to be portable, and being unemployed didn't leave many cost-options available. I picked up a China knockoff called the MID M9000 (http://www.ebay.com/itm/330779120701?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649).
What I can confirm on it is that it does run a Cortex A8 (I guess that means it is a AllWinner A10??) running Android ICS 4.04. A look under About Tablet shows Model Number F900, Baseband Version 1.4rc3 Kernel 3.0.8 [email protected] #2 Fir Jul 27 10:27:12 CST 2012 Build Number 20120716-F900.I have some flakiness with the screen, the performance seems poor with alot of waits and do I want to kill the app. I have gone through with Android Assistance and Advanced Task Manager to kill off any background apps, loads, etc. Still no luck.
Funny thing someone dumped in my lap a cheapy Sylvania SYNET7WIC 7" Smartbook with Windows CE 7 this past week. I searched and found you could bootload MODROID (Android 2.2 mod) ROM and I get more responsiveness on that WM8650 CPU than I am getting from this Cortex A8. So I am hoping it is just a bad build, and like the SYNET7WIC be happily surprised with a Mod for my Cortex A8 to improve it as well.
I tried over at CM, but there seems to be no discussion about MID tablets. I found the Christian Troy AllWinner A10 thread (http://forum.xda-developers.com/showthread.php?t=1821398) but as I am not a DEV, I can't post to that thread to ask for help. All feedback or assistance is welcome, especially pointing to the right ROM and other parts I should use (I believe I have the right instructions) on how to do my first reimage to Jelly Bean. Thanks!
Click to expand...
Click to collapse
I think this is a f900 generic chinese tab and a replica of this one http://temtop.en.alibaba.com/produc...13_1_5GHz_Cortex_A8_800_X_480_9_Inch_MID.html
I have the same tab and I was finding it hard to get a stable ROM to replace my factory ROM which had much more serious issues. I used this one on my tab and its been running much better now.
http://www.azhuo.net/en/products_F9...Capacitive_Android_4.0_Tablet_PC_Upgrade.html
Please note I still face issues with slowness and I need to reboot my tab everytime I play a resource intensive app/ game. I think its more to do with the hardware than with the firmware.
nerogoth said:
Greetings,
While I been a tech for 20years supporting the WinTel systems, I am a noob to Android and ROM programming. I needed to be portable, and being unemployed didn't leave many cost-options available. I picked up a China knockoff called the MID M9000 (http://www.ebay.com/itm/330779120701?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649).
What I can confirm on it is that it does run a Cortex A8 (I guess that means it is a AllWinner A10??) running Android ICS 4.04. A look under About Tablet shows Model Number F900, Baseband Version 1.4rc3 Kernel 3.0.8 [email protected] #2 Fir Jul 27 10:27:12 CST 2012 Build Number 20120716-F900.I have some flakiness with the screen, the performance seems poor with alot of waits and do I want to kill the app. I have gone through with Android Assistance and Advanced Task Manager to kill off any background apps, loads, etc. Still no luck.
Funny thing someone dumped in my lap a cheapy Sylvania SYNET7WIC 7" Smartbook with Windows CE 7 this past week. I searched and found you could bootload MODROID (Android 2.2 mod) ROM and I get more responsiveness on that WM8650 CPU than I am getting from this Cortex A8. So I am hoping it is just a bad build, and like the SYNET7WIC be happily surprised with a Mod for my Cortex A8 to improve it as well.
I tried over at CM, but there seems to be no discussion about MID tablets. I found the Christian Troy AllWinner A10 thread (http://forum.xda-developers.com/showthread.php?t=1821398) but as I am not a DEV, I can't post to that thread to ask for help. All feedback or assistance is welcome, especially pointing to the right ROM and other parts I should use (I believe I have the right instructions) on how to do my first reimage to Jelly Bean. Thanks!
Click to expand...
Click to collapse
Recently purchased a similar tablet from http://www.agptek.com/New-Android-4.0-MID-7-inch-Capacitive-TouchScreen-Tablet-458-96-1.html. I flashed Unofficial CyanogenMod 10 for many AllWinner A10 tablets with the MOMO9 compatibility zip; as the MOMO9 specs are identical to my tablet. Running very smooth, alot faster and more stable than the original ICS 4.0.3.
Where did yuo download the rom flash from? How has it been working for you? Are you still running it on 4.0.3, or are you on 4.0.4 now? I just got a Mid M9000 and kinda regretting it now, but if I can flash it, to a better rom, that would be awesome.
Thanks
Tim
MaiPan
Howdy,
Actually I scored instead MaiPan MX913 img file at Maipad dot net . I was reading some reviews because this is a a single core device, and they are now pushing out quad core tablets now, because any attempt with this chipset to do Jelly Bean results in the touch screen stop responding (I have tried three or four already). I think also the problem is how 'low end' the single core is, and is why they are dumping these like crazy.
I have actually seen quite a few posts that some still don't get good ICS response no matter the img file, and so regress back to Froyo with alot of positive results. I dunno if there is a patch with the Froyo to compensate for the changes to Adobe Flash and now the Java scripting changes, if your still not happy with the results from MaiPan.
I was going to sell mine on ebay, but now I might give it a try with the December img at MaiPan and seems to be pretty snappy, but won't replace my laptop where I can open several web pages at the same time I think. I will let you know how the latest image works as I am intending to test this weekend.
nerogoth said:
Howdy,
Actually I scored instead MaiPan MX913 img file at Maipad dot net . I was reading some reviews because this is a a single core device, and they are now pushing out quad core tablets now, because any attempt with this chipset to do Jelly Bean results in the touch screen stop responding (I have tried three or four already). I think also the problem is how 'low end' the single core is, and is why they are dumping these like crazy.
I have actually seen quite a few posts that some still don't get good ICS response no matter the img file, and so regress back to Froyo with alot of positive results. I dunno if there is a patch with the Froyo to compensate for the changes to Adobe Flash and now the Java scripting changes, if your still not happy with the results from MaiPan.
I was going to sell mine on ebay, but now I might give it a try with the December img at MaiPan and seems to be pretty snappy, but won't replace my laptop where I can open several web pages at the same time I think. I will let you know how the latest image works as I am intending to test this weekend.
Click to expand...
Click to collapse
Don't waste your time... I downloaded the 12.1 version of the MX913 (not DC), and now have no touch screen response...
Think I'll try the A10 AllWinner and see if that works.
Thanks
Tim
shankscomp said:
Don't waste your time... I downloaded the 12.1 version of the MX913 (not DC), and now have no touch screen response...
Think I'll try the A10 AllWinner and see if that works.
Thanks
Tim
Click to expand...
Click to collapse
Now I have tablet that boots up with NO touch screen... since I tried the MX913 firmware, I've lost screen responsiveness. I suggest to everyone NOT to buy any tablets from NoMoreRack.com. Their customer service sucks and their tablets are all cheap crap... I think I learned my lesson!
AW: [Q] MID Tablet M9000/F900 (AllWinner A10??)
I buyed such a crap tablet to.......the firmware bricked and then I had to try all of the firmwares which I found at one site.
After 2 weeks of non touchscreen working the last one saved it.......I learned my lesson also from those tablet [email protected]!%
Sent from my HTC EVO 3D GSM using xda premium
gesange said:
I buyed such a crap tablet to.......the firmware bricked and then I had to try all of the firmwares which I found at one site.
After 2 weeks of non touchscreen working the last one saved it.......I learned my lesson also from those tablet [email protected]!%
Sent from my HTC EVO 3D GSM using xda premium
Click to expand...
Click to collapse
Which one saved it? I really don't want to **** around another month with nomorerack.com to send this unit back and get another POS... So, if you could let me know tonight or tomorrow which firmware you used, that would be awesome.
Thanks
Tim
so has anyone found a better stable rom for the M9000?
I also just finished downloaded all m9000 from mid site. They have 4 firmware. M9000a/b/c/d .. I juat use the b. But can get the rear cam working. As originally it was Q station q09-06 somewhat model but similar to m9000. Really upset duh..... sorry for my poor english guys..
Any other recon firmware for this model??
Sent from my GT-I8190N using xda premium
http://www.maixin-china.com/software-download.asp#mx913-dc
MaPan MX913 DC Software 2013.2.21.rar (size: 389 MB)
I used this and I am now back in business
pprice520 said:
so has anyone found a better stable rom for the M9000?
Click to expand...
Click to collapse
Wow. Yes. Maybe. Here is my sad story with a rare happy ending:
I ordered a MID9000 from No More Racks--BIG MISTAKE!--When, a couple of months later, it finally arrived (to my surprise), I set it up and was delighted to find that it actually worked. Up until.....5 weeks later, I left it on the charger overnight and that killed it. It appears these units are susceptible to overcharging. It would not boot past the "android" screen. Well, being an android noob, I was clueless. I finally discovered the Kocaso site that had downloads for the image files. It is here (but seeing I'm a new user I cannot post the link). However, the software that they recommend for installing the firmware did not work on my Windows 7 unit. Further search brought me here (but seeing I'm a new user I cannot post the link but it is on the Tablet Mods site), which clearly explained how to download and use LiveSuit to install firmware from a PC to an android tablet. And so. Back to the mymidpad firmware page! If you check the m9000 firmware, there are 4 possibilities. It says to check your serial number on the back to determine which one to use. Woe is me--my m9000 had no serial number. What the heck did I have? And so, I tried all 4 possibilities. NONE of them worked. They all installed OK, but the touchscreen would not respond. At that point, I was ready to throw the machine in the garbage. But one last chance: I tried to install one of the images given for the M9100 (M9100f), and to my shock, it worked like a charm and my machine is working better than ever. Go figure! I suspect that my M9000 actually is a M9100, at least in part. Who knows. I'm happy, for the time being. The moral is: be careful you don't overcharge these units!
my problem is that the touch stopped working ...
hey I have the same problem and I can not fix !!!! I have the same model. please help !!!!
Hey so I have this spare Acer Liquid MT phone lying around, the phone lags like heck, it's still on android 2.3 something....(all is its very old and havent been charged for awhile). I was wondering if anyone here has any links to rooting and installing a newer version of android onto this phone. I've been using Iphone a lot so I don't know any technical terms for android or in fact much about android. Hope you guys and give me some links and mods that will go well with this phone =] I wanna experience android first before actually buying another android phone! Thx!!
Hi
I am new to ANdroid devcies as i only have Apple devices up till now, please bear with me. I just bough a Noza Tec Android table VII on kitkat 4.4.4 quadcore with 1GB RAM, this tablet was cheap and does not behave anything like a quadcore or 1GB RAM, it is very slow when using web browser and zooming in on anything is not smooth and does it in sections. I would like to try installing a custom ROM that would speed things up dramatically, as currently it is really poor.
Can anyone give advise on the best ROM for htis device and also if there is an installation guide as this is the first time i will be trying it and i dont want ot brick the tablet.
Any help appriciated. Thanks in advance
hiranuk3079 said:
Hi
I am new to ANdroid devcies as i only have Apple devices up till now, please bear with me. I just bough a Noza Tec Android table VII on kitkat 4.4.4 quadcore with 1GB RAM, this tablet was cheap and does not behave anything like a quadcore or 1GB RAM, it is very slow when using web browser and zooming in on anything is not smooth and does it in sections. I would like to try installing a custom ROM that would speed things up dramatically, as currently it is really poor.
Can anyone give advise on the best ROM for htis device and also if there is an installation guide as this is the first time i will be trying it and i dont want ot brick the tablet.
Any help appriciated. Thanks in advance
Click to expand...
Click to collapse
Hi.
I don't see any thread for that brand. That's maybe because is a Chinese device. It would be very very difficult to find a custom rom for this device, almost impossible I would say. I would suggest for you to stick to big names, like Samsung, Asus, etc. There's always a workaround with roms and rooting for these brands. Sorry I couldn't help more.
Hello guys, I would like to know if anyone could help me.
I have a tablet that I received at school once. But Android of it bricked, and I do not find the original ROM of it, but wanted to arrange a way to make it work again, even with a custom ROM.
Every time I turn it on, all system components start to stop working.
His model is Multilaser MLX1, he owns an android 4.2.2, he does not have 3G, just WIFI. Its processor is a dual core 1.2GHz.
It has 1 GB of RAM.