Database Info

(ROM) (Port) CyanogenMod 11 For Samsung Galaxy Ace 3 GT-S7270/GT-S7272

CyanogenMod 11 is a free, community built distribution of Android 4.4 (KitKat) which greatly extends the capabilities of your phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh really hard at you.
*/
Hey Guys,
So I was searching for a CyanogenMod Rom for the Galaxy ACE 3 the Broadcom model (3G) and after searching for some long time i found out that a CyanogenMod 11 Rom is actually available but it wasn't on XDA Forums so i thought of sharing it with you guys, of course i am not the developer of this Rom. Full credits goes to ZIM555. I just wanted to share it with everyone (I hope there is no problem with that if so please close this thread). The source from where i have discovered it from is in Russian so ill just translate it for you guys.
Pre-requisites:
*ClockworkMod Recovery https://yadi.sk/d/uUlc7MzTbfVuY
Installation (first time/new users):
*Flash and install the New CWM recovery
*In order to install the New CWM recovery (Open the old CWM Install it from sdcard then Reboot Recovery under Advanced)
*Do a Nandroid backup!
*Do a wipe data/factory reset
*Install the ROM from sdcard
*Reboot
Working:
*Audio
*Bluetooth
*Bluetooth tethering
*Camera
*USB Mass Storage
*USB tethering
*Wi-Fi Hotspot
*GPS
*Wi-Fi
*Lights
*Sensors
*Telephony - calling, messaging, mobiledata
*Touchscreen (multitouch)
*Camcorder
*OMX encoders/decoders
Not working:
*offline charging
Downloads:
CyanogenMod 11 (28.12.2014) https://yadi.sk/d/s6aCKPsSdgAPf
Note:
Here is the actual source : http://4pda.ru/forum/index.php?showtopic=486975&st=3560
GitHub: https://github.com/ZIM555
Thanks to:
[email protected] (The Original Developer)

thread updated please take a backup of your efs partition now

you can install it on dual sim variant as well

here is a video for this rom and if you want to install it follow my steps in this video https://www.youtube.com/watch?v=0EPRwEbFh7w

Thanks for making this ROM available in English.
The original Russian thread has added 70 pages since this link was posted. Is there an updated ROM in one of the newer posts? Has the offline charging problem been fixed? By offline charging, I presume you mean billing, not battery charging.

Status says Bluetooth is working, but on my phone the toggle won't stay on. After sliding it to the "on" position, it quickly retracts to the "off" position. Has anyone else had this problem?

I need a google cloud platform account. I can't port Lineage 14.1 with my slow connection and pc. Just give me any account that registered there. I will start porting.

Cyanogen Mod 12.1 for Lenovo P70-A x64 BIT

FLASH AT YOUR OWN RISK
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this Patch before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. ALWAYS DO A BACKUP, BACKUP and LASTLY BACKUPS!
Disclaimer :
Im not held responsible if you brick your phone, Read doc, Follow simple instructions
BUGS :
1. No FM Radio
2. Cant Move App to SD
Step for Installing CM12.1
1. Download the ROM (CM12.1)
2. Put at your SD Card
3. Go to TWRP
4. Wipe the Cache , Data , Dalvic and System
5. Install the ROM (CM12.1)
WARNING :
At first boot you need Install Immediately the G-Apps and after you install the G-Apps PLEASE ! REBOOT 2 Times (2x) your Phone to FIX Trebuchet Launcher (Black Screen)
Download LINKS :
ROM Link
G-Apps
Credits :
GOD
Kent John Jordan (facebook.com/MicroByte23)
Zoronax
ธนกฤษ เจนถาวรกิจ
XDA
Google

posted in a wrong section this section is for android apps/games

[ROM][UNOFFICIAL] [[Cynogen Mod 12.1]] Huawei Y6 PRO [TIT-AL00]

I am not make this ROM​
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Now I want to showing,How to instal CM12.1 for Huawei Y6 pro
Start->
1st
*click me and read it
*Requirements file :
Cynogen Mod 12.1: Download
Gapps: Download
#Install Process
1. Downloaded Rom and gapps put in sd card.
2.. Power off your Phone
3. Press Vol+ and power button and go to Recovery mode
4. CWM recovery mod and wipe menu, wipe data and go back to menu and go to munt... and format System and go back to menu.
5. Now select Install zip>choose zip form external_sd card>select ROM and wait.
6. Then install GAPPS.
7.REBOOT
8. 1st time boot take a sometimes like 5-10min.Don't worry.
*Tested on Huawei Y6 pro TIT-AL00.
BUG
*USB OTG NOT WORK
---------------------------------------------------------------------------------------------------------------------------
enjoy Cynogen MOD 12.1:good::good:

Is this rooted? Thanks!

hello,
thanks for the rom. really love cynogenmod. just a quick question, is it ok to install gapps stock package from opengapps website?
is this attached gapps package is mini/micro/pico?

CyanogenMod Marshmallow Huawei Tit-AL00
Please Link for Cyanogenmod HUAWEI TIT-AL00 Marshmallow version quick. Bored of Lollipop.

Can you tell me that how to install using twrp recovery and the procedure to go back to precious rom (i have twrp backup)

Is this rom work in Huawei Y6 Pro TIT-L01 ?

Work on TIT L01 ?

[ROM][XC][O][8.1][UNOFFICIAL]Paranoid Android 8.0.0-DEV

Obligatory disclaimer:
Code:
[SIZE="1"]/* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Preface:
Thanks in no small part to the awesome help from Tim Graham of the AOSPA-team, I was able to compile an unofficial build of Paranoid Android 8.0.0-DEV (Android 8.1)
for the Sony Xperia X Compact (kugo/f5321). I've been using it for a couple of days now without running into any (rom-specific) issues yet.
I've asked Tim if he didn't mind me posting the rom here and he gave the go ahead. So here we go!
Installation instructions:
* Backup important files beforehand just in case something goes awry.
* Wipe System, Cache and Data.
* Install zip-file with TWRP.
* Unzip and then flash Sony's ODM-image (v15) to the oem-partition using fastboot:
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v15_loire.img
What works:
* Data (2G/3G/4G/LTE)
* Wifi
* GPS
* Encryption
* Bluetooth
* Fingerprint sensor
* Camera
* Torch
* GApps (Open GApps 8.1 pico)
* Magisk (16.4)
Known issues:
* Boot animation is partly distorted (Needs to be addressed by Sony)
* Night Mode doesn't work (Needs to be addressed by Sony)
* The occasional battery drain (Same as with other custom oreo roms. Mine seem prevalent whenever cell reception is spotty)
If you come across any bugs, please feel free to report them here. I am not the developer, but our feedback might contribute to making a better eventual official version of this ROM.
Download:
https://androidfilehost.com/?w=files&flid=269311

harryharryharry said:
Obligatory disclaimer:
Code:
[SIZE="1"]/* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Preface:
Thanks in no small part to the awesome help from Tim Graham of the AOSPA-team, I was able to compile an unofficial build of Paranoid Android 8.0.0-DEV (Android 8.1)
for the Sony Xperia X Compact (kugo/f5321). I've been using it for a couple of days now without running into any (rom-specific) issues yet.
I've asked Tim if he didn't mind me posting the rom here and he gave the go ahead. So here we go!
Installation instructions:
* Backup important files beforehand just in case something goes awry.
* Wipe System, Cache and Data.
* Install zip-file with TWRP.
* Unzip and then flash Sony's ODM-image (v11) to the oem-partition using fastboot:
Code:
fastboot flash oem SW_binaries_for_Xperia_Android_8.1.6.4_r1_v11_loire.img
What works:
* Data (2G/3G/4G/LTE)
* Wifi
* GPS
* Bluetooth
* Fingerprint sensor
* Camera
* Torch
* GApps (Open GApps 8.1 pico)
* Magisk (16.4)
Known issues:
* Boot animation is partly distorted (Needs to be addressed by Sony)
* Night Mode doesn't work (Needs to be addressed by Sony)
* The occasional battery drain (Same as with other custom oreo roms. Mine seems prevalent whenever cell reception is spotty)
If you come across any bugs, please feel free to report them here. I am not the developer, but our feedback might contribute to making a better eventual official version of this ROM.
Download:
https://androidfilehost.com/?w=files&flid=269311
Click to expand...
Click to collapse
Thanks for keeping XC alive. I haven't been too interested in Android since finding Sailfish, (especially since there's been so little activity here), but might bounce back to check this out.

Has anyone already testet whether Car Bluetooth is working? Does encryption work?
Thanks for any replies in advance.

Encryption works. I can't say for sure car bluetooth works. The bluetooth devices I use (heart rate monitor and earbuds) do work though.

harryharryharry said:
Encryption works. I can't say for sure car bluetooth works. The bluetooth devices I use (heart rate monitor and earbuds) do work though.[/QUOTE
very good!!
Click to expand...
Click to collapse

Thread cleaned.
:good:

When tried to flash with TWRP (wiped everything beforehand), got the following error:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard1/pa_kugo-8.0.0-
DEV-20180507.zip'
Anyone know why this is happening?

Looks like the error is caused by the installation script checking if the rom is suitable for your device and concluding it isn't. What device are you flashing the rom to ?

Is the ROM source private?

No, the source is publicly available on github: https://github.com/AOSPA/manifest
NB: If anyone else is having problems with this rom, your best bet is to try the official rom - which I just saw has been released the 22nd of august:
http://get.aospa.co/official/kugo
I haven't tested the rom myself, but I'm willing to say it's the better choice overall since it is built more recently and therefore probably has a more up to date security patch level and so on.

harryharryharry said:
Looks like the error is caused by the installation script checking if the rom is suitable for your device and concluding it isn't. What device are you flashing the rom to ?
Click to expand...
Click to collapse
X Compact. The device it was supposed to be flashed on.

Hmm, that's strange. I think if you want to try out Paranoid Android, you're better off trying the official rom (which has been released a couple of days ago). If the same error message appears, all I can think of is maybe TWRP somehow doesn't report the correct brand/model of the phone..

Official rom looks good too.

I can't open my camera app. I'm using the official rom. Someone has this problem too?

Yes also the case for me (the screen stays black until I close the camera app), this wasn't the case with my unofficial build of the rom (although I tested with a much older version of the oem partition - I think version 11).
I'm not on the rom anymore because it was generally laggy and no music app would play music. I didn't bother to investigate further because for me the music app is pretty much essential in daily use and just needs to work.
If you want this worked out, your best bet is to contact the developers of the rom at their google plus page:
https://plus.google.com/communities/112514149478109338346
and under 'bug reports' provide them with a log (for example with matlog) for them to dissect.

Hi,
I habe recently flashed the official OA1 ROM of Paranoid Android for my Xperia X Compact and after it finally worked and it had booted I noticed some difficulties with the Bluetooth. It stops submitting the sound to various Bluetooth devices (headphone, music box) where this never happened before. (Side note: the 7.1.3. Official PA ROM features no bluetooth at all, at least not on my device.) Sometimes even the Bluetooth deactivated itself fully. After turning it back on, it would pair again but mostly after a few seconds stop delivering the sound to the devices. Is there a way to fix it? I'd love to hear your ideas to it.
Best
Calumet27
---------- Post added at 01:39 PM ---------- Previous post was at 01:23 PM ----------
harryharryharry said:
Yes also the case for me (the screen stays black until I close the camera app), this wasn't the case with my unofficial build of the rom (although I tested with a much older version of the oem partition - I think version 11).
I'm not on the rom anymore because it was generally laggy and no music app would play music. I didn't bother to investigate further because for me the music app is pretty much essential in daily use and just needs to work.
If you want this worked out, your best bet is to contact the developers of the rom at their google plus page
Hi,
was it due to lack of integration with the SD card? Because with mine in the official OA1, I do not have problems with the music directly, it plays (not m4a though), and I CAN show the contents of the SD card but other apps than the file manager cannot access the SD card. It is possible for me to play individual Songs via VLC though. I'd be thankful for your ideas in this.
Best
Calumet27
Click to expand...
Click to collapse

[ROM] [6.0.1] [UNOFFICIAL] LineageOS 13 for Homtom HT10

Hello,
Since I have not seen any custom ROM for this device and was unhappy with the stock rom I decided to port LineageOS to this device. It's a "dirty" port if you will (using those simple "porting guide" threads on XDA) and no kernel decompiling or anything more than copying and editing text files was done to make this ROM.
I ported a Vernee Apollo Light version of LineageOS 13 to this device because the hardware is very similar to that of the HT10. All credits go to the people who ported it to the Vernee Apollo Light, I just forgot which site I got it from (maybe from an XDA thread, maybe from other download sites, I can't remember).
I guess I made this thread in hopes of getting some other HT10 owners to try themselves as developers in order to have a bigger selection of custom ROMs for this device.
I am not responsible for any damage done to you, your device or anything that might be caused by downloading or flashing this rom to your device. Therefore this disclaimer:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
If you somehow brick your device, you can almost always save it using SPFlashtool, because it can flash to the device without even needing to turn the device on. So you can always flash the stock Homtom firmware even if the screen won't turn on.
Before flashing the ROM:
I recommend you flash this using TWRP, which is available for this device on the internet.
At least, wipe the following partitions before flashing:
- System
- Cache
- Dalvik Cache
After flashing my LineageOS ROM you can flash Magisk (at least the beta version 16.4), XPosed framework (systemless) and the ARISE sound mod (Biohazard sound mod worked for me as well, though you shouldn't install both. chose either one and stick with that). Those worked for me, though to get bluetooth audio working I had to flash a zip file containing APT-X and APT-X HD audio codec, and I had to install BTAudio in the XPosed Framework.
What works:
- the above mods/flashables
- WIFI
- Bluetooth (see fix above)
- video playback (youtube)
- telephony (dual sim and calling works, cellular network also works)
What doesn't work:
- camera
Have fun with LineageOS on this exotic device!
It's live now! Just go to the following link:
Download Link :- https://androidfilehost.com/?fid=11410963190603911454
Edit 2: DualbootPatcher works with the right configs:
If you add the following line to the dualbootpatcher's "devices.json" (just be sure to put a comma between the last entry and this one; I use Notepad++) you can patch this rom using the dualbootpatcher program (I used the windows program).
Code:
{"id":"HT10","codenames":["HT10"],"name":"Homtom HT10","block_devs":{"cache":["/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache","/dev/block/mmcblk0p28"],"system":["/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system","/dev/block/mmcblk0p27"],"base_dirs":["/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name"],"data":["/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata","/dev/block/mmcblk0p29"],"boot":["/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/boot","/dev/block/mmcblk0p21"],"recovery":["/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/recovery","/dev/block/mmcblk0p1"]},"architecture":"arm64-v8a","boot_ui":{"supported":true,"flags":["TW_QCOM_RTC_FIX"],"pixel_format":"RGBA_8888","max_brightness":255,"default_brightness":162,"graphics_backends":["fbdev"],"theme":"portrait_hdpi","brightness_path":"/sys/class/leds/lcd-backlight/brightness"}}
I was able to patch this rom as "primary" rom and flash the resulting zip. It booted just fine.
Edit: I made a pull request on Github to get this config incorporated in the official dualbootpatcher configs.
.