Update: So thanks for all the help guys, i just downloaded a firmware from Flashtool's XperiFirm and flashed it to 23.4.A.1.232, I'm just going to apply root and recovery and i'm set.
Hello, I was using a stock based 5.1 ROM when i tried to change the theme and the screen just went black i was receiving messages and stuff so i knew the ROM was working but it had no interface i tried waiting to no avail so i restarted the phone and saw the screen still black. Since i had just recently installed the ROM and did a SD and internal storage wipe for a fresh start, i just said screw it i'll just use my old twrp backup and booted into recovery HOWEVER before flashing the backup when i went to do "Advanced Wipe" i must have accidentally ticked the wrong thing because being a moron i restarted the phone and i suddenly had no recovery or rom. So now when i turn on the phone the only thing it's showing the Sony logo in the middle and "XPERIA" in the bottom.
I can still access fastboot and flash mode.
I started up fastboot and tried to flash the dual recovery kernel but i kept getting the "Command not allowed" error.
I used flashtool to Relock/Unlock my phone and still got the same error.
I re-installed all the drivers still the same error.
I tried different USB ports and cables.
I know i can flash a firmware using XperiFirm from flashtool, but my internet connection is slow, has frequent disconnects that restart the download and the ISP charges like 5$ for every Gb i download, also i dont like to wait a day to download a firmware that i'll change in a few hours.
If you can help me get twrp in my phone i'll be a happy camper , if not i'll just have to flash the firmware :|
Thanks in Advance, Dan
UPDATE: i made and ftf from a ROM i had laying around and flashed it with flashtool but i've still got the same issue with no improvement. I just cant get why fastboot flash commands arent working.
Hi There, need some help if you can...any educated and experienced help would be appreciated thanks.
After downloading my stock firmware and extracting via Huawei update Extractor all the image files ( System, user data, Cache, etc) I backed up oeminfo and cust files via Rayglobe Knife and saving the extracted update.app file to my dload folder on SDCard and successfully resetting my phone to factory using the vol+/- and power method I was quietly confident to make the jump and flash a rom the Android 7.0 (N) Nougat beta on Huawei posted by Somboons
I followed the instructions and dirty flashed this thru TWRP as instructed which seemed to go ok until I tried to reboot, the phone booted to stock recovery so I wiped Dalvik, Cache and Factroy reset, this completed and it all went down hill from there, basically now just stuck at boot screen saying that its about to reboot but never moves unless I use button combos
(OK so yes I feel stupid now and I'll beat myself up so you don"t have to, but I reallyt thought that I could always get back to stock via my SDCard)
What I can do...
Phone can only boot to eRecovery ( with WIFI failed message )
I can go into fastboot ( shows Bootloader and FRP unlocked)
What i can't do...
Cant access my update file on SDCard....Trying to boot using vol+/- and power to access my dload/update.app file on my SDCard just freezes at initial boot screen and tells me to push vol up button for 3 second and this takes me to eRecovery where all i can do is reboot or shut down.
I can't adb sideload files " no SU Binary detected"
What I've tried...
I have tried Rayglobe knife UNBRICK option placing my extracted boot, cust, system, recovery .img files but his fails with my PC popping up and saying this operation can't be performed on this PC please contact developer so this fails.
I then tried to fastboot flash all the image files which seemed to work successfully but no changes to the situation.
I have tried to fastboot flash the update.app which went thru the sparse process of all seven files and then come up with error command can not complete ( something in those words)
I have tried to fastboot new stock recovery from my rom as well as TWRP recovery but nothing works even if it says seems to have completed in the adb command prompt.
I have a feeling this is to do with the encryption of the rom and now my system cannot recognise my partition and without recovery I have no way of mounting my sdcard.
Thank god I have my old and reliable Lumia 1520 to fall back on untill I get this sorted.
Any Help would be appreciated....thanks in advance
Are you able to boot into Huawei recovery?
Mickie.C said:
Hi There, need some help if you can...any educated and experienced help would be appreciated thanks.
After downloading my stock firmware and extracting via Huawei update Extractor all the image files ( System, user data, Cache, etc) I backed up oeminfo and cust files via Rayglobe Knife and saving the extracted update.app file to my dload folder on SDCard and successfully resetting my phone to factory using the vol+/- and power method I was quietly confident to make the jump and flash a rom the Android 7.0 (N) Nougat beta on Huawei posted by Somboons
I followed the instructions and dirty flashed this thru TWRP as instructed which seemed to go ok until I tried to reboot, the phone booted to stock recovery so I wiped Dalvik, Cache and Factroy reset, this completed and it all went down hill from there, basically now just stuck at boot screen saying that its about to reboot but never moves unless I use button combos
(OK so yes I feel stupid now and I'll beat myself up so you don"t have to, but I reallyt thought that I could always get back to stock via my SDCard)
What I can do...
Phone can only boot to eRecovery ( with WIFI failed message )
I can go into fastboot ( shows Bootloader and FRP unlocked)
What i can't do...
Cant access my update file on SDCard....Trying to boot using vol+/- and power to access my dload/update.app file on my SDCard just freezes at initial boot screen and tells me to push vol up button for 3 second and this takes me to eRecovery where all i can do is reboot or shut down.
I can't adb sideload files " no SU Binary detected"
What I've tried...
I have tried Rayglobe knife UNBRICK option placing my extracted boot, cust, system, recovery .img files but his fails with my PC popping up and saying this operation can't be performed on this PC please contact developer so this fails.
I then tried to fastboot flash all the image files which seemed to work successfully but no changes to the situation.
I have tried to fastboot flash the update.app which went thru the sparse process of all seven files and then come up with error command can not complete ( something in those words)
I have tried to fastboot new stock recovery from my rom as well as TWRP recovery but nothing works even if it says seems to have completed in the adb command prompt.
I have a feeling this is to do with the encryption of the rom and now my system cannot recognise my partition and without recovery I have no way of mounting my sdcard.
Thank god I have my old and reliable Lumia 1520 to fall back on untill I get this sorted.
Any Help would be appreciated....thanks in advance
Click to expand...
Click to collapse
I have solved so
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
warsangel said:
I have solved so
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
A very big thanks ....this worked with no hitches except I now have no service now have to find unlock code for sim and get rid of the Ascend 7 splash screen that appears before the original Huawei Boot screen.?
After the above issues with thanks to warsangel's suggestion to use DC_Phoenix, I have managed to get my phone back up and running...got sim working so I now can detect my network and call and text using HCU client.
I now want to get rid of the annoying splash screen on bootup that shows Huawei Ascend spalsh screen before the mate 8 factory Huawei animated boot up screen. I still cannot access my dload folder on SDCard using vol-/+ and power button combo and if I dial in to manufacturers settings using*#*#2846579#*#* when i select upgrade from sd card i get a "PT failed do you still want to continue" if i click yes it re installs the firmware but makes no changes at all. Does any one have any other ideas. Of how to clear the splash screen and get the phone working back on Mate 8 button and bootup settings. Everything else works perfectly just a couple of things that will niggle at me...just want to get it back to out of the box as I have the Original Firmware zip file for this phone and region. cheers
bluheart said:
Are you able to boot into Huawei recovery?
Click to expand...
Click to collapse
Hi blueheart...no I can't, I think this is my problem, I can get to fast boot and I can't fastboot anything now because the boot loader is locked with a different code than the original one that I paid for with dc-unlocker. I have manged thru HCU cLIENT to get my original imei number and serial number but this serial number doesnt show up when I fastboot devices, lists one that come with the Phoenix firmware I flashed which is an Ascend as this was a NXT image closest to my NXT-L09.
My problem still is that I seem to go in to 2G and lose the signal all the time, I'm thinking I need to enter more details in CDMA repair in HCU Client or am I going about this the wrong way???
Oh bru, no idea!
HCU client is good enough. Keep trying dload if your bootloader is locked, it will flash for sure. Phone isn't easy to brick.
bluheart said:
Oh bru, no idea!
HCU client is good enough. Keep trying dload if your bootloader is locked, it will flash for sure. Phone isn't easy to brick.
Click to expand...
Click to collapse
Cheers Mate, managed to get to dload/update now but this doesnt seem to give a full reset, but modem is holding a signal but intermittently will drop into no service. I managed via HCU to re enter my imei and serial but a different serial number showsup in my settings still ??? getting back to where i need to but the signal dropping is a real problem. The next step is to try and get bootloader unlocked....any advice from any one.... if I fastboot flash modem will this be enough to bring my base band back or is there another file I should be looking at? cheers
You need to have cust and oem info of your own area for best signal
bluheart said:
You need to have cust and oem info of your own area for best signal
Click to expand...
Click to collapse
Thanks....I have my backup oeminfo it isnt a .img or .app file it just says oeminfo (type=file) can i fast boot this ? or do I have to use SRKtool as I don't want to unlock bootloader.
DC-Phoenix tool lets me fastboot .img files via backdoor and app files can I convert the oeminfo file to and .img file?
Cheers
How did you do the back up?
You can flash via fastboot
bluheart said:
How did you do the back up?
You can flash via fastboot
Click to expand...
Click to collapse
Backup was done through Rom Manager but the back up isn't an image it's a series of files like system.ext4, boot.emmc.win etc with MD5 info files. I've re-rooted device and tried to use rom manager to restore but when it boots to TWRP recovery nothing happens??? and I can't see any of the files if I go into the twrp folder on the SDcard because they aren't zip or img file.
My biggest problem even after doing full factory reset, wipe cache or install my original firmware update.app file, it doesn't seem to over write the image file that I used to recover my phone with the DC-Phoenix app, every thing indicates that it has been successful, but when I boot up,, It never goes to the stock setup mode where you would normally, choose your region, set your pin etc....it's like my install is only a shell or part of my install is not overwriting the dgtks firmware file I used which was a Huawei Ascend 7. The system re-defaults after rest to this firmware. Anyone help me to get rid of it and get back to my stock please?
I can use my stock update.app but it's not installing over the NXT AL10_M00A095_Factory_firmware_Android_6.0_EMUI_4.0.dgtks that I use ( this was the closest firmware that they had ) I think I need to format my whole system to ext4 ??? especially the partition that it storing this data that is preventing me to get my stock firmware back....any help or advice on this ...thanks
Yes format via Huawei recovery then flash
Or
Root and flash via TWRP after unzipping
bluheart said:
Yes format via Huawei recovery then flash
Or
Root and flash via TWRP after unzipping
Click to expand...
Click to collapse
just to update....I tried formatting and resetting all partitions to ext4 format most of the partitioning was successful with the exception of Systrem and Cust...TWRP would allow me to do these....I did numerous wipes via TWRP and Stock RECOVERY but unfortunately even with a full update.app via sdcard / dload folder and fastboot update.app (my firmware) via DC-Phoenix I couldn't seem to get a full factory stock install, same problems as discussed above and file system always goes to Encrypting screen and then I end up with the Ascend 7 screen and settings with obviously the wrong base band for my region. So I hate to admit defeat, but I've relocked bootloader, reset as much as I can and sent off to the Huawei Workshop to see if they can reset all the partitons back to normal.
Hahaha
Cool, let's see
bluheart said:
Hahaha
Cool, let's see
Click to expand...
Click to collapse
Update: well I dodged a bullet today....I sent my Mate 8 away 5 days ago to the Huawei tech support up the other end of the country and it arrived back today, back to stock and they replaced the main board with no cost to me at all. I was sure that they would call foul play and charge me but I obviously did such a number on the phone and then cleaned up all traces that they couldn't make that call lesson learn't and I see a few other people having similar problems with the Beta Nougat Rom....that you may need to post a big warning and send them to this posting so they are fair warned. I think this thread is done....I might just leave my phone alone and no tweaking for a while
Absolutely true!
XDA is not a playground for kids
You need courage to keep the Mate's balls on fire and get burnt with the nuclear reactions while keeping the blame on self
I relocked my bootloader so i can unlock it again because TWRP refused to install on my Mate 8 after i upgraded it to Nougat. However, whenever i try setting up my phone and reach the wifi set up part, the keyboard doesn't show up. Instead, it only shows me the google voice keyboard and no buttons for me to type with. And when i try skipping that phase, it gets stuck on the "Checking Info" for hours on end. I'm in dire need of help. How do i get the stupid keyboard to function properly.
Did you try to install again the firmware via dload method on the external SD? If you do it, you make the factory reset at the end.
I faced same problem after installing nougat
I did the following to fix the problem
Dload stock firmware b320
Unlock my bootloader
Flash twrp recovery
Wip date (yes)
Fastboot to flash insecure boot.img for b320
Twrp to flash two files for b560
Update.zip & update data _all
Noting that u must flash the 2nd file data_all
Cause its include all google apk like keyboard
And Bluetooth file
After flashing both file do factory reset
Restart ur phone it will take 5min to reboot
Thanks
Hello, today while trying to get back to stock i wierdly bircked my honor 8
I flashed the stock recovery and stock boot img
Then i flashed a rollback package and a marshmallow package which i used for this same thing before.
Now the phone didnt start for a solid 30 minutes and ive decided to reflash the rollback and marshmallow package, but after i flashed the rollback got stuck at the boot logo, not even the stock bootanimation showing up.
The phone doesnt reboot neither in any of the recoveries nor in bootloader.
Any help would be appreciated.
Stephen
It will be tricky if you haven't at least access to fastboot :/
I think the best thing to do is to flash another ROM, use the dload method again and again because apparently that's all you have
You can also take a look at DC unlocker, it may resolve your issue
Have you managed to fix the phone ?
Not yet, i will try again tho in a few hours with the dload method, by flashing stock boot img then using rollback and then marshmallow firmware.
Don't forget that you need a stock BOOT.IMG and Recovery.img to perform dload method
I have a question,
Is it possible to switch the Huawei Phone Finder on or off on the phone, or can you switch it off via the homepage?
Has anyone ever tried this by chance?
The Problem:
After root again Emui 9 my Phone not boot only Bootloops.
In Erecovery find no Package for my Phone and Dload Method does not work.
I can´t flash any img File in Bootloader or i can flash twrp or Stock Recovery,command not allowed.
Not even DC Phoenix can help me.
Phone Finder is activated and that's why I can not flash img files.
That's why the question
Nothing?
i solved the Problem,reboot after 1000 times, it eventually booted to recovery.
Then I could do a data reset.
The whole thing was very nerve-racking.
But luckily it works again