After I replaced the screen of my Samsung Galaxy S8,
I wasn't able to put in my sim tray in anymore. Because of that, I cut of the bottom of the sim card tray, so I was again to put in the sim card tray but from there on had to tape on my sim card. After I to put in a sd card, I wasn't able to push into the hole for the sim-ejecting tool, so I had to pull it out very hardly. After I put a sd-card in, the phone didn't detect the sd-card. I tried everything, but nothing works. Can someone helps me or explain me why it is like that? Thanks a lot
Related
Here is an inside look that the Gtablet. I only took the back cover off. Battery is a 3650mAh, 7.4V, 27.0Wh, looks easy to replace if needed. Two missing components. There is a switch in the middle of the unit, when powered up if I press the switch, the unit resets with no data loss that I can tell. The board Rev is 7265C dated 2010-08-06 VER2.0. As fo the SIM card slot, there is a spot for it, but it is empty, and it dos not look like you could easily modify it to add the slot, and chance are the missing components may be for the SIM card/phone capabilities. Wish I could compare this to the 1GB model with the SIM card slot to see the diffs. Enjoy the pics...
There's been some discussion about the SIM card (and possibility of adding lighted buttons):
http://forum.xda-developers.com/showthread.php?t=842354
Hi Everyone, has anyone tried to crack open and put in a sim card as shown here: techrepublic "Cracking Open the HP Touchpad" I can't post a link as I am a new user, but will post it in 8 hours when I get permission.
Would love to know if anyone has this working or has at least tried it.
Here is the link
www . techrepublic . com/photos/cracking-open-the-hp-touchpad/6253940
mine has a sim card slot i can actually pop out???
What do you mean? You can actually put in a sim card in the slot? If so, have you tried putting in a sim card? Did it register a Network provider?
Are you sure you are not just talking about the "serial number" that pops out, but is blocked (no space for a sim card)
yes it should pop out
Perhaps you accidentally bought the Touchpad 4G? That ought to have a SIM slot.
??????
Did you try to put a sim card in the slot, or are you simply referring to the "serial number" pop out. They are not the same.
If you did put a sim card in, did it work?
I see what youre talking about in those pictures, but it doesnt look like it has any sort of electrical connection going to it.
i bought a t959v with cracked screen for main board. i have a new lcd replacment screen. when i put it together and turn it on i try to make a call it says not registered on network also not seeing any internet signal but is showing full 4 bars for reception .when i hit software update it says DM initialization not ready check nrtwork or sim card. i know sim card is good because i just took it from another t959v. is there a way to check reader . thinking it might be bad.called t mobile and had phone registered. is it easy to swap out sim reader. thanks. ps i swaped a main board out like this once before and it conected with no problem
try reseating the simcard part (requires unscrewing and removing the back). While the part is removed, check all the pins to make sure they are connected right.
Sim card is in phone without tray how can I take back cover off? I have a 16gb
Use Google to search what you're looking for before creating a thread, there are video tutorials.
Hi there!
So i got a NEXUS 5 32GB.
Short story: i had an old SIM card, like 5-10 year old, when i bought the phone. I cut the card into microsim, and worked like a charm. (You know, nexus stuff when no service sometimes like once in a week (restart solved always the problem)). Now i contracted with a new service provider, and the (3in1) micro sim i get is unreadable to the phone.
Detials:
-The new card working in other phones without problem.
-I went to my carrier and get a new sim card, doesnt work either. (so the sim card(s) not defected)
-Tried different SIM cards in my phone-> working only the old SIM cards, new micro sims doesnt
-Tried almost every softwere stuff, (factory reset, FR in recovery mode, flashing 4.4 android, flashing other androids, flashed radio files etc.etc) ->non of them worked.
-We disassembled the phone, the sim reader is looking perfect, not a scratch, all pins in order etc.
-THE MAIN problem: however i insert the new card(s), phone says only "No sim card, emergency call only". Can't even set up the mobile services, nothing. Only can turn on-off the NFC, Airplane mode etc.
-When inserting the old cutted card, works perfectly.
I'm paying now for 2month for the new card, but can't use it....
Please help me!!!
Any kind of help will be appreciated.
Thank you very much.
Have a nice day.
PS.: Sorry for my english, i'm from Hungary.
bump