Database Info

urgent help no signal wrong kernel flashed

plz friends i by mistake flash wrong kernel for the device and now i try everything and iv got no signal nothing
i did again clean flash and not working what can i do? plz

bubu23 said:
plz friends i by mistake flash wrong kernel for the device and now i try everything and iv got no signal nothing
i did again clean flash and not working what can i do? plz
Click to expand...
Click to collapse
plz any help ??? i have no reciption i flash sprint kernel to g925f mobile

Kernel got nothing to do with signal.
Sent from my SM-G920T

ambervals6 said:
Kernel got nothing to do with signal.
Sent from my SM-G920T
Click to expand...
Click to collapse
plz people i can see my imei like 350000000000000000000 it looks not good so i have no reciption
it cant find the network register what can i do????
i did clean stock rom now waiting to solution

bubu23 said:
plz people i can see my imei like 350000000000000000000 it looks not good so i have no reciption
it cant find the network register what can i do????
i did clean stock rom now waiting to solution
Click to expand...
Click to collapse
Hello, I had sent you a message to try and help as much as I could but you opened a thread so I'll help you on here.
First. Double check all twrp folders using a file Explorer. Some roms when flashed through twrp automatically back up your efs partition.
Second. If the folders are blank then we'll proceed to try other methods of fixing your imei.
I assume since you went from having a blank imei to that weird number you tried one of the methods you found through Google.
There are ways to manually reenter your imei if the methods found on Google fail. Follow the instruction in the site below (I highly suggest using the terminal emulator method) and report back here. Your imei can be found on your Sim card or the bigger card your Sim came in.

Flash with stock 5.1.1 ROM via odin.
http://www.sammobile.com/firmwares/database/SM-G925F/

roydok said:
Flash with stock 5.1.1 ROM via odin.
http://www.sammobile.com/firmwares/database/SM-G925F/
Click to expand...
Click to collapse
i flashed all ready i was on 5.1.1

drock212 said:
Hello, I had sent you a message to try and help as much as I could but you opened a thread so I'll help you on here.
First. Double check all twrp folders using a file Explorer. Some roms when flashed through twrp automatically back up your efs partition.
Second. If the folders are blank then we'll proceed to try other methods of fixing your imei.
I assume since you went from having a blank imei to that weird number you tried one of the methods you found through Google.
There are ways to manually reenter your imei if the methods found on Google fail. Follow the instruction in the site below (I highly suggest using the terminal emulator method) and report back here. Your imei can be found on your Sim card or the bigger card your Sim came in.
Click to expand...
Click to collapse
there is no site below where?

Nothing is gonna work guys.your efs imei is damaged now.do you have an efs backup.if you have restore it

mariolcela said:
Nothing is gonna work guys.your efs imei is damaged now.do you have an efs backup.if you have restore it
Click to expand...
Click to collapse
i dont have backup efs

If it's illegal, then it doesn't belong here. End of story.
Get your phone to Samsung for repair, it'll cost but they might fix it

Anyway try to flash many stock fw like btu etc it should fix this issues & try latest modem too ok anyway my friend always after rooting device just backup efs ..
Sent from my SM-G925F using Tapatalk

You can try flashing this updated French stock 5.1.1 ROM via odin. The very latest.
http://www.sammobile.com/firmwares/download/51274/G920FXXU2BOG8_G920FOXA2BOG8_XEF/

thx my friend but i install my country latest and it still same can i try more and more and maybe it will be ok with one of them?
cause if 1 not good everything same no?
update: i have g925f

thereassaad said:
Anyway try to flash many stock fw like btu etc it should fix this issues & try latest modem too ok anyway my friend always after rooting device just backup efs ..
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
you say like btu what is btu?

bubu23 said:
you say like btu what is btu?
Click to expand...
Click to collapse
Btu for united Kingdom its best stock rom just try it my friend
Sent from my SM-G925F using Tapatalk

mythos234 said:
If it's illegal, then it doesn't belong here. End of story.
Get your phone to Samsung for repair, it'll cost but they might fix it
Click to expand...
Click to collapse
This right here.
I have cleaned this thread, and I don't want to see any posts about IMEI modifying or anything illegal here.
You can try stock flashing, rebuilding an EFS partition somehow (probably impossible) or repair shop, but any talk of anything illegal and the moderators will take action on your account.
Thanks.

Have you tried searching for a Galaxy s6 efs repair script?

If nothing has worked you definitely need to go with a repair shop. Either a third party repair or try to warranty replace your phone through Samsung. If you go the Samsung route Odin flash 100% stock firmware then send it in to them and see what they say

yeh i boght new s6 edge lolllllll bbut i i learned to back up

SM-G920I No service.

Hi, I had my S6 on android 5.0.2, carrier version, rooted and unlocked (with a imei which corresponded to a nokia after unlocking). The phone worked fine, I had service, I could make calls, etc... I decided to flash stock unbranded marshmallow on it, so I downloaded the firmware from sammobile and flashed it. Everything went right except I didnt have service (No service). I went desperate, I flashed modems, read thousands of threads, but nothing. Any suggestions?

lukesvw said:
Hi, I had my S6 on android 5.0.2, carrier version, rooted and unlocked (with a imei which corresponded to a nokia after unlocking). The phone worked fine, I had service, I could make calls, etc... I decided to flash stock unbranded marshmallow on it, so I downloaded the firmware from sammobile and flashed it. Everything went right except I didnt have service (No service). I went desperate, I flashed modems, read thousands of threads, but nothing. Any suggestions?
Click to expand...
Click to collapse
Go to settings ,about phone and see if you can find the following things.
1)baseband version
2)your phones imei number
Is anything i listed missing in your phone

[email protected] said:
Go to settings ,about phone and see if you can find the following things.
1)baseband version
2)your phones imei number
Is anything i listed missing in your phone
Click to expand...
Click to collapse
Hi, I found them:
Baseband:
IMEI:

lukesvw said:
Hi, I found them:
Baseband: xxxxx....
IMEI: xxxxxx
Click to expand...
Click to collapse
When you flash your device you may loss your Imei number so you won't be getting service .but looks like you haven't lost it (provided you found them in the the settings option and not from the box which you got your phone from)
Look for a baseband fix for your phone in the site you got your ROM.
PS edit your previous post and delete your imei no.
I was just asking if it was there .

Ok, thanks alot. What would be a baseband fix?

lukesvw said:
Ok, thanks alot. What would be a baseband fix?
Click to expand...
Click to collapse
Just a zip file of the baseband version that needs to flashed through recovery so the phone can get service
Edit: Your baseband version is OK as well.
Share the link where you got the rom pls .
Also try a normal reboot if you haven't tried it yet.
Update : you sure you can't make calls ,my marshmallow says no service(unless I haven't turned on cellular data) but I can make calls
.if nothing's working share the site which you got the rom from

I got it from: http://www.sammobile.com/firmwares/download/71371/G920IDVS3EPE2_G920IUUB3EPD2_CHO/
Thanks alot for the help, keep it up.

lukesvw said:
I got it from: http://www.sammobile.com/firmwares/download/71371/G920IDVS3EPE2_G920IUUB3EPD2_CHO/
Thanks alot for the help, keep it up.
Click to expand...
Click to collapse
Ive tried rebooting and Ive checked if moibile data is turned on, but no luck.
Sorry, I didnt understand well, you asked me to flash a baseband (which I did not find), then you edited saying that my baseband is OK. So what do I do?

Would installing twrp, and flashing a costum rom fix it? Or should I download the stock rom from another website?

lukesvw said:
Would installing twrp, and flashing a costum rom fix it? Or should I download the stock rom from another website?
Click to expand...
Click to collapse
You have both imei and baseband okay so it's the ROMs fault.
Try another one
http://forum.xda-developers.com/galaxy-s6/development/rom-aterminatorg920f3zpa1m-6-0-11-0b-t3295183

Thanks so much, tomorrow Il flash the rom, but im planning to flahs XtreStoLite instead. Il post my results.

[email protected] said:
You have both imei and baseband okay so it's the ROMs fault.
Try another one
http://forum.xda-developers.com/galaxy-s6/development/rom-aterminatorg920f3zpa1m-6-0-11-0b-t3295183
Click to expand...
Click to collapse
Im sorry for the long time, I flashes VN ROM and XtreStoLite but nothing. Im back with stock. Im not surw if you read that my imeis dont match (*#06# and the one at the back)

lukesvw said:
Im sorry for the long time, I flashes VN ROM and XtreStoLite but nothing. Im back with stock. Im not surw if you read that my imeis dont match (*#06# and the one at the back)
Click to expand...
Click to collapse
Then you have to flash your imei . i think sn tools was the tools name or try another.

[email protected] said:
Then you have to flash your imei . i think sn tools was the tools name or try another.
Click to expand...
Click to collapse
Ok, ill flash it. Thanks alot.

lukesvw said:
Ok, ill flash it. Thanks alot.
Click to expand...
Click to collapse
[email protected]
Hey, I researched alot and apparently there is no such thing to flash an IMEI. I now I can restore EFS folder, but I have no backup at all. I will continue to try everything, as my case is very frustrating and strange....

[email protected] said:
Then you have to flash your imei . i think sn tools was the tools name or try another.
Click to expand...
Click to collapse
Hey, I researched alot and apparently there is no such thing to flash an IMEI. I now I can restore EFS folder, but I have no backup at all. I will continue to try everything, as my case is very frustrating and strange....

lukesvw said:
Hey, I researched alot and apparently there is no such thing to flash an IMEI. I now I can restore EFS folder, but I have no backup at all. I will continue to try everything, as my case is very frustrating and strange....
Click to expand...
Click to collapse
I used sn write tool to flash my imei but I think that's only for mtk devices

[email protected] said:
I used sn write tool to flash my imei but I think that's only for mtk devices
Click to expand...
Click to collapse
Yes, it is only for mtk devices. I will try and flash xtrestolite, then root and flash xposed framework and finally install the imei changer from xposed.

lukesvw said:
Yes, it is only for mtk devices. I will try and flash xtrestolite, then root and flash xposed framework and finally install the imei changer from xposed.
Click to expand...
Click to collapse
Okay good luck:good: and also ask your fellow users on the phones thread ,the ones having the same phone can help you better .

[email protected] said:
Okay good luck:good: and also ask your fellow users on the phones thread ,the ones having the same phone can help you better .
Click to expand...
Click to collapse
Thank you. There are very little people with my problem.

Stock Bootloader

Does anyone know where I can get just the stock bootloader image to flash via TWRP?
Long story short I F'd up my bootloader and now Odin will not flash a stock BL file do to a version mismatch and to make matters worse I can't find a way to restore to stock baseband so my network isn't working. If someone can share a backup that'd be super
EDIT: Forgot to specify I need it from a TMobile variant (J700T) for firmware APK6 or APK3 (Odin doesn't seem to want to flash the stock BL from my Odin ROMs perhaps because there is a version mismatch in the phone?)

NullaVisus said:
Does anyone know where I can get just the stock bootloader image to flash via TWRP?
Long story short I F'd up my bootloader and now Odin will not flash a stock BL file do to a version mismatch and to make matters worse I can't find a way to restore to stock baseband so my network isn't working. If someone can share a backup that'd be super
EDIT: Forgot to specify I need it from a TMobile variant (J700T) for firmware APK6 or APK3 (Odin doesn't seem to want to flash the stock BL from my Odin ROMs perhaps because there is a version mismatch in the phone?)
Click to expand...
Click to collapse
download latest stock rom at sammy..

Already tried. Looks like I am officially a victim of a partial brick (Odin wont flash BL because it thinks I'm downgrading and I have no Baseband/network) I'll try and see what I can do through TWRP since I can still flash that through Download mode. I made no backups myself but would restoring another TWRP backup solve it perhaps?

NullaVisus said:
Already tried. Looks like I am officially a victim of a partial brick (Odin wont flash BL because it thinks I'm downgrading and I have no Baseband/network) I'll try and see what I can do through TWRP since I can still flash that through Download mode. I made no backups myself but would restoring another TWRP backup solve it perhaps?
Click to expand...
Click to collapse
try flash custom rom after that flash stock rom..

khaisttj92 said:
try flash custom rom after that flash stock rom..
Click to expand...
Click to collapse
No dice my dude. However, I did find something else
Turns out when I check the bootloader version it reads J700T1UVU3AQC3. Sure enough there was a baseband update and security update a few days ago and my device must've installed it while I was asleep. This would explain why my baseband is broken AND why Odin doesn't want me to flash the APK6 Bootloader.
So there's good news and bad news. The good news is there is hope but the bad news is I am currently at the mercy of whenever someone decides to upload this firmware on the internet (if anyone does that is)

NullaVisus said:
No dice my dude. However, I did find something else
Turns out when I check the bootloader version it reads J700T1UVU3AQC3. Sure enough there was a baseband update and security update a few days ago and my device must've installed it while I was asleep. This would explain why my baseband is broken AND why Odin doesn't want me to flash the APK6 Bootloader.
So there's good news and bad news. The good news is there is hope but the bad news is I am currently at the mercy of whenever someone decides to upload this firmware on the internet (if anyone does that is)
Click to expand...
Click to collapse
sorry dude i cant help u because im using f variant..

khaisttj92 said:
sorry dude i cant help u because im using f variant..
Click to expand...
Click to collapse
Thanks anyways my dude

NullaVisus said:
Thanks anyways my dude
Click to expand...
Click to collapse
your welcome..

NullaVisus said:
No dice my dude. However, I did find something else
Turns out when I check the bootloader version it reads J700T1UVU3AQC3. Sure enough there was a baseband update and security update a few days ago and my device must've installed it while I was asleep. This would explain why my baseband is broken AND why Odin doesn't want me to flash the APK6 Bootloader.
So there's good news and bad news. The good news is there is hope but the bad news is I am currently at the mercy of whenever someone decides to upload this firmware on the internet (if anyone does that is)
Click to expand...
Click to collapse
You are lucky because you at least have a functioning bootloader and a working TWRP. You are unlucky because AQC3 firmware is not available publicly yet. In any case, bootloader cannot be flashed in TWRP as far as I know. Your only option is to get your missing ACQ3 partitions from someone else's back up. IF you have messed up your EFS partition though you are out of luck.
So exactly what partitions do you need? I may be able to give you those partitions if I have a personal backup of those from the past. Right now I have modified so many things that a current copy of my partitions will probably do you more harm than good.

najoor said:
You are lucky because you at least have a functioning bootloader and a working TWRP. You are unlucky because AQC3 firmware is not available publicly yet. In any case, bootloader cannot be flashed in TWRP as far as I know. Your only option is to get your missing ACQ3 partitions from someone else's back up. IF you have messed up your EFS partition though you are out of luck.
So exactly what partitions do you need? I may be able to give you those partitions if I have a personal backup of those from the past. Right now I have modified so many things that a current copy of my partitions will probably do you more harm than good.
Click to expand...
Click to collapse
As far as I know I just need a main system.img backup
Edit; to specify, if I was flashing with Odin it would be what I would put in the AP slot
The phone in its current state is extremely slow and buggy. My intuition tells me that the older Android version does NOT like the new fiirmware (The bootloader is also where the firmware/device config info is stored IIRC)

NullaVisus said:
As far as I know I just need a main system.img backup
Edit; to specify, if I was flashing with Odin it would be what I would put in the AP slot
The phone in its current state is extremely slow and buggy. My intuition tells me that the older Android version does NOT like the new fiirmware (The bootloader is also where the firmware/device config info is stored IIRC)
Click to expand...
Click to collapse
I can give you a system image but you will have to flash it in TWRP.

najoor said:
I can give you a system image but you will have to flash it in TWRP.
Click to expand...
Click to collapse
Thats fine. I already know how

NullaVisus said:
Thats fine. I already know how
Click to expand...
Click to collapse
Well lucky me Ive got a similar situation though I reflashed with a 3-part HOME file from sammobile to unroot/unTWRP, but did so not realizing the darn BL wasnt included. Lucky for me my build versions matched, so Odin flashed flawlessly, the device boots as if it were brand new, stock recovery and all, everything functions/boots as it should, splash, factory setup, TMobile network works fine etc - only problem is both SafetyNet tests fail, so Google wont let me use use Android Pay and every other payment app that hooks into their API shuts me out. I also noticed a lightning-fast error right before going into the bootloader if you boot from the stock recovery (its so fast I need to capture the log to see what it is).
Any suggestions on where to find a BL to go with my J700T & assuming I find one, any nuances I should be aware of when flashing so as to avoid a potential brick situation?
FYI I flashed with the below from sammobile (and yes I was already at AQF1).
J700TUVS3AQF1_J700TTMB3AQF1_J700TUVS3AQF1_HOME.tar

rawkahn said:
Well lucky me Ive got a similar situation though I reflashed with a 3-part HOME file from sammobile to unroot/unTWRP, but did so not realizing the darn BL wasnt included. Lucky for me my build versions matched, so Odin flashed flawlessly, the device boots as if it were brand new, stock recovery and all, everything functions/boots as it should, splash, factory setup, TMobile network works fine etc - only problem is both SafetyNet tests fail, so Google wont let me use use Android Pay and every other payment app that hooks into their API shuts me out. I also noticed a lightning-fast error right before going into the bootloader if you boot from the stock recovery (its so fast I need to capture the log to see what it is).
Any suggestions on where to find a BL to go with my J700T & assuming I find one, any nuances I should be aware of when flashing so as to avoid a potential brick situation?
FYI I flashed with the below from sammobile (and yes I was already at AQF1).
J700TUVS3AQF1_J700TTMB3AQF1_J700TUVS3AQF1_HOME.tar
Click to expand...
Click to collapse
The bootloader is always included with the firmware and is most certainly included with the firmware you posted.
Safetynet probably fails because you need to factory reset.

Honor 8 stolen and flashed

Hello, guys i need your help here. My 2 week old Honor 8 was stolen by thief. Police retrieved the phone and I got it back. Problem is that the thief did something to the phone and tried to remove/replace IMEI and ROM so he wouldnt be tracked down by police, which obviously didnt help him. Now i got my phone back and there is writing " This phone is unlocked and cannot be trusted" everytime i reboot it, but it loads at least. I tried to flash the phone with Rollback and stock firmware from hihonor.com website but without luck. Flashing stops at 5% saying version mismatch or something like that.
2 more cents:
1. About phone shows 2 different IMEIs
2. Version number shows: FRD-C900B120
I would like my phone back to stock firmware without root or anything, i dont need that.
Can anyone help me out here? Thanks a lot!

Hi, i had your problem, stuck at 5% and here (in another thread) some people helped me, so i'm telling you what i did hoping i can help you too.
Update process:
First of all be sure to download the firmware updated (Marshmallow) http://download-c.huawei.com/download/downloadCenter?downloadId=92125&version=360419&siteCode=it-h
After the download is finished:
1. Make a backup, then format your External SD card from your PC (FAT32 should be fine)
1. Unzip (just extract) the update.zip and you should have "UPDATE.APP". Transfer this file to the SD card into the dload folder (if folder is not present, create it yourself). Pay attention, when i did this i haven't any file on the formatted sd card, so do this before transfer anything else
2. In the dialer app, enter the combination *#*#2846579#*#* and select "Software Upgrade" to make the updating process from SD start
3. If everything goes fine but the phone does not boot (bootloop on Honor logo), enter to recovery and wipe data and cache
I think that there is no need to use the rollback package as you weren't on a new software, so just download this firmware and you should be fine flashing it.
P.S The firmware i linked is for model FRD-L09, as i don't know where to find yours. If your phone is European version, then you can download and try to install it. After all, when the phone boots you can update to Nougat via OTA to B380 firmware if you want. Let me know if you succede

It did not help unfortunately. I downloaded the zip, extracted and moved dload with .app in it to formated SD card. dialed the number, selected the package, phone rebooted to twrp and nothing happend. so I turned it off and tried (+ - power button) install, it started installing but after 5% it says "Incompatibility with current version. Please download the correct package." and reboot system now. Same outcome as with rollbackers before
dunno whats my correct version tbh, "About phone" shows under Model: FRD and under Version: FRD-C900B120. thats all i got. btw I live in czech rep.

Aiwon said:
It did not help unfortunately. I downloaded the zip, extracted and moved dload with .app in it to formated SD card. dialed the number, selected the package, phone rebooted to twrp and nothing happend. so I turned it off and tried (+ - power button) install, it started installing but after 5% it says "Incompatibility with current version. Please download the correct package." and reboot system now. Same outcome as with rollbackers before
dunno whats my correct version tbh, "About phone" shows under Model: FRD and under Version: FRD-C900B120. thats all i got. btw I live in czech rep.
Click to expand...
Click to collapse
Okay, shouldn't have rebooted to twrp.. But if manually update fails maybe it's the case to try with the correct firmware. If you can find the firmware wich begins with FRD-L09C40 (wich belongs to Czech Republic) you can retry the update process. I searched around the web but found anything (maybe because i'm in italy, idk) but you can try to search in another thread here on xda. I saw a list of original firmware if i'm not wrong. You can try see there or ask them if they can provide a link for the correct firmware you need. Sorry if i can't help anymore

Aiwon said:
It did not help unfortunately. I downloaded the zip, extracted and moved dload with .app in it to formated SD card. dialed the number, selected the package, phone rebooted to twrp and nothing happend. so I turned it off and tried (+ - power button) install, it started installing but after 5% it says "Incompatibility with current version. Please download the correct package." and reboot system now. Same outcome as with rollbackers before
dunno whats my correct version tbh, "About phone" shows under Model: FRD and under Version: FRD-C900B120. thats all i got. btw I live in czech rep.
Click to expand...
Click to collapse
FRD-C900. Hmm I never saw anything like this before. Any thoughts @gopinaidu77?
Sent from my Honor 8 using XDA Labs

Aiwon said:
It did not help unfortunately. I downloaded the zip, extracted and moved dload with .app in it to formated SD card. dialed the number, selected the package, phone rebooted to twrp and nothing happend. so I turned it off and tried (+ - power button) install, it started installing but after 5% it says "Incompatibility with current version. Please download the correct package." and reboot system now. Same outcome as with rollbackers before
dunno whats my correct version tbh, "About phone" shows under Model: FRD and under Version: FRD-C900B120. thats all i got. btw I live in czech rep.
Click to expand...
Click to collapse
I can help bud . But before plz answer few of my questions.so that i can get a clear view if ur issue

If bootloader is unlocked, there should be no problem with flashing it via adb manually or TWRP.
If this fails, there is always a way how to fix it, with DC-Phoenix.

netvorCZEK said:
If bootloader is unlocked, there should be no problem with flashing it via adb manually or TWRP.
If this fails, there is always a way how to fix it, with DC-Phoenix.
Click to expand...
Click to collapse
Don't need DC anymore. Bootloader is already unlocked.
Sent from my Honor 8 using XDA Labs

gopinaidu77 said:
I can help bud . But before plz answer few of my questions.so that i can get a clear view if ur issue
Click to expand...
Click to collapse
sure, what would you like to know?

BL unlocked then flash through ADB.

Aiwon said:
Hello, guys i need your help here. My 2 week old Honor 8 was stolen by thief. Police retrieved the phone and I got it back. Problem is that the thief did something to the phone and tried to remove/replace IMEI and ROM so he wouldnt be tracked down by police, which obviously didnt help him. Now i got my phone back and there is writing " This phone is unlocked and cannot be trusted" everytime i reboot it, but it loads at least. I tried to flash the phone with Rollback and stock firmware from hihonor.com website but without luck. Flashing stops at 5% saying version mismatch or something like that.
2 more cents:
1. About phone shows 2 different IMEIs
2. Version number shows: FRD-C900B120
I would like my phone back to stock firmware without root or anything, i dont need that.
Can anyone help me out here? Thanks a lot!
Click to expand...
Click to collapse
Wow this is incredible . U can still retrieve your phone

gopinaidu77 said:
Wow this is incredible . U can still retrieve your phone
Click to expand...
Click to collapse
He was aking you bro what you would like to know.
Sent from my Honor 8 using XDA Labs

adriansticoid said:
He was aking you bro what you would like to know.
Click to expand...
Click to collapse
Plz a bit time

gopinaidu77 said:
Who ?
Click to expand...
Click to collapse
me?
i dont know what else to do, dunno how to flash it thru adb. No idea what my original version of the phone was/is

Aiwon said:
me?
i dont know what else to do, dunno how to flash it thru adb. No idea what my original version of the phone was/is
Click to expand...
Click to collapse
Can i know the phone model ?

gopinaidu77 said:
Can i know the phone model ?
Click to expand...
Click to collapse
Honor 8
dunno whats my correct version tbh, "About phone" shows under Model: FRD and under Version: FRD-C900B120
is this what you mean?

Aiwon said:
Honor 8
dunno whats my correct version tbh, "About phone" shows under Model: FRD and under Version: FRD-C900B120
is this what you mean?
Click to expand...
Click to collapse
Alright bro,it is what i mean . Can u access fastboot ?
Aiwon said:
Honor 8
dunno whats my correct version tbh, "About phone" shows under Model: FRD and under Version: FRD-C900B120
is this what you mean?
Click to expand...
Click to collapse
Plz reply can u access fastboot ? If u don't know u can say it no !! I will help u what so ever , but be frnly and no need to be shy!

gopinaidu77 said:
Alright bro,it is what i mean . Can u access fastboot ?
Plz reply can u access fastboot ? If u don't know u can say it no !! I will help u what so ever , but be frnly and no need to be shy!
Click to expand...
Click to collapse
yes i can im in fastboot&rescue mode connected to pc atm. display also says Phone unlocked

Aiwon said:
yes i can
Click to expand...
Click to collapse
Goodone bro .. give me two minutes . Can you wait ?plz
Aiwon said:
yes i can im in fastboot&rescue mode connected to pc atm. display also says Phone unlocked
Click to expand...
Click to collapse
Hi @Aiwon , plz download this.
After u had updated kindly report back i wil tell u what to do.
Kindly follow instructions as said , am pretty sure ur device works back.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v62122/f1/full/update.zip

gopinaidu77 said:
Goodone bro .. give me two minutes . Can you wait ?plz
Hi @Aiwon , plz download this.
After u had updated kindly report back i wil tell u what to do.
Kindly follow instructions as said , am pretty sure ur device works back.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v62122/f1/full/update.zip
Click to expand...
Click to collapse
Im sorry i cant download it, "page cannot be reached"

Baseband and IMEI info of J7 2016 (SM-J710FN) accidentally wiped

Hi guys,
I happened to accidentally wipe the system partition on my J7 2016 (SM-J710FN) through TWRP during a botched rooting attempt. After noticing that the phone didn't boot up subsequently, I managed to flash a stock ROM via ODIN as given in the below thread.
https://forum.xda-developers.com/ga...7-2016-stock-rom-build-date-7th-t3515491/amp/
Now the phone boots up fine, but does not connect to any cellular network as the Baseband and IMEI information shows up as 'Null' in the 'About Device'. And I did not have a backup of the 'efs' folder too.
I took the phone to a Samsung Service center, but the service guy said that since the Baseband information is lost there is no other option other than replacing the motherboard. It kind of sounded lame as this is evidently just a software issue, and the device works perfectly in every other way.
I attempted the 'Emergency firmware install' option via Smart Switch, but the tool does not recognize my device even after the manual entry of Model Name and Serial Number.
Is there some other way I could try to get this issue fixed? Any help or suggestion would be much appreciated. Thanks!

trabant123 said:
Hi guys,
I happened to accidentally wipe the system partition on my J7 2016 (SM-J710FN) through TWRP during a botched rooting attempt. After noticing that the phone didn't boot up subsequently, I managed to flash a stock ROM via ODIN as given in the below thread.
https://forum.xda-developers.com/ga...7-2016-stock-rom-build-date-7th-t3515491/amp/
Now the phone boots up fine, but does not connect to any cellular network as the Baseband and IMEI information shows up as 'Null' in the 'About Device'. And I did not have a backup of the 'efs' folder too.
I took the phone to a Samsung Service center, but the service guy said that since the Baseband information is lost there is no other option other than replacing the motherboard. It kind of sounded lame as this is evidently just a software issue, and the device works perfectly in every other way.
I attempted the 'Emergency firmware install' option via Smart Switch, but the tool does not recognize my device even after the manual entry of Model Name and Serial Number.
Is there some other way I could try to get this issue fixed? Any help or suggestion would be much appreciated. Thanks!
Click to expand...
Click to collapse
Could try faking the IMEI number through some apps, if you still have the box. Otherwise I think it's a lost cause since IMEI number is the device "identity Card number/SSN" as to so to speak.
Sent from my SM-G610F using Tapatalk

Thanks. I still 'know' the IMEI numbers of the device (there are two, being a dual SIM phone) as it is there in the box and under the back cover. Do you mean to say there is no way to flash that info back to the device? Maybe something like a template EFS file to which the info can be added through some tool? Just wondering..

trabant123 said:
Thanks. I still 'know' the IMEI numbers of the device (there are two, being a dual SIM phone) as it is there in the box and under the back cover. Do you mean to say there is no way to flash that info back to the device? Maybe something like a template EFS file to which the info can be added through some tool? Just wondering..
Click to expand...
Click to collapse
Your best chance is to restore other working j7 efs partition but i think after that you will have that device imei

messi2050 said:
Your best chance is to restore other working j7 efs partition but i think after that you will have that device imei
Click to expand...
Click to collapse
The hard part is to find another working efs for this phone which I could possibly use as template for other tools that can alter the IMEI.. I did a bit of googling, but it didn't throw up results other than some password protected zips.
Will do a bit of hunting. Thanks..

messi2050 said:
Your best chance is to restore other working j7 efs partition but i think after that you will have that device imei
Click to expand...
Click to collapse
nope thats not need ive fixed this problem in more than 10 devices like j7 2016 and prime all fixed

Oves786 said:
nope thats not need ive fixed this problem in more than 10 devices like j7 2016 and prime all fixed
Click to expand...
Click to collapse
sir ,plz help , nast night i have installed custom rom "port Note 7 " on my galaxy j7 2016 SM-J710fn , and now its not recognizing SIM Card and Baseband number and IEMI number are also null , Plzzz help as soon as posiible

I Have Same Problem. But After Flashing 4 File Firmware By Sidrose01 For J710FN With Odin. Thats problem Solved. I Use Odin Because Smart Switch Doesnt Work. Sorry for my bad English. But your CSC will be Changed.

If ALL you have done is wipe the SYSTEM partition I don't see how the EFS could be lost/corrupted.
My advice would be to first attempt downgrading the current firmware version( IE Android 7 to 6) via ODIN, this in its self can fix many erroneous issues.
Then, Irrespective of whether the device boots or not afterwards, update to the latest firmware. The essential part is that the device auto boots to recovery after flashing with Odin and completes the update.
Or as posted above find the factory 4 file firmware and flash that. Be aware this will likely wipe your device.

J710fn baseband missing
Hi...
I lost my j710fn 2016 baseband file.. network not working.
Plz any one help me how to restore my mobile

srionlyforu said:
Hi...
I lost my j710fn 2016 baseband file.. network not working.
Plz any one help me how to restore my mobile
Click to expand...
Click to collapse
More info needed. How did it happen?

ashyx said:
More info needed. How did it happen?
Click to expand...
Click to collapse
Unfortunately I wiped all partition in twrp recovery
---------- Post added at 01:32 PM ---------- Previous post was at 01:11 PM ----------
ashyx said:
More info needed. How did it happen?
Click to expand...
Click to collapse
Unfortunately I wiped all partition in twrp recovery

..

ashyx said:
More info needed. How did it happen?
Click to expand...
Click to collapse
I'm created the back up... but it's not stored in my SD card I think I missed the file

srionlyforu said:
I'm created the back up... but it's not stored in my SD card I think I missed the file
Click to expand...
Click to collapse
From TWRP terminal can you post the output of:
ls -laR /dev/block > /sdcard/block_device.txt
.

srionlyforu said:
Unfortunately I wiped all partition in twrp recovery
---------- Post added at 01:32 PM ---------- Previous post was at 01:11 PM ----------
Unfortunately I wiped all partition in twrp recovery
Click to expand...
Click to collapse
ashyx said:
More info needed. How did it happen?
Click to expand...
Click to collapse
ashyx said:
From TWRP terminal can you post the output of:
ls -laR /dev/block > /sdcard/block_device.txt
.
Click to expand...
Click to collapse
it shows can't create /sdcard//block_device.txt : nonexistent

srionlyforu said:
it shows can't create /sdcard//block_device.txt : nonexistent
Click to expand...
Click to collapse
You've got two / between sdcard and block

ashyx said:
You've got two / between sdcard and block
Click to expand...
Click to collapse
sorry i mistakenly typed two //.. but it show one/

srionlyforu said:
sorry i mistakenly typed two //.. but it show one/
Click to expand...
Click to collapse
I suggest you use adb and copy and past the command.
Also is your internal storage /data mounted?

ashyx said:
I suggest you use adb and copy and past the command.
Also is your internal storage /data mounted?
Click to expand...
Click to collapse
The system cannot find the path specified.
---------- Post added at 03:54 PM ---------- Previous post was at 03:53 PM ----------
srionlyforu said:
The system cannot find the path specified.
Click to expand...
Click to collapse
C:\Users\sri>ls -laR /dev/block > /sdcard/block_device
The system cannot find the path specified.
C:\Users\sri>