I have rooted my Nokia3 (7.11 Nougat) and then tried to the following method to hack the miracast:
/system/build.prop
persist.debug.wfd.enable=1
persist.sys.wfd.virtual=0
persist.sys.wfd.appmonitoring=1
persist.debug.wfd.appmonitoring=1
/system/etc/wfdconfig.xml (Nokia 3 does not have this file, so I copied it from other devices)
<ContentProtection>
<Valid>0</Valid>
Now I get miracast. It can find out any miracast sink but failed in the connection step "M6" and got "403 Forbidden" message.
You could google the key word: miracast rtsp m6
m4: dropbox/s/3l1wnxvwe366k9u/M4.jpg
M5: dropbox/s/l73toy48z2ussk1/M5.jpg
M6: dropbox/s/bjrfpkkztc8apsi/M6.jpg
How to solve this problem? Thanks a lot.
have you found a solution yet sir?
No, I still have no solution.
Related
hi,
to test the compatibility with "usb audio recorder pro" i have just successfully connected a freelander px2 with a behringer uca 200
after doing "framaroot":selekting "SuperSU"
and check t it with "root checker" .
i think many people will be happy to hear that.
did somebody have success connecting the freelander without rooting?
Freelander PX2 Rooted
willy wichtig said:
hi,
to test the compatibility with "usb audio recorder pro" i have just successfully connected a freelander px2 with a behringer uca 200
after doing "framaroot":selekting "SuperSU"
and check t it with "root checker" .
i think many people will be happy to hear that.
did somebody have success connecting the freelander without rooting?
Click to expand...
Click to collapse
Sorry if not quite the right answer - However, my comment may help someone - rooting my PX2 was easier than I expected. One step was to transfer framaroot.apk to my PX2 and then I ran the apk and selected super su and it installed and after re boot it was installed and I was able to deal with some files in the never seen before areas of the px2. that i wanted to adjust. and thats all...
Does anybody know of custom ROM that supports Miracast on Tab 2 7"?
Thanks
Nobody? Anybody?
lepa71 said:
Does anybody know of custom ROM that supports Miracast on Tab 2 7"?
Thanks
Click to expand...
Click to collapse
Hi guys
You doesn't need any of the patches or 3rd party apps.
You just need to follow these steps in order to use cast screen in custom roms:
1. Just enable wifi 'on'
2.Open cast & it shows all available devices:fingers-crossed:
Only chromecast works without any changes by default.
Here's something from CM13/LineageOS13 Thread you could try:
EDragon_ said:
(...)
My Telefunken TV wasnt recognized in Settings>Display&lights>Cast.
So i added this lines to build.prop:
Code:
# Wfd display
persist.sys.wfd.virtual=0
persist.debug.wfd.enable=1
After this i could enable Wireless Display and my TV was found.
If i choose the TV Lineage trys to connect but it doesnt work. The TVScreen turns black and thats all.
(...)
Click to expand...
Click to collapse
EDragon_ said:
(...)Ive found the solution.
In the Developer Options i have to activate Wireless Certification.
Back to Display&lights>Cast ive enabled Autonomous Go.
By choosing the TV again Linage shows an Security Code on the TV Screen.
The Code has to be entered on Tab. Abracadabra the Widi is working. (...)
Click to expand...
Click to collapse
I've been looking for a working MAC spoofer solution (app/mod/patch) for a test phone running Android Marshmallow but I didn't find anything that works.
currently the test device is a LG G3 running fulmics ROM 5.0 (based on Android marshmallow / LG 30F), but it seems the matter is rather android 6.x related.
The Aim is to change/spoof temporarily or permanently the hardware MAC address of the internal network adapter (eth0, but mainly wlan0).
So there are a lot of apps out there in the market which claim to do exactly that. I tried many of them, but nothing works as intended.
To name a few of them:
- Wifi Mac Changer
- ChameleMAC
- Mac Address Ghost
- MacChanger
- MacSpoofer
- many more tested
- Phone ID Changer / Device ID Changer app/module for xposed
even the most promising one:
- Pry-Fi by chainfire
does not work, it just crashes while trying to spoof.
all of them claim to change the mac, but it's not working on this device or general on an android 6.x version.
either they crash or they fail in spoofing.
so I tried to spoof the MAC manually in a Terminal with BusyBox installed and a command like:
busybox ifconfig wlan0 hw ether 00:11:22:33:44:55, checked if it worked with iplink cmd and it did. But when I try to connect to my access point, I can't join the wifi network it always neglects my pw. when I turn wifi on/off, the MAC gets reset to original hardware MAC and I can again connect to my wifi AP.
So even when trying to spoof the MAC manually it doesn't work.
And I don't know if it is a problem with Android 6.x, the device itself or the ROM i used.
Does anybody else have a working mac spoofer solution for an Android 6.x version smartphone or have an idea how to this working?
Did you also try connecting to an open network after the busybox method ? I read somewhere the pw issue was only when connecting to secured networks.
Other than that ... I'm also looking for a reliable solution. No luck so far.
Also , you might want to try / read http://forum.xda-developers.com/android/apps-games/app-network-ghost-mac-hostname-spoofer-t3145866
Is explains why the busybox method fails with WPA networks.
thanx for the link. It was interesting.
unfortunately the app doesn't work either. so we still have no working solution or app that does spoof the mac on marshmallow devices.
Hello
Is there a way to enable Hidden SSID function in Android M?
I use CM13 , and I have checked it over and over again,but just can't hidden SSID when I open hotspot.
Please help me QwQ
I have purchased iFfalcon K2A 55" TV by TCL. It runs on certified Google Android 7.0.
I have tried to gain ADB access for giving some permissions on apps that I installed, but to no avail. I don't get proper connection on device id connected.
I have checked that the port 5555 is closed.
Following are the open ports:
2121 ftp, 4332, 6466, 6467, 6550, 6553, 6557, 6559, 7983, 7989, 8008, 8009, 9000, 12104, 32776, 39520, & 46288.
Someone please help me in gaining proper ADB connection.
Open Settings, Select Apps, select your app, click permissions. Set permissions.
MiteshSanghvi said:
Open Settings, Select Apps, select your app, click permissions. Set permissions.
Click to expand...
Click to collapse
What kind of permission? Can you elaborate it?
https://forum.xda-developers.com/shield-tv/general/iffalcon-tv-india-rom-links-t3892518
osrox said:
https://forum.xda-developers.com/shield-tv/general/iffalcon-tv-india-rom-links-t3892518
Click to expand...
Click to collapse
Awesome.
I have 55" K2A 4K Tv.
My 55K2A is Android 7 & the file you posted above for my model is v8, is it Android 8 update for my tv?
Can you help in rooting it?
tariq2kn said:
Awesome.
I have 55" K2A 4K Tv.
My 55K2A is Android 7 & the file you posted above for my model is v8, is it Android 8 update for my tv?
Can you help in rooting it?
Click to expand...
Click to collapse
i think you might have figured how to root it