Related
Just applied the invisibleshield and im not too impressed.
First, the front and more so the back covers are too small and the corners of the phone is not covered. Second, the home key cover and camera lens cover are too big, so I avoided the home button cover and stuck the camera lens on by taking off the back cover. Third and finally the tacky feel means its a fingerprint and oil magnet, as I have sweaty hands this is especially annoying.
On the plus side it was relatively easy to put on and remove the bubbles.
sounds like you got the Full Body "Easy Install" version the Full Body "Maximum protection" version would have covered the corners, and have extended wings that goes up the sides.
same here i've a oily face / fingers, Zagg will not work for me as i've posted on other topic, I'll prefer the regular 3M PET screen protectors + a Gel case instead
Does it make the phone any less slippy to hold?
Ollie2 said:
Does it make the phone any less slippy to hold?
Click to expand...
Click to collapse
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
would u mind to put some pics ???
i've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
i had the invisi shield on my touch hd, so the first thing i did when i got home from getting my shiny new SGS was to order one, still not arrived and thats with 2-3 day delivery. i did the right thing and ordered the full cover as it was the same price as the easy install version, i will post pics when i have recieved it and have it done.
as for gel cases i have one of them on order also as it has done a wonderfull job of protecting my touch hd (till i drove over it)
i gave up on the zagg, samsung is release nice fashion faceplates for the SGS
and i'm already using those nice gel cases + screen protector, that's more than enough protection for the phone.
out of the box, the phone is already super strong, and anti scratch, did you see the video?
it will only break the screen if you drop it from a 1.5 m high
it may be anti scratch but ive scratched the proximity sensor area already so hopefully the shield will stop other scratches. I would use a gel cover but the shield really doesnt add anything to the thickness, while the cover would.
I get some pics up as soon as I can get hold of a camera.
shohid1234 said:
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
Click to expand...
Click to collapse
Thanks for the reply.
I've actually bought a silicone case and a screen protector for it and it's made it much more manageable and easier to hold and saved the phone when I dropped it the other day.
j_h3000 said:
would u mind to put some pics ???
I've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
Click to expand...
Click to collapse
1+
1+
1+
what about touch sensitivity?
I installed an invisibleShield as soon as the phone arrived. It's a pain in the ass to install as usual, and I was not able to make the top two corners look good. They've already started to peel off but I guess it's going to take a while before the back has to be replaced so I'm not going to worry about it.
Is it worth it? I'd say yes, even after a year you'll still have a phone that looks brand new. Now, the edges around the phone will probably get a couple of scratches because unlike the shield for the iPhone this one does not cover the chrome/metal/whatever bezel. Not a big deal if you ask me.
So, touch sensitivity? It's good. It's just as sensitive with the shield as without. Your fingers won't glide as well across the surface tho. One more thing which you'll see in the pictures; Dust usually collects around the edges of the shield, there is not much you can do about that. Trust me, the dust looks much worse in a picture than it does irl. You can barely see it.
Pictures:
Front:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0003.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0004.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0005.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0006.JPG
Back:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0008.JPG
I ordered the full body shield as it was half price.
I just used cheap 6 for 1 ebay screen protector as this one has too much of a grip.
As for the back, as said above the top corners just will not fit completely and lift just a tiny bit at the tips.
Getting tiny bubble out results in the orange peel effect. This is because the shield is slightly rubbery and streches as you force out the bubbles.
IMO the shield protects very well, but I cant imagine ever getting the 'perfect' look with it on.
Its far from invisible, due to slight orange peel, minute bubbles which will only turn into more orange peel should I try to force them out.
If I ever buy one again, it will have graphics on it(they have those for iphone etc, perhaps the sgs is too new..) as then the slight imperfections would be less obvious.
Id rate the item 6/10. It doesn't protect the bezel or extreme corners and doesn't look great where it does protect.
thx for the pics. i got the same edge problems on my old iphone too. the zagg shield is ordered, i should get it next week.
MagicOnline said:
i should get it next week.
Click to expand...
Click to collapse
Don't count on it. I ordered mine on the 16th and I still don't have it (on the 25th).
i knew it would not cover the corners properly, it looks ugly when there are little pieces of plastic cropping out of the phone.
For the back I think the Zagg sheild is brilliant, almost full cover and invisible, with no extra bulk, and a little bit more grip.
For the front, I probably prefer a normal screen protector. My wife has a $1 screen protector from flea-baythat is much better to use (although needs more regular cleaning). The zagg is a little tacky meaning your finger doesn't slide as easily (not ideal for Swype).
Fitting:
I gotta confess that I didn't get the back perfect, but mainly because Ifit it in a dimly lit room, the cover edges are hard to see without bright light. I did get the corner 90% by using glad wrap (plastic wrap) tightly pulled over the corners and left overnight (saw this on a youtube demo video).
Also I once helped a colleague who fits 3m window film for a living. I noticed that he used a lot of liquid, so for the front I made up some more liquid, enough to refill the bottle Zagg provide. I used the whole bottle on the front, making fitting much easier, you can just slide tje cover around until it's perfect, then you just push out all the liquid. Using more liquid also seemed to help alleviate any bubbles. Also for the front I used a very bright light (480 lumens bike light) which made it much easier to see exactly where the edges were.
I'm also hoping that Zagg bring out the coloured/patterned backs, which in an email to me they said they would, then I'll use a regular screen protector for the front.
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
I just remixed a new solution: a couple of drops of baby shampoo with water in the bottle supplied. (I think you can use other stuff like washing detergent, but don't take my word, use google (3m film))
From the 3m website:
"3M™ Scotchtint™ Films are professionally applied by skilled, well-trained authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges."
same here
liquid and electronics don't mix
i don't like the idea of having anything wet near my device.
WiseDuck said:
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
Click to expand...
Click to collapse
I just received my Case-mate barely there case today from play.com & thought I'd give a mini review ago.
It comes in a smartly packaged box, upon opening the box you have in your hand a moulded abs plastic shell & a sealed packet containing a screen protector, micro fibre cloth & a piece of soft card.
The shell is easy enough to put on, it's just a simple push to fit design that works really well.
The actual fit of the Case-Mate barely there is superb with the power & volume buttons being easy to access as are the mini usb port & 3.5mm socket while also giving the camera & speaker unobstructed access.
I didn't fit the screen protector, well seeing as Samsung used gorilla glass & the fact that a screen protector isn't going to do much good if you drop it face down (I've seen a few on here with cracked screens) & that someone can do this to one with no ill effect then I see no need.
The Case-Mate barely there itself was purchased to improve the grip of the phone which as we all know is a little slippery & protect the rear cover from getting scratched & knocked, well the Case-Mate barely there does improve my hold on the Galaxy S but not like I was hoping it would .
The case wraps around the rear of the phone following the Galaxy S contours like a second skin, I can see this case giving great protection to the corners & rear of the phone.
So in all a well made case that fit's superbly, gives easy access to the various button & connectors whilst saving corners & back cover from scratching & knocks. And like it's name implies you'll barely notice it's on the phone.
My only gripe is it feels a little to silky for my liking, I was hoping it would have a rubberised back for improved grip something a little like a silicon case feel.
nice review. i just ordered mine, so it's gonna be a long wait before i get it.
Thanks for the review. I also purchased mine, it was shipped today, can't wait to get it.
I know what you mean about the feel of the case. I have one on my ipod touch but only because I couldn't get a Flexishield case for it. I have a Flexishield on my Desire and am about to get one for the SGS. For me it has a better feel to it and fees less slippery.
Great review, I ordered mine about 2 weeks ago. Hopefully it comes in soon
Anyone has pictures of the silver one ? I ordrered it but it won't be there before three days or so.
Very nice case
jonni3 said:
I didn't fit the screen protector, well seeing as Samsung used gorilla glass & the fact that a screen protector isn't going to do much good if you drop it face down (I've seen a few on here with cracked screens) & that someone can do this to one with no ill effect then I see no need.
Click to expand...
Click to collapse
Seriously that keything doesn't mean crap. You think it's the BIG things in your pockets that do the scratches? It's not. Take any sandpaper and swipe ONE time over the glass of the SGS and you'll have tons of scratches, you don't even have to press very hard. It's generally not your keys, a screw or a screwdriver in your pocket that cause scratches, it's tiny grit that does. Every time you wipe the screen you risk scratching it if there's the wrong kind of dirt on either the screen or the cloth you use. That's why people can be however careful and still get scratches, just read around, you'll see. Everyone doesn't bull**** you when they tell you they take good care of their phone.
Ok recieve my silver casemate, some low res pictures here. I'll take very good ones later when I get back a hold of my APN charger.
http://picasaweb.google.com/114505993397088135290/CasemateBarelyThereSilver#5524273441974319986
Anyway just imagine OP's picture with that kind of grey/black/silver reflections.
It looks kinda glossy, how is the feel of the case?
I've noticed with mine it's started to feel a bit more rubberized now it's been handled.
@ mickeko
About the screen protector you have a valid point & I am now going to have to rethink not having one.
Sent from my GT-I9000 using XDA App
Yea the screen protector looks ugly ^^ it breaks the harmony of the phone in the area around the front facing camera, you can clearly see the protector cutout that is quite ugly. You do not have this problem on silicon cases as they often cover the side cutout. However I would never go without a screen protector without a pouch, the dust level of my pockets are way too random to take the risk of the godamn dust scratches (the silver case also has that little problem, but they are only visible if you search for them micro scratches of doom).
The case feels good, no creaks.
It's not very glossy, or at least I won't call that glossy, in fact it acts like a mirror if you face it at 90° incidence. But if you tilt it even by 5/10 degrees in mid light conditions, it takes a very nice and not glossy dark/grey silver tint similar to the one of the original chrome bezel of the SGS. They both blend very very well. It is really a BARELY THERE experience. very thin, very stylish. Nearly to the level of a naked iphone 4.
Sounds pretty good & seems like your more than happy with it
These case's really complement the phones shape & add very little to the overall dimensions, know what you mean about the screen protector it's not really that attractive, I'm looking for one that covers the entire screen from edge to edge so it doesn't notice.
Looking at your pic's on the pc & it does seem to have that smoked chrome effect like the bezel on the SGS
Indeed but the SGS bezel is a little more greenish/blueish in tint but it is barely noticable (you had to get me to check it closely in white light to notice it), both have the same reflection behaviour however which is why it blends very nicely.
I also notice a very faint rainbowish halo (probably there from transparent coating material used over the silver layer) in the backplate reflections, well, it's kind of cool actually.
My barely there case just came in, I must say very nice case.
My girlfriend has a cheap ebay one, and this is definitely worth the price.
Good job case-mate
epicfailguy2 said:
Anyone has pictures of the silver one ? I ordrered it but it won't be there before three days or so.
Click to expand...
Click to collapse
Just a heads up. I had a metallic 'silver' case-mate barely there on my Desire and it murdered the 3G signal strength. Swapped it for the plain black and it was fine. Dunno if you have that issue with the SGS.
Signal is the same, didn't notice any change 4bars in town.
Just picked mine up today and couldn't be happier with it. Slides in and out of my pocket fairly easily and adds some structural support to the phone which you could argue is a little lacking.
So far I'm very happy with it; I was quite skeptical as I was a long time iPhone (indestructible 2G model) owner and have never used a case.
Haven't had a chance to add the screen protector.
Told you I was going to make it up for the crap ass webcam pictures
http://il.youtube.com/watch?v=OHLglrlRsrw
Where did you guys purchase this at?
EarlZ said:
Where did you guys purchase this at?
Click to expand...
Click to collapse
Asking about Barely there case?
http://shop.ebay.com/?_from=R40&_tr...rely+there+galaxy+s&_sacat=See-All-Categories
Although I see there are no black ones or metallic at the moment, only pink
Just got mine two days ago and must say this is the perfect case for my SGS, could be a little less slippery, but still definitely worth it's money.
Since this was my first install of a glass screen protector, I didn't know what to expect. I was glad to find out that the install process seemed easier than any InvisibleSHIELD I've done in the past. The results are great so far. No bubbles and the screen is beautiful.
I have tons of cases laying around so I'll add to this post and give a run down of how things go.
Verified OKAY
Spigen Slim Armor
Incipio DualPro SHINE (a little tight... place 1st layer on perfectly before slipping into outer layer)
Speck CandyShell
Trident Aegis Series (doesn't fit 100% perfectly on top edges... still okay)
Not Working
Seidio SURFACE (aka Platinum / PT Best Buy Case) - Will not close completely.
EDIT:
Reply to member questions...
Thanks! Great video...I may have to pick one up.
Sent from my Nexus 10 using xda app-developers app
Just picked up the Spider GLAS. Trying screen protector which is thinner than the GLAS. t. Couldn't be happier with the case, plus it doesn't interfere with my incipio case. Perfect solution for anyone looking for a screen protector.
By the way....there was a back protector in there? Is that just a film to keep your back from getting scratched up if you don't use a case?
flu13 said:
By the way....there was a back protector in there? Is that just a film to keep your back from getting scratched up if you don't use a case?
Click to expand...
Click to collapse
You are correct sir!
Thanks for the video, I'm waiting for my Mime glass screen protector to come in. I'll try to add the aluminium button in before the screen install.
levaryw thought
Does Air View work correctly at the lockscreen? I saw another video where the reviewer mentioned that Air View on the lock screen was a bit off (the shiny dot jumped from one spot to another) and did not follow the finger correctly.
Regarding putting the glass on over your aluminum home button....
It looked like that was slightly difficult, and it also looked like the glass didn't want to go down all the way at first. But maybe that was just the plastic part that got peeled off, because as soon as you peeled that off, the glass looked perfect. Can you elaborate on that?
Hmm, I'm using the Seidio Surface with the MIME Ghost Glass, which at 0.4/0.32mm (there's a discrepancy) is thicker than the Glas.t. The Seidio closes and fits on mine.
However, that's with the stock battery. With the Anker 2600 battery, which is a little thicker than the stock battery, it doesn't close.
vdanasto said:
Does Air View work correctly at the lockscreen? I saw another video where the reviewer mentioned that Air View on the lock screen was a bit off (the shiny dot jumped from one spot to another) and did not follow the finger correctly.
Click to expand...
Click to collapse
Oops. Before making another video, I must have just skimmed over your question. It appears to work fine on the lock screen. Which version did he have? GLAS.t or GLAS.tr?
flu13 said:
Regarding putting the glass on over your aluminum home button....
It looked like that was slightly difficult, and it also looked like the glass didn't want to go down all the way at first. But maybe that was just the plastic part that got peeled off, because as soon as you peeled that off, the glass looked perfect. Can you elaborate on that?
Click to expand...
Click to collapse
It was actually the supplied jelly bean button. It only took some time because I used the alignment around the home button to determine where to drop the GLAS onto the surface pretty much. That and focusing on the sides more than the top. Also, I thought there was a huge bubble down there initially as well. It was the plastic protector though.
screwdestiny said:
Hmm, I'm using the Seidio Surface with the MIME Ghost Glass, which at 0.4/0.32mm (there's a discrepancy) is thicker than the Glas.t. The Seidio closes and fits on mine.
However, that's with the stock battery. With the Anker 2600 battery, which is a little thicker than the stock battery, it doesn't close.
Click to expand...
Click to collapse
I looked at the product quickly and it appears to have a larger opening up top. Since this case really hugs the device, that becomes an issue for the Spigen GLAS.
you giving us the finger in the video? punk lol...
nice headshots lol, if only the glas.t covered over the sensor areas I'd rock one, for now I'm just rocking the spigen ultra crystal since out of the box.
galaxy808 said:
you giving us the finger in the video? punk lol...
nice headshots lol, if only the glas.t covered over the sensor areas I'd rock one, for now I'm just rocking the spigen ultra crystal since out of the box.
Click to expand...
Click to collapse
Oops. Usually I give the video a quick one time over. Must have missed it.
Since I pay for 99% of the stuff seen, and it is my phone, I have to make a choice. Do I make a video and sacrifice a lousy install, or do I poke my head in the shot .
I think they might leave those areas open to ensure they function correctly. It does cover the front facing camera though. If you look at the protector the poster a few above was talking about.... It doesn't appear to cover much of the top at all.
As long as you're rocking something, it's better than nothing. I thousand knives can't damage Gorilla glass, but 1 penny sharing space in the same pocket sure can lol.
yeah I think I prefer the glas.t over the TR just because it's thinner can looks more like nothing's on than the TR with the beveled edges.
I may get it eventually maybe if they have a father's day sale lol, like the 20% off memorial day.
I'm still digging this product. I have some Chinese glass screen protectors, but I'm going to have to give them away for user submitted reviews.
I can't get myself to take the Spigen off the S4.
With the Glas.T Slim do you experience any discomfort from the glass poking into your ear when making phone calls?
Great video. Thanks for sharing! I love SPIGEN products.
Thx for your video. It will help me so much
Ryukouki said:
With the Glas.T Slim do you experience any discomfort from the glass poking into your ear when making phone calls?
Click to expand...
Click to collapse
Not really. I use a case on it always though.
You can feel the edges of the glass if you're moving it around, but if you just place the phone directly up to your ear, you won't notice anything.
It is my pleasure to provide the videos. Thanks for watching.
Let us know if you start getting bubbles around the edge of the screen
a lot of the amazon reviews say bubbles start forming at the edge due to an adhesive issue....
eyecon82 said:
Let us know if you start getting bubbles around the edge of the screen
a lot of the amazon reviews say bubbles start forming at the edge due to an adhesive issue....
Click to expand...
Click to collapse
The phone hasn't been put through a lot of use to date, however as of this weekend my wife is giving up her iPhone 5 and using this regularly. We have a newborn baby and she will be carrying that thing in her purse and back pocket most of the time.
If there are issues, she should be able to get them to appear! I'll report back if anything happens.
Hey,
Im looking for a tempered glass for the z5. Any good manufacturers to look out for?
Thanks
I bought this one. Fits well, has proper cut outs.
http://www.amazon.com/gp/aw/d/B014V...+protector&dpPl=1&dpID=51hV4NHOhOL&ref=plSrch
orzly and maybe roxfit are good too
augie7107 said:
I bought this one. Fits well, has proper cut outs.
Click to expand...
Click to collapse
How is it? does it look cheap?
TriangleMonkey said:
How is it? does it look cheap?
Click to expand...
Click to collapse
It's fine and fits well. Not sure how a 0.9mm thick piece of transparent glass can look cheap or premium for that matter
I ordered CaseBase premium tempered glass from Amazon. However I haven't received it yet and can't use it until November.
I ordered a german brand (or at least its sold under the name "wunderglass" meaning wonder glass; made in china ofc).
The fit is ... not that great tbh. The cut outs are fine and in place, but it has too much space to the bezel of the z5. Is there a brand which produces such glass protectors with a minimal gap to the bezel?
I've tried a lot of different brands and I found none that can compete with StilGut in terms of cut, quality and durability. It's made by a German company as well [in China]. A little pricey, but well worth their cost.
http://goo.gl/mWKMxg
spielnicht said:
I've tried a lot of different brands and I found none that can compete with StilGut in terms of cut, quality and durability. It's made by a German company as well [in China]. A little pricey, but well worth their cost.
http://goo.gl/mWKMxg
Click to expand...
Click to collapse
Excellent! I was just earlier looking for a front + back solution. And 20 bucks for both with 2 year warranty? Pfft, that's cheap.
Spigen's glas.tr slim costs 25$ and it's just a front protector. And it's 0.4mm compared to this StilGut at 0.33mm.
I take it you've got some personal experience of these StilGut protectors?
Q: How's the, uhm, quality I guess, of the oleophobic coating on them? Longevity wise?
I've previously used UltimateShield on my One M7 and on my partner's LG G3. Our gripe with them is how shortlived the coating was.
Didn't take all that long (a little over two months I guess) for the coating to wear off inb4 smudges galore and made the glass NOT easy to clean. Of course any coating will not last indefinitely but still..
P.S. That typo in the thread title made me chuckle, guess it's time for bed...
I got the StilGut front/back kit same day as my phone (Saturday). The cut is perfect as usual. I completely forgot that the Z5 had frosted back glass and wasn't sure if the tempered glass would work but it did. Unfortunately you lose out on the grip of the new glass but until someone puts the phone through some use and report back on whether the frosted glass scratches easily or not, I am not taking chances.
anoke is the best one I have seen/used, fits perfect and has front and back. $8.88 prime
http://www.amazon.com/gp/product/B015E3QY4I?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
spielnicht said:
I got the StilGut front/back kit same day as my phone (Saturday). The cut is perfect as usual. I completely forgot that the Z5 had frosted back glass and wasn't sure if the tempered glass would work but it did. Unfortunately you lose out on the grip of the new glass but until someone puts the phone through some use and report back on whether the frosted glass scratches easily or not, I am not taking chances.
Click to expand...
Click to collapse
Well you could go and sand the back protector.
Sandpaper (the wet kind and with it use water to contain the glass dust, you don't wanna breath that)
A flat surface to put the sandpaper on (a mirror for example)
Tape to hold the sandpaper in place
Elbow grease
Have fun!
Start at a low grit 120 or 240 and work your way up to 600 or 1000 or even 2000 depending on the look you want.
You can get wet sandpaper in kits, that have a variety of different grit, online or from your local hardware store and so on.
I recommend Nillkin 9h+ pro.
Nillkin Amazing H+ always the best glass for all Zs!
Now available also for back, used it for previous Zs and no any single scratch, durable 9h !!!
Can I just buy a front screenprotector and leave the back?
It has a frosted glass back but wouldn't the camera would be damaged without a screen protector.
Also i can't find a brand that has front and back screen guards only front.
Sorry i am new to using smartphones.
Any ideas about privacy screen? Too many people read over my shoulder on crowded trains
coleburns said:
Any ideas about privacy screen? Too many people read over my shoulder on crowded trains
Click to expand...
Click to collapse
Sorry, could not stop laughing imaging you in the train with this, so noone could read over your shoulder.
I saw some sold online, but can not post links here(sure you can find them easily) and I can not say anything about privacy screens because I do not like any screens to be applied to original one. So instead of tampered glass I also have chosen original flip case.
augie7107 said:
I bought this one. Fits well, has proper cut outs.
http://www.amazon.com/gp/aw/d/B014V...+protector&dpPl=1&dpID=51hV4NHOhOL&ref=plSrch
Click to expand...
Click to collapse
I bought this one and I can vouch for the quality. It has the proper cut-outs for the front camera, sensors, and speakers. I've got it wet a few times and it's definitely not going to peel off due to moisture. One of my gripes with the Z5 was that the edges make the edges a little sharp to grip, but now with this tempered glass on it feels like the glass is flush with the edges like the iPhone.
Archos866 said:
I bought this one and I can vouch for the quality. It has the proper cut-outs for the front camera, sensors, and speakers. I've got it wet a few times and it's definitely not going to peel off due to moisture. One of my gripes with the Z5 was that the edges make the edges a little sharp to grip, but now with this tempered glass on it feels like the glass is flush with the edges like the iPhone.
Click to expand...
Click to collapse
And how easy was it to fit?
I have skimmed through the pages in the other tempered glass screen protector threads. I have yet to find a manufacturer who makes an edge to edge protector that adheres to the entire screen rather than just the top and bottom.
My issue is that with a water proof device, anytime it is exposed to water (every day for me as I place it on the shelf in the shower to listen to music), water becomes trapped underneath the tempered glass.
Anyone picked up a model that would remedy this?
no one currently makes one
Why did you feel the need to open a whole new thread for something that has been discussed at length in many other threads? no, there is no solution yet.
Doesn't the official Samsung one do this ?
The official Samsung one is plastic, not glass.
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
which flat one did you get!
Sent from my SM-N930T using Tapatalk
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
I went nude screen on the explosive n7 because i knew i was going to exchange it and i only managed to get one scratch and it was on the edge. I think i know how it happened.
Be careful
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
It feels like **** though. I had an IQ Liquid Shield on my old Note 7, and it felt nice in the hand. Barely a bump in feeling, some around the edges but not really noticeable. This current new Note 7 has factory screen protectors, both front and back. But they feel sharp and edgy, they don't cover the curves. I have actual sleeping nightmares about applying a brand new IQ Liquid Shield protector I already have, and it peeling horribly at corners. fEa.r me..?
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
filthimoney said:
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
Click to expand...
Click to collapse
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
probably not full adhered.
Snowleopard1900 said:
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
Click to expand...
Click to collapse
i tried dozens of them looks just like that, most of them only have adhesive on the sides or the top+bottom. all returned.
i suspect this one will be the same, but its not available to purchase on Amazon yet. Guest i will try this too.
i will report see how it goes. but i have no hope at all.
case friendly and curved too on the design like that..?? dont know thats legit or not.
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
chillsen said:
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
Click to expand...
Click to collapse
Your case doesn't even go around all the edges.
borijess said:
Your case doesn't even go around all the edges.
Click to expand...
Click to collapse
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
chillsen said:
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
Click to expand...
Click to collapse
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice after 12hrs. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
borijess said:
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice too. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
Click to expand...
Click to collapse
maybe it was the way you put it on? as in one side you will comfortable be able to tuck it under but the other side kinda snapped on and slid/lifted the cover in order for the case to snap on?
mahdibassam said:
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
ohblindone said:
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
Click to expand...
Click to collapse
Just installed this. I think i know why most companies only use glue on the top or bottom. The quality of the product is good. The packaging is great but i would rather get something a little more simple and maybe save on the cost.
I have yet to turn on my replacement N7 so i cant speak on clarity but the fit is decent. It even works with my Seidio Dilex case on even though its "full screen"
Here is my one problem so far (its only been an hour since install) there is a slight clicking sound when you press on some areas. The edges etc. This is the reason why i think most companies dont use glue on the sides. I think this is where the clicking sound is coming from. I think i installed it as best as i could but who knows. Maybe its my fault.
Im going to try to use it for a while to see how well it works and if i can stand the clicking sound. This is my 1st glass screen protector for the N7 and i dont think ill try more in the future. I just wanted to try one out.